Development and testing of a prototype indicator-based tool for identification of potential problem areas for marine litter in Europe's seas

We demonstrate a prototype multi-metric indicator-based assessment tool (i.e. Marine Litter Assessment Tool - MALT) for mapping and identification of 'problem areas' and 'non-problem areas' regarding the occurrence of marine litter in Europe's seas. The study is based on a European-wide data set consisting of three marine litter indicators: (1) litter at the seafloor, (2) beach litter and (3) floating micro-litter. This publicly available data allowed litter status to be determined in 1,957,081 km2 (19.1 %) of the total area of Europe's seas (10,243,474 km2). Of the area assessed, 25.8 % (505,030 km2) was found to be 'non-problem areas' whilst 'problem areas' accounted for 74.2 % (1,452,051 km2). This indicates that marine litter is a large-scale problem in Europe's seas.

Patterns of microparticles in blank samples: A study to inform best practices for microplastic analysis

Quality assurance and quality control (QA/QC) techniques are critical to analytical chemistry, and thus the analysis of microplastics. Procedural blanks are a key component of QA/QC for quantifying and characterizing background contamination. Although procedural blanks are becoming increasingly common in microplastics research, how researchers acquire a blank and report and/or use blank contamination data varies. Here, we use the results of laboratory procedural blanks from a method evaluation study to inform QA/QC procedures for microplastics quantification and characterization. Suspected microplastic contamination in the procedural blanks, collected by 12 participating laboratories, had between 7 and 511 particles, with a mean of 80 particles per sample (±SD 134). The most common color and morphology reported were black fibers, and the most common size fraction reported was 20-212 μm. The lack of even smaller particles is likely due to limits of detection versus lack of contamination, as very few labs reported particles <20 μm. Participating labs used a range of QA/QC techniques, including air filtration, filtered water, and working in contained/'enclosed' environments. Our analyses showed that these procedures did not significantly affect blank contamination. To inform blank subtraction, several subtraction methods were tested. No clear pattern based on total recovery was observed. Despite our results, we recommend commonly accepted procedures such as thorough training and cleaning procedures, air filtration, filtered water (e.g., MilliQ, deionized or reverse osmosis), non-synthetic clothing policies and 'enclosed' air flow systems (e.g., clean cabinet). We also recommend blank subtracting by a combination of particle characteristics (color, morphology and size fraction), as it likely provides final microplastic particle characteristics that are most representative of the sample. Further work should be done to assess other QA/QC parameters, such as the use of other types of blanks (e.g., field blanks, matrix blanks) and limits of detection and quantification.

Finding the Balance between Research and Monitoring: When Are Methods Good Enough to Understand Plastic Pollution?

Plastic pollution is an international environmental problem. Desire to act is shared from the public to policymakers, yet motivation and approaches are diverging. Public attention is directed to reducing plastic consumption, cleaning local environments, and engaging in citizen science initiatives. Policymakers and regulators are working on prevention and mitigation measures, while international, regional, and national bodies are defining monitoring recommendations. Research activities are focused on validating approaches to address goals and comparing methods. Policy and regulation are eager to act on plastic pollution, often asking questions researchers cannot answer with available methods. The purpose of monitoring will define which method is implemented. A clear and open dialogue between all actors is essential to facilitate communication on what is feasible with current methods, further research, and development needs. For example, some methods can already be used for international monitoring, yet limitations including target plastic types and sizes, sampling strategy, available infrastructure and analytical capacity, and harmonization of generated data remain. Time and resources to advance scientific understanding must be balanced against the need to answer pressing policy issues.

Microplastic variability in subsurface water from the Arctic to Antarctica

Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm-5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m³ (ranging from 0 to 2.6 items/m³), with an equal average abundance for both fragments and fibers (0.34 items/m³). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7-7.5 μg/m³) than the North Atlantic and Siberian Arctic (0.6 μg/m³). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located.

