Simulative investigation of the required level of geometrical individualization of the lumbar spines to predict fractures

Injury mechanisms of the lumbar spine under dynamic loading are dependent on spine curvature and anatomical variation. Impact simulation with finite element (FE) models can assist the reconstruction and prediction of injuries. The objective of this study was to determine which level of individualization of a baseline FE lumbar spine model is necessary to replicate experimental responses and fracture locations in a dynamic experiment.Experimental X-rays from 26 dynamic drop tower tests were used to create three configurations of a lumbar spine model (T12 to L5): baseline, with aligned vertebrae (positioned), and with aligned and morphed vertebrae (morphed). Each model was simulated with the corresponding loading and boundary conditions from dynamic lumbar spine experiments. Force, moment, and kinematic responses were compared to the experimental data. Cosine similarity was computed to assess how well simulation responses match the experimental data. The pressure distribution within the vertebrae was used to compare fracture risk and fracture location between the different models.The positioned models replicated the injured spinal level and the fracture patterns quite well, though the morphed models provided slightly more accuracy. However, for impact reconstruction or injury prediction, the authors recommend pure positioning for whole-body models, as the gain in accuracy was relatively small, while the morphing modifications of the model require considerably higher efforts. These results improve the understanding of the application of human body models to investigate lumbar injury mechanisms with FE models.

Subject-Specific Geometry of FE Lumbar Spine Models for the Replication of Fracture Locations Using Dynamic Drop Tests

For traumatic lumbar spine injuries, the mechanisms and influence of anthropometrical variation are not yet fully understood under dynamic loading. Our objective was to evaluate whether geometrically subject-specific explicit finite element (FE) lumbar spine models based on state-of-the-art clinical CT data combined with general material properties from the literature could replicate the experimental responses and the fracture locations via a dynamic drop tower-test setup. The experimental CT datasets from a dynamic drop tower-test setup were used to create anatomical details of four lumbar spine models (T12 to L5). The soft tissues from THUMS v4.1 were integrated by morphing. Each model was simulated with the corresponding loading and boundary conditions from the dynamic lumbar spine tests that produced differing injuries and injury locations. The simulations resulted in force, moment, and kinematic responses that effectively matched the experimental data. The pressure distribution within the models was used to compare the fracture occurrence and location. The spinal levels that sustained vertebral body fracture in the experiment showed higher simulation pressure values in the anterior elements than those in the levels that did not fracture in the reference experiments. Similarly, the spinal levels that sustained posterior element fracture in the experiments showed higher simulation pressure values in the vertebral posterior structures compared to those in the levels that did not sustain fracture. Our study showed that the incorporation of the spinal geometry and orientation could be used to replicate the fracture type and location under dynamic loading. Our results provided an understanding of the lumbar injury mechanisms and knowledge on the load thresholds that could be used for injury prediction with explicit FE lumbar spine models.

Sleep loss, caffeine, sleep aids and sedation modify brain abnormalities of mild traumatic brain injury

Little evidence exists about how mild traumatic brain injury (mTBI) is affected by commonly encountered exposures of sleep loss, sleep aids, and caffeine that might be potential therapeutic opportunities. In addition, while propofol sedation is administered in severe TBI, its potential utility in mild TBI is unclear. Each of these exposures is known to have pronounced effects on cerebral metabolism and blood flow and neurochemistry. We hypothesized that they each interact with cerebral metabolic dynamics post-injury and change the subclinical characteristics of mTBI. MTBI in rats was produced by head rotational acceleration injury that mimics the biomechanics of human mTBI. Three mTBIs spaced 48 h apart were used to increase the likelihood that vulnerabilities induced by repeated mTBI would be manifested without clinically relevant structural damage. After the third mTBI, rats were immediately sleep deprived or administered caffeine or suvorexant (an orexin antagonist and sleep aid) for the next 24 h or administered propofol for 5 h. Resting state functional magnetic resonance imaging (rs-fMRI) and diffusion tensor imaging (DTI) were performed 24 h after the third mTBI and again after 30 days to determine changes to the brain mTBI phenotype. Multi-modal analyses on brain regions of interest included measures of functional connectivity and regional homogeneity from rs-fMRI, and mean diffusivity (MD) and fractional anisotropy (FA) from DTI. Each intervention changed the mTBI profile of subclinical effects that presumably underlie healing, compensation, damage, and plasticity. Sleep loss during the acute post-injury period resulted in dramatic changes to functional connectivity. Caffeine, propofol sedation and suvorexant were especially noteworthy for differential effects on microstructure in gray and white matter regions after mTBI. The present results indicate that commonplace exposures and short-term sedation alter the subclinical manifestations of repeated mTBI and therefore likely play roles in symptomatology and vulnerability to damage by repeated mTBI.

