Ring-Opening Metathesis Polymerization and Related Olefin Metathesis Reactions in Benzotrifluoride as an Environmentally Advantageous Medium

A tremendous number of solvents, either as liquids or vapors, contaminate the environment on a daily basis worldwide. Olefin metathesis, which has been widely used as high-yielding protocols for ring-opening metathesis polymerization (ROMP), ring-closing metathesis (RCM), and isomerization reactions, is typically performed in toxic and volatile solvents such as dichloromethane. In this study, the results of our systematic experiments with the Grubbs G1, G2, and Hoveyda-Grubbs HG2 catalysts proved that benzotrifluoride (BTF) can replace dichloromethane (DCM) in these reactions, providing high yields and similar or even higher reaction rates in certain cases. The ROMP of norbornene resulted not only in high yields but also in polynorbornenes with a high molecular weight at low catalyst loadings. Ring-closing metathesis (RCM) experiments proved that, with the exception of the G1 catalyst, RCM occurs with similar high efficiencies in BTF as in DCM. It was found that isomerization of (Z)-but-2-ene-1,4-diyl diacetate with the G2 and HG2 catalysts proceeds at significantly higher initial rates in BTF than in DCM, leading to rapid isomerization with high yields in a short time. Overall, BTF is a suitable solvent for olefin metathesis, such as polymer syntheses by ROMP and the ring-closing and isomerization reactions.

Additive Manufacturing of Degradable Materials via Ring-Opening Metathesis Polymerization (ROMP)

Thermoset materials comprise a significant proportion of high-performance plastics due to their shape permanence and excellent thermal and mechanical properties. However, these properties come at the expense of degradability. Here, we show for the first time that the industrial thermoset polydicyclopentadiene (PDCPD) can be additively manufactured (AM) with degradable 2,3-dihydrofuran (DHF) linkages using a photochemical approach. Treatment of the manufactured objects with acid results in rapid degradation to soluble byproducts. This work highlights the potential of ring-opening metathesis polymerization (ROMP) chemistry to create degradable materials amenable to advanced manufacturing processes.

A Degradable and Antimicrobial Surface-attached Polymer Hydrogela

Surface-attached, degradable polymer hydrogels with potential antimicrobial activity are reported. They were obtained by ring-opening metathesis copolymerization (ROMP) of a monomer with potential bioactivity and a monomer that carries a benzophenone cross-linker and a hydrolyzable group. The hydrolyzable group was either an ester or an anhydride group. The copolymers thus obtained were spin-coated onto silicon wafers and UV-irradiated to induce C,H cross-linking of the benzophenone groups and obtain the target polymer networks. Immersion of these networks into aqueous media triggered network degradation. The degradation speed depended on the nature of the intended break points (ester or anhydride groups), the number of cross-links per polymer chain, and the surrounding medium. By releasing bioactive polymer fragments to the medium ("leaching") and by regenerating the hydrogel surface during the degradation process, the hydrogels potentially have two ways to prevent biofilm formation on their surface.

Fucosylated Molecules Competitively Interfere with Cholera Toxin Binding to Host Cells

Cholera toxin (CT) enters host intestinal epithelia cells, and its retrograde transport to the cytosol results in the massive loss of fluids and electrolytes associated with severe dehydration. To initiate this intoxication process, the B subunit of CT (CTB) first binds to a cell surface receptor displayed on the apical surface of the intestinal epithelia. While the monosialoganglioside GM1 is widely accepted to be the sole receptor for CT, intestinal epithelial cell lines also utilize fucosylated glycan epitopes on glycoproteins to facilitate cell surface binding and endocytic uptake of the toxin. Further, l-fucose can competively inhibit CTB binding to intestinal epithelia cells. Here, we use competition binding assays with l-fucose analogs to decipher the molecular determinants for l-fucose inhibition of cholera toxin subunit B (CTB) binding. Additionally, we find that mono- and difucosylated oligosaccharides are more potent inhibitors than l-fucose alone, with the LeY tetrasaccharide emerging as the most potent inhibitor of CTB binding to two colonic epithelial cell lines (T84 and Colo205). Finally, a non-natural fucose-containing polymer inhibits CTB binding two orders of magnitude more potently than the LeY glycan when tested against Colo205 cells. This same polymer also inhibits CTB binding to T84 cells and primary human jejunal epithelial cells in a dose-dependent manner. These findings suggest the possibility that polymeric display of fucose might be exploited as a prophylactic or therapeutic approach to block the action of CT toward the human intestinal epithelium.