A review of the use of microplastics in reconstructing dated sedimentary archives

Buried microplastics (plastics, <5 mm) have been documented within the sediment column of both marine and lacustrine environments. However, the number of peer-review studies published on the subject remains limited and confidence in data reliability varies considerably. Here we critically review the state of the literature on microplastic loading inventories in dated sedimentary and soil profiles. We conclude that microplastics are being sequestered across a variety of sedimentary environments globally, at a seemingly increasing rate. However, microplastics are also readily mobilised both within depositional settings and the workplace. Microplastics are commonly reported from sediments dated to before the onset of plastic production and researcher-derived microplastics frequently contaminate samples. Additionally, the diversity of microplastic types and issues of constraining source points has so far hindered interpretation of depositional settings. Therefore, further research utilizing high quality data sets, greater levels of reporting transparency, and well-established methodologies from the geosciences will be required for any validation of microplastics as a sediment dating method or in quantifying temporally resolved microplastic loading inventories in sedimentary sinks with confidence.

Accumulation and distribution of microplastics in coastal sediments from the inner Oslofjord, Norway

Microplastic presence in benthic marine systems is a widely discussed topic. The influence of the natural matrix on microplastic distribution within the sedimentary matrix is often overlooked. Marine sediments from the western inner Oslofjord, Norway, were investigated for temporal trends, with a particular focus on the relationship between sediment grain-sizes and microplastic distribution. Density separation, optical microscopy and chemical validation were used to categorize microplastics. Microplastic concentrations ranged from 0.02 to 1.71 MPs g ^-1 dry weight (dw). Fibres were the most common (76%), followed by fragments and films (18%, 6%). Common polymers were polyesters (50%), polypropylene (18%), polymethylmethacrylate (9%), rayon and viscose (5%) and elastane (4%). Microplastics appear to accumulate preferentially according to their morphology and polymer type in certain sediment grain-sizes. Microplastics inputs to the Oslofjord appear to derive from a wastewater treatment plant in the vicinity. Although, the redistribution of microplastics within the fjord needs further investigation.

Moving forward in microplastic research: A Norwegian perspective

Given the increasing attention on the occurrence of microplastics in the environment, and the potential environmental threats they pose, there is a need for researchers to move quickly from basic understanding to applied science that supports decision makers in finding feasible mitigation measures and solutions. At the same time, they must provide sufficient, accurate and clear information to the media, public and other relevant groups (e.g., NGOs). Key requirements include systematic and coordinated research efforts to enable evidence-based decision making and to develop efficient policy measures on all scales (national, regional and global). To achieve this, collaboration between key actors is essential and should include researchers from multiple disciplines, policymakers, authorities, civil and industry organizations, and the public. This further requires clear and informative communication processes, and open and continuous dialogues between all actors. Cross-discipline dialogues between researchers should focus on scientific quality and harmonization, defining and accurately communicating the state of knowledge, and prioritization of topics that are critical for both research and policy, with the common goal to establish and update action plans for holistic benefit. In Norway, cross-sectoral collaboration has been fundamental in supporting the national strategy to address plastic pollution. Researchers, stakeholders and the environmental authorities have come together to exchange knowledge, identify knowledge gaps, and set targeted and feasible measures to tackle one of the most challenging aspects of plastic pollution: microplastic. In this article, we present a Norwegian perspective on the state of knowledge on microplastic research efforts. Norway's involvement in international efforts to combat plastic pollution aims at serving as an example of how key actors can collaborate synergistically to share knowledge, address shortcomings, and outline ways forward to address environmental challenges.

Understanding the occurrence and fate of microplastics in coastal Arctic ecosystems: The case of surface waters, sediments and walrus (Odobenus rosmarus)

