Preliminary evaluation of fish cartilage as a promising biomaterial in cartilage tissue engineering

Fish cartilage is known as a valuable source of natural biomaterials due to its unique composition and properties. It contains a variety of bioactive components that contribute to its potential applications in different domains such as tissue engineering. The present work aimed to consider the properties of backbone cartilage from fish with a cartilaginous skeleton, including elasmobranch (reticulate whipray: Himantura uarnak and milk shark: Rhizoprionodon acutus) and sturgeon (beluga: Huso huso). The histomorphometric findings showed that the number of chondrocytes was significantly higher in reticulate whipray and milk shark compared to beluga (p < 0.05). The highest GAGs content was recorded in reticulate whipray cartilage compared to the other two species (p < 0.05). The cartilage from reticulate whipray and beluga showed higher collagen content than milk shark cartilage (p < 0.05), and the immunohistochemical assay for type II collagen (Col II) showed higher amounts of this component in reticulate whipray compared to the other two species. Young's modulus of the cartilage from reticulate whipray was significantly higher than that of milk shark and beluga (p < 0.05), while no significant difference was recorded between Young's modulus of the cartilage from milk shark and beluga. The gene expression of ACAN, Col II, and Sox9 showed that the cartilage-ECM from three species was able to induce chondrocyte differentiation from human adipose tissue-derived stem cells (hASCs). From these results, it can be concluded that the cartilage from three species, especially reticulate whipray, enjoys the appropriate biological properties and provides a basis for promoting its applications in the field of cartilage tissue engineering.

Cellulose nanocrystals-reinforced dual crosslinked double network GelMA/hyaluronic acid injectable nanocomposite cryogels with improved mechanical properties for cartilage tissue regeneration

Improvement of mechanical properties of injectable tissue engineering scaffolds is a current challenge. The objective of the current study is to produce a highly porous injectable scaffold with improved mechanical properties. For this aim, cellulose nanocrystals-reinforced dual crosslinked porous nanocomposite cryogels were prepared using chemically crosslinked methacrylated gelatin (GelMA) and ionically crosslinked hyaluronic acid (HA) through the cryogelation process. The resulting nanocomposites showed highly porous structures with interconnected porosity (>90%) and mean pore size in the range of 130-296 μm. The prepared nanocomposite containing 3%w/v of GelMA, 20 w/w% of HA, and 1%w/v of CNC showed the highest Young's modulus (10 kPa) and excellent reversibility after 90% compression and could regain its initial shape after injection by a 16-gauge needle in the aqueous media. The in vitro results demonstrated acceptable viability (>90%) and migration of the human chondrocyte cell line (C28/I2), and chondrogenic differentiation of human adipose stem cells. A two-month in vivo assay on a rabbit's ear model confirmed that the regeneration potential of the prepared cryogel is comparable to the natural autologous cartilage graft, suggesting it is a promising alternative for autografts in the treatment of cartilage defects.

Antibacterial aligned nanofibrous chitosan/PVA patch for repairing chronic tympanic membrane perforations

Chronic tympanic membrane (TM) perforation is a consequence of trauma or chronic otitis media, and these chronic TM perforations often lead to conduction hearing loss. This study focuses on the development of a patch using a combination of chitosan (CS) and polyvinyl alcohol (PVA) as graft material for repairing chronic tympanic membrane (TM) perforations. Aligned nanofibers were created using a specially designed collector (SDC) through the electrospinning method. The scanning electron microscopy (SEM) analysis revealed that the CS/PVA ratio of (15:85) resulted in uniform and bead-free nanofibers. The aligned nanofibers had a diameter of 131.11 ± 28 nm, indicating that the influence of the electrostatic field introduced by the SDC affected not only the nanofiber alignment but also the nanofiber diameter. The nanofiber angles demonstrated effective alignment. This patch is infused with thyme essential oil (TEO) for antibacterial properties. The results showed that its antibacterial property for Pseudomonas aeruginosa bacteria was enhanced in such a way that the diameter of the antibacterial halo increased from zero to 25 mm. Cell viability assays showed >80 % viability. A preclinical case study on six patients demonstrated the biocompatibility and promising potential of the fabricated patch for eardrum repair.

Bioinspired scaffolds based on aligned polyurethane nanofibers mimic tendon and ligament fascicles

Topographical factors of scaffolds play an important role in regulating cell functions. Although the effects of alignment topography and three-dimensional (3D) configuration of nanofibers as well as surface stiffness on cell behavior have been investigated, there are relatively few reports that attempt to understand the relationship between synergistic effects of these parameters and cell responses. Herein, the influence of biophysical and biomechanical cues of electrospun polyurethane (PU) scaffolds on mesenchymal stem cells (MSCs) activities was evaluated. To this aim, multiscale bundles were developed by rolling up the aligned electrospun mats mimicking the fascicles of tendons/ligaments and other similar tissues. Compared to mats, the 3D bundles not only maintained the desirable topographical features (i.e., fiber diameter, fiber orientation, and pore size), but also boosted tensile strength (∼40 MPa), tensile strain (∼260%), and surface stiffness (∼1.75 MPa). Alignment topography of nanofibers noticeably dictated cell elongation and a uniaxial orientation, resulting in tenogenic commitment of MSCs. MSCs seeded on the bundles expressed higher levels of tenogenic markers compared to mats. Moreover, the biomimetic bundle scaffolds improved synthesis of extracellular matrix components compared to mats. These results suggest that biophysical and biomechanical cues modulate cell-scaffold interactions, providing new insights into hierarchical scaffold design for further studies.

Targeted Delivery of Pennyroyal via Methotrexate Functionalized PEGylated Nanostructured Lipid Carriers into Breast Cancer Cells; A Multiple Pathways Apoptosis Activator

Purpose

Pennyroyal is a species of the Lamiaceae family with potent anti-cancer and antioxidant properties. Combining this antioxidant with chemotherapeutic agents enhances the effectiveness of these agents by inducing more apoptosis in cancerous cells.

