Using Dual-Orthogonal Fluoroscopy and CT to Assess the Relationship Between Knee Morphology and Patellar Kinematics in Patients With Patellofemoral Pain

INTRODUCTION

Patellofemoral pain (PFP) is one of the most common knee overuse injuries, with studies suggesting PFP as a precursor for early knee osteoarthritis. The etiology of PFP is multi-factorial; however, patellar mal-tracking has been regarded as a primary mechanism. Details of this multi-factorial mechanism have been unclear because of the limitations in evaluating in-vivo, three-dimensional (3D) patellofemoral joint movement during dynamic activities accurately. Alternatively, studies have demonstrated the high accuracy and repeatability of dual fluoroscopy and CT/MRI for measuring knee joint motion.

OBJECTIVE

This study uses dual fluoroscopy and CT to investigate the associations between joint morphology and patellar kinematics in healthy controls and subjects with PFP.

METHODS

Eight PFP females (29.7±10.6 years) and 10 healthy females (25.0±7.7 years) were recruited and screened by a sports medicine physician. CT imaging was performed on participants in a supine with the knee extended, and ankle and hip in neutral alignment. Dual-orthogonal fluoroscopy measured patellar movement while participants performed a lunge task. A calibration algorithm was used to register the 3D CT model to 2D fluoroscopy image to calculate the relative position and angles of the patella based on the clinical definition of patellar motion. Measures of patellar and trochlear morphology were generated and correlated to kinematic data.

RESULTS AND CONCLUSION

There was a significant difference in the patellar-to-trochlear width ratio; however, no other significant differences in CT morphology measurements were present between groups. For PFP patients in the weight-bearing extended position, there was a moderate positive correlation between the patellar-to-trochlear width ratio and medial-lateral patellar shift (τ = 0.643, p = 0.026). Healthy controls in this position demonstrated a moderate positive correlation between the lateral-trochlear inclination angle and medial-lateral patellar shift (τ = 0.600, p = 0.016) and moderate negative correlation between medial trochlear inclination angle and medial-lateral patellar shift (τ = -0.511, p = 0.040). The findings suggest that, for this cohort, there is correlation between morphology and patellar kinematics. Passive and active stabilizers likely have a role in mal-tracking.

Three-dimensional magnetic resonance imaging analysis shows sex-specific patterns in changes in anterior cruciate ligament cross-sectional area along its length

Smaller anterior cruciate ligament (ACL) size in females has been hypothesized to be a key contributor to a higher incidence of ACL tears in that population, as a lower cross-sectional area (CSA) directly corresponds to a larger stress on the ligament for a given load. Prior studies have used a mid-length CSA measurement to quantify ACL size. In this study, we used magnetic resonance imaging to quantify the CSA along the entire length of the intact ACL. We hypothesized that changes in the ACL CSA along its length would have different patterns in males and females. We also hypothesized that changes in ACL CSA along its length would be associated with body size or knee size with different associations in females and males. MR images of contralateral ACL-intact knees of 108 patients (62 females, 13-35 years) undergoing ACL surgery were used to measure the CSA along the ACL length, using a custom program. For both females and males, the largest CSA was located at 37%-39% of ACL length from the tibial insertion. Compared to females, males had a significantly larger CSA only within the distal 41% of the ACL (p < 0.001). ACL CSA was associated with patient height and weight in males (r > 0.3; p < 0.05), whereas it was associated with intercondylar notch width in females (r > 0.3; p < 0.05). These findings highlight the importance of standardizing the location of measurement of ACL CSA.

Physiological Femoral Condylar Morphology in Adult Knees-A MRI Study of 517 Patients

BACKGROUND

In the age of individualised arthroplasty, the question arises whether currently available standard implants adequately consider femoral condylar morphology (FCM). Therefore, physiological reference values of FCM are needed. The aim was to establish physiological reference values for anterior (ACO) and posterior condylar offset (PCO) as well as for the length of the medial (LMC) and lateral femoral condyles (LLC).

