Laser-Induced Graphene Arrays-Based Three-Phase Interface Enzyme Electrode for Reliable Bioassays

Electrochemical oxidase biosensors have been widely applied in healthcare, environmental measurements and the biomedical field. However, the low and fluctuant oxygen levels in solution and the high anodic detection potentially restrict the assay accuracy. To address these problems, in this work, we constructed a three-phase interface enzyme electrode by sequentially immobilizing H₂O₂ electrocatalysts and an oxidase layer on a superhydrophobic laser-induced graphene (LIG) array substrate. The LIG-based enzyme electrode possesses a solid-liquid-air three-phase interface where constant and sufficient oxygen can be supplied from the air phase to the enzymatic reaction zone, which enhances and stabilizes the oxidase kinetics. We discovered that the enzymatic reaction rate is 21.2-fold improved over that of a solid-liquid diphase system where oxygen is supplied from the liquid phase, leading to a 60-times wider linear detection range. Moreover, the three-phase enzyme electrode can employ a cathodic measuring principle for oxidase catalytic product H₂O₂ detection, which could minimize interferences arising from oxidizable molecules in biofluids and increase the detection selectivity. This work provides a simple and promising approach to the design and construction of high-performance bioassay systems.

Bioinspired Photocatalytic NADH Regeneration by Covalently Metalated Carbon Nitride for Enhanced CO2 Reduction

Natural photosynthesis is a highly unified biocatalytic system, which coupled cofactor (NAD(P)H) regeneration and enzymatic CO₂ reduction efficiently for solar energy conversion. Mimicking nature, a novel system with Rh complex covalently grafted onto NH₂ -functionalized polymeric carbon nitride (NH₂ -PCN) was constructed. The integrated connection of the light-harvesting and electron mediation modules as Rh_m3 -N-PCN could promote the efficient NAD⁺ reduction to NADH. As a result, the integrated system exhibited a conversion of ∼66 % within 20 minutes. By further coupling in situ generated NADH with formate dehydrogenase (FDH), a photoenzymatic production of formic acid (HCOOH) from CO₂ was accomplished. Moreover, by immobilizing FDH onto a hydrophobic membrane, an enhanced HCOOH production of ∼5.0 mM can be obtained due to the concentrated CO₂ on the gas-liquid-solid three-phase interface. Our work herein provides an integrated strategy for coupling the anchored electron mediator with immobilized enzyme for enhanced artificial photosynthesis.

Electrochemically Selective Ammonia Extraction from Nitrate by Coupling Electron- and Phase-Transfer Reactions at a Three-Phase Interface

As an attractive alternative to the Haber-Bosch process, an electrochemical process for nitrate (NO₃^-) reduction to ammonia (NH₃) has made great strides in the development of advanced electrocatalysts to suppress the unavoidable H₂ evolution reaction (HER) and side production of N₂. However, isochronous NH₃ separation and recovery from the mother liquor, especially wastewaters, are awfully neglected in state-of-the-art electrochemical systems. Here, we designed electrochemical three-phase interfaces constructed by a CoP cathode and a flat-sheet gas membrane to achieve NO₃^- reduction to ammonia and simultaneous NH₃ recovery in the form of (NH₄)₂SO₄ from wastewaters. The partial current density for ammonia yield and its recovery rate were 37.3 mA cm^-2 and 306 g NH₃-N m^-2 day^-1, respectively, accompanying 100% NO₃^- removal and 99.7% NH₃ extraction. By favoring the originally unfavored side reaction HER, it served as the driving force for NH₃ separation from the wastewater through gas stripping and membrane separation at the three-phase interfaces. Unexpectedly, the timely NH₃ separation could also promote the reduction of NO₃^- to ammonia due to the release of much more active sites. From these, we envision that the present electrochemical process can be routinely employed as an effective strategy to address energy and environmental issues with NH₃ recovery from NO₃^- wastewater.

Efficient Electrocatalytic N2 Reduction on Three-Phase Interface Coupled in a Three-Compartment Flow Reactor for the Ambient NH3 Synthesis

The electrochemical N₂ reduction reaction (eNRR) represents a carbon-free alternative to the Haber-Bosch process for a sustainable NH₃ synthesis powered by renewable energy under ambient conditions. Despite significant efforts to develop catalyst activity and selectivity toward eNRR, an appropriate electrochemical system to obstruct the drawback of low N₂ solubility remains broadly unexplored. Here, we demonstrate an electrocatalytic system combining a ruthenium/carbon black gas diffusion electrode (Ru/CB GDE) with a three-compartment flow cell, enabling solid-liquid-gas catalytic interfaces for the highly efficient Ru-catalyzed eNRR. The electrolyte optimization and the Ru/CB GDE development through the hydrophobicity, the Ru/CB loading, and the post-treatment have revealed the crucial contribution of interfacial N₂ transportation and local pH environment. The optimized hydrophobic Ru/CB GDE generated excellent eNRR performance, achieving a high NH₃ yield rate of 9.9 × 10^-10 mol/cm² s at -0.1 V vs RHE, corresponding to the highest faradaic efficiency of 64.8% and a specific energy efficiency of 40.7%, exceeding the most reported system. This work highlights the critical role of design and optimization of the GDE-flow cell combination and provides a valuable practicable solution to enhance the electrochemical reaction involving gas-phase reactants with low solubility.

Reduced Biofilm Formation at the Air-Liquid-Solid Interface via Introduction of Surfactants

Reduced biofilm formation is highly desirable in applications ranging from transportation to separations and healthcare. Biofilms often form at the three-phase interface where air, liquid, and solid coexist due to the close proximity to nutrients and oxygen. Reducing biofilm formation at the triple interface presents challenges because of the conflicting requirements for hydrophobicity at the air-solid interface (for self-cleaning properties) and for hydrophilicity at the liquid-solid interface (for reduced foulant adhesion). Meeting those needs simultaneously likely entails a dynamic surface, capable of shifting the surface energy landscape in response to wetting conditions and thus enabling hydrophobicity in air and hydrophilicity in water. Here, we designed a facile approach to render existing surfaces resistant to biofilm formation at the triple interface. By adding trace amounts (∼0.1 mM) of surfactants, biofilm formation of Pseudomonas aeruginosa (known to form biofilm at the triple interface) was reduced on all surfaces tested, ranging from hydrophilic to hydrophobic, polar to nonpolar. That reduced fouling was not a result of the known antimicrobial effects. Instead, it was attributed to the surface-adsorbed surfactants that dynamically control surface energy at the triple interface. To further understand the effect of surfactant-surface interactions on biofilm reduction, we systematically varied the surfactant charge type and surface properties (surface energy and charge). Electrostatic interactions between surfactants and surfaces were identified as an influential factor when predicting the relative fouling reduction upon introduction of surfactants. Nevertheless, biofilm formation was reduced even on the charge-neutral, fluorinated surface made of poly(1H, 1H, 2H, 2H-perfluorodecyl acrylate) by more than 2-fold simply via adding 0.2 mM dodecyl trimethylammonium chloride or 0.3 mM sodium dodecyl sulfate. Given its robustness, this strategy is broadly applicable for reducing fouling on existing surfaces, which in turn improves the cost-effectiveness of membrane separations and mitigates contaminations and nosocomial infections in healthcare.