Methods

Here, methotrexate (MTX) combined with pennyroyal oil based on PEGylated nanostructured lipid carriers (NLCs) was assessed. These nanoparticles were physiochemically characterized, and their anti-cancer effects and targeting efficiency were investigated on the folate receptor-positive human breast cancer cell line (MCF-7) and negative human alveolar basal epithelial cells (A549).

Results

Results showed a mean size of 97.4 ± 12.1 nm for non-targeted PEGylated NLCs and 220.4 ± 11.4 nm for targeted PEGylated NLCs, with an almost small size distribution assessed by TEM imaging. Furthermore, in vitro molecular anti-cancer activity investigations showed that pennyroyal-NLCs and pennyroyal-NLCs/MTX activate the apoptosis and autophagy pathway by changing their related mRNA expression levels. Furthermore, in vitro cellular studies showed that these changes in the level of gene expression could lead to a rise in apoptosis rate from 15.6 ± 8.1 to 25.0 ± 3.2 (P<0.05) for the MCF-7 cells treated with pennyroyal-NLCs and pennyroyal-NLCs/MTX, respectively. Autophagy and reactive oxygen species (ROS) cellular evaluation indicated that treating the cells with pennyroyal-NLCs and pennyroyal-NLCs/MTX could significantly increase their intensity in these cells.

Conclusion

Our results present a new NLCs-based approach to enhance the delivery of pennyroyal and MTX to cancerous breast tissues.

Capsaicin-loaded alginate nanoparticles embedded polycaprolactone-chitosan nanofibers as a controlled drug delivery nanoplatform for anticancer activity

Nanocarrier-based drug delivery systems have been designed into various structures that can effectively prevent cancer progression and improve the therapeutic cancer index. However, most of these delivery systems are designed to be simple nanostructures with several limitations, including low stability and burst drug release features. A nano-in-nano delivery technique is explored to address the aforementioned concerns. Accordingly, this study investigated the release behavior of a novel nanoparticles-in-nanofibers delivery system composed of capsaicin-loaded alginate nanoparticles embedded in polycaprolactone-chitosan nanofiber mats. First, alginate nanoparticles were prepared with different concentrations of cationic gemini surfactant and using nanoemulsion templates. The optimized formulation of alginate nanoparticles was utilized for loading capsaicin and exhibited a diameter of 19.42 ± 1.8 nm and encapsulation efficiency of 98.7 % ± 0.6 %. Likewise, blend polycaprolactone-chitosan nanofibers were prepared with different blend ratios of their solutions (i.e., 100:0, 80:20, 60:40) by electrospinning method. After the characterization of electrospun mats, the optimal nanofibers were employed for embedding capsaicin-loaded alginate nanoparticles. Our findings revealed that embedding capsaicin-loaded alginate nanoparticles in polycaprolactone-chitosan nanofibers, prolonged capsaicin release from 120 h to more than 500 h. Furthermore, the results of in vitro analysis demonstrated that the designed nanoplatform could effectively inhibit the proliferation of MCF-7 human breast cells while being nontoxic to human dermal fibroblasts (HDF). Collectively, the prepared nanocomposite drug delivery platform might be promising for the long-term and controlled release of capsaicin for the prevention and treatment of cancer.

Physicochemical and Biochemical Properties of Trypsin-like Enzyme from Two Sturgeon Species

This work aimed to determine the physicochemical and biochemical properties of trypsin from beluga Huso huso and sevruga Acipenser stellatus, two highly valuable sturgeon species. According to the results obtained from the methods of casein-zymogram and inhibitory activity staining, the molecular weight of trypsin for sevruga and beluga was 27.5 and 29.5 kDa, respectively. Optimum pH and temperature values for both trypsins were recorded at 8.5 and 55 °C by BAPNA (a specific substrate), respectively. The stability of both trypsins was well-preserved at pH values from 6.0 to 11.0 and temperatures up to 50 °C. TLCK and SBTI, two specific trypsin inhibitors, showed a significant inhibitory effect on the enzymatic activity of both trypsins (p < 0.05). The enzyme activity was significantly increased in the presence of Ca⁺² and surfactants and decreased by oxidizing agents, Cu⁺², Zn⁺², and Co⁺² (p < 0.05). However, univalent ions Na⁺ and K⁺ did not show any significant effect on the activity of both trypsins (p > 0.05). The results of our study show that the properties of trypsin from beluga and sevruga are in agreement with data reported in bony fish and can contribute to the clear understanding of trypsin activity in these primitive species.

A hydrogel-fiber-hydrogel composite scaffold based on silk fibroin with the dual-delivery of oxygen and quercetin

Supplying sufficient oxygen within the scaffolds is one of the essential hindrances in tissue engineering that can be resolved by oxygen-generating biomaterials (OGBs). Two main issues related to OGBs are controlling oxygenation and reactive oxygen species (ROS). To address these concerns, we developed a composite scaffold entailing three layers (hydrogel-electrospun fibers-hydrogel) with antioxidant and antibacterial properties. The fibers, the middle layer, reinforced the composite structure, enhancing the mechanical strength from 4.27 ± 0.15 to 8.27 ± 0.25 kPa; also, this layer is made of calcium peroxide and silk fibroin (SF) through electrospinning, which enables oxygen delivery. The first and third layers are physical SF hydrogels to control oxygen release, containing quercetin (Q), a nonenzymatic antioxidant. This composite scaffold resulted in almost more than 40 mmHg of oxygen release for at least 13 days, and compared with similar studies is in a high range. Here, Q was used for the first time for an OGB to scavenge the possible ROS. Q delivery not only led to antioxidant activity but also stabilized oxygen release and enhanced cell viability. Based on the given results, this composite scaffold can be introduced as a safe and controllable oxygen supplier, which is promising for tissue engineering applications, particularly for bone.