Similar Concussion Rates in Spring Football and Preseason: Findings From the Concussion Assessment, Research and Education Consortium

CONTEXT

Increasing attention has been directed toward identifying aspects of football participation for targeted policy change that reduces the concussion risk. Prior researchers evaluated concussion risks during the preseason and regular seasons, leaving the spring season largely unexplored.

DESIGN

In this nationally representative observational investigation of 19 National Collegiate Athletic Association Division I collegiate football programs, we assessed concussion rates and head impact exposures during the preseason, regular season, and spring practices from 2014 to 2019. All participating programs recorded the incidence of concussions, and a subset (n = 6) also measured head impact exposures.

RESULTS

Analyses by time of year and session type indicated that concussion rates and head impact exposures during all practice sessions and contact practices were higher in the spring and preseason than those in the regular season (P < .05). Concussion rates during the spring season and preseason were statistically similar.

CONCLUSIONS

We identified comparable concussion risks in the spring season and preseason, highlighting the need for targeted policy interventions to protect athlete health and safety.

Chronicity of repeated blast traumatic brain injury associated increase in oxycodone seeking in rats

Numerous epidemiological studies have found co-morbidity between non-severe traumatic brain injury (TBI) and substance misuse in both civilian and military populations. Preclinical studies have also identified this relationship for some misused substances. We have previously demonstrated that repeated blast traumatic brain injury (rbTBI) increased oxycodone seeking without increasing oxycodone self-administration, suggesting that the neurological sequelae of traumatic brain injury can elevate opioid misuse liability. Here, we determined the chronicity of this effect by testing different durations of time between injury and oxycodone self-administration and durations of abstinence. We found that the subchronic (four weeks), but not the acute (three days) or chronic (four months) duration between injury and oxycodone self-administration was associated with increased drug seeking and re-acquisition of self-administration following a 10-day abstinence. Examination of other abstinence durations (two days, four weeks, or four months) revealed no effect of rbTBI on drug seeking at any of the abstinence durations tested. Together, these data indicate that there is a window of vulnerability after TBI when oxycodone self-administration is associated with elevated drug seeking and relapse-related behaviors.

Response of Thoraco-Abdominal Tissue in High-Rate Compression

Body armor protects the human from penetrating injuries. However, in the process of defeating a projectile, the back face of the armor can deform into the wearer at extremely high rates. This deformation can cause a variety of soft and hard tissue injuries. Finite element modeling represents one of the best tools to predict injuries from this high-rate compression mechanism. However, the validity of a model is reliant on accurate material properties for biological tissues. In this study, we measured the stress-strain response of thoraco-abdominal tissue during high-rate compression (1000 and 1900 s-1) using a split Hopkinson pressure bar. Using this method, high-rate material properties of porcine adipose, heart, spleen, and stomach tissue were characterized. At a strain rate of 1000 s-1, adipose (E=4.7MPa) was the most compliant, followed by spleen (E=9.6MPa), and then heart (E=13.6MPa) tissue. At a strain rate of 1900 s-1, adipose (E=7.3MPa) was most compliant, followed by spleen (E=10.7MPa), heart (E=14.1MPa), and stomach (E=32.6MPa) tissue. Only adipose tissue demonstrated a consistent rate dependence across these rates, with a stiffer response at 1900 s-1. However, comparison of these tissues to previously published quasi-static and intermediate dynamic experiments revealed a strong rate dependence with increasing stress response from quasi-static to dynamic to high strain rates. Together, these findings can be used to develop finite element models for high-rate compression injuries.

Time Delta Head Impact Frequency: An Analysis on Head Impact Exposure in the Lead Up to a Concussion: Findings from the NCAA-DOD Care Consortium

Sport-related concussions can result from a single high magnitude impact that generates concussive symptoms, repeated subconcussive head impacts aggregating to generate concussive symptoms, or a combined effect from the two mechanisms. The array of symptoms produced by these mechanisms may be clinically interpreted as a sport-related concussion. It was hypothesized that head impact exposure resulting in concussion is influenced by severity, total number, and frequency of subconcussive head impacts. The influence of total number and magnitude of impacts was previously explored, but frequency was investigated to a lesser degree. In this analysis, head impact frequency was investigated over a new metric called ‘time delta’, the time difference from the first recorded head impact of the day until the concussive impact. Four exposure metrics were analyzed over the time delta to determine whether frequency of head impact exposure was greater for athletes on their concussion date relative to other dates of contact participation. Those metrics included head impact frequency, head impact accrual rate, risk weighted exposure (RWE), and RWE accrual rate. Athletes experienced an elevated median number of impacts, RWE, and RWE accrual rate over the time delta on their concussion date compared to non-injury sessions. This finding suggests elevated frequency of head impact exposure on the concussion date compared to other dates that may precipitate the onset of concussion.

