Peroxymonosulfate/solar radiation process for the removal of aqueous microcontaminants. Kinetic modeling, influence of variables and matrix constituents

New technologies to address the presence of pharmaceutical and personal care products (PPCPs) in wastewater are needed, especially in those cases in which water will be reused. In this work, the activation of peroxymonosulfate (PMS) with simulated solar radiation has been applied to the oxidation of a mixture of six PPCPs, i.e. caffeine, primidone, N,N-diethyl-3-methylbenzamide (DEET), methylparaben, clofibric acid and ibuprofen. The sole application of solar radiation, i.e. solar photolysis, only led to the oxidation of clofibric acid (complete degradation in 90 min). The combination of PMS and solar radiation resulted in the degradation of all target micropollutants. The complete degradation of this mixture at initial 100 ppb was achieved with 0.5 mM of initial PMS after 90 min. A kinetic study that acceptably simulates the experimental data under different conditions has been proposed. The effects of initial PPCP concentration (1 mg L^-1-100 μg L^-1), PMS dose (0.1-5 mM), and pH (3-9) were tested and kinetically simulated. Finally, the PPCPs removal study was carried out in two real water matrices (river and a secondary effluent of an urban wastewater treatment plant). A higher dose of PMS, ten times higher, was required to achieve complete degradation of the micropollutants if compared to ultrapure water.

Simulated solar photo-assisted decomposition of peroxymonosulfate. Radiation filtering and operational variables influence on the oxidation of aqueous bezafibrate

This work investigates the potential of the combination of peroxymonosulfate (PMS) and simulated solar radiation (λ > 300 nm) to remove bezafibrate from aqueous solution. Different solar light filters indicate a higher removal efficiency as the wavelength range used moves to the more energetic region of the solar spectrum. The system PMS/Daylight (300-800 nm) eliminates bezafibrate (1 mg L^-1) in less than 30 min under the best conditions used in this study (C_PMS = 4·10^-4 M) with no pH control (acidic pH). The efficiency of the process significantly improves under alkaline conditions (pH = 10), likely due to a higher PMS photolysis rate. Experiments conducted at different initial concentration of PMS and bezafibrate suggest first order regarding PMS and different from 1 in the case of bezafibrate. Intermediates generated at the beginning of the process have been tentatively identified to propose a hypothetical reaction pathway and to estimate their toxicity.

UV sensitivity of Beauveria bassiana and Metarhizium anisopliae isolates under investigation as potential biological control agents in South African citrus orchards

Seven indigenous entomopathogenic fungal isolates were identified as promising biocontrol agents of key citrus pests including false codling moth, Thaumatotibia leucotreta Meyrick (Lepidoptera: Tortricidae), citrus thrips, Scirtothrips aurantii Faure (Thysanoptera: Thripidae) and citrus mealybug, Planococcus citri (Risso) (Hemiptera: Pseudococcidae) under laboratory conditions. Even though field trials using the two most virulent isolates (Beauveria bassiana G Ar 17 B3 and Metarhizium anisopliae FCM Ar 23 B3) against soil-dwelling life stages of T. leucotreta were positive, foliar application against citrus mealybugs and thrips, has been disappointing. Thus, the UV sensitivity of the seven initial promising isolates (four B. bassiana and three M. anisopliae) in comparison with two commercial isolates (M. anisopliae ICIPE 69 and B. bassiana PPRI 5339) and their formulated products were investigated in this study. All isolates investigated were highly sensitive to UV radiation, and a 2 h exposure to simulated full-spectrum solar radiation at 0.3 W/m² killed conidia of all tested isolates. Nonetheless, variability in susceptibility was found amongst isolates after exposure for 1 h. The most virulent M. anisopliae isolate, FCM Ar 23 B3, was the most susceptible to UV radiation with <3 % relative germination, 48-51 h post-exposure. Whilst isolates of the two mycoinsecticides showed similar susceptibility to UV radiation, their formulated products (vegetable oil and emulsifiable concentrate) were tolerant, when tested for 1 h. These findings indicate that a suitable UV protectant formulation of these fungi or a different application strategy will be required for success against P. citri and S. aurantii.

