Evaluation of Mangifera indica, Anacardium occidentale leaf extracts and 0.2% Chlorhexidine gluconate on disinfection of maxillofacial silicone material surface contaminated with microorganisms - An invitro study

Maintenance of the quality and hygiene of maxillofacial prosthesis allows to maintain the health of the residual tissues. Sampling of the maxillofacial prostheses has relieved presence of microbial colonization on silicone surfaces. Cleaning procedures of maxillofacial silicones are done using mechanical means or using adjunctive with chemical means. Cleaning with a 2-4% chlorhexidine gluconate spray or dipping in solution for a minute and then washing under running water can sufficiently condition to reduce the amount of bacterial contamination. Due to rising microorganism resistance and fewer adverse effects, phytoextracts appear to be a viable option. Additionally, the use of excipients derived from plants is provides new opportunities for the pharmaceutical industry into the creation of innovative pharmaceutical products that are sustainable.

Aim

To evaluate and compare the leaf extracts of Mangifera indica (M.indica), Anacardium occidentale(A.occidentale) and 0.2% chlorhexidine gluconate (CHX) on disinfection of maxillofacial silicone material surface contaminated with Staphylococcus aureus (S.aureus) and Candida albicans (C.albicans).

Methods

Of the 150 maxillofacial silicone elastomer silicone samples, 75 samples were contaminated with S. aureus and 75 with C.albicans. The contaminated disc was rolled on blood agar and pre-disinfection Colony Forming Units (CFU) were evaluated followed by subjecting the discs to disinfection protocols. The contaminated discs with S. aureus and C.albicans were disinfected using M.indica leaf extracts, A.occidentale leaf extracts and 0.2% CHX for 10 min. Post-disinfection CFUs were evaluated by rolling the disc on blood agar. The results were tabulated and analysed using dependent t-test, one-way ANOVA and Tukeys multiple posthoc procedure.

Results

Pair-wise comparison of pre-and post-disinfection log CFU counts of S.aureus gave a statistical significance between 0.2% CHX and and M.indica leaf extract. No statistically significant results were found between 0.2% CHX and A.occidentale. Pair wise comparison of the log CFU from pre-disinfection to post-disinfection of C.albicans gave a statistical significance between all the three groups.

Conclusions

In the present study A.occidentale leaf extract and M.indica leaf extract have shown significant reduction in CFU of both the organisms. 0.2% CHX showed the most CFU reduction post disinfection of maxillofacial silicone material surface contaminated S.aureus and C.albicans followed by A.occidentale leaf extracts and M.indica leaf extracts. Given the limitations of the current research, A.occidentale leaf extract and M.indica leaf extract can be used as an alternative for disinfection of maxillofacial silicone prosthesis.

Parry-Romberg Syndrome: Successful Result in a Single Procedure Combining Silicone Implant and Structural Fat Grafting for Severe Facial Deformity

Background

Parry-Romberg syndrome (PRS) is an enigmatic and acquired degenerative condition. It is characterized by a gradual and progressive facial hemiatrophy, after which facial deformities appear unexpectedly in a stable state. The degree of disfigurement depends on tissue involvement, illness onset, and duration. Nowadays, non-invasive treatments with lower morbidity, such as structured fat grafting (SFG) are preferred over traditional operations such as free flaps and bone grafts. However, for severe cases of PRS, multiple sessions of SFG are required.

Case study

Despite the therapeutic failure that a 20-year-old lady had suffered after five previous conventional surgical procedures, the outcome was successful after only one surgical therapy employing a particular combination of SFG and malar silicone elastomers implant (SI).

Conclusion

The author highlights the interest in a combination of non-invasive procedures using SFG and malar augmentation with SI to repair large volume loss while improving symmetry and skin texture. Otherwise, the role of adipose-derived stem cells in fat survival is crucial and should be the focus of future studies and the key to technological advancement.

Complete Denture - Border Molding Technique Using a Laboratory Condensation Silicone Putty: Review

During the fabrication of a complete denture, functional impression is taken. Literature studies show that polydimethylsiloxane (condensation silicone) has not been reported by United States dental schools to perform border molding. Thus, the purpose of this article is to review the functional impression technique when border molding is performed with a laboratory condensation silicone putty.

Digital assessment of properties of the three different generations of dental elastomeric impression materials

BACKGROUND

This study aimed to compare the dimensional accuracy, hydrophilicity and detail reproduction of the hybrid vinylsiloxnether with polyether and polyvinylsiloxane parent elastomers using modified digital techniques and software. This was done in an attempt to aid in solving the conflict between the different studies published by competitive manufacturers using different common manual approaches.

