Ferrous Illusion: A Unique Case of Welding Fume Particles Appearing as Metallic Artifacts in MRI

A rare cause of metallic artifacts over the scalp on magnetic resonance imaging (MRI) is welding fume particles that contain paramagnetic iron oxide particles. These introduce distortion of the magnetic field homogeneity and result in susceptibility artifacts. They may erroneously be reported as a pathology such as calcified lesions; therefore, awareness among radiologists is required. We report a case of a 52-year-old male, an industrial inspector by profession, who presented to the neurology clinic with headaches for which an MRI of the brain without contrast was advised. There was no brain parenchymal signal abnormality; however, numerous small rounded altered signal foci were identified along the scalp, especially in the vertex region, which returned central hypointense and marginal hyperintense signal on all sequences. The imaging signals were suspicious for calcified scalp lesions, and the patient was recalled for clinical examination, which was unremarkable for cutaneous or subcutaneous abnormality on the scalp or elsewhere over the body. A detailed history was taken retrospectively, revealing that the patient had walked through a room where welding was being done before presenting for an MRI exam, without taking a shower. The various altered signal foci over the scalp on MRI based on their shape were hence identified as welding fume particles. These were fine enough not to be visible by the naked eye but determined by the MRI machine because of their magnetic susceptibility artifact. We aim to increase radiologists' awareness of such artifacts that may be seen in patients with occupational exposure to these particles to avoid misdiagnosis of other pathologies.

Influence of Windowing and Evaluation of Metal Artifact Reduction Algorithm on Five Different Restorative Materials by Using Different Cone Beam Computed Tomography (CBCT) Scanners: A CBCT Study

OBJECTIVES

To assess the influence of windowing, and to evaluate, and compare the effect of the metal artifact reduction (MAR) and non-metal artifact reduction (non-MAR) algorithms on different high-density restorative dental materials using different cone beam computed tomography (CBCT) devices.

MATERIAL AND METHOD

Height and diameter of all cylindrical shape metals including amalgam, cobalt-chromium, composite, gutta-percha, and titanium were measured using a digital caliper device. Polymethylmethacrylate block and arch phantom with a cylindrical-shaped perforation containing five different metals were submitted to tomographic acquisition with six different cone beam computed tomographic devices in small fields of view with their MAR enabled and disabled. Windowing was done using ITK-SNAP software (3.8.2) which was used as a contrast medial tool for window level and window width. The data was analyzed for probability distribution using the Kolmogorov-Smirnov test, where a p-value of <0.05 indicated that the data were not normally distributed. The comparison of length and width was done using the Wilcoxon sign rank test. Comparison of categorical variables was done using the Chi-square test where a p-value of <0.05 was considered statistically significant.

RESULTS

Length and width of all these metals measured using MAR and non-MAR CBCT were found to be statistically non-significant (p-value of >0.05). MAR algorithm significantly reduces metals artifact produced by high-density restorative materials (p-value of <0.05).

CONCLUSION

Amalgam and cobalt-chromium produced more artifacts while composite and gutta-percha did not produce enough artifacts to be reduced by the MAR algorithm. Large window width and high window level would be beneficial to reduce the metal artifact.

Fabrication and evaluation of bilateral Helmholtz radiofrequency coil for thermo-stable breast image with reduced artifacts

PURPOSE

The positron emission tomography (PET)-magnetic resonance (MR) system is a newly emerging technique that yields hybrid images with high-resolution anatomical and metabolic information. With PET-MR imaging, a definitive diagnosis of breast abnormalities will be possible with high spatial accuracy and images will be acquired for the optimal fusion of anatomic locations. Therefore, we propose a PET-compatible two-channel breast MR coil with minimal disturbance to image acquisition which can be used for simultaneous PET-MR imaging in patients with breast cancer.

MATERIALS AND METHODS

For coil design and construction, the conductor loops of the Helmholtz coil were tuned, matched, and subdivided with nonmagnetic components. Element values were optimized with an electromagnetic field simulation. Images were acquired on a GE 600 PET-computed tomography (CT) and GE 3.0 T MR system. For this study, we used the T1-weighted image (volunteer; repetition time (TR), 694 ms; echo time (TE), 9.6 ms) and T2-weighted image (phantom; TR, 8742 ms; TE, 104 ms) with the fast spin-echo sequence.