A dual functional chondro-inductive chitosan thermogel with high shear modulus and sustained drug release for cartilage tissue engineering

We report a chitosan-based nanocomposite thermogel with superior shear modulus resembling that of cartilage and dual pro-chondrogenic and anti-inflammatory functions. Two therapeutic agents, kartogenin (KGN) and diclofenac sodium (DS), are employed to promote chondrogenesis of stem cells and suppress inflammation, respectively. To extend the release time in a controlled manner, KGN is encapsulated in the uniform-sized starch microspheres and DS is loaded into the halloysite nanotubes. Both drug carriers are doped into the maleimide-modified chitosan hydrogel to produce a shear modulus of 167 ± 5 kPa that is comparable to that of articular cartilage (50-250 kPa). Owing to the hydrogel injectability and relatively suitable gelation time (5 ± 0.5 min) at 37 °C, this system potentially constitutes a manageable platform for clinical practice. Moreover, sustained linear drug release for over a month boosts chondro-differentiation of stem cells to eliminate the necessity for multiple administrations. Considering virtues such as thermogel strength and ability to co-deliver anti-inflammatory and chondro-inductive biomolecules continuously, the materials and strategy have promising potential in functional cartilage tissue engineering.

Ionic conductive nanocomposite based on poly(l-lactic acid)/poly(amidoamine) dendrimerelectrospun nanofibrous for biomedical application

The modification of poly (l-lactic acid) (PLLA) electrospun nanofibrous scaffolds was carried out by blending with second-generation poly amidoamine (PAMAM) for enhancement of their ionic conductivity. The samples containing PLLA and various amounts of PAMAM (1%, 3%, 5%, and 7% by wt.) were fabricated by electrospinning techniques. The electrospun fibers were characterized using scanning electron microscopy (SEM), porosity, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry, contact angle measurement, water uptake measurement, mechanical properties, and electrical properties. Furthermore,in vitrodegradation study and cell viability assay were investigated in biomaterial applications. Creating amide groups through aminolysis reaction was confirmed by FTIR analysis successfully. The results reveal that adding PAMAM caused an increase in fiber diameter, crystallinity percentage, hydrophilicity, water absorption, elongation-at-break, and OE-mesenchymal stem cell viability. It is worth mentioning that this is the first report investigating the conductivity of PLLA/PAMAM nanofiber. The results revealed that by increasing the amount of PAMAM, the ionic conductivity of scaffolds was enhanced by about nine times. Moreover, the outcomes indicated that the presence of PAMAM could improve the limitations of PLLA like hydrophobicity, lack of active group, and poor cell adhesion.

Hemostatic Electrospun Nanocomposite Containing Poly(lactic acid)/Halloysite Nanotube Functionalized by Poly(amidoamine) Dendrimer for Wound Healing Application: In Vitro and In Vivo Assays

The main challenge in treating injuries is excessive bleeding whereas intervention is required if the body's hemostatic systems fail to control the bleeding. Herein, a novel nanocomposite consisting of poly(lactic acid) (PLA) and poly(amidoamine) (PAMAM) dendrimer functionalized halloysite nanotube (HNT) with a highly porous structure via electrospinning is developed. HNT is functionalized by PAMAM via divergent synthetic routes from zero to third-generation numbers. The effect of different percentages and generation numbers of PAMAM dendrimer (G1, G2, and G3) functionalized HNT on PLA is studied using physicochemical nanocomposite characteristics. These resultant nanocomposites provide a nanofibrous structure with appropriate physicochemical characteristics such as mechanical properties, surface wettability, and water permeability. The hemostatic assays indicate that nanocomposite with PAMAM G3 functionalized HNT have the quickest blood clotting time due to the abundant amino functional group. Furthermore, the nanocomposites with 10 wt% of nanoparticles significantly promote cellular behavior in vitro. The in vivo study demonstrates that PLA/PAMAM G3 functionalized HNT promotes angiogenesis, collagen deposition, and re-epithelialization in the wound sites of the rat model, as well as inhibiting inflammatory response. The findings indicate that nanofibrous structure and the presence of dendrimer functionalized HNT have a synergetic effect on the enhanced nanocomposite wound healing performance.

A novel substrate based on electrospun polyurethane nanofibers and electrosprayed polyvinyl alcohol microparticles for recombinant human erythropoietin delivery

After myocardial infarction caused by a heart attack, endothelial cells need to be preserved in order to regenerate new capillaries. Moreover, sufficient mechanical support is necessary for the infarcted myocardium to pump the blood. Herein, we designed a novel substrate containing polyurethane (PU) nanofibrous layers and recombinant human erythropoietin (rhEPO)-loaded microparticles for both controlled releases of rhEPO and mechanical support of myocardium. In this system, the single-layer (SL) and double-layer (DL) PU nanofibers were electrospun, and then microparticles with different rhEPO:polyvinyl alcohol (PVA) ratios were electrosprayed on the layers. The in vitro release behavior of rhEPO from SL substrates was not satisfactory, and then the study focused on DL patches in which the release profile was in accordance with Korsmeyer-Peppas model. The release exponent of 0.89 for the DL PU/120PVA:1rhEPO represented zero-order release. The results inferred that these substrates possessed highly tailored mechanical properties; Young's modulus and ultimate tensile strength of the substrates were 74-172 kPa and 7.4-9.9 MPa, respectively. The rhEPO release from the substrates was leading to the proper adhesion of endothelial cells and more than 95% cell viability. The results indicated that the patch of elastic nanofibers and microparticles offered a potential substrate for simultaneous rhEPO delivery to endothelial cells and also mechanically supporting the infarcted myocardium.

