Slow freezing cryopreservation of Korean bovine blastocysts with an additional sucrose pre-equilibration step

Introduction

Embryo cryopreservation is a valuable technique used for preserving genetic resources for long periods. However, the survival rate of embryos is dependent on the method used. Therefore, in this study, we evaluated the efficiency of slow freezing method but with an additional dehydration step prior to freezing to overcome the formation of ice crystals.

Methods

Oocytes collected from the ovaries of native Korean cattle subjected to in vitro fertilization were cultured for 7 days until the formation of expanded blastocysts. Before freezing, the blastocysts were placed in four pre-equilibration media: a control medium with no addition of sucrose, and three experimental media with the addition of 0.1, 0.25, and 0.5 M sucrose, respectively. Then, the pre-equilibrated embryos were frozen. Embryo survival and hatching rates were evaluated morphologically at 24, 48, and 72 h after thawing. Immunofluorescence staining, terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) assay, and gene expression analysis of the re-expanded blastocytes were examined 24 h after freeze-thawing.

Results

The survival rate was significantly higher in the 0.1 M group than in the control group (p < 0.05), and the hatching rate at 72 h was significantly higher in the 0.25 and 0.5 M groups than in the control group (p < 0.05). TUNEL-positive cells were significantly lower in the 0.25 M group than in the control group (12.5 ± 0.9 vs. 8.3 ± 0.8; p < 0.05). The gene expression of BCL2 associated X, heat shock protein 70 kDa, and aquaporin 3 in the 0.25 M group was significantly lower than that in the control group (p < 0.05).

Conclusion

Our study revealed that treatment with 0.25 M sucrose before slow freezing improved the viability of bovine embryos after freeze-thawing.

Use of Antifreeze Protein from Tenebrio molitor (TmAFP) in Vitrification of In Vitro-Produced Bovine Embryos: An Ultrastructural Study

The objective of this study was to evaluate the effects of different concentrations of antifreeze protein (AFP) extracted from the larva of the beetle, Tenebrio molitor (TmAFP), on vitrification of in vitro-produced bovine embryos. In vitro-produced blastocysts were divided into three experimental groups and vitrified using a cryotop. TmAFP was added to the equilibrium solution (ES) and vitrification solution (VS) at a concentration of 0 ng/mL (control), 500 ng/mL (500TmAFP), or 1000 ng/mL (1000TmAFP). Vitrification was carried out by first placing the blastocysts in ES for 2 minutes (7.5% ethylene glycol [EG] and 7.5% dimethyl sulfoxide [DMSO]). The blastocysts were then transferred to VS (15% EG and 15% DMSO) and promptly deposited on a cryotop stem and submerged in liquid nitrogen. Warming was carried out in three steps with decreasing sucrose concentrations. After warming, the blast cells were cultured for 24 hours for subsequent survival analysis and ultrastructural evaluation. There was a significant difference in the survival rate and expansion in the 500TmAFP group compared with the other groups. The ultrastructural analysis revealed intracellular lesions in all vitrified embryos; however, the embryos of the 500TmAFP and 1000TmAFP groups showed fewer cytoplasmic lesions compared with the control group. Taken together, addition of TmAFP can mitigate cellular changes that involve organelles and cellular components essential for proper functioning and improve the viability of warmed and vitrified in vitro-produced bovine embryos.

Bioreactor Production Process of Spodoptera frugiperda multiple nucleopolyhedrovirus Biopesticide

Spodoptera frugiperda (fall armyworm) is one of the most important maize pests in the world and the baculovirus Spodoptera frugiperda multiple nucleopolyhedrovirus (SfMNPV), a natural pathogen of this pest, has been used as a biopesticide for its control. At present, in vivo strategies at the commercial scale are employed by multiplying the virus in the host insect in biofactory facilities; however, in vitro large-scale production is an interesting alternative to overcome the limitations of baculoviruses massal production. This study aimed to develop the process of the SfMNPV in vitro production by evaluating the effects of different multiplicities of infection (MOI) and nutritional supplements, morphological and molecular analysis of the infection on the growth of Sf9 cells and virus production. The Bioreactor Stirred Tank Reactor (STR) approach with glutamine-supplemented Sf-900 III serum free culture medium, combined with the MOI of 1.0, showed the best viral production performance, with a specific productivity above 300 occlusion bodies (OBs)/cell and volumetric productivity of 9.0 × 1011 OBs/L.

