Optimization of urban waste fermentation for volatile fatty acids production

The problem of waste disposal has recently focused on practices for waste recycling and bio-resources valorization. Organic waste produced in urban context together with biological sludge produced in wastewater treatment plants (WWTPs) can be used as renewable feedstock for the production of building blocks of different products, from biopolymers to methyl esters. This paper deals with the optimization of the fermentation process in order to transform urban organic waste (a mixture of pre-treated food waste and biological sludge) into added-value volatile fatty acid (VFA) rich stream, useful for biological processes within a biorefinery technology chain. Different temperatures, pH, hydraulic retention times (HRTs) and organic loading rates (OLRs) were tested both in batch and continuous trials. Batch tests showed the best working conditions at 37 °C and pH 9, using the bio-waste feedstock thermally pre-treated (76 h at 72 °C). These conditions were applied in continuous process, where higher HRT (6.0 d) and lower OLR [7.7 kg VS/(m³ d)] gave the best performances in terms of process yield and maximum VFA level achieved: 0.77 COD_VFA/VS₍₀₎ and 39 g COD_VFA/L. An optimized fermentation process is crucial in a biorefinery perspective since it has to give a final stream of constant composition or tailored products suitable for further applications.

Optimizing the synergistic effect of sodium hydroxide/ultrasound pre-treatment of sludge

Ultrasound (ULS), sodium hydroxide (NaOH) and combined ultrasound/NaOH pre-treatment were applied to pre-treat waste activated sludge and improve the subsequent anaerobic digestion. Synergistic effect was observed when NaOH treatment was coupled with ultrasound treatment. The highest synergistic Chemical Oxygen Demand (COD) solubilization was observed when 0.02M NaOH was combined with five minutes ultrasonication: an extra 3000 mg/L was achieved on top of the NaOH (1975 mg/L) and ultrasonication (2900 mg/L) treatment alone. Further increase of NaOH dosage increased Soluble Chemical Oxygen Demand (SCOD), but did not increase the synergistic effect. Nine and 18 minutes ultrasonication led to 20% and 24% increase of methane production, respectively; Whereas, 0.05M NaOH pre-treatment did not improve the sludge biodegradability. Combined ultrasound/NaOH (9 min+0.05 M) showed 31% increase of methane production. A stepwise NaOH addition/ultrasound pre-treatment (0.02M+ULS for 5 min+0.02M+ULS for 4 min) was tested and resulted in 40% increase of methane production using 20% less chemicals.

Combined ultrasonication and thermal pre-treatment of sewage sludge for increasing methane production

This article focuses on the combination of ultrasonic and thermal treatment of sewage sludge (SS). The combination involved ultrasonicating a fraction of the sludge and thermal treatment at various temperatures and this resulted in solubilization of proteins and carbohydrates, and so contributing to increased COD solubilization. During the treatment, SCOD, soluble proteins and carbohydrates increased from 760 mg L(-1) to 10,200 mg L(-1), 110 mg L(-1) to 2,900 mg L(-1) and 60 mg L(-1) to 630 mg L(-1), respectively. It was found ultrasonication of only a fraction of the sludge (>20%) followed by thermal treatment led to significant improvement compared to thermal and ULS treatments applied on their own. At 65°C, the kinetic of solubilization was improved and the hyper-thermophilic treatment time could be reduced to a few hours when ultrasonication was used first. A linear correlation (R(2) = 95%) was found between the SCOD obtained after ultrasonication pre-treatment and anaerobic biodegradability. The combined treatment resulted in 20% increase in biogas production during the anaerobic digestion of the pre-treated sludge.