Consensus Head Acceleration Measurement Practices (CHAMP): Origins, Methods, Transparency and Disclosure

The use of head kinematic measurement devices has recently proliferated owing to technology advances that make such measurement more feasible. In parallel, demand to understand the biomechanics of head impacts and injury in sports and the military has increased as the burden of such loading on the brain has received focused attention. As a result, the field has matured to the point of needing methodological guidelines to improve the rigor and consistency of research and reduce the risk of scientific bias. To this end, a diverse group of scientists undertook a comprehensive effort to define current best practices in head kinematic measurement, culminating in a series of manuscripts outlining consensus methodologies and companion summary statements. Summary statements were discussed, revised, and voted upon at the Consensus Head Acceleration Measurement Practices (CHAMP) Conference in March 2022. This manuscript summarizes the motivation and methods of the consensus process and introduces recommended reporting checklists to be used to increase transparency and rigor of future experimental design and publication of work in this field. The checklists provide an accessible means for researchers to apply the best practices summarized in the companion manuscripts when reporting studies utilizing head kinematic measurement in sport and military settings.

Association between Preseason/Regular Season Head Impact Exposure and Concussion Incidence in NCAA Football

PURPOSE

Contact sport athletes are exposed to a unique environment where they sustain repeated head impacts throughout the season and can sustain hundreds of head impacts over a few months. Accordingly, recent studies outlined the role that head impact exposure (HIE) has in concussion biomechanics and in the development of cognitive and brain-based changes. Those studies focused on time-bound effects by quantifying exposure leading up to the concussion, or cognitive changes after a season in which athletes had high HIE. However, HIE may have a more prolonged effect. This study identified associations between HIE and concussion incidence during different periods of the college football fall season.

METHODS

This study included 1120 athlete seasons from six National Collegiate Athletic Association Division I football programs across 5 yr. Athletes were instrumented with the Head Impact Telemetry System to record daily HIE. The analysis quantified associations of preseason/regular season/total season concussion incidence with HIE during those periods.

RESULTS

Strong associations were identified between HIE and concussion incidence during different periods of the season. Preseason HIE was associated with preseason and total season concussion incidence, and total season HIE was associated with total season concussion incidence.

CONCLUSIONS

These findings demonstrate a prolonged effect of HIE on concussion risk, wherein elevated preseason HIE was associated with higher concussion risk both during the preseason and throughout the entire fall season. This investigation is the first to provide evidence supporting the hypothesis of a relationship between elevated HIE during the college football preseason and a sustained decreased tolerance for concussion throughout that season.

A Preclinical Rodent Model for Repetitive Subconcussive Head Impact Exposure in Contact Sport Athletes

Repetitive subconcussive head impact exposure has been associated with clinical and MRI changes in some non-concussed contact sport athletes over the course of a season. However, analysis of human tolerance for repeated head impacts is complicated by concussion and head impact exposure history, genetics, and other personal factors. Therefore, the objective of the current study was to develop a rodent model for repetitive subconcussive head impact exposure that can be used to understand injury mechanisms and tolerance in the human. This study incorporated the Medical College of Wisconsin Rotational Injury Model to expose rats to multiple low-level head accelerations per day over a 4-week period. The peak magnitude of head accelerations were scaled from our prior human studies of contact sport athletes and the number of exposures per day were based on the median (moderate exposure) and 95th percentile (high exposure) number of exposures per day across the human sample. Following the exposure protocol, rats were assessed for cognitive deficits, emotional changes, blood serum levels of axonal injury biomarkers, and histopathological evidence of injury. High exposure rats demonstrated cognitive deficits and evidence of anxiety-like behaviors relative to shams. Moderate exposure rats did not demonstrate either of those behaviors. Similarly, high exposure rats had histopathological evidence of gliosis [i.e., elevated Iba1 intensity and glial fibrillary acidic protein (GFAP) volume relative to shams] in the basolateral amygdala and other areas. Blood serum levels of neurofilament light (NFL) demonstrated a dose response relationship with increasing numbers of low-level head acceleration exposures with a higher week-to-week rate of NFL increase for the high exposure group compared to the moderate exposure group. These findings demonstrate a cumulative effect of repeated low-level head accelerations and provide a model that can be used in future studies to better understand mechanisms and tolerance for brain injury resulting from repeated low-level head accelerations, with scalable biomechanics between the rat and human.