Unraveling the Consequences of Oxygen Imbalance on Early Embryo Development: Exploring Mitigation Strategies

Although well-established and adopted by commercial laboratories, the in vitro embryo production system still requires refinements to achieve its highest efficiency. Early embryonic development is a dynamic event, demanding suitable conditions to provide a high number of embryos with quality and competence. The first step to obtaining an optimized in vitro environment is to know the embryonic metabolism and energy request throughout the different stages of development. Oxygen plays a crucial role in several key biological processes necessary to sustain and complete embryonic development. Nonetheless, there is still controversy regarding the optimal in vitro atmospheric concentrations during culture. Herein, we discuss the impact of oxygen tension on the viability of in vitro-produced embryos during early development. The importance of oxygen tension is addressed as its roles regarding essential embryonic traits, including embryo production rates, embryonic cell viability, gene expression profile, epigenetic regulation, and post-cryopreservation survival. Finally, we highlight the damage caused by in vitro unbalanced oxygen tensions and strategies to mitigate the harmful effects.

Pre-Implantation Bovine Embryo Evaluation-From Optics to Omics and Beyond

Approximately 80% of the ~1.5 million bovine embryos transferred in 2021 were in vitro produced. However, only ~27% of the transferred IVP embryos will result in live births. The ~73% pregnancy failures are partly due to transferring poor-quality embryos, a result of erroneous stereomicroscopy-based morphological evaluation, the current method of choice for pre-transfer embryo evaluation. Numerous microscopic (e.g., differential interference contrast, electron, fluorescent, time-lapse, and artificial-intelligence-based microscopy) and non-microscopic (e.g., genomics, transcriptomics, epigenomics, proteomics, metabolomics, and nuclear magnetic resonance) methodologies have been tested to find an embryo evaluation technique that is superior to morphologic evaluation. Many of these research tools can accurately determine embryo quality/viability; however, most are invasive, expensive, laborious, technically sophisticated, and/or time-consuming, making them futile in the context of in-field embryo evaluation. However accurate they may be, using complex methods, such as RNA sequencing, SNP chips, mass spectrometry, and multiphoton microscopy, at thousands of embryo production/collection facilities is impractical. Therefore, future research is warranted to innovate field-friendly, simple benchtop tests using findings already available, particularly from omics-based research methodologies. Time-lapse monitoring and artificial-intelligence-based automated image analysis also have the potential for accurate embryo evaluation; however, further research is warranted to innovate economically feasible options for in-field applications.

Evaluation of a small volume oil-free in vitro production system for bovine embryos

Background:

Embryos are usually produced in culture systems with an oil overlay, which conveys protection against the evaporation of water and microbial contamination. The oil can also release toxic substances and absorb essential components, such as hormones, which adversely affect the quality of the oocytes and the development of embryos in vitro.

Objective:

The aim of this study was to validate an oil‐free bovine in vitro production (IVP) system.

Method:

Cumulus–oocyte complexes collected from abattoir‐derived ovaries were matured, fertilized and cultured employing a standard system. The quantity of medium in both groups (with and without an oil overlay) and throughout all stages of IVP was maintained at a volume of 100 μl. The oil group was covered with paraffin oil. The maturation stage of oocytes was assessed using fluorescence staining after 24 hr and developmental stages of embryos were evaluated on day 8. The expanded day 8 blastocysts were assessed by live–dead staining.

Results:

Oocytes matured in the absence of an oil overlay had significantly higher maturation rates when compared against matured oocytes in medium with an oil overlay. Steroid concentration is higher in medium after maturation without oil cover. The developmental rate was significantly higher after culture without oil overlay. The total cell number and the live–dead ratio was not significantly different. The osmolality did not differ between both groups during maturation and slightly decreased during culture without oil.

Conclusion:

Based on the current study, bovine oil‐free IVP systems can be suggested as an alternative to oil‐covered medium.