Simulated solar driven photolytic ozonation for the oxidation of aqueous recalcitrant-to-ozone tritosulfuron. Transformation products and toxicity

This work reports the combination of ozone and solar radiation as an advanced oxidation process to remove the herbicide tritosufuron (TSF) in water. Firstly, the recalcitrance of TSF has been assessed, obtaining an ozonation second order rate constant of 5-154 M^-1 min^-1 in the range of pH from 5 to 8; while the rate constant with HO was found to be (1.8-3.1)·10⁹ M^-1 s^-1. Secondly, the simultaneous application of simulated solar radiation in between 300 and 800 nm and ozone resulted positive in the oxidation rate of TSF. Mineralization extent was also higher. Less effective oxidation was achieved after limiting the radiation to the range 360-800 nm or 390-800 nm; also completely inappropriate for mineralization. Thirdly, the detected transformation products (TPs) demonstrated the vulnerability of TSF molecule to be attacked by HO in the sulfonylurea bridge. The combination of ozone and radiation of 300-800 nm led to the most effective removal of the TPs. Finally, after the photolytic ozonation treatment toxicity was also evaluated in terms of phytotoxicity towards the germination and root elongation of Lactuca Sativa seeds, and toxicity by immobilization tests of Daphnia Magna.

Review of titanium dioxide nanoparticle phototoxicity: Developing a phototoxicity ratio to correct the endpoint values of toxicity tests

Titanium dioxide nanoparticles are photoactive and produce reactive oxygen species under natural sunlight. Reactive oxygen species can be detrimental to many organisms, causing oxidative damage, cell injury, and death. Most studies investigating TiO2 nanoparticle toxicity did not consider photoactivation and performed tests either in dark conditions or under artificial lighting that did not simulate natural irradiation. The present study summarizes the literature and derives a phototoxicity ratio between the results of nano-titanium dioxide (nano-TiO2 ) experiments conducted in the absence of sunlight and those conducted under solar or simulated solar radiation (SSR) for aquatic species. Therefore, the phototoxicity ratio can be used to correct endpoints of the toxicity tests with nano-TiO2 that were performed in absence of sunlight. Such corrections also may be important for regulators and risk assessors when reviewing previously published data. A significant difference was observed between the phototoxicity ratios of 2 distinct groups: aquatic species belonging to order Cladocera, and all other aquatic species. Order Cladocera appeared very sensitive and prone to nano-TiO2 phototoxicity. On average nano-TiO2 was 20 times more toxic to non-Cladocera and 1867 times more toxic to Cladocera (median values 3.3 and 24.7, respectively) after illumination. Both median value and 75% quartile of the phototoxicity ratio are chosen as the most practical values for the correction of endpoints of nano-TiO2 toxicity tests that were performed in dark conditions, or in the absence of sunlight.

Photodegradation of antibiotics under simulated solar radiation: implications for their environmental fate

Roxithromycin, erythromycin, ciprofloxacin and sulfamethoxazole are frequently detected antibiotics in environmental waters. Direct and indirect photolysis of these problematic antibiotics were investigated in pure and natural waters (fresh and salt water) under irradiation of different light sources. Fundamental photolysis parameters such as molar absorption coefficient, quantum yield and first order rate constants are reported and discussed. The antibiotics are degraded fastest under ultraviolet 254 nm, followed by 350 nm and simulated solar radiation. The composition of the matrix (pH, dissolved organic content, chloride ion concentration) played a significant role in the observed photodegradation. Under simulated solar radiation, ciprofloxacin and sulfamethoxazole degrade relatively quickly with half-lives of 0.5 and 1.5h, respectively. However, roxithromycin and erythromycin, macrolides are persistent (half-life: 2.4-10 days) under solar simulation. The transformation products (15) of the targeted antibiotics produced under irradiation experiments were identified using high resolution mass spectrometry and degradation pathways were proposed.