The Arctic ecosystem receives contaminants transported through complex environmental pathways - such as atmospheric, riverine and oceanographic transport, as well as local infrastructure. A holistic approach is required to assess the impact that plastic pollution may have on the Arctic, especially with regard to the unseen microplastics. This study presents data on microplastics in the Arctic fjords of western Svalbard, by addressing the ecological consequences of their presence in coastal surface waters and sediment, and through non-invasive approaches by sampling faeces from an apex predator, the benthic feeder walrus (Odobenus rosmarus). Sample locations were chosen to represent coastal areas with different degrees of anthropogenic pollution and geographical features (e.g., varying glacial coverage of catchment area, winter ice cover, traffic, visitors), while also relevant feeding grounds for walrus. Microplastics in surface water and sediments ranged between <LOD (limit of detection)-3.5 particles/m³ and <LOD-26 particles/kg dry weight, respectively. This study shows that microplastics may also enter the Arctic food web as the microplastic concentration in walrus faeces were estimated at an average of 34 particles/kg. Polyester was identified by Fourier transformation infrared spectroscopy (FT-IR) as the most common plastic polymer (58% in water, 31% in walrus), while fibres were the most common shape (65% water, 71% in sediment, 70% walrus). There was no significant difference in microplastic occurrence between water samples from populated or remote fjords, suggesting that microplastics are a ubiquitous contaminant which is available for interaction with Arctic marine animals even at distances from settlements. The present study contributes to our understanding of microplastics in the remote Arctic ecosystem. It also identifies the potential of non-invasive sampling methods for investigating Arctic pinnipeds. This approach will need further development and standardisation before utilisation to monitor plastic pollution in other marine mammals.

Proceed with caution: The need to raise the publication bar for microplastics research

Plastic is a ubiquitous contaminant of the Anthropocene. The highly diverse nature of microplastic pollution means it is not a single contaminant, but a suite of chemicals that include a range of polymers, particle sizes, colors, morphologies, and associated contaminants. Microplastics research has rapidly expanded in recent years and has led to an overwhelming consideration in the peer-reviewed literature. While there have been multiple calls for standardization and harmonization of the research methods used to study microplastics in the environment, the complexities of this emerging field have led to an exploration of many methods and tools. While different research questions require different methods, making standardization often impractical, it remains import to harmonize the outputs of these various methodologies. We argue here that in addition to harmonized methods and quality assurance practices, journals, editors and reviewers must also be more proactive in ensuring that scientific papers have clear, repeatable methods, and contribute to a constructive and factual discourse on plastic pollution. This includes carefully considering the quality of the manuscript submissions and how they fit into the larger field of research. While comparability and reproducibility is critical in all fields, we argue that this is of utmost importance in microplastics research as policy around plastic pollution is being developed in real time alongside this evolving scientific field, necessitating the need for rigorous examination of the science being published.

Reporting Guidelines to Increase the Reproducibility and Comparability of Research on Microplastics

The ubiquitous pollution of the environment with microplastics, a diverse suite of contaminants, is of growing concern for science and currently receives considerable public, political, and academic attention. The potential impact of microplastics in the environment has prompted a great deal of research in recent years. Many diverse methods have been developed to answer different questions about microplastic pollution, from sources, transport, and fate in the environment, and about effects on humans and wildlife. These methods are often insufficiently described, making studies neither comparable nor reproducible. The proliferation of new microplastic investigations and cross-study syntheses to answer larger scale questions are hampered. This diverse group of 23 researchers think these issues can begin to be overcome through the adoption of a set of reporting guidelines. This collaboration was created using an open science framework that we detail for future use. Here, we suggest harmonized reporting guidelines for microplastic studies in environmental and laboratory settings through all steps of a typical study, including best practices for reporting materials, quality assurance/quality control, data, field sampling, sample preparation, microplastic identification, microplastic categorization, microplastic quantification, and considerations for toxicology studies. We developed three easy to use documents, a detailed document, a checklist, and a mind map, that can be used to reference the reporting guidelines quickly. We intend that these reporting guidelines support the annotation, dissemination, interpretation, reviewing, and synthesis of microplastic research. Through open access licensing (CC BY 4.0), these documents aim to increase the validity, reproducibility, and comparability of studies in this field for the benefit of the global community.