Oocyte Selection for In Vitro Embryo Production in Bovine Species: Noninvasive Approaches for New Challenges of Oocyte Competence

Simple Summary

The efficiency of producing embryos using in vitro technologies in cattle species remains lower when compared to mice, indicating that the proportion of female gametes that fail to develop after in vitro manipulation is considerably large. Considering that the intrinsic quality of the oocyte is one of the main factors affecting embryo production, the precise identification of noninvasive markers that predict oocyte competence is of major interest. The aim of this review was to explore the current literature on different noninvasive markers associated with oocyte quality in the bovine model. Apart from some controversial findings, the presence of cycle-related structures in ovaries, a follicle size between 6 and 10 mm, a large slightly expanded investment without dark areas, large oocyte diameter (>120 microns), dark cytoplasm, and the presence of a round and smooth first polar body have been associated with better embryonic development. In addition, the combination of oocyte and zygote selection, spindle imaging, and the anti-Stokes Raman scattering microscopy together with studies decoding molecular cues in oocyte maturation have the potential to further optimize the identification of oocytes with better developmental competence for in vitro technologies in livestock species.

Abstract

The efficiency of producing embryos using in vitro technologies in livestock species rarely exceeds the 30–40% threshold, indicating that the proportion of oocytes that fail to develop after in vitro fertilization and culture is considerably large. Considering that the intrinsic quality of the oocyte is one of the main factors affecting blastocyst yield, the precise identification of noninvasive cellular or molecular markers that predict oocyte competence is of major interest to research and practical applications. The aim of this review was to explore the current literature on different noninvasive markers associated with oocyte quality in the bovine model. Apart from some controversial findings, the presence of cycle-related structures in ovaries, a follicle size between 6 and 10 mm, large number of surrounding cumulus cells, slightly expanded investment without dark areas, large oocyte diameter (>120 microns), dark cytoplasm, and the presence of a round and smooth first polar body have been associated with better competence. In addition, the combination of oocyte and zygote selection via brilliant cresyl blue (BCB) test, spindle imaging, and the anti-Stokes Raman scattering microscopy together with studies decoding molecular cues in oocyte maturation have the potential to further optimize the identification of oocytes with better developmental competence for in-vitro-derived technologies in livestock species.

How can we improve embryo production and pregnancy outcomes of Holstein embryos produced in vitro? (12 years of practical results at a California dairy farm)

Genomic evaluations have revolutionized dairy cattle breeding, and the demand for embryos produced from very young heifers with high genetic merit has increased over time. The combination of low oocyte recovery, young age of donors, and milk production status can make the in vitro embryo production (IVP) of Holstein cattle incredibly challenging. Several factors need to be coordinated to obtain a live calf from an IVP embryo, but the quality of the oocyte at the start of the process is one of the key factors. Aspects related to oocyte quality, laboratory quality control, embryo quality and recipient selection are addressed here, based on the measures that the RuAnn Genetics Laboratory (Riverdale, California, USA) adopted in the last 12 years, with the goal of improving production of live, healthy calves from Holstein embryos. Follicular wave synchronization and stimulation with follicular stimulating hormone (FSH) is necessary to improve oocyte quality and consequently embryo production. Laboratory quality control and the use of high-quality supplies are essential to reduce variability in production and facilitate identification of other factors that might interfere with embryo production. High pregnancy rates can be achieved with good quality embryos selected at optimal time and stage of development, transferred by an experienced embryo transfer (ET) technician, to well managed recipients 7 or 8 days after estrus. Attention to detail at every step of the process is crucial to success.

Review: Environmental impact on early embryonic development in the bovine species