METHODS

A polyether, polyvinylsiloxanes and vinyl polyether silicone hybrid elastomeric impression materials were used in the study. Dimensional accuracy was evaluated through taking impressions of a metallic mold with four posts representing a partially edentulous maxillary arch, that were then poured with stone. Accuracy was calculated from the mean of measurements taken between fixed points on the casts using digital single-lens reflex camera to produce high-resolution digital pictures for all the casts with magnification up to 35×. Hydrophilicity was assessed by contact angle measurements using AutoCAD software. The detail reproduction was measured under dry conditions according to ANSI/ADA Standard No. 19 and under wet conditions as per ISO 4823. A metallic mold was used with three V shaped grooves of 20, 50, and 75 µm width. Specimens were prepared and examination was made immediately after setting using digital images at a magnification of 16×.

RESULTS

The hybrid impression (0.035 mm) material showed significantly higher dimensional accuracy compared to the polyether (0.051 mm) but was not as accurate as the polyvinyl siloxane impression material (0.024 mm). The contact angles of the hybrid material before and after setting was significantly lower than the parent materials. With regard to the detail reproduction, the three tested materials were able precisely to reproduce the three grooves of the mold under dry conditions. Whereas, under wet conditions, the hybrid material showed higher prevalence of well-defined reproduction of details same as polyether but higher than polyvinylsiloxane that showed prevalence of details with loss of sharpness and continuity.

CONCLUSIONS

The digital technique used could be a more reliable and an easier method for assessment of impression materials properties. The hybridization of polyvinyl siloxane and polyether yielded a promising material that combines the good merits of both materials and overcomes some of their drawbacks.

Carboxylic acid mediated antimicrobial activity of silicone elastomers

Due to their high biocompatibility silicone elastomers are the material of choice in many sensitive health care applications. However, the inherent hydrophobicity of the polymer makes silicones more susceptible to spontaneous protein adsorption and subsequent biofilm formation than more hydrophilic abiotic materials. Hence, the development of antimicrobial silicone elastomers could help to reduce potential biofilm-associated infections when using silicone based medical devices. In this study, we describe carboxylic-acid-modified silicone elastomers that are biocompatible and exhibit a specific antimicrobial activity against clinically relevant pathogens even after being stored in common packaging materials.

Soft and elastic hollow microcapsules embedded silicone elastomer films with enhanced water uptake and permeability for mechanical stimuli responsive drug delivery applications

Polydimethylsiloxane (PDMS) film with significantly enhanced water permeability and uptake was prepared by incorporating spherical elastic hollow microcapsules (eHMCs) in it. eHMCs were prepared through O/W/O emulsification method. Water permeability and uptake of the film increased significantly in proportion to the amount of embedded eHMCs while minimizing the changes in elastic characteristics and transparency of PDMS. The release rate of loaded water soluble model drug from the eHMC-embedded PDMS film could be controlled by the magnitude of uniaxial mechanical stimulus applied over the film and initial drug loading amount, with negligible release of drug from the film in the absence of external stimulation. Thus, these biocompatible and elastic composite PDMS films are potentially useful, including as an easily accessible and instantly effective way of controlling hydrophilic drug release using the mechanical stimulus as well as a soft elastomer with enhanced water uptake and permeability.

Breast Implant-Associated Anaplastic Large Cell Lymphoma (BIA-ALCL) and the Textured Breast Implant Crisis

Breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) is an uncommon T-cell, CD-30+/ALK lymphoma. Late (9 years) periprosthetic fluid (seroma) is the most common presentation (90% of the cases). A combination of textured breast implant, bacterial contamination, and genetic predisposition seems to be necessary for BIA-ALCL to occur. There are 35 million patients with implants in the world, and at the present moment, 573 cases of BIA-ALCL have been reported. The risk of developing BIA-ALCL in Australia varies from 1:2832 to 1:86,029, with texture grades 3 and 4 seeming to pose a higher risk than grades 2 and 1. NCCN has established guidelines for diagnosis and treatment, and early diagnosis is the key to cure. At an early stage and for the vast majority of patients, the treatment consists of capsulectomy and implant removal. However, at stages II to IV, a systemic treatment is warranted, including chemotherapy, radiotherapy (residual disease), and brentuximab vedotin. The majority of patients can be cured, and complete capsular removal is the most important factor. So far, 33 patients have died from BIA-ALCL worldwide, with deaths related to delay in diagnosis and treatment. Textured implants have been in the midst of the current implant crisis, and Biocell was recalled worldwide after the latest FDA update on the disease. At the present moment, no medical society or regulatory agency has recommended implant removal. It is about time that we start robust breast implant registries to determine risks. Besides, based on scientific criteria, we must consider all the benefits and risks associated with the available breast devices.Level of Evidence III This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Invited Discussion on: Breast Implant-Associated Anaplastic Large Cell Lymphoma (BIA-ALCL) and the Textured Implant Crisis

