Insight into the structural, optoelectronic, and thermoelectric properties of Fe2HfSi Heusler by DFT investigation

At high pressure, the pressure dependencies of the structural, electronic, optical, and thermoelectric properties of Fe₂HfSi Heusler were calculated using the FP-LAPW method within the framework of the density functional theory. The calculations were carried out using the modified Becke-Johnson (mBJ) scheme. Our calculations showed that the Born mechanical stability criteria confirmed the mechanical stability in the cubic phase. Further, through Poisson and Pugh's ratios critical limits, the findings of the ductile strength were computed. At a pressure of 0 GPa, the indirect nature of the material may be deduced from the electronic band structures of Fe₂HfSi as well as the estimations for its density of states. Under pressure, the real and imaginary dielectric function responses, optical conductivity, absorption coefficient, energy loss function, refractive index, reflectivity, and extinction coefficient were computed in the 0-12 eV range. Using semi-classical Boltzmann theory, a thermal response is also studied. As the pressure rises, the Seebeck coefficient decreases, while the electrical conductivity rises. The figure of merit (ZT) and Seebeck coefficients were determined at temperatures of 300 K, 600 K, 900 K, and 1200 K in order to better understand the thermoelectric properties of a material at these different temperatures. Despite the fact that the ideal Seebeck coefficient for Fe₂HfSi was discovered at 300 K and was determined to be superior to that reported previously. Materials with a thermoelectric reaction has been shown to be suitable for reusing waste heat in systems. As a result, Fe₂HfSi functional material may aid in the development of new energy harvesting and optoelectronic technologies.

Correction: Insight into the exemplary structural, elastic, electronic and optical nature of GaBeCl3 and InBeCl3: a DFT study

Correction for ‘Insight into the exemplary structural, elastic, electronic and optical nature of GaBeCl₃ and InBeCl₃: a DFT study’ by Saima Ahmad Shah et al., RSC Adv., 2022, 12, 8172–8177, DOI: 10.1039/D2RA00943A.

Immunoadjuvant and Humoral Immune Responses of Garlic (Allium sativum L.) Lectins upon Systemic and Mucosal Administration in BALB/c Mice

Dietary food components have the ability to affect immune function; following absorption, specifically orally ingested dietary food containing lectins can systemically modulate the immune cells and affect the response to self- and co-administered food antigens. The mannose-binding lectins from garlic (Allium sativum agglutinins; ASAs) were identified as immunodulatory proteins in vitro. The objective of the present study was to assess the immunogenicity and adjuvanticity of garlic agglutinins and to evaluate whether they have adjuvant properties in vivo for a weak antigen ovalbumin (OVA). Garlic lectins (ASA I and ASA II) were administered by intranasal (50 days duration) and intradermal (14 days duration) routes, and the anti-lectin and anti-OVA immune (IgG) responses in the control and test groups of the BALB/c mice were assessed for humoral immunogenicity. Lectins, co-administered with OVA, were examined for lectin-induced anti-OVA IgG response to assess their adjuvant properties. The splenic and thymic indices were evaluated as a measure of immunomodulatory functions. Intradermal administration of ASA I and ASA II had showed a four-fold and two-fold increase in anti-lectin IgG response, respectively, vs. the control on day 14. In the intranasal route, the increases were 3-fold and 2.4-fold for ASA I and ASA II, respectively, on day 50. No decrease in the body weights of animals was noticed; the increases in the spleen and thymus weights, as well as their indices, were significant in the lectin groups. In the adjuvanticity study by intranasal administration, ASA I co-administered with ovalbumin (OVA) induced a remarkable increase in anti-OVA IgG response (~six-fold; p < 0.001) compared to the control, and ASA II induced a four-fold increase vs. the control on day 50. The results indicated that ASA was a potent immunogen which induced mucosal immunogenicity to the antigens that were administered intranasally in BALB/c mice. The observations made of the in vivo study indicate that ASA I has the potential use as an oral and mucosal adjuvant to deliver candidate weak antigens. Further clinical studies in humans are required to confirm its applicability.

Insight into the exemplary structural, elastic, electronic and optical nature of GaBeCl3 and InBeCl3: a DFT study

In the scheme of density functional theory (DFT), Structural, elastic, electronic, and optical properties calculations of GaBeCl3 and InBeCl3 are carried out using Tran–Blaha modified Becke–Johnson exchange potential approximation (TB-mBJ) installed in Wein2k software.

