Ductile keratin films from deep eutectic solvent-fractionated feathers

Feathers, an industrial by-product, are a valuable source of keratin that could be used, for example, in the preparation of films for biomedical and packaging applications. However, the utilisation of feather keratin requires scalable processes to convert feathers into a feasible keratin stream. This paper shows how deep eutectic solvent (DES) fractionated feathers could be converted into strong films. In the DES fractionation process, two keratin fractions with different molecular weights were obtained. The films made of the high molecular weight keratin fraction had better mechanical properties and stability against moisture than the films made of the low molecular weight keratin fraction. The strength properties were further improved by cross-linking the keratin with diglycidyl ether enabling the formation of a uniform keratin network, whereas glutaraldehyde did not show a clear cross-linking effect. These keratin films could be used, for example, in food packaging or medical applications such as wound care.

Morphological and Wettability Properties of Thin Coating Films Produced from Technical Lignins

Technical lignins are widely available as side streams from pulping and biorefining processes. The aromatic structure of such lignins could be exploited in coating formulations to provide antioxidant or UV-blocking functionalities to packaging films. In this study, six technical lignins sourced from different plant species by given isolation/modification methods were compared for their composition, molar mass, and functional groups. The lignins were then used to prepare thin spin-coated films from aqueous ammonia media. All the lignins formed ultrathin (<12 nm), smooth (roughness < 2 nm), and continuous films that fully covered the solid support. Most of the films contained nanometer-sized particles, while those from water-insoluble lignins also presented larger particulate features, which likely originated from macromolecular association during solvent evaporation. These latter films had water contact angles (WCAs) between 40 and 60°, corresponding to a surface energy of 42-48 mJ/m² (determined by Zisman plots). For comparison, the water wettability measured on lignin pellets obtained by mechanical compression tracked closely with the WCA obtained from the respective thin films. Considering the widely diverse chemical, molecular, and structural properties of the tested lignins, comprehensively documented here by using a battery of techniques, the solubility in water was found to be the most important and generic parameter to characterize the thin films. This points to the possibility of developing lignin coatings with predictable wetting behavior.

Green process to regenerate keratin from feathers with an aqueous deep eutectic solvent

In the present study, waste feathers were processed into uniform keratin feedstock using an aqueous, inexpensive and non-toxic deep eutectic solvent.

Keratin-reinforced cellulose filaments from ionic liquid solutions

Cellulose-based filaments produced with ionic liquid-based processes have high application potential in textiles and composites to replace cotton fibres.

Impact of hydrothermal pre-treatment to chemical composition, enzymatic digestibility and spatial distribution of cell wall polymers

The effect of hydrothermal pretreatment on chemical composition, microscopic structure and enzymatic digestibility of wheat straw was studied. Wheat straw was pretreated with increasing severity to obtain series of samples with altered chemistry and structure. The hydrothermal pretreatment caused solubilisation of arabinoxylan and phenolic acids and their dimers in a temperature dependent manner with minor effects on the cellulose and Klason lignin content. In the cell wall level, the pretreatment intensified staining of cellulose and relocalised xylan in the cell walls. The distribution, properties and content of the cell wall phenolic compounds was altered as observed with phloroglucinol and autofluorescence imaging. In the enzymatic hydrolysis, the highest yields were obtained from the samples with a low xylan and diferulate content. On the cell wall structural level, the sample with the highest digestibility was observed to have intensified cellulose staining, possibly reflecting the increased accessibility of cellulose.

Use of total internal reflection Raman (TIR) and attenuated total reflection infrared (ATR-IR) spectroscopy to analyze component separation in thin offset ink films after setting on coated paper surfaces

The interactive behavior of ink constituents with porous substrates during and after the offset print process has an important effect on the quality of printed products. To help elucidate the distribution of ink components between the retained ink layer and the substrate, a variety of spectroscopic and microscopic analysis techniques have been developed. This paper describes for the first time the use of total internal reflection (TIR) Raman spectroscopy to analyze the penetration behavior of separated offset ink components (linseed oil, solid color pigment) in coated papers providing chemically intrinsic information rapidly, nondestructively, and with minimal sample preparation. In addition, the already widely applied technique of attenuated total reflection infrared spectroscopy (ATR-IR) was evaluated in parallel and compared. The results of the ATR-IR Raman clearly revealed an improvement in uppermost depth resolution compared with values previously published from other nondestructive techniques, and the method is shown to be capable of providing new knowledge of the setting of thin (0.25-2 μm) offset ink films, allowing the spreading and the penetration behavior on physically different paper coating surfaces to be studied.

Effect of supervised and home exercise training on bone mineral density among breast cancer patients. A 12-month randomised controlled trial

The ability of combined step aerobic- and circuit-training to prevent bone loss after breast cancer treatments was related to skeletal site and patients' menopausal status. Among premenopausal breast cancer survivors, a 12-month exercise intervention completely prevented bone loss at the femoral neck, whereas no exercise effect was seen at lumbar spine or at neither site in postmenopausal women.