The author discusses some important points about breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) and adds new and updated information about the disease (ALCL). LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

A simple and effective method for addition silicone impression disinfection

PURPOSE

Although dental impression disinfection is determinant to reduce the cross-infection risk, some studies have shown that, in real practice, the disinfection procedures vary considerably. Thus, the aim of this study was to evaluate the antimicrobial effectiveness and the impact on the dimensional stability of addition silicone' impressions of water wash and the most clinically used disinfection solutions: 3% hydrogen peroxide, commercial disinfectant MD520 (Durr) and 1% and 5.25% sodium hypochlorite.

MATERIALS AND METHODS

For this investigation, dental impressions were taken on 16 volunteer dental students. The antimicrobial effectiveness of each procedure was evaluated by pour plate method. The dimensional stability was evaluated using a standardized stainless-steel model, according to ANSI/ADA nº19 specification.

RESULTS

The study results showed that water wash does not alter the dimensional stability of addition silicone impressions but doesn't reduce the microbial load of the material (P>.05). On the other hand, addition silicone disinfection by immersion with 3% hydrogen peroxide, MD520 (Durr), or sodium hypochlorite at 1% and 5.25% does not alter the dimensional stability significantly but reduces > 99.9% of the microbial load of the impressions (P<.001).

CONCLUSION

Addition silicone impressions should always be disinfected after water wash in order to reduce effectively the cross-infection risk. All disinfectants tested showed high antimicrobial efficiency without significant changes in three-dimensional shape of impressions. Hydrogen peroxide and sodium hypochlorite are of particular importance because are easily accessible in dental setting. The less explored hydrogen peroxide could be a valuable alternative for silicone impressions disinfection.

Mechanical irritation by protruding bone: A possible cause of breast implant rupture

Although breast implants have been in clinical use for almost 6 decades and have undergone considerable development during this time, implant rupture is still a dreaded long-term complication. Some obvious external factors, such as trauma, can lead to implant rupture, but many studies have reported a high rate of “spontaneous” implant rupture. Herein, we present two cases with the aim of raising awareness of a new possible cause of “spontaneous” implant rupture: mechanical irritation by bony protrusions.

Efficacy of cleansing agents in killing microorganisms in mixed species biofilms present on silicone facial prostheses--an in vitro study

OBJECTIVES

The purpose of this study was to assess the efficacy of different cleansing agents in killing mixed species biofilms on silicone facial prostheses.

MATERIALS AND METHODS

Two bacterial and three yeast strains, isolated from silicone facial prostheses, were selected for the mixed species biofilms. A variety of agents used to clean facial prostheses were employed, viz., antibacterial soap, essential-oil-containing mouth rinse, ethanol 27 %, chlorhexidine mouth rinse, and buttermilk. Colony forming units (CFUs) and live/dead staining were analyzed to assess the efficacy of these cleansing agents against 24-h and 2-week biofilms and regrown biofilms on silicone samples.

RESULTS

Chlorhexidine was the most effective cleansing agent. Chlorhexidine killed 8 log unit CFUs (>99.99 % killing) in a 24-h biofilm and 5 log unit CFUs (>99.99 % killing) in 2-week biofilms. Also, after regrowth and repeated treatment of the biofilm, chlorhexidine was the most effective cleansing agent showing no detectable CFUs. The essential-oil-containing mouth rinse (containing 26.9 % ethanol) showed a similar efficacy as ethanol (27 %) alone. Antibacterial soap and buttermilk were the least effective agents tested.

CONCLUSIONS

Chlorhexidine showed the highest reduction in CFUs in 24-h, 2-week, and regrown mixed species biofilm of microorganisms isolated from silicone facial prostheses.

CLINICAL RELEVANCE

Chlorhexidine mouth rinse (easy obtainable and relatively cheap) is very effective in killing bacteria and yeast present in biofilms on silicone facial prostheses. When applied on a regular basis, cleansing a facial prosthesis with chlorhexidine will presumably increase its lifetime and reduce skin irritations.

Reconstruction of Exenterated Orbit using Combined Surgical and Prosthetic Approach

Reconstruction of an exenterated orbit remains a challenge. Orbital prostheses are nowadays are made of silicone elastomers. A major limitation with silicone orbital prostheses is their relatively short life span. This case report describes the treatment of a patient with an exenterated orbit using a combined surgical and prosthetic approach. The upper and lower eyelids were reconstructed surgically using a deltopectoral flap. A sectional eye prosthesis was made and placed in the modified bottle-neck shaped defect to restore the patient's appearance and confidence.