Repeated blast mild traumatic brain injury and oxycodone self-administration produce interactive effects on neuroimaging outcomes

Traumatic brain injury (TBI) and drug addiction are common comorbidities, but it is unknown if the neurological sequelae of TBI contribute to this relationship. We have previously reported elevated oxycodone seeking after drug self-administration in rats that received repeated blast TBI (rbTBI). TBI and exposure to drugs of abuse can each change structural and functional neuroimaging outcomes, but it is unknown if there are interactive effects of injury and drug exposure. To determine the effects of TBI and oxycodone exposure, we subjected rats to rbTBI and oxycodone self-administration and measured drug seeking and several neuroimaging measures. We found interactive effects of rbTBI and oxycodone on fractional anisotropy (FA) in the nucleus accumbens (NAc) and that FA in the medial prefrontal cortex (mPFC) was correlated with drug seeking. We also found an interactive effect of injury and drug on widespread functional connectivity and regional homogeneity of the blood oxygen level dependent (BOLD) response, and that intra-hemispheric functional connectivity in the infralimbic medial prefrontal cortex positively correlated with drug seeking. In conclusion, rbTBI and oxycodone self-administration had interactive effects on structural and functional magnetic resonance imaging (MRI) measures, and correlational effects were found between some of these measures and drug seeking. These data support the hypothesis that TBI and opioid exposure produce neuroadaptations that contribute to addiction liability.

Opportunities for Prevention of Concussion and Repetitive Head Impact Exposure in College Football Players: A Concussion Assessment, Research, and Education (CARE) Consortium Study

Importance

Concussion ranks among the most common injuries in football. Beyond the risks of concussion are growing concerns that repetitive head impact exposure (HIE) may increase risk for long-term neurologic health problems in football players.

Objective

To investigate the pattern of concussion incidence and HIE across the football season in collegiate football players.

Design, Setting, and Participants

In this observational cohort study conducted from 2015 to 2019 across 6 Division I National Collegiate Athletic Association (NCAA) football programs participating in the Concussion Assessment, Research, and Education (CARE) Consortium, a total of 658 collegiate football players were instrumented with the Head Impact Telemetry (HIT) System (46.5% of 1416 eligible football players enrolled in the CARE Advanced Research Core). Players were prioritized for instrumentation with the HIT System based on their level of participation (ie, starters prioritized over reserves).

Exposure

Participation in collegiate football games and practices from 2015 to 2019.

Main Outcomes and Measures

Incidence of diagnosed concussion and HIE from the HIT System.

Results

Across 5 seasons, 528 684 head impacts recorded from 658 players (all male, mean age [SD], 19.02 [1.25] years) instrumented with the HIT System during football practices or games met quality standards for analysis. Players sustained a median of 415 (interquartile range [IQR], 190-727) recorded head impacts (ie, impacts) per season. Sixty-eight players sustained a diagnosed concussion. In total, 48.5% of concussions (n = 33) occurred during preseason training, despite preseason representing only 20.8% of the football season (0.059 preseason vs 0.016 regular-season concussions per team per day; mean difference, 0.042; 95% CI, 0.020-0.060; P = .001). Total HIE in the preseason occurred at twice the proportion of the regular season (324.9 vs 162.4 impacts per team per day; mean difference, 162.6; 95% CI, 110.9-214.3; P < .001). Every season, HIE per athlete was highest in August (preseason) (median, 146.0 impacts; IQR, 63.0-247.8) and lowest in November (median, 80.0 impacts; IQR, 35.0-148.0). Over 5 seasons, 72% of concussions (n = 49) (game proportion, 0.28; 95% CI, 0.18-0.40; P < .001) and 66.9% of HIE (262.4 practices vs 137.2 games impacts per player; mean difference, 125.3; 95% CI, 110.0-140.6; P < .001) occurred in practice. Even within the regular season, total HIE in practices (median, 175.0 impacts per player per season; IQR, 76.0-340.5) was 84.2% higher than in games (median, 95.0 impacts per player per season; IQR, 32.0-206.0).

Conclusions and Relevance

Concussion incidence and HIE among college football players are disproportionately higher in the preseason than regular season, and most concussions and HIE occur during football practices, not games. These data point to a powerful opportunity for policy, education, and other prevention strategies to make the greatest overall reduction in concussion incidence and HIE in college football, particularly during preseason training and football practices throughout the season, without major modification to game play. Strategies to prevent concussion and HIE have important implications to protecting the safety and health of football players at all competitive levels.