METHODS

The knee joints of 517 patients (mean age: 52.3 years (±16.8)) were analysed retrospectively using MRI images. Medial (med) and lateral (lat) ACO and PCO, as well as LMC and LLC, were measured. All FCM parameters were examined for association with age, gender, side and osteoarthritis.

RESULTS

Mean ACOmed was 2.8 mm (±2.5), mean ACOlat was 6.7 mm (±2.3), mean PCOmed was 25.7 mm (±4.6), mean PCOlat was 23.6 mm (±3.0), mean LMC was 63.7 mm (±5.0) and mean LLC was 64.4 mm (±5.0). Except for PCOmed, the mean values of all other FCM parameters were significantly higher in male knees compared to female knees. ACOmed and PCOmed showed significant side-specific differences. There were no significant differences in relation to age and osteoarthritis.

CONCLUSION

The study showed significant differences in FCM side- and gender-specifically in adult knees. These aspects should be considered in the discussion of individual and gender-specific knee joint replacement.

Comparison of the morphology of the anterior cruciate ligament and related bony structures between pigs and humans

INTRODUCTION

Pigs are widely used for clinical research on the anterior cruciate ligament (ACL) because of the similarity of the knee structure to the human knee. But evidence to support the suitability of using porcine samples to guide clinical practices is limited. This study aims to explore the qualitative and quantitative morphological features of the porcine knee and ACL, and to compare these with data on humans reported in literature.

METHODS

Nineteen porcine knees were used for this study. The bone structures were measured on coronal X-ray images. The length of the ACL was measured using a caliper. The ACL bone insertion sites were marked and measured on a digital photograph. The lengths of the long and short axis of the ACL isthmus were measured on the X-ray microscopy reconstructed images. The outcomes were compared with previously reported data on humans using an abstract independent-samples T test.

RESULTS

Qualitative observation indicated a similar location, orientation and general morphology of the porcine ACL to human ACLs. The major difference was the location of the ACL tibial insertion with respect to the anterior horn of the lateral meniscus (AHLM). The porcine ACL was split into AM and PL bundles by the AHLM, while the AHLM was adjacent to the anterolateral border of the ACL tibial insertion in human knees. The quantitative comparison showed no significant difference between the human and porcine ACL in terms of the length of the ACL, the width of the femoral condyle and tibial plateau, and the tibial interspinal width. However, the CSA, the lengths of the long and short axis of the ACL isthmus, and the femoral and tibial insertion areas of the porcine ACL were all significantly larger than the reported features in human knees.

CONCLUSION

The location, orientation and basic morphology of the porcine ACL and knee are similar to humans. However, the two-bundle structure is more distinct in a porcine ACL, and the dimensions of the porcine ACL are generally larger. This study may provide useful information to researchers when assessing the feasibility and limitations of using porcine samples for research on the human ACL and knee.

Morphological Analysis of the Tibial Slope in 720 Adult Knee Joints

Background: The tibial slope (TS) defines the posterior inclination of the tibial plateau (TP). The “individual physiological” TS plays a crucial role in knee-joint stability and should be taken into account in knee-joint surgery. The aim of this study was to analyse the specific morphology of the TS for the medial (med) and lateral (lat) TP in relation to patient characteristics and the measurement method. Methods: In this retrospective study, MRI images of knee joints from 720 patients (mean age: 49.9 years [±17.14]) were analysed. The TS was assessed using two established methods according to Hudek (TSH) and Karimi (TSK) for the med and lat TP and gender/side specificity was analysed. Results: TSH for the med and lat TP showed significantly (p < 0.001) different values compared to TSK (TSKmed: 2.6° (±3.7), TSHmed: 4.8° (±3.5); TSKlat: 3.0° (±4.0), TSHlat: 5.2° (±3.9)). The angles of the lat TP were significantly higher than those of the med TP (TSK: p < 0.001; TSH: p = 0.002). Females showed a higher med and lat TS compared to males (p < 0.001). Conclusions: The measurement method has an influence on the values of the TS in knee-joint MRIs. The TS is significantly different for the med and lat TP regardless of the measurement method. There are gender-specific differences for the TS.