Silk fibroin hydrogel/dexamethasone sodium phosphate loaded chitosan nanoparticles as a potential drug delivery system

The application of nanoparticles-loaded hydrogel as a novel formulation has gotten much attention for a potential drug delivery method for desire drug controlling and targeting. This study prepared a sustained release formulation using dexamethasone sodium phosphate-loaded chitosan nanoparticles embedded in silk fibroin hydrogel. Dexamethasone sodium phosphate-loaded chitosan nanoparticles (DEX-CSNPs) was developed using the ionotropic-gelation technique and inserted in the silk fibroin hydrogel (SFH). Mean particle size, polydispersity index (PDI), and zeta potential of DEX-CSNPs were 488.05±38.69 nm, 0.15±0.07, 32.12±2.42 mV, respectively. The encapsulation efficiency (EE), drug loading capacity (LC), and the cumulative amount of released drug of DEX-loaded CSNPs, which detected in phosphate buffer saline (PBS) solution, were 67.6±6.7%, 15.7±5.7%, and 75.84%, respectively. The DEX-CSNPs were then mixed with silk fibroin (SF) solution and induced gelation by sonication to prepare a drug-releasing system. As a result, the scanning electron microscopy (SEM) image shows that the prepared drug delivery system had a properly interconnected porous structure. Smaller pore size, greater porosity, higher water uptake, and swelling ratio were achieved by incorporating CSNPs and DEX-loaded CSNPs. The cytotoxicity study was performed for the L929 fibroblast cell line. The drug release kinetics study was performed on a prepared drug delivery system. Finally, the release test results showed a suitable extended-release of DEX from the carrier over 16 days. Overall, the developed drug-releasing system can be a promising candidate for drug delivery applications.

Amine-terminated dendritic polymers as promising nanoplatform for diagnostic and therapeutic agents' modification: A review

It is often challenging to design diagnostic and therapeutic agents that fulfill all functional requirements. So, bulk and surface modifications as a common approach for biomedical applications have been suggested. There have been considerable research interests in using nanomaterials to the prementioned methods. Among all nanomaterials, dendritic materials with three-dimensional structures, host-guest properties, and nano-polymeric dimensions have received considerable attention. Amine-terminated dendritic structures including, polyamidoamine (PAMAM), polypropyleneimine (PPI), and polyethyleneimine (PEI), have been enormously utilized in bio-modification. This review briefly described the structure of these three common dendritic polymers and their use to modify diagnostic and therapeutic agents in six major applications, including drug delivery, gene delivery, biosensor, bioimaging, tissue engineering, and antimicrobial activity. The current review covers amine-terminated dendritic polymers toxicity challenging and improvement strategies as well.

Novel decorated nanostructured lipid carrier for simultaneous active targeting of three anti-cancer agents

Cancer-targeted co-delivery of therapeutic agents has been recognized as an effective strategy for increasing efficacy and reducing side effects of therapeutic agents. In this study, we used methotrexate (MTX) alone as a targeting moiety and chemotherapeutic agent and in combination with docetaxel (DTX) and doxorubicin (DOX) as chemotherapeutic agents to stop cancer cell proliferation with the aid of newly designed nanostructured lipid carriers (NLCs). The physicochemical properties of our designed nanocomplexes were evaluated by DLS, FT-IR spectroscopy, SEM, and TEM. Moreover, the targeting efficiency of the designed and synthesized nanoplatforms was evaluated on the folate receptor (FR) positive human breast cancer cell line (MCF-7) and FR negative human alveolar basal epithelial cells (A549). The NLCs/DTX/DOX/CS and NLCs/DTX/DOX/CS-MTX complexes significantly increased the cell cytotoxicity and the cell apoptosis rate. However, the complexes significantly reduced the capability of colony formation and cell migration. Our results revealed that NLCs/DTX/DOX/CS-MTX had synergistic cytotoxicity, reactive oxygen spaces, autophagy, and the apoptosis induction ability with an enhanced cellular internalization rate in FR-positive cancer cells, thorough MTX recognition capability. We conclude that the NLCs/DTX/DOX/CS-MTX complex is a new promising paradigm for breast cancer-targeted co-delivery.

Injectable and reversible preformed cryogels based on chemically crosslinked gelatin methacrylate (GelMA) and physically crosslinked hyaluronic acid (HA) for soft tissue engineering

Hydrogels are a promising choice for soft tissue (cartilage, skin and adipose) engineering and repair. However, lack of interconnected porosity and poor mechanical performance have hindered their application, especially in natural polymer-based hydrogels. Cryogels with the potential to overcome the shortcomings of hydrogels have drawn attention in the last few years. Thus, in this study, highly porous and mechanically robust cryogels based on interpenetrating polymer network (IPN) of gelatin methacrylate (GelMA) and hyaluronic acid (HA) were fabricated for soft tissue engineering application. Cryogels have a constant amount of GelMA (3% wt) with different concentrations of HA (from 5% to 20 % w/w). In fact, crosslinking through cryogelation in subzero temperature facilitates the formation of interconnected pores with 90 % porosity percentage without external progen. On the other hand, high mechanical stability (no failure up to 90 % compression) was achieved due to the cryogelation and chemical crosslinking of GelMA as well as physical crosslinking of HA. Furthermore, the porous and hydrophile nature of the cryogels resulted in shape memory properties under compression, which can reverse to initial shape after retaining the water. Although increasing the HA concentration followed by the density of physical crosslinking boosted the mechanical performance of cryogels under compression, it limited the reversibility properties. Nevertheless, all cryogels with different HA concentrations showed acceptable gel strength and Young's modulus (G-H-20, E = 6kPa) and had appropriate pore size for cell infiltration and nutrient transportation with good cell adhesion and high cell viability (more than 90 %). The unique property of fabricated cryogels that facilitate less invasive delivery makes them a promising alternative for the soft tissue application.