Repeated blast model of mild traumatic brain injury alters oxycodone self-administration and drug seeking

Each year, traumatic brain injuries (TBI) affect millions worldwide. Mild TBIs (mTBI) are the most prevalent and can lead to a range of neurobehavioral problems, including substance abuse. A single blast exposure, inducing mTBI alters the medial prefrontal cortex, an area implicated in addiction, for at least 30 days post injury in rats. Repeated blast exposures result in greater physiological and behavioral dysfunction than single exposure; however, the impact of repeated mTBI on addiction is unknown. In this study, the effect of mTBI on various stages of oxycodone use was examined. Male Sprague Dawley rats were exposed to a blast model of mTBI once per day for 3 days. Rats were trained to self-administer oxycodone during short (2 h) and long (6 h) access sessions. Following abstinence, rats underwent extinction and two cued reinstatement sessions. Sham and rbTBI rats had similar oxycodone intake, extinction responding and cued reinstatement of drug seeking. A second group of rats were trained to self-administer oxycodone with varying reinforcement schedules (fixed ratio (FR)-2 and FR-4). Under an FR-2 schedule, rbTBI-exposed rats earned fewer reinforcers than sham-exposed rats. During 10 extinction sessions, the rbTBI-exposed rats exhibited significantly more seeking for oxycodone than the sham-injured rats. There was a positive correlation between total oxycodone intake and day 1 extinction drug seeking in sham, but not in rbTBI-exposed rats. Together, this suggests that rbTBI-exposed rats are more sensitive to oxycodone-associated cues during reinstatement than sham-exposed rats and that rbTBI may disrupt the relationship between oxycodone intake and seeking.

Comparison of Head Impact Exposure Between Concussed Football Athletes and Matched Controls: Evidence for a Possible Second Mechanism of Sport-Related Concussion

Studies of football athletes have implicated repetitive head impact exposure in the onset of cognitive and brain structural changes, even in the absence of diagnosed concussion. Those studies imply accumulating damage from successive head impacts reduces tolerance and increases risk for concussion. Support for this premise is that biomechanics of head impacts resulting in concussion are often not remarkable when compared to impacts sustained by athletes without diagnosed concussion. Accordingly, this analysis quantified repetitive head impact exposure in a cohort of 50 concussed NCAA Division I FBS college football athletes compared to controls that were matched for team and position group. The analysis quantified the number of head impacts and risk weighted exposure both on the day of injury and for the season to the date of injury. 43% of concussed athletes had the most severe head impact exposure on the day of injury compared to their matched control group and 46% of concussed athletes had the most severe head impact exposure for the season to the date of injury compared to their matched control group. When accounting for date of injury or season to date of injury, 72% of all concussed athletes had the most or second most severe head impact exposure compared to their matched control group. These trends associating cumulative head impact exposure with concussion onset were stronger for athletes that participated in a greater number of contact activities. For example, 77% of athletes that participated in ten or more days of contact activities had greater head impact exposure than their matched control group. This unique analysis provided further evidence for the role of repetitive head impact exposure as a predisposing factor for the onset of concussion. The clinical implication of these findings supports contemporary trends of limiting head impact exposure for college football athletes during practice activities in an effort to also reduce risk of concussive injury.

Biomechanical tolerance of whole lumbar spines in straightened posture subjected to axial acceleration

Quantification of biomechanical tolerance is necessary for injury prediction and protection of vehicular occupants. This study experimentally quantified lumbar spine axial tolerance during accelerative environments simulating a variety of military and civilian scenarios. Intact human lumbar spines (T12-L5) were dynamically loaded using a custom-built drop tower. Twenty-three specimens were tested at sub-failure and failure levels consisting of peak axial forces between 2.6 and 7.9 kN and corresponding peak accelerations between 7 and 57 g. Military aircraft ejection and helicopter crashes fall within these high axial acceleration ranges. Testing was stopped following injury detection. Both peak force and acceleration were significant (p < 0.0001) injury predictors. Injury probability curves using parametric survival analysis were created for peak acceleration and peak force. Fifty-percent probability of injury (95%CI) for force and acceleration were 4.5 (3.9-5.2 kN), and 16 (13-19 g). A majority of injuries affected the L1 spinal level. Peak axial forces and accelerations were greater for specimens that sustained multiple injuries or injuries at L2-L5 spinal levels. In general, force-based tolerance was consistent with previous shorter-segment lumbar spine testing (3-5 vertebrae), although studies incorporating isolated vertebral bodies reported higher tolerance attributable to a different injury mechanism involving structural failure of the cortical shell. This study identified novel outcomes with regard to injury patterns, wherein more violent exposures produced more injuries in the caudal lumbar spine. This caudal migration was likely attributable to increased injury tolerance at lower lumbar spinal levels and a faster inertial mass recruitment process for high rate load application. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. J Orthop Res 36:1747-1756, 2018.