De-novo Domestication for Improving Salt Tolerance in Crops

Global agriculture production is under serious threat from rapidly increasing population and adverse climate changes. Food security is currently a huge challenge to feed 10 billion people by 2050. Crop domestication through conventional approaches is not good enough to meet the food demands and unable to fast-track the crop yields. Also, intensive breeding and rigorous selection of superior traits causes genetic erosion and eliminates stress-responsive genes, which makes crops more prone to abiotic stresses. Salt stress is one of the most prevailing abiotic stresses that poses severe damages to crop yield around the globe. Recent innovations in state-of-the-art genomics and transcriptomics technologies have paved the way to develop salinity tolerant crops. De novo domestication is one of the promising strategies to produce superior new crop genotypes through exploiting the genetic diversity of crop wild relatives (CWRs). Next-generation sequencing (NGS) technologies open new avenues to identifying the unique salt-tolerant genes from the CWRs. It has also led to the assembly of highly annotated crop pan-genomes to snapshot the full landscape of genetic diversity and recapture the huge gene repertoire of a species. The identification of novel genes alongside the emergence of cutting-edge genome editing tools for targeted manipulation renders de novo domestication a way forward for developing salt-tolerance crops. However, some risk associated with gene-edited crops causes hurdles for its adoption worldwide. Halophytes-led breeding for salinity tolerance provides an alternative strategy to identify extremely salt tolerant varieties that can be used to develop new crops to mitigate salinity stress.

Morphological Characterization, Variability and Diversity among Vegetable Soybean (Glycine max L.) Genotypes

Vegetable soybean production is dependent on the development of vegetable type varieties that would be achieved by the use of germplasm to evolve new agronomically superior yielding vegetable type with beneficial biochemical traits. This can be accomplished by a better understanding of genetics, which is why the research was conducted to reveal the quantitative genetics of vegetable soybean genotypes. Genetic variability of main morphological traits in vegetable soybean genotypes and their divergence was estimated, as a result of the magnitude of genotypic variation (GV), and phenotypic variation (PV) of traits varied among the genotypes. All traits showed high heritability (h2) associated with high genetic advance percentage mean (GAM). Therefore, these variable traits are potential for genetic improvement of vegetable type soybean. Genetic diversity is the prime need for breeding, and the magnitude of genetic diversity values were maximized among specific genotypes. Eight clusters were found for all genotypes; cluster VIII and cluster I were considered to have the most diversity. Cluster VIII consisted of two genotypes (GM-6 and GM-27), based on the mean outcomes of the high yield attributing traits. Hence, these two (GM-6, GM-27) genotypes can be advanced for commercial cultivation; furthermore, other genotypes can be used as source of breeding lines for genetic improvement of vegetable soybean.

Assessing the Impact of Higher Levels of CO2 and Temperature and Their Interactions on Tomato (Solanumlycopersicum L.)

Climate change has increasing effects on horticultural crops. To investigate the impact of CO2 and temperature at elevated levels on tomato production and quality of fruits an experiment was conducted by growing plants in open top chambers. The tomato plants were raised at EC550 (elevated CO2 at 550 ppm) and EC700 (elevated CO2 at 700 ppm) alone and in combination with elevated temperature (ET) + 2 °C in the open top chambers. These elevate CO2 and temperature treatment effects were compared with plants grown under ambient conditions. Outcome of the experiment indicated that growth parameters namely plant stature in terms of height (152.20 cm), leaf number (158.67), canopy spread (6127.70 cm2), leaf area (9110.68 cm2) and total dry matter (223.0 g/plant) were found to be high at EC700 compared to plants grown at ambient conditions in open field. The plants grown at EC700 also exhibited significantly higher number of flowers (273.80) and fruits (261.13), more fruit weight (90.46 g) and yield (5.09 kg plant-1) compared to plants grown at ambient conditions in open field. The percent increase in fruit yield due to EC varied from 18.37 (EC550) to 21.41 (EC700) percent respectively compared to open field and the ET by 2 °C has reduced the fruit yield by 20.01 percent. Quality traits like Total Soluble Solids (3.67 °Brix), reducing sugars (2.48%), total sugars (4.41%) and ascorbic acid (18.18 mg/100 g) were found maximum in EC700 treated tomato than other elevated conditions. Keeping quality was also improved in tomato cultivated under EC700 (25.60 days) than the open field (17.80 days). These findings reveal that CO2 at 700 ppm would be a better option to improve both quantitative as well as qualitative traits in tomato. Among the combinations, EC550 + 2 °C proved better than EC700 + 2 °C with respect to yield as well as for the quality traits. The tomato grown under ET (+2 °C) alone recorded lowest growth and yield attributes compared to open field conditions and rest of the treatments. The positive influence of EC700 is negated to an extent of 14.35 % when the EC700 combined with elevated temperature of + 2 °C. The present study clearly demonstrates that the climate change in terms of increased temperature and CO2 will have a positive effect on tomato by way of increase in production and quality of fruits. Meanwhile the increase in EC beyond 700 ppm along with ET may reduce the positive effects on yield and quality of tomato.

