Research and Application of Biomass-Based Wood Flame Retardants: A Review

Wood is widely used as a construction material due to its many advantages, such as good mechanical properties, low production costs, and renewability. However, its flammability limits its use in construction. To solve the problem of wood flammability, the most common method to improve the fire safety of wood is to modify the wood by deep impregnation or surface coating with flame retardants. Therefore, many researchers have found that environmentally friendly and low-cost biomass materials can be used as a source of green flame retardants. Two aspects of biomass-based intumescent flame retardants are summarized in this paper. On the one hand, biomass is used as one of the three sources or as a flame-retardant synergist in combination with other flame retardants, which are called composite biomass intumescent flame retardants. On the other hand, biomass is used alone as a feedstock to produce all-biomass intumescent flame retardants. In addition, the potential of biomass-based materials as an environmentally friendly and low-cost FR source to produce high-performance biomass-based flame retardants with improved technology was also discussed in detail. The development of biomass-based intumescent flame retardants represents a viable and promising approach for the efficient and environmentally friendly production of biomass-based flame retardants.

pH-Responsive Carbon Foams with Switchable Wettability Made from Larch Sawdust for Oil Recovery

The global challenge of oil pollution calls for the efficient selective recovery of oil or organics from oil-water mixtures. A pH-responsive carbon foam (CF) made from liquefied larch sawdust (LLS) with switchable wettability was fabricated in this work. After grafted with poly 4-vinyl pyridine (P4vp), the CF obtained a switchable wettability surface, which allowed the CF to exhibit superhydrophilicity and superhydrophobicity at different pH levels, respectively. The results revealed that the pH-responsive CF possessed a three-dimensional (3D) spongy-like skeleton and porous structure with a diameter between 50 and 200 µm. Thus, the pH-responsive CF could absorb 15-35 g/g of oil/organics in a neutral aqueous solution at pH = 7 and desorb all the absorbate within 40 s after immersion in an aqueous solution at pH = 1. Moreover, only about 2.8% loss was observed for organic (chloroform) absorption and recovery after reusing up to 15 cycles, which indicated promising prospects in oil and organic recovery.

Building Materials Made of Wood Waste a Solution to Achieve the Sustainable Development Goals

In order to reduce the impact of human activities on the environment, in 2015, the United Nations launched the 2030 Agenda for Sustainable Development, proposing 17 Sustainable Development Goals with 169 associated targets. It is well-known that the construction industry is a major contributor to global CO₂ emissions, and if a solution to reduce construction activity is not possible, considering the increasing population, then other solutions must be developed to decrease their negative environmental impact. In this context, the purpose of this paper is to investigate whether the use of wood waste as a building material can be a solution to achieve the Sustainable Development Goals. The research procedure included a bibliometric literature search, a scientometric analysis and an in-depth discussion. The analysis was done with the help of the software VOSviewer and Bibliometrix; the data were extracted mainly from the ISI Web of Science database. The extraction of data was done using the PRISMA method, and thus a sample of 212 peer-reviewed journal articles was established. The main results indicate an increasing interest in this topic in the last several years, as well as a switch from considering wood waste as just a source to generate heat and energy to the use of wood waste as a building material. The main uses of wood waste as a building material are in the composition of particleboards and in various mortar and concrete mixtures. The field of wood waste has many potential directions towards future development, and if the immense treasure represented by the forests, and implicitly the wood, is used efficiently, it can be a good solution to the problem of sustainable development of society.

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.

Wood and the Activity of Dead Tissue

Wood is a prototypical biological material, which adapts to mechanical requirements. The microarchitecture of cellulose fibrils determines the mechanical properties of woody materials, as well as their actuation properties, based on absorption and desorption of water. Herein it is argued that cellulose fiber orientation corresponds to an analog code that determines the response of wood to humidity as an active material. Examples for the harvesting of wood activity, as well as bioinspiration, are given.

Synthesis of Honeycomb-Like Carbon Foam from Larch Sawdust as Efficient Absorbents for Oil Spills Cleanup and Recovery

Hydrophobic oil absorbents with interconnected porous structure have been widely used in dealing with the pervasive environmental issue of oil spills. In this work, hydrophobic foams with 3D interconnected porous honeycomb structures of liquefied-larch-based polymer foam (LLB-PF) and its carbonized product liquefied-larch-based carbon foam (LLB-CF) was prepared from larch sawdust waste and used for oil and organics separation. The results revealed that the 3D interconnected and open-cell honeycomb structure of LLB-PF was formed simultaneously during self-foaming, which remained intact even after carbonization. The two ultralight foams, especially LLB-PF, exhibited remarkable oil/water selectivity. The foams exhibited efficient and rapid absorption capacities, not only for oils but also for organic solvents. LLB-PF and LLB-CF could absorb tetrachloromethane and epoxidized soybean oil up to 88 and 153 times their own weight, respectively. The recycle tests showed that LLB-PF and LLB-CF exhibited excellent absorption capacities even after five cycles, demonstrating an excellent cyclability. The high oil and organic solvent absorption performance along with the renewable and low-cost starting materials positions LLB-PF and LLB-CF foams as promising candidates with great potential for oil and organics cleanup.

Highly Efficient UV Protection of the Biomaterial Wood by A Transparent TiO2/Ce Xerogel

Titanium dioxide is widely used in sunscreens because of its strong ultraviolet (UV) light absorbing capabilities and its resistance to discoloration under UV exposure. However, when deposited as a thin film, the high refractive index of titanium dioxide typically results in whiteness and opacity, which limits the use of titanium dioxide for material surfaces, for which long-term natural appearance is of high relevance. Since the whitish appearance is due to the strong light scattering and reflection on the interface of oxide particles and air, one can increase the transparency of TiO₂ coatings by forming a continuous TiO₂ layer. The purpose of the present article is 2-fold. First, we show that, in the presence of cerium ammonium nitrate, titanium dioxide can be turned from a white powder into a TiO₂/Ce xerogel via a facile bottom-up fabrication process. Second, we demonstrate that the transparent TiO₂/Ce xerogel can diminish surface deterioration induced by UV light and preserve the natural appearance of the highly abundant biomaterial wood. Furthermore, EPR spectroscopy revealed that the TiO₂/Ce xerogel coating suppresses free radical generation on wood surfaces upon UV irradiation. Our research expands the applicability of the protective effect of titanium dioxide to coatings for natural engineering materials, which will become increasingly important in future bioeconomies.