Acute death of astrocytes in blast-exposed rat organotypic hippocampal slice cultures

Blast traumatic brain injury (bTBI) affects civilians, soldiers, and veterans worldwide and presents significant health concerns. The mechanisms of neurodegeneration following bTBI remain elusive and current therapies are largely ineffective. It is important to better characterize blast-evoked cellular changes and underlying mechanisms in order to develop more effective therapies. In the present study, our group utilized rat organotypic hippocampal slice cultures (OHCs) as an in vitro system to model bTBI. OHCs were exposed to either 138 ± 22 kPa (low) or 273 ± 23 kPa (high) overpressures using an open-ended helium-driven shock tube, or were assigned to sham control group. At 2 hours (h) following injury, we have characterized the astrocytic response to a blast overpressure. Immunostaining against the astrocytic marker glial fibrillary acidic protein (GFAP) revealed acute shearing and morphological changes in astrocytes, including clasmatodendrosis. Moreover, overlap of GFAP immunostaining and propidium iodide (PI) indicated astrocytic death. Quantification of the number of dead astrocytes per counting area in the hippocampal cornu Ammonis 1 region (CA1), demonstrated a significant increase in dead astrocytes in the low- and high-blast, compared to sham control OHCs. However only a small number of GFAP-expressing astrocytes were co-labeled with the apoptotic marker Annexin V, suggesting necrosis as the primary type of cell death in the acute phase following blast exposure. Moreover, western blot analyses revealed calpain mediated breakdown of GFAP. The dextran exclusion additionally indicated membrane disruption as a potential mechanism of acute astrocytic death. Furthermore, although blast exposure did not evoke significant changes in glutamate transporter 1 (GLT-1) expression, loss of GLT-1-expressing astrocytes suggests dysregulation of glutamate uptake following injury. Our data illustrate the profound effect of blast overpressure on astrocytes in OHCs at 2 h following injury and suggest increased calpain activity and membrane disruption as potential underlying mechanisms.

Finite Element Study of a Lumbar Intervertebral Disc Nucleus Replacement Device

Nucleus replacement technologies are a minimally invasive alternative to spinal fusion and total disc replacement that have the potential to reduce pain and restore motion for patients with degenerative disc disease. Finite element modeling can be used to determine the biomechanics associated with nucleus replacement technologies. The current study focuses on a new nucleus replacement device designed as a conforming silicone implant with an internal void. A validated finite element model of the human lumbar L3-L4 motion segment was developed and used to investigate the influence of the nucleus replacement device on spine biomechanics. In addition, the effect of device design changes on biomechanics was determined. A 3D, L3-L4 finite element model was constructed from medical imaging data. Models were created with the normal intact nucleus, the nucleus replacement device, and a solid silicone implant. Probabilistic analysis was performed on the normal model to provide quantitative validation metrics. Sensitivity analysis was performed on the silicone Shore A durometer of the device. Models were loaded under axial compression followed by flexion/extension, lateral bending, or axial rotation. Compressive displacement, endplate stresses, reaction moment, and annulus stresses were determined and compared between the different models. The novel nucleus replacement device resulted in similar compressive displacement, endplate stress, and annulus stress and slightly higher reaction moment compared with the normal nucleus. The solid implant resulted in decreased displacement, increased endplate stress, decreased annulus stress, and decreased reaction moment compared with the novel device. With increasing silicone durometer, compressive displacement decreased, endplate stress increased, reaction moment increased, and annulus stress decreased. Finite element analysis was used to show that the novel nucleus replacement device results in similar biomechanics compared with the normal intact nucleus.

Lumbar spine endplate fractures: Biomechanical evaluation and clinical considerations through experimental induction of injury