Fabrication of nanocomposite/nanofibrous functionally graded biomimetic scaffolds for osteochondral tissue regeneration

One of the main challenges in treating osteochondral lesions via tissue engineering approach is providing scaffolds with unique characteristics to mimic the complexity. It has led to application of heterogeneous scaffolds as a potential candidate for engineering of osteochondral tissues, in which graded multilayered-structure should promote bone and cartilage growth. By designing three-dimensional (3D)-nanofibrous scaffolds mimicking the native extracellular matrix's nanoscale structure, cells can grow in controlled conditions and regenerate the damaged tissue. In this study, novel 3D-functionality graded nanofibrous scaffolds composed of five layers based on different compositions containing polycaprolactone(PCL)/gelatin(Gel)/nanohydroxyapatite (nHA) for osteoregeneration and chitosan(Cs)/polyvinylalcohol(PVA) for chondral regeneration are introduced. This scaffold is fabricated by electrospinning technique using spring as collector to create 3D-nanofibrous scaffolds. Fourier-transform infrared spectroscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, mechanical compression test, porosimetry, and water uptake studies were applied to study each layer's physicochemical properties and whole functionally graded scaffold. Besides, biodegradation and biological studies were done to investigate biological performance of scaffold. Results showed that each layer has a fibrous structure with continuous nanofibers with improved pore size and porosity of novel 3D scaffold (6-13 μm and 90%) compared with two-dimensional (2D) mat (2.2 μm and 19.3%) with higher water uptake capacity (about 100 times of 2D mat). Compression modulus of electrospun scaffold was increased to 78 MPa by adding nHA. The biological studies revealed that the layer designed for osteoregeneration could improve cell proliferation rate in comparison to the layer designed for chondral regeneration. These results showed such structure possesses a promising potential for the treatment of osteochondral defects.

Crosslinking strategies for silk fibroin hydrogels: promising biomedical materials

Due to their strong biomimetic potential, silk fibroin (SF) hydrogels are impressive candidates for tissue engineering, due to their tunable mechanical properties, biocompatibility, low immunotoxicity, controllable biodegradability, and a remarkable capacity for biomaterial modification and the realization of a specific molecular structure. The fundamental chemical and physical structure of SF allows its structure to be altered using various crosslinking strategies. The established crosslinking methods enable the formation of three-dimensional (3D) networks under physiological conditions. There are different chemical and physical crosslinking mechanisms available for the generation of SF hydrogels (SFHs). These methods, either chemical or physical, change the structure of SF and improve its mechanical stability, although each method has its advantages and disadvantages. While chemical crosslinking agents guarantee the mechanical strength of SFH through the generation of covalent bonds, they could cause some toxicity, and their usage is not compatible with a cell-friendly technology. On the other hand, physical crosslinking approaches have been implemented in the absence of chemical solvents by the induction of β-sheet conformation in the SF structure. Unfortunately, it is not easy to control the shape and properties of SFHs when using this method. The current review discusses the different crosslinking mechanisms of SFH in detail, in order to support the development of engineered SFHs for biomedical applications.

Electrospun polyurethane/carbon nanotube composites with different amounts of carbon nanotubes and almost the same fiber diameter for biomedical applications

The aim of this study was to investigate the net effect of raw carbon nanotube (CNTs) on the final properties of polyurethane (PU)/CNT composites considering their biomedical applications. So, neat PU and PU/CNT composites containing different amounts of CNTs (0.05%, 0.1%, 0.5%, and 1%) were prepared by electrospinning. Electrospinning parameters optimized to have a bead-free structure with no significant difference between their mean fiber diameter and porosity percentage. The results showed adding CNTs caused an increase in crystallinity percentage, water absorption ratio, young modulus, toughness, conductivity, degradation time in an accelerated medium, clotting time, and human umbilical vein endothelial cells adhesion. But a direct relationship between CNT percentage and the calcium adsorption was not detected. Moreover, no significant cytotoxicity was observed for 7-day extracts of all samples. These nanocomposites have a vast range of properties which make them a good candidate as neural, cardiovascular, osseous biomaterials or tendon, and ligament substitute.

Preparation of internally-crosslinked alginate microspheres: Optimization of process parameters and study of pH-responsive behaviors

In this study, the effects of various parameters of the water-in-oil emulsification/internal gelation method on the properties of calcium-alginate microparticles were evaluated and optimized. Results showed that the spherical-shaped microparticles with the highest circularity and high production yield can be produced by alginate solution with a concentration of 2 wt.%, calcium carbonate/alginate ratio of 10/1 (w/w), water/oil volume ratio of 1/20, emulsifier concentration of 5 % (v/v), and emulsification speed of 1000 rpm. Two model drugs including simvastatin lactone and simvastatin β-hydroxyacid were loaded into the microspheres with promising encapsulation efficiencies of 73 % and 69 %, respectively. The microspheres showed a pH-responsive swelling behavior with a percentage of 10.60 %, 352.65 %, 690.03 %, and 1211.46 % at the pH values of 2.0, 4.5, 7.4, and 8.5, respectively. The microspheres showed an increasing trend of release rate in direct proportion to pH. These findings would be useful for therapeutic applications which need pH-responsive drug carriers.

Biomimetic double-sided polypropylene mesh modified by DOPA and ofloxacin loaded carboxyethyl chitosan/polyvinyl alcohol-polycaprolactone nanofibers for potential hernia repair applications

Polypropylene (PP) meshes are the most widely used as hernioplasty prostheses. As far as hernia repair is concerned, bacterial contamination and tissue adhesion would be the clinical issues. Moreover, an optimal mesh should assist the healing process of hernia defect and avoid undesired prosthesis displacements. In this present study, the commercial hernia mesh was modified to solve the mentioned problems. Accordingly, a new bi-functional PP mesh with anti-adhesion and antibacterial properties on the front and adhesion properties (reduce undesired displacements) on the backside was prepared. The backside of PP mesh was coated with polycaprolactone (PCL) nanofibers modified by mussel-inspired L-3,4-dihydroxyphenylalanine (L-DOPA) bioadhesive. The front side was composed of two different nanofibrous mats, including hybrid and two-layered mats with different antibacterial properties, drug release, and biodegradation behavior, which were based on PCL nanofibers and biomacromolecule carboxyethyl-chitosan (CECS)/polyvinyl alcohol (PVA) nanofibers containing different ofloxacin amounts. The anti-adhesion, antibacterial, and biocompatibility studies were done through in-vitro experiments. The results revealed that DOPA coated PCL/PP/hybrid meshes containing ofloxacin below 20 wt% possessed proper cell viability, AdMSCs adhesion prevention, and excellent antibacterial efficiency. Moreover, DOPA modifications not only enhanced the surface properties of the PP mesh but also improved cell adhesion, spreading, and proliferation.