Isolation and Extraction of Microplastics from Environmental Samples: An Evaluation of Practical Approaches and Recommendations for Further Harmonization

Researchers have been identifying microplastics in environmental samples dating back to the 1970s. Today, microplastics are a recognized environmental pollutant attracting a large amount of public and government attention, and in the last few years the number of scientific publications has grown exponentially. An underlying theme within this research field is to achieve a consensus for adopting a set of appropriate procedures to accurately identify and quantify microplastics within diverse matrices. These methods should then be harmonized to produce quantifiable data that is reproducible and comparable around the world. In addition, clear and concise guidelines for standard analytical protocols should be made available to researchers. In keeping with the theme of this special issue, the goals of this focal point review are to provide researchers with an overview of approaches to isolate and extract microplastics from different matrices, highlight associated methodological constraints and the necessary steps for conducting procedural controls and quality assurance. Simple samples, including water and sediments with low organic content, can be filtered and sieved. Stepwise procedures require density separation or digestion before filtration. Finally, complex matrices require more extensive steps with both digestion and density adjustments to assist plastic isolation. Implementing appropriate methods with a harmonized approach from sample collection to data analysis will allow comparisons across the research community.

A Horizon Scan of research priorities to inform policies aimed at reducing the harm of plastic pollution to biota

Plastic pollution in the oceans is a priority environmental issue. The recent increase in research on the topic, coupled with growing public awareness, has catalyzed policymakers around the world to identify and implement solutions that minimize the harm caused by plastic pollution. To aid and coordinate these efforts, we surveyed experts with scientific experience identified through their peer-reviewed publications. We asked experts about the most pressing research questions relating to how biota interact with plastic pollution that in turn can inform policy decisions and research agendas to best contribute to understanding and reducing the harm of plastic pollution to biota. We used a modified Horizon Scan method that first used a subgroup of experts to generate 46 research questions on aquatic biota and plastics, and then conducted an online survey of researchers globally to prioritize questions in terms of their importance to inform policy development. One hundred and fifteen experts from 29 countries ranked research questions in six themes. The questions were ranked by urgency, indicating which research should be addressed immediately, which can be addressed later, and which are of limited relevance to inform action on plastics as an environmental pollutant. We found that questions relating to the following four themes were the most commonly top-ranked research priorities: (i) sources, circulation and distribution of plastics, (ii) type of harm from plastics, (iii) detection of ingested plastics and the associated problems, and (iv) related economies and policy to ingested plastics. While there are many research questions on the topic of impacts of plastic pollution on biota that could be funded and investigated, our results focus collective priorities in terms of research that experts believe will inform effective policy and on-the-ground conservation.

Is It or Isn't It: The Importance of Visual Classification in Microplastic Characterization

Microplastics are a diverse category of pollutants, comprising a range of constituent polymers modified by varying quantities of additives and sorbed pollutants, and exhibiting a range of morphologies, sizes, and visual properties. This diversity, as well as their microscopic size range, presents numerous barriers to identification and enumeration. These issues are addressed with the application of physical and chemical analytical procedures; however, these present new problems associated with researcher training, facility availability and cost, especially for large-scale monitoring programs. Perhaps more importantly, the classifications and nomenclature used by individual researchers to describe microplastics remains inconsistent. In addition to reducing comparability between studies, this limits the conclusions that may be drawn regarding plastic sources and potential environmental impacts. Additionally, where particle morphology data is presented, it is often separate from information on polymer distribution. In establishing a more rigorous and standardized visual identification procedure, it is possible to improve the targeting of complex analytical techniques and improve the standards by which we monitor and record microplastic contamination. Here we present a simple and effective protocol to enable consistent visual processing of samples with an aim to contribute to a higher degree of standardization within the microplastic scientific community. This protocol will not eliminate the need for non-subjective methods to verify plastic objects, but it will standardize the criteria by which suspected plastic items are identified and reduce the costs associated with further analysis.