Assisted reproduction techniques (ARTs) provide access to early stage embryos whose analysis and assessment deliver valuable information. The handling of embryos, including the in vitro production of bovine embryos, is a rapidly evolving area which nonetheless exposes the embryos to unnatural conditions for a period of time. The Fallopian tube provides innumerable quantitative and qualitative factors, all of which guarantee the successful development of the embryo. It is well known that the Fallopian tube can be bypassed, using embryo transfer, resulting in successful implantation in the target recipient animal and the birth of calves. However, the question arises as to whether such circumvention has a negative impact on the embryo during this sensitive development period. First crosstalk between the embryo and its environment confirms mutual recognition activities and indicate bilateral effects. Nowadays, in vitro production of bovine embryos is a well-established technology. However, it is still evident that in vitro generated embryos are not qualitatively comparable to embryos obtained ex vivo. To counteract these differences, comparative studies between in vitro and ex vivo embryos are advantageous, as embryos grown in their physiological environment can provide a blueprint or gold standard against which to compare embryos produced in vitro. Attempts to harness the bovine oviduct were sometimes very invasive and did not result in wide acceptance and routine use. Long-term development and refinement of transvaginal endoscopy for accessing the bovine oviduct has meanwhile been routinely applied for research as well as in practice. Comparative studies combining in vitro development with development in the cattle oviduct revealed that the environmental conditions to which the embryo is exposed before activation of the embryonic genome can have detrimental and lasting effects on its further development. These effects are manifested as deviations in gene expression profiles and methylation signatures as well as frequency of whole chromosomal or segmental aberrations. Furthermore, it was shown that hormonal superstimulation (multiple ovulation and embryo transfer), varying progesterone concentrations as well as metabolic disorders caused by high milk production, markedly affected embryo development in the postpartum period. Assisted reproductive techniques that allow the production and handling of extra numbers of generated embryos promise to have a very high impact on scientific and practical application. Any influence on the early embryonic life, both in animals and in vitro, is accompanied by a sensitive change in embryonic activity and should be assessed in vivo on the basis of physiological conditions before being used for ART.

BOARD INVITED REVIEW: Post-transfer consequences of in vitro-produced embryos in cattle

In vitro embryo production (IVP) in cattle has gained worldwide interest in recent years, but the efficiency of using IVP embryos for calf production is far from optimal. This review will examine the pregnancy retention rates of IVP embryos and explore causes for pregnancy failures. Based on work completed over the past 25 yr, only 27% of cattle receiving IVP embryos will produce a live calf. Approximately 60% of these pregnancies fail during the first 6 wk of gestation. When compared with embryos generated by superovulation, pregnancy rates are 10% to 40% lower for cattle carrying IVP embryos, exemplifying that IVP embryos are consistently less competent than in vivo-generated embryos. Several abnormalities have been observed in the morphology of IVP conceptuses. After transfer, IVP embryos are less likely to undergo conceptus elongation, have reduced embryonic disk diameter, and have compromised yolk sac development. Marginal binucleate cell development, cotyledon development, and placental vascularization have also been documented, and these abnormalities are associated with altered fetal growth trajectories. Additionally, in vitro culture conditions increase the risk of large offspring syndrome. Further work is needed to decipher how the embryo culture environment alters post-transfer embryo development and survival. The risk of these neonatal disorders has been reduced by the use of serum-free synthetic oviductal fluid media formations and culture in low oxygen tension. However, alterations are still evident in IVP oocyte and embryo transcript abundances, timing of embryonic cleavage events and blastulation, incidence of aneuploidy, and embryonic methylation status. The inclusion of oviductal and uterine-derived embryokines in culture media is being examined as one way to improve the competency of IVP embryos. To conclude, the evidence presented herein clearly shows that bovine IVP systems still must be refined to make it an economical technology in cattle production systems. However, the current shortcomings do not negate its current value for certain embryo production needs and for investigating early embryonic development in cattle.

On the Way to in vitro Platelet Production

The severely decreased platelet counts (10–30. 10³ platelets/μL) frequently observed in patients undergoing chemotherapy, radiation treatment, or organ transplantation are associated with life-threatening increased bleeding risks. To circumvent these risks, platelet transfusion remains the treatment of choice, despite some limitations which include a limited shelf-life, storage-related deterioration, the development of alloantibodies in recipients and the transmission of infectious diseases. A sustained demand has evolved in recent years for controlled blood products, free of infectious, inflammatory, and immune risks. As a consequence, the challenge for blood centers in the near future will be to ensure an adequate supply of blood platelets, which calls for a reassessment of our transfusion models. To meet this challenge, many laboratories are now turning their research efforts toward the in vitro and customized production of blood platelets. In recent years, there has been a major enthusiasm for the cultured platelet production, as illustrated by the number of reviews that have appeared in recent years. The focus of the present review is to critically asses the arguments put forward in support of the culture of platelets for transfusion purposes. In light of this, we will recapitulate the main advances in this quickly evolving field, while noting the technical limitations to overcome to make cultured platelet a transfusional alternative.