Lumbar endplate fractures were investigated in different experimental scenarios, however the biomechanical effect of segmental alignment was not outlined. The objectives of this study were to quantify effects of spinal orientation on lumbar spine injuries during single-cycle compressive loads and understand lumbar spine endplate injury tolerance. Twenty lumbar motion segments were compressed to failure. Two methods were used in the preparation of the lumbar motion segments. Group 1 (n = 7) preparation maintained pre-test sagittal lordosis, whereas Group 2 (n = 13) specimens had a free-rotational end condition for the cranial vertebra, allowing sagittal rotation of the cranial vertebra to create parallel endplates. Five Group 1 specimens experienced posterior vertebral body fracture prior to endplate fracture, whereas two sustained endplate fracture only. Group 2 specimens sustained isolated endplate fractures. Group 2 fractures occurred at approximately 41% of the axial force required for Group 1 fracture (p < 0.05). Imaging and specimen dissection indicate endplate injury consistently took place within the confines of the endplate boundaries, away from the vertebral periphery. These findings indicate that spinal alignment during compressive loading influences the resulting injury pattern. This investigation identified the specific mechanical conditions under which an endplate breach will take place. Development of endplate injuries has significant clinical implication as previous research identified internal disc disruption (IDD) and degenerative disc disease (DDD) as long-term consequences of the axial load-shift that occurs following a breach of the endplate. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1084-1091, 2016.

Behavioral Outcomes Differ between Rotational Acceleration and Blast Mechanisms of Mild Traumatic Brain Injury

Mild traumatic brain injury (mTBI) can result from a number of mechanisms, including blunt impact, head rotational acceleration, exposure to blast, and penetration of projectiles. Mechanism is likely to influence the type, severity, and chronicity of outcomes. The objective of this study was to determine differences in the severity and time course of behavioral outcomes following blast and rotational mTBI. The Medical College of Wisconsin (MCW) Rotational Injury model and a shock tube model of primary blast injury were used to induce mTBI in rats and behavioral assessments were conducted within the first week, as well as 30 and 60 days following injury. Acute recovery time demonstrated similar increases over protocol-matched shams, indicating acute injury severity equivalence between the two mechanisms. Post-injury behavior in the elevated plus maze demonstrated differing trends, with rotationally injured rats acutely demonstrating greater activity, whereas blast-injured rats had decreased activity that developed at chronic time points. Similarly, blast-injured rats demonstrated trends associated with cognitive deficits that were not apparent following rotational injuries. These findings demonstrate that rotational and blast injury result in behavioral changes with different qualitative and temporal manifestations. Whereas rotational injury was characterized by a rapidly emerging phenotype consistent with behavioral disinhibition, blast injury was associated with emotional and cognitive differences that were not evident acutely, but developed later, with an anxiety-like phenotype still present in injured animals at our most chronic measurements.

Effects of acceleration level on lumbar spine injuries in military populations

BACKGROUND CONTEXT

Clinical studies have indicated that thoracolumbar trauma occurs in the civilian population at its junction. In contrast, injury patterns in military populations indicate a shift to the inferior vertebral levels of the lumbar spine. Controlled studies offering an explanation for such migrations and the associated clinical biomechanics are sparse in literature.

PURPOSE

The goals of this study were to investigate the potential roles of acceleration loading on the production of injuries and their stability characteristics using a human cadaver model for applications to high-speed aircraft ejection and helicopter crashes.

STUDY DESIGN

Biomechanical laboratory study using unembalmed human cadaver lumbar spinal columns.

METHODS

Thoracolumbar columns from post-mortem human surrogates were procured, x-rays taken, intervertebral joints and bony components evaluated for degeneration, and fixed using polymethylmethacrylate. The inferior end was attached to a platform via a load cell and uniaxial accelerometer. The superior end was attached to the upper metal platform via a semi-circular cylinder. The pre-flexed specimen was preloaded to simulate torso mass. The ends of the platform were connected to the vertical post of a custom-designed drop tower. The specimen was dropped inducing acceleration loading to the column. Axial force and acceleration data were gathered at high sampling rates, filtered, and peak accelerations and inertia-compensated axial forces were obtained during the loading phase. Computed tomography images were used to identify and classify injuries using the three-column concept (stable vs. unstable trauma).

RESULTS

The mean age, total body mass, and stature of the five healthy degeneration-free specimens were 42 years, 73 kg, and 167 cm. The first two specimens subjected to peak accelerations of approximately 200 m/sec(2) were classified as belonging to high-speed aircraft ejection-type and the other three specimens subjected to greater amplitudes (347-549 m/sec(2)) were classified as belonging to helicopter crash-type loadings. Peak axial forces for all specimens ranged from 4.8 to 7.2 kN. Ejection-type loaded specimens sustained single-level injuries to the L1 vertebra; one injury was stable and the other was unstable. Helicopter crash-type loaded specimens sustained injuries at inferior levels, including bilateral facet dislocation at L4-L5 and L2-L4 compression fractures, and all specimens were considered unstable at least at one spinal level.