An interlaboratory comparison exercise for the determination of microplastics in standard sample bottles

An interlaboratory comparison exercise was conducted to assess the consistency of microplastic quantification across several laboratories. The test samples were prepared by mixing one liter seawater free of plastics, microplastics made from polypropylene, high- and low-density polyethylene, and artificial particles in two plastic bottles, and analyzed concurrently in 12 experienced laboratories around the world. The minimum requirements to quantify microplastics were examined by comparing actual numbers of microplastics in these sample bottles with numbers measured in each laboratory. The uncertainty was due to pervasive errors derived from inaccuracies in measuring sizes and/or misidentification of microplastics, including both false recognition and overlooking. The size distribution of microplastics should be smoothed using a running mean with a length of >0.5 mm to reduce uncertainty to less than ±20%. The number of microplastics <1 mm was underestimated by 20% even when using the best practice for measuring microplastics in laboratories.

Tools and constraints in monitoring interactions between marine litter and megafauna: Insights from case studies around the world

Adverse impacts of marine litter is documented on >1400 species, including marine megafauna (fish, birds, sea turtles and mammals). The primary impacts include ingestion and entanglement, and there is increasing concern about chemical contamination via ingestion. Numerous survey approaches and monitoring programs have been developed and implemented around the world. They may aim to provide data about parameters such as species distribution and interactions with anthropogenic activities. During the Sixth International Marine Debris Conference, a session was dedicated to the tools and constraints in monitoring interactions between litter and megafauna. In the present paper, we summarize 7 case studies which discuss entanglement and ingestion including macro- and micro-debris in several taxa and across multiple geographic regions. We then discusses the importance of tools and standardizing methods for assessment and management purposes, in the context of international environmental policies and marine litter strategies.

Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris

The accumulation of plastic litter in natural environments is a global issue. Concerns over potential negative impacts on the economy, wildlife, and human health provide strong incentives for improving the sustainable use of plastics. Despite the many voices raised on the issue, we lack a consensus on how to define and categorize plastic debris. This is evident for microplastics, where inconsistent size classes are used and where the materials to be included are under debate. While this is inherent in an emerging research field, an ambiguous terminology results in confusion and miscommunication that may compromise progress in research and mitigation measures. Therefore, we need to be explicit on what exactly we consider plastic debris. Thus, we critically discuss the advantages and disadvantages of a unified terminology, propose a definition and categorization framework, and highlight areas of uncertainty. Going beyond size classes, our framework includes physicochemical properties (polymer composition, solid state, solubility) as defining criteria and size, shape, color, and origin as classifiers for categorization. Acknowledging the rapid evolution of our knowledge on plastic pollution, our framework will promote consensus building within the scientific and regulatory community based on a solid scientific foundation.

Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris

The accumulation of plastic litter in natural environments is a global issue. Concerns over potential negative impacts on the economy, wildlife, and human health provide strong incentives for improving the sustainable use of plastics. Despite the many voices raised on the issue, we lack a consensus on how to define and categorize plastic debris. This is evident for microplastics, where inconsistent size classes are used and where the materials to be included are under debate. While this is inherent in an emerging research field, an ambiguous terminology results in confusion and miscommunication that may compromise progress in research and mitigation measures. Therefore, we need to be explicit on what exactly we consider plastic debris. Thus, we critically discuss the advantages and disadvantages of a unified terminology, propose a definition and categorization framework, and highlight areas of uncertainty. Going beyond size classes, our framework includes physicochemical properties (polymer composition, solid state, solubility) as defining criteria and size, shape, color, and origin as classifiers for categorization. Acknowledging the rapid evolution of our knowledge on plastic pollution, our framework will promote consensus building within the scientific and regulatory community based on a solid scientific foundation.