The Cytochrome P450 Enzyme Responsible for the Production of (Z)-Norendoxifen in vitro

Norendoxifen, an active metabolite of tamoxifen, is a potent aromatase inhibitor. Little information is available regarding production of norendoxifen in vitro. Here, we conducted a series of kinetic and inhibition studies in human liver microsomes (HLMs) and expressed P450s to study the metabolic disposition of norendoxifen. To validate that norendoxifen was the metabolite of endoxifen, metabolites in HLMs incubates of endoxifen were measured using a HPLC/MS/MS method. To further probe the specific isoforms involved in the metabolic route, endoxifen was incubated with recombinant P450s (CYP 1A2, 2A6, 2B6, 2C8, 2C9, 2C19, 2D6, 3A4, 3A5 and CYP4A11). Formation rates of norendoxifen were evaluated in the absence and presence of P450 isoform specific inhibitors using HLMs. The peak of norendoxifen was found in the incubations consisting of endoxifen, HLMs, and cofactors. The retention times of norendoxifen, endoxifen, and the internal standard (diphenhydramine) were 7.81, 7.97, and 5.86 min, respectively. The K_m (app) and V_max (app) values of norendoxifen formation from endoxifen in HLM was 47.8 μm and 35.39 pmol min^-1 mg^-1 . The apparent hepatic intrinsic clearances of norendoxifen formation were 0.74 μl mg^-1 min. CYP3A5 and CYP2D6 were the major enzymes capable of norendoxifen formation from endoxifen with the rates of 0.26 and 0.86 pmol pmol^-1 P450 × min. CYP1A2, 3A2, 2C9, and 2C19 also contributed to norendoxifen formation, but the contributions were at least 6-fold lower. One micromolar ketoconazole (CYP3A inhibitor) showed an inhibitory effect on the rates of norendoxifen formation by 45%, but 1 μm quinidine (CYP2D6 inhibitor) does not show any inhibitory effect. Norendoxifen, metabolism from endoxifen by multiple P450s that including CYP3A5.

Economic and genetic performance of various combinations of in vitro-produced embryo transfers and artificial insemination in a dairy herd

The objective of this study was to find the optimal proportions of pregnancies from an in vitro-produced embryo transfer (IVP-ET) system and artificial insemination (AI) so that profitability is maximized over a range of prices for embryos and surplus dairy heifer calves. An existing stochastic, dynamic dairy model with genetic merits of 12 traits was adapted for scenarios where 0 to 100% of the eligible females in the herd were impregnated, in increments of 10%, using IVP-ET (ET0 to ET100, 11 scenarios). Oocytes were collected from the top donors selected for the trait lifetime net merit (NM$) and fertilized with sexed semen to produce IVP embryos. Due to their greater conception rates, first ranked were eligible heifer recipients based on lowest number of unsuccessful inseminations or embryo transfers, and then on age. Next, eligible cow recipients were ranked based on the greatest average estimated breeding values (EBV) of the traits cow conception rate and daughter pregnancy rate. Animals that were not recipients of IVP embryos received conventional semen through AI, except that the top 50% of heifers ranked for EBV of NM$ were inseminated with sexed semen for the first 2 AI. The economically optimal proportions of IVP-ET were determined using sensitivity analysis performed for 24 price sets involving 6 different selling prices of surplus dairy heifer calves at approximately 105 d of age and 4 different prices of IVP embryos. The model was run for 15 yr after the start of the IVP-ET program for each scenario. The mean ± standard error of true breeding values of NM$ of all cows in the herd in yr 15 was greater by $603 ± 2 per cow per year for ET100 when compared with ET0. The optimal proportion of IVP-ET ranged from ET100 (for surplus dairy heifer calves sold for ≥$300 along with an additional premium based on their EBV of NM$ and a ≤$100 embryo price) to as low as ET0 (surplus dairy heifer calves sold at $300 with a $200 embryo price). For the default assumptions, the profit/cow in yr 15 was greater by $337, $215, $116, and $69 compared with ET0 when embryo prices were $50, $100, $150, and $200. The optimal use of IVP-ET was 100, 100, 62, and 36% of all breedings for these embryo prices, respectively. At the input price of $165 for an IVP embryo, the difference in the net present value of yr 15 profit between ET40 (optimal scenario) and ET0 was $33 per cow. In conclusion, some use of IVP-ET was profitable for a wide range of IVP-ET prices and values of surplus dairy heifer calves.