INTRODUCTION

The primary objective of this randomised clinical trial was to determine the preventive effect of supervised weight-bearing jumping exercises and circuit training on bone loss among breast cancer patients.

METHODS

Of 573 breast cancer survivors aged 35-68 years randomly allocated into exercise or control group after adjuvant treatments, 498 (87%) were included in the final analysis. The 12-month exercise intervention comprised weekly supervised step aerobic- and circuit-exercises and similar home training. Bone mineral density (BMD) at lumbar spine and femoral neck were measured by dual-energy X-ray absorptiometry. Physical performance was assessed by 2-km walking and figure-8 running tests, and the amount of physical activity was estimated in metabolic equivalent-hours/week.

RESULTS

In premenopausal women, bone loss at the femoral neck was prevented by exercise, the mean BMD changes being -0.2% among the trainees vs. -1.4% among the controls (p = 0.01). Lumbar bone loss could not be prevented (-1.9% vs. -2.2%). In postmenopausal women, no significant exercise-effect on BMD was found either at the lumbar spine (-1.6% vs. -2.1%) or femoral neck (-1.1% vs. -1.1%).

CONCLUSIONS

This 12-month aerobic jumping and circuit training intervention completely prevented femoral neck bone loss in premenopausal breast cancer patients, whereas no effect on BMD was seen in postmenopausal women.

Combination of alkaline and enzymatic treatments as a process for upgrading sisal paper-grade pulp to dissolving-grade pulp

A sequence of treatments consisting of an initial xylanase treatment followed by cold alkaline extraction and a final endoglucanase treatment was investigated as a process for upgrading non-wood paper-grade pulps to dissolving-grade pulps for viscose production. Five commercial dried bleached non-wood soda/AQ paper pulps, from flax, hemp, sisal, abaca, and jute, were studied for this purpose. Commercial dried bleached eucalyptus dissolving pulp was used as reference sample. Sisal pulp showed the highest improvement in Fock's reactivity, reaching levels nearly as high or even higher than that of eucalyptus dissolving pulp (65%), and a low hemicellulose content (3-4%) when was subjected to this sequence of treatments. The viscosity, however, decreased considerably. A uniform and narrow molecular weight distribution was observed by size exclusion chromatography. (13)C nuclear magnetic resonance spectroscopy and Raman microspectroscopy revealed that the cellulose structure consisted of cellulose I.

Quality of life and physical performance and activity of breast cancer patients after adjuvant treatments

OBJECTIVE

The study aimed at investigating the quality of life (QoL) and physical performance and activity, and their interrelations, in Finnish female breast cancer patients shortly after adjuvant treatments.

METHODS

A total of 537 disease-free breast cancer survivors aged 35-68 years were surveyed at the beginning of a one year randomized exercise intervention. The patients were interviewed using EORTC QLQ-C30, FACIT-F, RBDI, and WHQ (for vasomotor symptoms) questionnaires. Physical performance was tested by a 2 km walking test. Physical activity was measured by a questionnaire and a prospective two-week diary. Multivariate analysis was used to study the factors associated with QoL.

RESULTS

About 26% of the patients were rated as depressed, 20.4% as fatigued, and 82% suffered from menopausal symptoms. The global QoL was lower than in general population (69.4 vs 74.7, p<0.001). About 62% of the walking test results were below the population average. Fatigue (p<0.001), depression (p<0.001), body mass index (p = 0.016) and comorbidity (p = 0.032) impaired, and physical activity (p = 0.003) improved QoL. Physical activity level correlated positively to physical performance (r = -0.274, p<0.0001).

CONCLUSIONS

The QoL of the patients shortly after adjuvant treatments was impaired and the physical performance poor as compared to general population. In particular, depression and fatigue were related to impaired QoL. Physical performance and activity level were the only factors that correlated positively to QoL. Thus, physical exercise could be useful in rehabilitation of cancer survivors, especially for depressed and fatigued patients.

Synthesis and characterization of the hexenuronic acid model methyl 4-deoxy-β-l-threo-hex-4-enopyranosiduronic acid

A facile synthetic scheme for the preparation of methyl 4-deoxy-beta-L-threo-hex-4-enopyranosiduronic acid utilizing the commercially available methyl alpha-D-galactopyranoside as starting material has been developed. The synthesis sequence comprises six high yielding reaction steps: TEMPO oxidation, acetylation, methanolysis of the lactone, acetylation, beta-elimination, and final removal of the protecting groups. Only one column chromatographic purification is needed throughout the whole sequence. The overall yield is 60%. The final product has been characterized by NMR, Raman, UVRR, FTIR, and HRMS.