Using mussel as a global bioindicator of coastal microplastic pollution

The ubiquity and high bioavailability of microplastics have an unknown risk on the marine environment. Biomonitoring should be used to investigate biotic impacts of microplastic exposure. While many studies have used mussels as indicators for marine microplastic pollution, a robust and clear justification for their selection as indicator species is still lacking. Here, we review published literature from field investigations and laboratory experiments on microplastics in mussels and critically discuss the suitability and challenges of mussels as bioindicator for microplastic pollution. Mussels are suitable bioindicator for microplastic pollution because of their wide distribution, vital ecological niches, susceptibility to microplastic uptake and close connection with marine predators and human health. Field investigations highlight a wide occurrence of microplastics in mussels from all over the world, yet their abundance varies enormously. Problematically, these studies are not comparable due to the lack of a standardized approach, as well as temporal and spatial variability. Interestingly, microplastic abundance in field-collected mussels is closely related to human activity, and there is evidence for a positive and quantitative correlation between microplastics in mussels and surrounding waters. Laboratory studies collectively demonstrate that mussels may be good model organisms in revealing microplastic uptake, accumulation and toxicity. Consequently, we propose the use of mussels as target species to monitor microplastics and call for a uniform, efficient and economical approach that is suitable for a future large-scale monitoring program.

Microplastic Extraction from Marine Vertebrate Digestive Tracts, Regurgitates and Scats: A Protocol for Researchers from All Experience Levels

It is essential to provide a protocol for the separation and identification of microplastics in marine vertebrates (mammals, birds, turtles and fish) that is easy to follow and adaptable depending on research infrastructure. Digesting organic material is an effective way to analyze samples for microplastics. Presented here is an optimized protocol which uses potassium hydroxide (KOH) for processing samples of digestive tracts, scats and regurgitates. KOH is a cheap, effective and simple alkaline digestant that allows extraction of plastics from the sample matrix. Samples are first digested, then filtered before visual and chemical analysis of remaining particle. This allows size, shape, color and polymer of each particle to be ascertained. This protocol has been harmonized with other protocols for the collection of different samples (e.g., diet, parasites, other pathologies). The implementation of this protocol at different levels of economic and/or laboratory resources make information on microplastic incidence available to the entire research community.

Validation of a Method for Extracting Microplastics from Complex, Organic-Rich, Environmental Matrices

Complex and organic-rich solid substrates such as sludge and soil have been shown to be contaminated by microplastics; however, methods for extracting plastic particles have not yet been systemically tested or standardized. This study investigated four main protocols for the removal of organic material during analysis of microplastics from complex solid matrices: oxidation using H₂O₂, Fenton's reagent, and alkaline digestion with NaOH and KOH. Eight common polymer types were used to assess the influence of reagent exposure on particle integrity. Organic matter removal efficiencies were established for test sludge and soil samples. Fenton's reagent was identified as the optimum protocol. All other methods showed signs of particle degradation or resulted in an insufficient reduction in organic matter content. A further validation procedure revealed high microplastic extraction efficiencies for particles with different morphologies. This confirmed the suitability of Fenton's reagent for use in conjunction with density separation for extracting microplastics. This approach affords greater comparability with existing studies that utilize a density-based technique. Recommendations for further method optimization were also identified to improve the recovery of microplastic from complex, organic-rich environmental samples.

Incidence of marine debris in cetaceans stranded and bycaught in Ireland: Recent findings and a review of historical knowledge

Interactions between marine mammals and plastic debris have been the focus of studies for many years. Examples of interactions include entanglement in discarded fishing items or the presence of ingested debris in digestive tracts. Plastics, including microplastics, are a form of marine debris globally distributed in coastal areas, oceanic waters and deep seas. Cetaceans which strand along the coast present a unique opportunity to study interactions between animals with macro- and microplastics. A combination of novel techniques and a review of historical data was used to complete an extensive study of cetaceans interacting with marine debris within Irish waters. Of the 25 species of marine mammals reported in Irish waters, at least 19 species were reported stranded between 1990 and 2015 (n = 2934). Two hundred and forty-one of the stranded cetaceans presented signs of possible entanglement or interactions with fisheries. Of this number, 52.7% were positively identified as bycatch or as entangled in fisheries items, 26.6% were classified as mutilated and 20.7% could not be related to fisheries but showed signs of entanglement. In addition, 274 cetaceans were recorded as by-catch during observer programmes targeting albacore tuna. Post-mortem examinations were carried out on a total of 528 stranded and bycaught individuals and 45 (8.5%) had marine debris in their digestive tracts: 21 contained macrodebris, 21 contained microdebris and three had both macro- and microdebris. Forty percent of the ingested debris were fisheries related items. All 21 individuals investigated with the novel method for microplastics contained microplastics, composed of fibres (83.6%) and fragments (16.4%). Deep diving species presented more incidences of macrodebris ingestion but it was not possible to investigate this relationship to ecological habitat. More research on the plastic implications to higher trophic level organisms is required to understand the effects of these pollutants.