Mussel-inspired polydopamine-coated silk fibroin as a promising biomaterial

Silk fibroin (SF) is one of the natural biomaterials with promising and growing potential in different clinical applications such as corneal transplantation, donor site skin substitute and tympanic membrane. Some of the SFs that are extracted from mulberry silkworm do not have the arginyl–glycyl–aspartic acid (RGD) sequence for properly supporting cell adhesion and proliferation. Therefore, in the current study, polydopamine (PDA)-coated SFs were prepared to provide an RGD sequence, and the effect of PDA coating on different properties of SF was investigated. The results are also compared with those of an amniotic membrane (AM) that is a commercially available natural biomaterial for the mentioned applications. The Raman spectra showed characteristic peaks at 1581 and 1370 cm−1, which demonstrate the formation of the coating layer on the surface of the films. The results showed that coating led to no significant difference in surface hydrophilicity; a smoother surface; and improved cell attachment and distribution; and a little decrease in membrane transparency, but the membrane still being transparent enough to provide vivid vision through it.

Injectable in situ forming kartogenin-loaded chitosan hydrogel with tunable rheological properties for cartilage tissue engineering

Limited regeneration capacity of cartilage can be addressed by tissue engineering approaches including localized delivery of bioactive agents using biomaterials. Although chitosan hydrogels have been considered as appropriate candidates for these purposes, however, their poor mechanical properties limit their real applications. Here, we develop in situ forming chitosan hydrogels with enhanced shear modulus by chemical modification of chitosan using N-(β-maleimidopropyloxy) succinimide ester (BMPS). Moreover, we utilize β-Glycerophosphate (β-GP) in the hydrogels for achieving thermosensitivity. We investigate the effects of BMPS, β-GP and chitosan concentration on rheological and swelling properties of the hydrogels. Accordingly, we generate significant statistical models by response surface method to predict these properties. These models provide us beneficial tools to tune the hydrogel properties depending on the cartilage defect location and properties. Finally, we incorporate a recently discovered small biomolecule, kartogenin (KGN), for promoting chondrogenesis of stem cells into the optimized hydrogel. The hydrogel's shear modulus is 78 ± 5 kPa which covers a wide range of human articular cartilage shear modulus (50-250 kPa). It can be injected to the defects non-invasively at room temperature which gels at 37 °C within minutes. Additionally, it provides a sustained KGN release for ∼40 days that may eliminate the need of multiple injections. In vitro chondrogenic results confirm enhanced chondrogenic differentiation of human adipose mesenchymal stem cells (hAMSCs) treated with KGN-loaded hydrogel, compared to pure KGN. Based on the enhanced hydrogel shear modulus, injectability, gelation behavior, long-term drug release and in vitro results, this thermosensitive hydrogel looks promising for cartilage tissue engineering.

Chitosan/gum tragacanth/PVA hybrid nanofibrous scaffold for tissue engineering applications

In this paper, preparation and characterization of a nanofibrous scaffold comprising both chitosan (CS) and gum tragacanth (GT) are reported for the first time. CS and GT were separately blended with poly(vinyl alcohol) (PVA) and simultaneously electrospun by a double-nozzle electrospinning apparatus, and the resulting nanofibrous mats were compared with CS/PVA and GT/PVA electrospun ones. Scanning electron microscopy images showed uniform bead-free nanofibers with some merging areas and an average fiber diameter of ∼273 nm for CS-PVA/GT-PVA. The ultimate tensile strength and strain at break of the hybrid nanofibers were ∼20 MPa and ∼9%, respectively, which were significantly higher than those of the CS/PVA and GT/PVA nanofibers. The CS-PVA/GT-PVA nanofibrous mats also showed a water droplet contact angle value (∼31°) between those of the CS/PVA and GT/PVA nanofibrous mats. MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay using L929 fibroblast cells indicated more biocompatibility of the CS-PVA/GT-PVA hybrid nanofibers compared with the CS/PVA and GT/PVA ones. The obtained results showed that the CS-PVA/GT-PVA hybrid nanofibrous scaffold might be useful for tissue engineering applications.

Electrospun PET/PCL small diameter nanofibrous conduit for biomedical application

In recent years, the mortality rate caused by cardiovascular diseases has increased dramatically around the world. Tissue engineering is considered as a novel and efficient approach to offer a substituent of engineered tissues for defective body tissues. For this purpose, fabrication of the scaffold that resembles the physical and mechanical properties of natural body vessels, and culturing appropriate cells seems to be a promising approach. Due to the fibrous structure of the vascular wall, the nanofibrous scaffold produced by electrospinning could be a proper choice for vascular tissue engineering. One of the main properties of artificial vessels is its mechanical properties consistency with the native one in order to mimic its natural characteristics. To do so, in present study two biocompatible polymers, polyethylene terephthalate (PET) and polycaprolactone (PCL) with different blend ratio were electrospun into a tubular nanofibrous structure with 6 mm internal diameter and the mechanical properties such as tensile strength, modulus, compliance, bursting pressure, elastic recovery, and suture retention were investigated. The results revealed that PET/PCL (1:3) had better similar properties with the reported natural one as its longitudinal and transverse tensile strength was about 9.47 and 6.38 MPa, respectively. The longitudinal strain at break, compliance, bursting pressure, and suture retention were 205.88 ± 51.12%, 4.19 ± 0.78%/100 mmHg, 6378.76 ± 2159.20 mmHg, and 287.73 ± 13.10 gmf, respectively. The elasticity of this studied sample was 60.21 ± 12.49% as it was relieved, and this may be a good candidate for the artificial vessel in this size, as the MTT test confirmed its appropriate substrate for cell culture.