Nonthermal control of Escherichia coli growth using extremely low frequency electromagnetic (ELF-EM) waves

BACKGROUND

Escherichia coli (E. coli) bacteria normally live in the intestines of people and animals. Most E. coli are harmless and the treatment of the infection could be achieved by using antibiotics, however the effectiveness is still debatable and needs more investigation.

OBJECTIVE

Researching the inhibition resonance frequency of square amplitude modulating waves (QAMW) that can inhibit the growth activity of E. coli and its ability to make division.

METHODS

A range of different extremely low frequencies of square amplitude modulated waves (QAMW) from 0.1 to 1.0 Hz from two generators with a constant carrier frequency of 10 MHz, amplitude of 10 Vpp, modulating depth ± 2 Vpp and constant field strength 200 V/m were used to treat E. coli cells at 37 °C.

RESULTS

The exposure of E. coli to 0.3 Hz QAMW for 90 min was the most inhibited frequency where the bacterial growth inhibited by 42.3%. Furthermore, a significant increase in antibiotic susceptibility to protein and cell wall inhibitors was investigated. Also, results of the chromosomal DNA sequences, dielectric relaxation and TEM indicated highly significant molecular and morphological changes after the exposure.

CONCLUSIONS

We concluded that the exposure of E. coli to QAMW at the inhibiting frequency interfered with the bioelectric signals generated from the bacteria during the cell division and changed the cellular activity and DNA sequences, and these changes lead to a significant inhibition of the bacterial growth. This is a new promising technique that aids to avoid the repetitive use of antibiotics against the bacterial pathogens.

Molecular characterization of the pathogenic plant fungus Rhizoctonia solani (Ceratobasidiaceae) isolated from Egypt based on protein and PCR-RAPD profiles

Twenty-one isolates of Rhizoctonia solani were categorized into three anastomosis groups consisting of AG-4-HG-I (eight isolates), AG-2-2 (nine isolates) and AG-5 (four isolates). Their pathogenic capacities were tested on cotton cultivar Giza 86. Pre-emergence damping-off varied in response to the different isolates; however, the differences were not significant. Soluble proteins of the fungal isolates were electrophoresed using SDS-PAGE and gel electrophoreses. A dendrogram of the protein banding patterns by the UPGMA of arithmetic means placed the fungal isolates into distinct groups. There was no evidence of a relationship between protein dendrogram, anastomosis grouping or level of virulence or geographic origin. The dendrogram generated from these isolates based on PCR analysis with five RAPD-PCR primers showed high levels of genetic similarity among the isolates from the same geographical locations. There was partially relationship between the genetic similarity and AGs or level of virulence or geographic origin based on RAPD dendrogram. These results demonstrate that RAPD technique is a useful tool in determining the genetic characterization among isolates of R. solani.

Molecular mapping of the novel powdery mildew resistance gene Pm36 introgressed from Triticum turgidum var. dicoccoides in durum wheat

Powdery mildew, caused by Blumeria graminis f.sp. tritici, is one of the most important wheat diseases in many regions of the world. Triticum turgidum var. dicoccoides (2n=4x=AABB), the progenitor of cultivated wheats, shows particular promises as a donor of useful genetic variation for several traits, including disease resistances. The wild emmer accession MG29896, resistant to powdery mildew, was backcrossed to the susceptible durum wheat cultivar Latino, and a set of backcross inbred lines (BC(5)F(5)) was produced. Genetic analysis of F(3) populations from two resistant introgression lines (5BIL-29 x Latino and 5BIL-42 x Latino) indicated that the powdery mildew resistance is controlled by a single dominant gene. Molecular markers and the bulked segregant analysis were used to characterize and map the powdery mildew resistance. Five AFLP markers (XP43M32((250)), XP46M31((410)), XP41M37((100)), XP41M39((250)), XP39M32((120))), three genomic SSR markers (Xcfd07, Xwmc75, Xgwm408) and one EST-derived SSR marker (BJ261635) were found to be linked to the resistance gene in 5BIL-29 and only the BJ261635 marker in 5BIL-42. By means of Chinese Spring nullisomic-tetrasomic, ditelosomic and deletion lines, the polymorphic markers and the resistance gene were assigned to chromosome bin 5BL6-0.29-0.76. These results indicated that the two lines had the same resistance gene and that the introgressed dicoccoides chromosome segment was longer (35.5 cM) in 5BIL-29 than that introgressed in 5BIL-42 (less than 1.5 cM). As no powdery mildew resistance gene has been reported on chromosome arm 5BL, the novel resistance gene derived from var. dicoccoides was designated Pm36. The 244 bp allele of BJ261635 in 5BIL-42 can be used for marker-assisted selection during the wheat resistance breeding process for facilitating gene pyramiding.