Impacts of changing ocean circulation on the distribution of marine microplastic litter

Marine plastic pollution is currently a major scientific focus, with attention paid to its distribution and impacts within ecosystems. With recent estimates indicating that the mass of plastic released to the marine environment may reach 250 million metric tons by 2025, the effects of plastic on our oceans are set to increase. Distribution of microplastics, those plastics measuring less than 5 mm, are of increasing concern because they represent an increasing proportion of marine litter and are known to interact with species in a range of marine habitats. The local abundance of microplastic is dependent on a complex interaction between the scale of local plastic sources and prevailing environmental conditions; as a result, microplastic distribution is highly heterogeneous. Circulation models have been used to predict plastic distribution; however, current models do not consider future variation in circulation patterns and weather systems caused by a changing climate. In this study, we discuss the potential impacts of global climate change on the abundance and distribution of marine plastic pollution. Integr Environ Assess Manag 2017;13:483-487. © 2017 SETAC.

Microplastic and macroplastic ingestion by a deep diving, oceanic cetacean: the True's beaked whale Mesoplodon mirus

When mammals strand, they present a unique opportunity to obtain insights into their ecology. In May 2013, three True's beaked whales (two adult females and a female calf) stranded on the north and west coasts of Ireland and the contents of their stomachs and intestines were analysed for anthropogenic debris. A method for identifying microplastics ingested by larger marine organisms was developed. Microplastics were identified throughout the digestive tract of the single whale that was examined for the presence of microplastics. The two adult females had macroplastic items in their stomachs. Food remains recovered from the adult whales consisted of mesopelagic fish (Benthosema glaciale, Nansenia spp., Chauliodius sloani) and cephalopods, although trophic transfer has been discussed, it was not possible to ascertain whether prey were the source of microplastics. This is the first study to directly identify microplastics <5 mm in a cetacean species.

Microplastic pollution in the Northeast Atlantic Ocean: validated and opportunistic sampling

Levels of marine debris, including microplastics, are largely un-documented in the Northeast Atlantic Ocean. Broad scale monitoring efforts are required to understand the distribution, abundance and ecological implications of microplastic pollution. A method of continuous sampling was developed to be conducted in conjunction with a wide range of vessel operations to maximise vessel time. Transects covering a total of 12,700 km were sampled through continuous monitoring of open ocean sub-surface water resulting in 470 samples. Items classified as potential plastics were identified in 94% of samples. A total of 2315 particles were identified, 89% were less than 5mm in length classifying them as microplastics. Average plastic abundance in the Northeast Atlantic was calculated as 2.46 particles m(-3). This is the first report to demonstrate the ubiquitous nature of microplastic pollution in the Northeast Atlantic Ocean and to present a potential method for standardised monitoring of microplastic pollution.

Occurrence of microplastics in the gastrointestinal tract of pelagic and demersal fish from the English Channel

Microplastics are present in marine habitats worldwide and laboratory studies show this material can be ingested, yet data on abundance in natural populations is limited. This study documents microplastics in 10 species of fish from the English Channel. 504 Fish were examined and plastics found in the gastrointestinal tracts of 36.5%. All five pelagic species and all five demersal species had ingested plastic. Of the 184 fish that had ingested plastic the average number of pieces per fish was 1.90±0.10. A total of 351 pieces of plastic were identified using FT-IR Spectroscopy; polyamide (35.6%) and the semi-synthetic cellulosic material, rayon (57.8%) were most common. There was no significant difference between the abundance of plastic ingested by pelagic and demersal fish. Hence, microplastic ingestion appears to be common, in relatively small quantities, across a range of fish species irrespective of feeding habitat. Further work is needed to establish the potential consequences.