RESULTS

The results of measuring image factors with the proposed radiofrequency (RF) coil and standard conventional RF coil were as follows: signal-to-noise ratio (breast; 207.7 vs. 175.2), percent image uniformity (phantom; 89.22%-91.27% vs. 94.63%-94.77%), and Hounsfield units (phantom; -4.51 vs. 2.38).

CONCLUSIONS

Our study focused on the feasibility of proposed two-channel Helmholtz loops (by minimizing metallic components and soldering) for PET-MR imaging and found the comparable image quality to the standard conventional coil. We believe our work will help significantly to improve image quality with the development of a less metallic breast MR coil.

The Utility of Dual Energy Computed Tomography in Musculoskeletal Imaging

The objective of this article is to review the mechanisms, advantages and disadvantages of dual energy computed tomography (DECT) over conventional tomography (CT) in musculoskeletal imaging as DECT provides additional information about tissue composition and artifact reduction. This provides clinical utility in detection of urate crystals, bone marrow edema, reduction of beam hardening metallic artifact, and ligament and tendon analysis.

Pacemaker-induced Metallic Artifacts in Coronary Computed Tomography Angiography: Clinical Feasibility of Single Energy Metal Artifact Reduction Technique

BACKGROUND

Coronary computed tomography angiography (CCTA) in patients with pacemaker suffers from metallic lead-induced artifacts, which often interfere with accurate assessment of coronary luminal stenosis. The purpose of this study was to assess a frequency of the lead-induced artifacts and artifact-suppression effect by the single energy metal artifact reduction (SEMAR) technique.

METHODS

Forty-one patients with a dual-chamber pacemaker were evaluated using a 320 multi-detector row CT (MDCT). Among them, 22 patients with motion-free full data reconstruction images were the final candidates. Images with and without the SMEAR technique were subjectively compared, and the degree of metallic artifacts was compared.

RESULTS

On images without SEMAR, severe metallic artifacts were often observed in the right coronary artery (#1, #2, #3) and distal anterior descending branch (#8). These artifacts were effectively suppressed by SEMAR, and the luminal accessibility was significantly improved in #3 and #8.

CONCLUSION

While pacemaker leads often cause metallic-induced artifacts, SEMAR technique reduced the artifacts and significantly improved the accessibility of coronary lumen in #3 and #8.

Adverse effects of metallic artifacts on voxel-wise analysis and tract-based spatial statistics in diffusion tensor imaging

Background Diffusion tensor imaging (DTI) is a magnetic resonance imaging (MRI) technique that reflects the Brownian motion of water molecules constrained within brain tissue. Fractional anisotropy (FA) is one of the most commonly measured DTI parameters, and can be applied to quantitative analysis of white matter as tract-based spatial statistics (TBSS) and voxel-wise analysis. Purpose To show an association between metallic implants and the results of statistical analysis (voxel-wise group comparison and TBSS) for fractional anisotropy (FA) mapping, in DTI of healthy adults. Material and Methods Sixteen healthy volunteers were scanned with 3-Tesla MRI. A magnetic keeper type of dental implant was used as the metallic implant. DTI was acquired three times in each participant: (i) without a magnetic keeper (FAnon1); (ii) with a magnetic keeper (FAimp); and (iii) without a magnetic keeper (FAnon2) as reproducibility of FAnon1. Group comparisons with paired t-test were performed as FAnon1 vs. FAnon2, and as FAnon1 vs. FAimp. Results Regions of significantly reduced and increased local FA values were revealed by voxel-wise group comparison analysis (a P value of less than 0.05, corrected with family-wise error), but not by TBSS. Conclusion Metallic implants existing outside the field of view produce artifacts that affect the statistical analysis (voxel-wise group comparisons) for FA mapping. When statistical analysis for FA mapping is conducted by researchers, it is important to pay attention to any dental implants present in the mouths of the participants.