Association Between the Morphology of Proximal Tibiofibular Joint and the Presence of Knee OA

Objective: The aim of this study was to evaluate the association between the morphology of the proximal tibiofibular joint (PTFJ) and the presence of knee osteoarthritis (OA).

Methods: Twenty-eight OA subjects and 30 healthy subjects were enrolled in this study. A 3D model of the lower limb of each subject was constructed from CT scans and used to measure the characteristics of the PTFJ, including the shape of the articular facets, articular surface area, joint inclination, relative articular height, and joint declination. The association between the characteristics of the PTFJ and presence of knee OA was assessed using binomial logistic regression analysis.

Results: There was a significant difference between the OA and healthy groups in terms of the inclination (p = 0.028) and declination (p = 0.020) of the PTFJ and relative articular height (p = 0.011). A greater inclination angle (OR: 1.463, 95% CI: 1.124–1.582, p = 0.021), greater declination angle (OR: 1.832, 95% CI: 1.691–2.187, p = 0.009), and lower relative articular height (OR: 0.951, 95% CI: 0.826–0.992, p = 0.008) were found to be associated with an increased likelihood of knee OA being present.

Conclusion: The results of this study suggest that abnormal PTFJ morphology is associated with the presence of knee OA.

A Comparison Between Chinese and Caucasian 3-Dimensional Bony Morphometry in Presimulated and Postsimulated Osteotomy for Total Knee Arthroplasty

BACKGROUND

The bone morphologies of intact knees were measured and compared between Chinese and Caucasian populations. However, to assess if distinct designs of implants are necessary for the Chinese population owing to different morphologies and sizes, the knee measurements after osteotomy performed in total knee arthroplasty were evaluated.

METHODS

Thirty-seven Caucasian and 50 Chinese patients' knees were examined using computed tomography scans. Mimics were applied to reconstruct 3-dimensional bone models. Dimensions of the 3-dimensional knee models and simulated bone resections during total knee arthroplasty were measured using Geomagic Studio and Pro/ENGINEER. The morphologic measurements of the native and resected femur and tibia included the anteroposterior (AP) depth, mediolateral (ML) width, notch width, knee physical valgus angle, tibial slope angle, and the ML-to-AP ratio of the femur, tibia, and resected femur. Statistical analysis was performed using the independent samples t test and the Pearson correlation coefficient in SPSS for Windows. Values of P < .05 were considered significant.

RESULTS

No measurements were significantly different between the Chinese and Caucasian knees. However, the Chinese female showed significant differences compared with the Chinese male on distal femoral measurements both presimulated and postsimulated osteotomy such as a smaller mean ML-to-AP ratio in presimulated (1.3 ± 0.1) and postsimulated (1.3 ± 0.1) osteotomy.

CONCLUSION

The necessity of designing a full set of total knee components specifically for the Chinese population is still undetermined. However, we suggest designing femoral components specific for the Chinese females because of different postosteotomy distal femoral ML-to-AP ratio between the Chinese males and the Chinese females.

Tibia valga morphology in osteoarthritic knees: importance of preoperative full limb radiographs in total knee arthroplasty

Osteoarthritis of the knee is associated with deformities of the lower limb. Tibia valga is a contributing factor to lower limb alignment in valgus knees. We evaluated 97 valgus knees and 100 varus knees. Long-leg films were taken in weight bearing with both knees in full extension. For valgus knees, 52 knees (53%) had a tibia valga deformity. Average tibia valgus deformation was 5.0°. For varus knees, there was only 1 case of tibia valga (1%), with a deformation of 2.5°. The aim of this study was to assess the prevalence of primary tibia valga in valgus and varus knees and understand how it affects our approach to total knee arthroplasty (TKA). We recommend having full-leg length films when planning for TKA in valgus knees.