Ultrathin ultrastrong transparent films made from regenerated cellulose and epichlorohydrin

Thin films used in electronic devices are often petroleum-based, non-biodegradable, and non-renewable polymers. Herein, ultrathin ultrastrong regenerated cellulose films were made with a facile method by applying a solution of mildly carboxylated nanocellulose and various amounts of epichlorohydrin (ECH) as a crosslinker. The morphology and physiochemical properties of films were measured using FE-SEM, TEM, FTIR, NMR, UV-Vis, XRD, DLS, and TGA. Carboxylated cellulose with a charge content of 1.5 mmol/g was prepared to make alkaline dopes containing nanocrystalline cellulose (CNC). Then, ECH (0-50%) was added and the dope was blade cast, dried in an oven, regenerated in an acid bath, washed, and air dried to make uniform films approximately 1 μm thick. The tensile stress and elastic modulus of the films were measured and found to be 100-300 MPa and 5-12.7 GPa, respectively. Higher amounts of ECH led to stronger films. All films were over 96% transparent, insoluble in water, and absorbed 24-28% moisture. TGA analysis showed ultrathin films were thermally resistant up to 250 °C and were stable and unchanged over a month at 105 °C showing excellent thermal aging resistance. Overall, films with 5-10% ECH are extremely strong, which makes them promising bioresource-based candidates for flexible electronic applications.

Understanding the (dis)-assembly of in situ forming hydrogel coatings in a 2D model system

HYPOTHESIS

Injectable hydrogels are important in situ forming implants for tissue regeneration at damaged sites. Understanding the behavior of these systems in a complex in vivo environment remains a challenge. Ultrathin films as 2D model systems are expected to provide fundamental insights into formation and (bio)degradation at material-liquid interfaces, and are also applicable as bioresponsive coatings.

EXPERIMENTS

Hydrogel ultrathin films are prepared by covalently cross-linking four-arm PEG macromers with maleimide end-groups (PEG4MAL) at alkaline pH using two different types of dithiol-bearing cross-linkers - thio-depsipeptide (TDP) or 3,6-Dioxa-1,8-octanedithiol (DODT). This thiol-Michael addition "click" reaction is carried out at the air-water interface using the Langmuir technique. Morphological observation in real time is carried out by Brewster angle microscopy (BAM) and in coatings using atomic force microscopy (AFM). Stability against enzymatic and oxidative degradation is evaluated in the same setup.

FINDINGS

Non-cross-linked PEG or PEG incubated with cross-linkers at slightly acidic pH desorbs from the interface over time. Cross-linking of PEG at alkaline pH renders 2D hydrogel networks (thickness <1 nm) that are stable against desorption. They are easily transferrable onto solid mica surfaces, forming homogenous coatings as revealed by AFM. The type of dithiol cross-linker used to form the branching centers influences the degradability of these 2D hydrogel networks in the presence of lipase, peroxides, or bases. For example, enzymatic degradation of the 2D hydrogel networks can be switched "on" or "off" depending on the cleavable sites in the cross-linkers.

Shadow-casted ultrathin surface coatings of titanium and titanium/silicon oxide sol particles via ultrasound-assisted deposition

Ultrasound-assisted deposition (USAD) of sol nanoparticles enables the formation of uniform and inherently stable thin films. However, the technique still suffers in coating hard substrates and the use of fast-reacting sol-gel precursors still remains challenging. Here, we report on the deposition of ultrathin titanium and titanium/silicon hybrid oxide coatings using hydroxylated silicon wafers as a model hard substrate. We use acetic acid as the catalyst which also suppresses the reactivity of titanium tetraisopropoxide while increasing the reactivity of tetraethyl orthosilicate through chemical modifications. Taking the advantage of this peculiar behavior, we successfully prepared titanium and titanium/silicon hybrid oxide coatings by USAD. Varying the amount of acetic acid in the reaction media, we managed to modulate thickness and surface roughness of the coatings in nanoscale. Field-emission scanning electron microscopy and atomic force microscopy studies showed the formation of conformal coatings having nanoroughness. Quantitative chemical state maps obtained by x-ray photoelectron spectroscopy (XPS) suggested the formation of ultrathin (<10nm) coatings and thickness measurements by rotating analyzer ellipsometry supported this observation. For the first time, XPS chemical maps revealed the transport effect of ultrasonic waves since coatings were directly cast on rectangular substrates as circular shadows of the horn with clear thickness gradient from the center to the edges. In addition to the progress made in coating hard substrates, employing fast-reacting precursors and achieving hybrid coatings; this report provides the first visual evidence on previously suggested "acceleration and smashing" mechanism as the main driving force of USAD.

Ultrathin organic semiconductor films--soft matter effect

The growth of organic semiconductor thin films has been a crucial issue in organic electronics, especially the growth at the early stages. The thin-film phase has been found to be a common phenomenon in many organic semiconductor thin films, which is closely related with the weak van der Waals interaction between organic molecules, the long-range interaction between organic molecules and the substrate, as well as the soft matter characteristics of ultrathin films. The growth behavior and soft matter characteristics of the thin-film phase have great effects on thin film morphology and structure, for example, the formation and coalescence of grain boundaries, which further influences the performance of organic electronic devices. The understanding of thin-film phase and its intrinsic quality is necessary for fabricating large-size, highly ordered, continuous and defect-free ultrathin films. This review will focus on the growth behavior of organic ultrathin films, i.e., the level of the first several molecular layers, and provide an overview of the soft matter characteristics.