In vitro production of Spodoptera exigua multiple nucleopolyhedrovirus with enhanced insecticidal activity using a genotypically defined virus inoculum

Defective virus accumulations during baculovirus passages in insect cell culture are impediments to large scale baculovirus production. A genotypically defined virus inoculum comprises of stable genotypes was proposed for production of a Thailand isolated SeMNPV in Se-UCR1 insect cells. Targeted genotypes were from wild-type SeMNPV containing naturally mixed genotypes. Plaque assays, PCR screening and XbaI restriction analysis were employed for genotype purification, genotype selection and genome analysis, respectively. A selective marker was pif2 encoded per os infection factor which predominantly deleted, along with the adjacent pif1, in defective viruses. A purified, genetically stable pif2+ (and pif1+) genotype, namely SeThpif2+, was the first tryout. SeThpif2+ occlusion bodies (OBs) possessed insecticidal activity but at lower level than the wild-type. When the SeThpif2+ was co-infected with another purified, genetically stable pif1- (and pif2-) genotype, SeThpif2-, at ratio of 3:1, respectively, mixed genotypes OBs had 2.8 times greater insecticidal activity than the SeThpif2+ alone. Dilution of deleterious PIF1 of SeThpif2+ by the pif1 deletion genotypes, SeThpif2-, was the key for this enhanced activity. A promising approach was described for SeMNPV production in vitro using the virus inoculum whose genotypes compositions were designed to mimic virus interactions in the wild-type, to generate per oral infective baculovirus.

Variation in ruminal in situ degradation of crude protein and starch from maize grains compared to in vitro gas production kinetics and physical and chemical characteristics

The objectives of this study were (1) to evaluate in situ ruminal dry matter (DM), crude protein (CP) and starch degradation characteristics and in vitro gas production (GP) kinetics using a set of 20 different maize grain genotypes and (2) to predict the effective degradation (ED) of CP and starch from chemical and physical characteristics alone or in combination with in vitro GP measurements. Maize grains were characterised by different chemical and physical characteristics. Ruminal in situ degradation was measured in three lactating Jersey cows. Ground grains (sieve size: 2 mm) were incubated in bags for 1, 2, 4, 8, 16, 24, 48 and 72 h. Bag residues were analysed for CP and starch content. Degradation kinetics was determined and the ED of DM, CP and starch calculated using a ruminal passage rate of 5%/h and 8%/h. The GP of the grains (sieve size: 1 mm) was recorded after 2, 4, 6, 8, 12, 24, 48 and 72 h incubation in buffered rumen fluid and fitted to an exponential equation to determine GP kinetics. Correlations and stepwise multiple linear regressions were evaluated for the prediction of ED calculated for a passage rate of 5%/h (ED5) for CP (EDCP5) and starch (EDST5). The in situ parameters and ED5 varied widely between genotypes with average values (±SD) of 64% ± 4.2, 62% ± 4.1 and 65% ± 5.2 for ED5 of DM, EDCP5 and EDST5 and were on average 10 percentage points lower for a passage rate of 8%/h. Degradation rates varied between 4.8%/h and 7.4%/h, 4.1%/h and 6.5%/h and 5.3%/h and 8.9%/h for DM, CP and starch, respectively. These rates were in the same range as GP rates (6.0-8.3%/h). The EDCP5 and EDST5 were related to CP concentration and could be evaluated in detail using CP fractions and specific amino acids. In vitro GP measurements and GP rates correlated well with EDCP5 and EDST5 and predicted EDCP5 and EDST5 in combination with the chemical characteristics of the samples. Equations can be used to obtain quick and cost effective information on ruminal degradation of CP and starch from maize grains.

