Fabrication of Activated Carbon Decorated with ZnO Nanorod-Based Electrodes for Desalination of Brackish Water Using Capacitive Deionization Technology

Capacitive deionization (CDI) is a promising and cost-effective technology that is currently being widely explored for removing dissolved ions from saline water. This research developed materials based on activated carbon (AC) materials modified with zinc oxide (ZnO) nanorods and used them as high-performance CDI electrodes for water desalination. The as-prepared electrodes were characterized by cyclic voltammetry, and their physical properties were studied through SEM and XRD. ZnO-coated AC electrodes revealed a better specific absorption capacity (SAC) and an average salt adsorption rate (ASAR) compared to pristine AC, specifically with values of 123.66 mg/g and 5.06 mg/g/min, respectively. The desalination process was conducted using a 0.4 M sodium chloride (NaCl) solution with flow rates from 45 mL/min to 105 mL/min under an applied potential of 1.2 V. Furthermore, the energy efficiency of the desalination process, the specific energy consumption (SEC), and the maximum and minimum of the effluent solution concentration were quantified using thermodynamic energy efficiency (TEE). Finally, this work suggested that AC/ZnO material has the potential to be utilized as a CDI electrode for the desalination of saline water.

Desalination Fuel Cells with High Thermodynamic Energy Efficiency

Sustainably-produced hydrogen is currently intensively investigated as an energy carrier to replace fossil fuels. We here characterize an emerging electrochemical cell termed a desalination fuel cell (DFC) that can continuously generate electricity and desalinate water while using hydrogen and oxygen gases as inputs. We investigated two operational modes, a near-neutral pH operation with H₂, O₂, and feedwater inputs (H₂|O₂), and a pH-gradient mode with H₂, O₂, feedwater, acid, and base inputs (H₂ + B|O₂ + A). We show that our cell can desalinate water with 30 g/L of salt content to near-zero salt concentration, while generating an enormous amount of electricity of up to 8.6 kW h per m³ of treated water when operated in the pH-gradient mode and up to about 1 kW h per m³ for the near-neutral mode. We quantify the thermodynamic energy efficiency of our device in both operational modes, showing that significantly higher efficiency is achievable in the pH-gradient mode, with up to 95.6%. Further, we present results elucidating the key bottlenecks in the DFC process, showing that the cell current and voltage are limited in the near-neutral pH operation due to a lack of H⁺ to serve as a reactant, and further reinforce the deleterious effect of halide poisoning on the cathode Pt catalyst and cell open circuit voltage. Such findings demonstrate that new fuel cell catalyst materials, tailored for environments associated with water treatment, can unlock yet-improved performance.