On the Limits of Benzophenone as Cross-Linker for Surface-Attached Polymer Hydrogels

The synthesis of different photo-reactive poly(alkenyl norbornenes) and poly(oxonorbornenes) containing benzophenone (BP) via ring-opening metatheses polymerization (ROMP) is described. These polymers are UV irradiated to form well-defined surface-attached polymer networks and hydrogels. The relative propensity of the polymers to cross-link is evaluated by studying their gel content and its dependency on BP content, irradiation wavelength (254 or 365 nm) and energy dose applied (up to 11 J·cm-²). Analysis of the UV spectra of the polymer networks demonstrates that the poly(oxonorbornenes) show the expected BP-induced crosslinking behavior at 365 nm, although high irradiation energy doses and BP content are needed. However, these polymers undergo chain scission at 254 nm. The poly(alkenyl norbornenes), on the other hand, do not cross-link at 365 nm, whereas moderate to good cross-linking is observed at 254 nm. UV spectra demonstrate that the cross-linking at 254 nm is due to BP cross-linking combined with a [2 + 2] cylcoaddition of the alkenyl double bonds. This indicates limitations of benzophenone as a universally applicable cross-linking for polymer networks and hydrogels.

Fluorescent ROMP Monomers and Copolymers for Biomedical Applications

The synthesis and characterization of a series of green, blue and red-fluorescent exo-oxanorbornene acid and imide monomers carrying nitrobenzofurazan, coumarin, and Rhodamin B, respectively, as fluorophores is presented. These monomers carry oxanorbornene as polymerizable unit, and were readily copolymerized with bioactive functional oxanorbornene monomers by ring-opening metathesis polymerization (ROMP), as demonstrated by gel permeation chromatography and NMR spectroscopy. Due to the ease of synthesis of these monomers, and their cost-effectiveness compared many to other fluorescent probes, they are useful for biomaterials applications.

A Precision Ethylene-Styrene Copolymer with High Styrene Content from Ring-Opening Metathesis Polymerization of 4-Phenylcyclopentene

Ring-opening metathesis polymerization of 4-phenylcyclopentene is investigated for the first time under various conditions. Thermodynamic analysis reveals a polymerization enthalpy and entropy sufficient for high molar mass and conversions at lower temperatures. In one example, neat polymerization using Hoveyda-Grubbs second generation catalyst at -15 °C yields 81% conversion to poly(4-phenylcyclopentene) (P4PCP) with a number average molar mass of 151 kg mol(-1) and dispersity of 1.77. Quantitative homogeneous hydrogenation of P4PCP results in a precision ethylene-styrene copolymer (H2 -P4PCP) with a phenyl branch at every fifth carbon along the backbone. This equates to a perfectly alternating trimethylene-styrene sequence with 71.2% w/w styrene content that is inaccessible through molecular catalyst copolymerization strategies. Differential scanning calorimetry confirms P4PCP and H2 -P4PCP are amorphous materials with similar glass transition temperatures (Tg ) of 17 ± 2 °C. Both materials present well-defined styrenic analogs for application in specialty materials or composites where lower softening temperatures may be desired.

ROMP-Derived cyclooctene-based monolithic polymeric materials reinforced with inorganic nanoparticles for applications in tissue engineering

Porous monolithic inorganic/polymeric hybrid materials have been prepared via ring-opening metathesis copolymerization starting from a highly polar monomer, i.e., cis-5-cyclooctene-trans-1,2-diol and a 7-oxanorborn-2-ene-derived cross-linker in the presence of porogenic solvents and two types of inorganic nanoparticles (i.e., CaCO₃ and calcium hydroxyapatite, respectively) using the third-generation Grubbs initiator RuCl₂(Py)₂(IMesH₂)(CHPh). The physico-chemical properties of the monolithic materials, such as pore size distribution and microhardness were studied with regard to the nanoparticle type and content. Moreover, the reinforced monoliths were tested for the possible use as scaffold materials in tissue engineering, by carrying out cell cultivation experiments with human adipose tissue-derived stromal cells.