Safely Dissolvable and Healable Active Packaging Films Based on Alginate and Pectin

Extensive usage of long-lasting petroleum based plastics for short-lived application such as packaging has raised concerns regarding their role in environmental pollution. In this research, we have developed active, healable, and safely dissolvable alginate-pectin based biocomposites that have potential applications in food packaging. The morphological study revealed the rough surface of these biocomposite films. Tensile properties indicated that the fabricated samples have mechanical properties in the range of commercially available packaging films while possessing excellent healing efficiency. Biocomposite films exhibited higher hydrophobicity properties compared to neat alginate films. Thermal analysis indicated that crosslinked biocomposite samples possess higher thermal stability in temperatures below 120 °C, while antibacterial analysis against E. coli and S. aureus revealed the antibacterial properties of the prepared samples against different bacteria. The fabricated biodegradable multi-functional biocomposite films possess various imperative properties, making them ideal for utilization as packaging material.

Polyvinyl alcohol/soy protein isolate nanofibrous patch for wound-healing applications

Soy protein isolate (SPI), due to its biocompatibility, biodegradability, abundance and being inexpensive, is a suitable polymer for medical applications. In this study, electrospun nanofibrous mats (ENMs) and casting films (CFs), comprising polyvinyl alcohol (PVA)/SPI, were prepared and compared. Both crosslinked ENMs and CFs physical, chemical, mechanical, and biological properties were investigated for wound-healing applications. Considering the importance of exudate absorption by wound dressing the uptake test of all samples was performed in simulated exudate solution. The amount of absorbed exudate, water vapor transmission rate, and mechanical elongation for CFs were 69.243% ± 22.7, 266.7 g/m² day, and 2.0825% and increased to 383.33% ± 105.3, 1332.02 g/m² day, and 12.292% in the case of ENMs, respectively. There was no significant difference between cell supporting of the two samples due to similar composition and their non-toxic properties. The results showed that ENMs have promising potential in wound-healing applications.

Fabrications of small diameter compliance bypass conduit using electrospinning of clinical grade polyurethane

Objective

Compliance and viscoelastic mismatches of small diameter vascular conduits and host arteries have been the cause of conduit’s failure.

Methods

To reduce these mismatches, the aim of this study was to develop and characterize a polyurethane conduit, which mimics the viscoelastic behaviors of human arteries. Electrospinning technique was used to fabricate tubular polyurethane conduits with similar properties of the human common carotid artery. This was achieved by manipulating the fiber diameter by altering the syringe flow rate of the solution. The mechanical and viscoelastic properties of the fabricated electrospun polyurethane conduits were, then, compared with commercially available vascular conduits, expanded polytetrafluoroethylene, polyethylene terephthalate (Dacron®) and the healthy human common carotid arteries. In addition, a comprehensive constitutive model was proposed to capture the visco-hyperelastic behavior of the synthetic electrospun polyurethanes, commercial conduits and human common carotid arteries.

Results

Results showed that increasing the fiber diameter of electrospun polyurethanes from 114 to 190 nm reduced Young’s modulus from 8 to 2 MPa. Also, thicker fiber diameter yielded in higher conduits’ viscosity. Furthermore, the results revealed that proposed visco-hyperelastic model is strongly able to fit the experimental data with great precision which proofs the reliability of the proposed model to address both nonlinear elasticity and viscoelasticity of the electrospun polyurethanes, commercial conduits and human common carotid arteries.

Conclusions

In conclusion, statistical analysis revealed that the elastic and viscous properties of 190 nm fiber diameter conduit are very similar to that of human common carotid artery in comparison to the commercial expanded polytetrafluoroethylene and Dacron® that are up to nine and seven times stiffer than natural vessels. Therefore, based on our findings, from the mechanical point of view, by considering the amount of Young’s modulus, compliance, distensibility and viscoelastic behavior, the fabricated electrospun polyurethane with fiber diameter of 189.6 ± 52.89 nm is an optimum conduit with promising potential for substituting natural human vessels.

Surface engineering of titanium-based implants using electrospraying and dip coating methods

Titanium and its alloys due to their low density, good mechanical and biological properties are of the most common orthopedic metals. One of the main challenges regarding to titanium implants is their loosening after long term implantation in patient's body. Many methods such as alteration in surface topography with focus on improving osseointegration or biocompatibility in overall are supposed to overcome this issue. In this research, titanium surface topography is altered via electrospraying a solution of titanium salt, carrier polymer (polyvinylpyrrolidone) and solvents. The dip coated samples in the same solution are prepared and investigated as control. The electrosprayed or dip coated samples were pyrolysised in furnace at 500 °C to remove polymeric components. Then the stabilized microstructures on the surfaces were evaluated via scanning electron microscopy (SEM), water contact angle (WCA) measurement, X-ray diffraction (XRD) and atomic force microscope (AFM). Also, in order to study the bioactivity of modified samples, they were immersed in simulated body fluid (SBF) and their precipitates were studied. The cellular investigations were done by studying the cell morphology, MTT and alkaline phosphatase (ALP) activity assays. The results showed improvement in bioactivity and cellular response for DP3 and SP15 more than other samples implying the promising potential of these two approaches for titanium implant surface modification.

