Treatment of Monochlorobenzene from Polymers Process through Electrochemical Oxidation

With the rapid development of the economy and the demands of people's lives, the usage amount of polymer materials is significantly increasing globally. Chlorobenzenes (CBS) are widely used in the industrial, agriculture and chemical industries, particularly as important chemical raw materials during polymers processes. CBS are difficult to remove due to their properties, such as being hydrophobic, volatile and persistent and biotoxic, and they have caused great harm to the ecological environment and human health. Electrochemical oxidation technology for the treatment of refractory pollutants has been widely used due to its high efficiency and easiness of operation. Thus, the electrochemical oxidation system was established for the efficient treatment of monochlorobenzene (MCB) waste gas. The effect of a single factor, such as anode materials, cathode materials, the electrolyte concentration, current density and electrode distance on the removal efficiency (RE) of MCB gas were first studied. The response-surface methodology (RSM) was used to investigate the relationships between different factors' conditions (current density, electrolyte concentration, electrode distance), and a prediction model was established using the Design-Expert 10.0.1 software to optimize the reaction conditions. The results of the one-factor experiments showed that when treating 2.90 g/m3 MCB gas with a 0.40 L/min flow rate, Ti/Ti4O7 as an anode, stainless steel wire mesh as a cathode, 0.15 mol/L NaCl electrolyte, 10.0 mA/cm2 current density and 4.0 cm electrode distance, the average removal efficiency (RE), efficiency capacity (EC) and energy consumption (Esp) were 57.99%, 20.18 g/(m3·h) and 190.2 (kW·h)/kg, respectively. The results of the RSM showed that the effects of the process parameters on the RE of MBC were as follows: current density > electrode distance > electrolyte concentration; the interactions effects on the RE of MBC were in the order of electrolyte concentration and current density > current density and electrode distance > electrolyte concentration and electrode distance; the optimal experimental conditions were as follows: the concentration of electrolyte was 0.149 mol/L, current density was 18.11 mA, electrode distance was 3.804 cm. Under these conditions, the RE achieved 66.43%. The response-surface variance analysis showed that the regression model reached a significant level, and the validation results were in agreement with the predicted results, which proved the feasibility of the model. The model can be applied to treat the CBS waste gas of polymer processes through electrochemical oxidation.

Bioelimination of low methane concentrations emitted from wastewater treatment plants: a review

Sewage from residents and industries is collected and transported to wastewater treatment plants (WWTPs) with sewer networks. The operation of WWTPs results in emissions of greenhouse gases, such as methane (CH₄), mostly due to sludge anaerobic digestion. Amounts of emissions depend on the source of influent, i.e. municipal and industrial wastewater as well as sewer systems (gravity and rising). Wastewater is the fifth-largest source of anthropogenic CH₄ emissions in the world and represents 7-9% of total global CH₄ emissions into the atmosphere. Global wastewater CH₄ emission grew by approximately 20% from 2005 to 2020 and is expected to grow by 8% between 2020 and 2030, which makes wastewater an important CH₄ emitter worldwide. This review initially considers the emission of CH₄ from WWTPs and sewer networks. In the second part, biotechniques available for biodegradation of low CH₄ concentrations (<5% v/v) encountered in WWTPs have been studied. The paper reviews major bioreactor configurations for the treatment of polluted air, i.e. biotrickling filters, bioscrubbers, two-liquid phase bioreactors, biofilters, and hybrid reactor configurations, after which it focuses on CH₄ biofiltration systems. Biofiltration represents a simple and efficient approach to bio-oxidize CH₄ in waste gases from WWTPs. Major factors influencing a biofilter's performance along with knowledge gaps in relation to its application for treating gaseous emissions from WWTPs are discussed.

Enhancing Chlorobenzene Biodegradation by Delftia tsuruhatensis Using a Water-Silicone Oil Biphasic System

In this study, a water-silicone oil biphasic system was developed to enhance the biodegradation of monochlorobenzene (CB) by Delftia tsuruhatensis LW26. Compared to the single phase, the biphasic system with a suitable silicone oil fraction (v/v) of 20% allowed a 2.5-fold increase in the maximum tolerated CB concentration. The CB inhibition on D. tsuruhatensis LW26 was reduced in the presence of silicone oil, and the electron transport system activity was maintained at high levels even under high CB stress. Adhesion of cells to the water-oil interface at the water side was observed using confocal laser scanning microscopy. Nearly 75% of cells accumulated on the interface, implying that another interfacial substrate uptake pathway prevailed besides that initiated by cells in the aqueous phase. The 8-fold increase in cell surface hydrophobicity upon the addition of 20% (v/v) silicone oil showed that silicone oil modified the surface characteristics of D. tsuruhatensis LW26. The protein/polysaccharide ratio of extracellular polymeric substances (EPS) from D. tsuruhatensis LW26 presented a 3-fold enhancement. These results suggested that silicone oil induced the increase in the protein content of EPS and rendered cells hydrophobic. The resulting hydrophobic cells could adhere on the water-oil interface, improving the mass transfer by direct CB uptake from silicone oil.