The Effects of Nutrient Concentration, Addition of Thickeners, and Agitation Speed on Liquid Fermentation of Steinernema feltiae

Entomopathogenic nematode production in liquid fermentation still requires improvements to maximize efficiency, yield, and nematode quality. Therefore, this study was aimed at developing a more suitable liquid medium for mass production of Steinernema feltiae, by assessing the effects of nutrient concentration, thickeners (primarily agar), and agitation speed on infective juvenile (IJ) yield. Base medium (BM) contained yeast extract (2.3%), egg yolk (1.25%), NaCl (0.5%), and corn oil (4%). All media were inoculated with Xenorhabdus bovienii, and 2 d later, with 2-d-old S. feltiae juveniles. For the nutrient concentration experiment, we evaluated the base medium versus a modified base medium containing all the components, but with 3× concentrations of yeast extract (6.9%), egg yolk (3.75%), and corn oil (12%). The nematodes and bacteria were cultured in 150-ml Erlenmeyer flasks containing 50 ml of liquid medium at (25°C) and 180 rpm on a rotary shaker incubator. To assess the effect of thickeners, IJs were inoculated in BM with agar (0.2%), carrageen (0.2%), and carboxymethyl cellulose (0.2% and 0.5%). The addition of 3× more nutrients relative to the BM resulted in a significantly lower yield of nematodes. For agar and agitation speed experiments, five levels of agar in the BM (0%, 0.2%, 0.4%, 0.6%, and 0.8% agar) and two agitation speeds (180 and 280 rpm) were evaluated for production. Increasing agitation speed from 180 to 280 rpm and higher levels of agar in the medium (> 0.2%) significantly increased the yield of bacteria. At the lower agitation speed, media amended with 0.4% and 0.6% agar produced higher nematode yields compared to media without agar. Media with 0.2% and 0.8% agar resulted in intermediate levels of nematode production. At the higher agitation speed, media supplemented with 0.8% agar resulted in the lowest yield of nematodes when compared to the other media tested. Results indicated that increasing nutrient concentration levels was detrimental to nematode production. Also, media containing agar (0.4% and 0.6%) increased nematode yields when cultures were grown at low agitation speed. When IJs were used as the inoculum, 0.2% agar also enhanced recovery and nematode yield at the higher agitation speed.

[Importance of reproductive biotechnology in cattle in Europe]

Reproductive biotechnology has manifold applications and includes a great innovation potential in livestock. Due to the global changes the new findings and techniques can aid to meet the future challenges. The use of biotechnology in animal production can guarantee enough high quality food for the whole population. Genetic resources of animals can be preserved via sperm and embryo banking. Early diagnosis of hereditary defects, generation of offspring with predetermined sex and the avoidance of animal transports for breeding employing shipment of frozen embryos will improve animal welfare. A special application is the use of animal models for human assisted reproductive technologies. Therefore, not only in Germany research related to the methodologies in reproductive biotechnology and their improvement need to be supported.

Heat shock induces interferon-TAU gene expression by in vitro-produced bovine blastocysts

PROBLEM

The type I interferon (IFN), IFN-tau (τ), is the primary embryonic signal for pregnancy maintenance in ruminants. This study determined the effects of heat shock upon IFN-τ (IFNT) gene expression by bovine blastocysts in vitro.

METHOD OF STUDY

In vitro-produced blastocyst-stage embryos were exposed to 42°C for 4 hr, and mRNA for heat-shock protein 70 (HSP70) and IFNT quantified.

RESULTS

Heat shock increased both HSP70 and IFNT expression. There was a significant correlation between HSP70 and IFNT transcript levels irrespective of whether a blastocyst had been exposed to heat shock or not.

CONCLUSION

The increase in IFNT as a result of heat shock suggests that a proportion of the variation in IFNT expression observed in blastocyst-stage embryos is a response to stress.

High therapeutic potential of Spilanthes acmella: A review

Spilanthes acmella, a well known antitoothache plant with high medicinal usages, has been recognized as an important medicinal plant and has an increasingly high demand worldwide. From its traditional uses in health care and food, extensive phytochemical studies have been reported. This review provides an overview and general description of the plant species, bioactive metabolites and important pharmacological activities including the preparation, purification and in vitro large-scale production. Structure-activity relationships of the bioactive compounds have been discussed. Considering data from the literature, it could be demonstrated that S. acmella possesses diverse bioactive properties and immense utilization in medicine, health care, cosmetics and as health supplements. As a health food, it is enriched with high therapeutic value with high potential for further development.