Cu(II) complex formation with xylitol in alkaline solutions

The formation of four Cu(II)-xylitol complexes was observed in aqueous alkaline solutions (11.0< or =pH< or =14.0, I=1.0, 20 degrees C) by means of direct current polarography and VIS spectrophotometry. Mononuclear hydroxy complexes, CuXyl(OH)- (log beta=17.7 +/- 0.5), CuXyl(OH)2(2-) (log beta=20.2 +/- 0.3) and CuXyl2(OH)2(4-) (log beta=22.4 +/- 0.3), are formed at high ligand-to-metal ratios (L:M> or =10), whereas dinuclear complex Cu2Xyl (log beta=29.2 +/- 0.3) is the predominant species at low ligand-to-metal ratio (L:M=0.5). Diffusion coefficients and molar absorptivities of the complex species were determined. pH variable 13C NMR suggested that pKa values of xylitol are rather similar and equal to 13.8 +/- 0.2, 13.9 +/- 0.1 and 13.9 +/- 0.2 for OH-groups adjacent to (C-1,C-5), (C-3) and (C-2,C-4) carbon atoms, respectively.

Ultra violet resonance Raman spectroscopy in lignin analysis: determination of characteristic vibrations of p-hydroxyphenyl, guaiacyl, and syringyl lignin structures

Raman spectroscopy of wood and lignin samples is preferably carried out in the near-infrared region because lignin produces an intense laser-induced fluorescence background at visible excitation wavelengths. However, excitation of aromatic and conjugated lignin structures with deep ultra violet (UV) light gives resonance-enhanced Raman signals while the overlapping fluorescence is eliminated. In this study, ultra violet resonance Raman (UVRR) spectroscopy was used to define characteristic vibration bands of model compounds of p-hydroxyphenyl, guaiacyl, and syringyl lignin structures at three excitation wavelengths (229, 244, and 257 nm). The intensities of each band, relative to the intensity of the aromatic vibration band at 1600 cm-1, were defined and the most suitable excitation wavelength was suggested for each structure. p-Hydroxyphenyl structures showed intensive characteristic bands at 1217-1214 and 1179-1167 cm-1 with excitation at 244 nm, whereas the bands of guaiacyl structures were more intensive with 257 nm excitation. Most intensive characteristic bands of guaiacyl structures were found at 1289-1279, 1187-1185, 1158-1155, and 791-704 cm-1. Syringyl structures had almost identical spectra with 244 and 257 nm excitations with characteristic bands at 1514-1506, 1333-1330, and 981-962 cm-1. The characteristic bands of the three structural units were also found from the compression wood, softwood, and hardwood samples, indicating that UVRR spectroscopy can be applied for the determination of chemical structures of lignin.

Synchronization of endogenous and exogenous FSH stimuli in controlled ovarian hyperstimulation (COH)

We have previously observed that exogenous oestradiol can delay the intercycle increase in plasma follicle stimulating hormone (FSH). The increase in plasma FSH that follows discontinuation of exogenous oestradiol peaks after 3 days. We have now studied the possibility of using exogenous oestradiol to synchronize the increase in endogenous FSH with the onset of human menopausal gonadotrophin (HMG) treatment in controlled ovarian hyperstimulation (COH). A total of 30 women aged 35.1+/-6.3 years (mean+/-SD) undergoing ovarian stimulation received 2 mg of oestradiol valerate twice daily starting on day 25 of the previous menstrual cycle until the first Tuesday following menses. Ovarian stimulation was initiated 3 days later. On the last day of oestradiol treatment, plasma oestradiol, FSH and luteinizing hormone (LH) (mean+/-SEM) were 566+/-53 (pmol/l), 3.8+/-0.4 (IU/l) and 5.5+/-0.8 (IU/l) respectively. After 3 days, the FSH and LH (mean+/-SEM) had increased to 6.7+/-0.7 and 6.9+/-0.7 (IU/l) respectively while oestradiol decreased to 251+/-29 (pmol/l). The mean number (+/-SEM) of HMG ampoules used was 25.1+/-2.7 and treatment lasted 11.3+/-0.9 days. Five women became pregnant for a pregnancy rate (ongoing) of 19 (15)%. If all women aged >40 years (six women who did not become pregnant) were excluded from analysis the pregnancy rate (ongoing) was 24 (19%). These results indicate that exogenous oestradiol can safely be used for the synchronization of endogenous and exogenous FSH stimuli in COH. This approach provides the practical advantage of permitting an advanced timing of the onset of COH treatments when gonadotrophin-releasing hormone (GnRH) agonists are not used, which improves treatment convenience for patients and team members alike. Further development of this model may enable control of the onset of natural cycles which may find practical applications for timing assisted reproductive techniques (intrauterine insemination or in-vitro fertilization) in the natural cycle.

The first uterine pass effect

The endometrial effects of vaginal progesterone have been found to be unexpectedly reliable. This has led us to suspect that a local direct vagina-to-uterus transport or first uterine pass effect was the basis of the uterine targeting of vaginal progesterone. After vaginal administration of progesterone, uterine tissue concentration has been found to exceed by more than 10-fold the levels achieved by systemic administration, despite plasma levels in the latter case that were more than seven times higher. Similar differences in systemic-to-uterine tissue level ratios have been observed between oral and vaginal administration of danazol. Originally seen as a pharmacological advantage permitting the uterine targeting of vaginally administered substances, it is possible that the first uterine pass effect plays a physiological role in the control of uterine contractile activity through the prostaglandins contained in the semen.