Mechanical guidelines on the properties of human healthy arteries in the design and fabrication of vascular grafts: experimental tests and quasi-linear viscoelastic model

PURPOSE

Knowledge of mechanical behavior of healthy human arteries as the guidelines to target properties of vascular grafts deserves special attention. There is a lack of mathematical model to characterize mechanical behavior of biomaterial while many mathematical models to reflect mechanics of human arteries have been proposed. The objective of this paper was set to measure mechanical properties of healthy human arteries including Common Carotid Artery (CCA), Abdominal Aorta Artery (AAA), Subclavian Artery (SA), Common Iliac Artery (CIA) and Right and Left Iliac Artery (RIA and LIA) and compare them to those of commercial ePTFE and Dacron®.

METHODS

Series of stress relaxation and strain to failure tests vere performed on all samples. The experimental data was utilized to develop quasi-linear viscoelastic (QLV) model of both natural and artificial arteries.

RESULTS

ePTFE is the stiffest sample, while the CCA is the most compliant one among all. RIA and CIA are more viscous than the other natural arteries, while AA and CCA are less viscous. The proposed model demonstrated an accurate fit to the experimental results, a proof of its ability to model both nonlinear elasticity and viscoelasticity of the human arteries and commercial ones.

CONCLUSIONS

ePTFE and Dacron® are much stiffer than human arteries that may lead to the disruption of blood hemodynamic and may not be biomechanically feasible as a replacement.

Enhanced cellular response elicited by addition of amniotic fluid to alginate hydrogel-electrospun silk fibroin fibers for potential wound dressing application

This study aimed to evaluate a novel bioactive wound dressing from alginate hydrogel-electrospun silk fibroin (SF) fibers with the ability to deliver amniotic fluid (AF) to the wound site. AF is highly enriched with multiple therapeutic agents that can promote cellular response and wound healing. In this study, electrospun SF fibers were first fabricated by electrospinning method and then combined with the alginate hydrogel (ALG) containing AF. Different dressings were made by changing the alginate to AF ratio. The scanning electron microscopy images revealed that SF fibers were fully covered with alginate hydrogel. In addition, the modulus of the dressing decreased by lowering ALG/AF ratios, while a reverse trend was observed for the elongation-at-break. In vitro AF release profiles indicated that an increase in the concentration of ALG leads to a reduction in the AF amount. Fibroblast culturing on the fabricated dressings demonstrated that cellular proliferation, spreading, and secretion of collagen enhanced with increasing AF. Taken together, our results provide a novel bioactive dressing with great potentials for speeding up the healing process in severe wounds.

Electrospun nanofibers comprising of silk fibroin/gelatin for drug delivery applications: Thyme essential oil and doxycycline monohydrate release study

In this study, a nanofibrous electrospun substrate based on the silk fibroin (SF) and gelatin (GT) polymers were prepared and evaluated. The SF/GT blended solutions were prepared with various ratios of GT in formic acid and electrospun to obtain bead-free fibers. Results showed that addition of GT to SF increased nanofiber's diameter, bulk hydrophilicity, surface wettability, mass loss percentage, but decreased Young's modulus, tensile strength, and porosity of the SF/GT mats. According to the obtained results, the mat containing 10% of GT was selected as the optimized mat for further studies and loaded with thyme essential oil (TEO) and doxycycline monohydrate (DCMH) as the antibacterial agents. Release studies showed a burst release of TEO from the mat within the first 3 h, while the DCMH had a sustained release during 48 h. In comparison to the TEO-loaded mat, the DCMH-loaded one showed larger inhibition zones against Staphylococcus aureus and Klebsiella pneumoniae bacteria. Meanwhile, cellular studies using mouse fibroblast L929 cells showed excellent cell-compatibility of TEO- and DCMH-loaded mats. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1092-1103, 2018.

A comparison of the material properties of natural and synthetic vascular walls

Characterization of the mechanical properties of native and synthetic vascular grafts is an essential task in the process of designing novel vascular constructs. The aim in this study was to compare the mechanical behavior of ovine left Subclavian artery with that of POSS-PCU (a commercial biomaterial which is currently under clinical investigation. ClinicalTrials.gov Identifier: NCT02301312). We used Delfino's strain energy potential within the framework of quasilinear viscoelasticity theory to capture the viscoelastic response of the considered materials. The material parameters of the quasilinear viscoelastic constitutive equation were determined through a combination of experimental and computational method. First, a uniaxial tensile testing device was used to perform a series of stress relaxation tests on ring samples. Then, the derived quasilinear viscoelastic models were implemented into finite element system. With the aid of mechanical experimentation and finite element simulation, the material parameters were obtained, modified and used for comparison of the mechanical properties of vascular walls. The results showed that the stiffness and the long term viscoelastic parameters of POSS-PCU may lead to different stress responses of the vascular walls. These two factors can be improved by modifications in manufacturing parameters of the synthetic vessel.

Electrospun silk-based nanofibrous scaffolds: fiber diameter and oxygen transfer

In this study, silk fibroin was extracted from cocoons of silkworms and fabricated into nonwoven mats by electrospinning method. A new model based on the group method of data handling (GMDH) and artificial neural network (ANN) was developed for estimation of the average diameter of electrospun silk fibroin nanofibers. In this regard, concentration, flow rate, voltage, distance, and speed of collector were used as input parameters and average diameter of the fibers was considered as output parameter. Two models were capable to estimate average diameter of fibers with good accuracy. The average absolute relative deviation for GMDH and ANN models was equal to 3.56 and 2.28 %, respectively. Furthermore, due to importance of oxygen delivery to site of injury to promote wound healing, continuity equation for mass transport was employed for prediction of oxygen profile in the system containing wound dressing and skin. The result showed that our prepared wound dressing is capable to pass the oxygen completely to the skin layer and is not acting as a barrier for oxygen delivery to wound site. Since average nanofibers diameter can influence the mat physical, mechanical and biological properties then this model may serve as a useful guide to obtain tailor made and uniform silk nanofibers at various combinations of process variables.