CONCLUSIONS

These findings suggest that the severity of spinal injuries increase with increasing acceleration levels and, more importantly, injuries shift inferiorly from the thoracolumbar junction to lower lumbar levels. Acknowledging that the geometry and load carrying capacity of vertebral bodies increase in the lower lumbar spine, involvement of inferior levels in trauma sparing the superior segments at greater acceleration inputs agree with military literature of caudal shift in injured levels. The present study offers an experimental explanation for the clinically observed caudal migration of spinal trauma in military populations as applied to high-speed aircraft ejection catapult and helicopter crashes.

Voluntary Alcohol Intake following Blast Exposure in a Rat Model of Mild Traumatic Brain Injury

Alcoholism is a frequent comorbidity following mild traumatic brain injury (mTBI), even in patients without a previous history of alcohol dependence. Despite this correlational relationship, the extent to which the neurological effects of mTBI contribute to the development of alcoholism is unknown. In this study, we used a rodent blast exposure model to investigate the relationship between mTBI and voluntary alcohol drinking in alcohol naïve rats. We have previously demonstrated in Sprague Dawley rats that blast exposure leads to microstructural abnormalities in the medial prefrontal cortex (mPFC) and other brain regions that progress from four to thirty days. The mPFC is a brain region implicated in alcoholism and drug addiction, although the impact of mTBI on drug reward and addiction using controlled models remains largely unexplored. Alcohol naïve Sprague Dawley rats were subjected to a blast model of mTBI (or sham conditions) and then tested in several common measures of voluntary alcohol intake. In a seven-week intermittent two-bottle choice alcohol drinking test, sham and blast exposed rats had comparable levels of alcohol intake. In a short access test session at the conclusion of the two-bottle test, blast rats fell into a bimodal distribution, and among high intake rats, blast treated animals had significantly elevated intake compared to shams. We found no effect of blast when rats were tested for an alcohol deprivation effect or compulsive drinking in a quinine adulteration test. Throughout the experiment, alcohol drinking was modest in both groups, consistent with other studies using Sprague Dawley rats. In conclusion, blast exposure had a minimal impact on overall alcohol intake in Sprague Dawley rats, although intake was increased in a subpopulation of blast animals in a short access session following intermittent access exposure.

Effects of blast overpressure on neurons and glial cells in rat organotypic hippocampal slice cultures

Due to recent involvement in military conflicts, and an increase in the use of explosives, there has been an escalation in the incidence of blast-induced traumatic brain injury (bTBI) among US military personnel. Having a better understanding of the cellular and molecular cascade of events in bTBI is prerequisite for the development of an effective therapy that currently is unavailable. The present study utilized organotypic hippocampal slice cultures (OHCs) exposed to blast overpressures of 150 kPa (low) and 280 kPa (high) as an in vitro bTBI model. Using this model, we further characterized the cellular effects of the blast injury. Blast-evoked cell death was visualized by a propidium iodide (PI) uptake assay as early as 2 h post-injury. Quantification of PI staining in the cornu Ammonis 1 and 3 (CA1 and CA3) and the dentate gyrus regions of the hippocampus at 2, 24, 48, and 72 h following blast exposure revealed significant time dependent effects. OHCs exposed to 150 kPa demonstrated a slow increase in cell death plateauing between 24 and 48 h, while OHCs from the high-blast group exhibited a rapid increase in cell death already at 2 h, peaking at ~24 h post-injury. Measurements of lactate dehydrogenase release into the culture medium also revealed a significant increase in cell lysis in both low- and high-blast groups compared to sham controls. OHCs were fixed at 72 h post-injury and immunostained for markers against neurons, astrocytes, and microglia. Labeling OHCs with PI, neuronal, and glial markers revealed that the blast-evoked extensive neuronal death and to a lesser extent loss of glial cells. Furthermore, our data demonstrated activation of astrocytes and microglial cells in low- and high-blasted OHCs, which reached a statistically significant difference in the high-blast group. These data confirmed that our in vitro bTBI model is a useful tool for studying cellular and molecular changes after blast exposure.

Characterization of Lumbar Spine Annular Disruption in PMHS Using MRI, Cryomicrotomy and Histology Techniques

Internal intervertebral disc disruption is involved in the onset of a wide range of spinal dysfunction, ultimately affecting not only the disc itself but the surrounding osseous and neural structures as well. The ability of disc to withstand and effectively distribute axial load is dependent upon whether peripherally located annular fibers provide the support necessary to contain and corral the pressure sensitive nucleus. Any alteration in the structures immediate to the nucleus jeopardize this ability. While annular tears and fissures have been thoroughly investigated, one form of internal disc disruption is less well-understood. A network of elastin cross-bridges provides resistance to delamination of the collagenous sheets that comprise the annulus. The current investigation utilized a Nitrogen gas-induced pressure mechanism to disrupt elastin cross links that exist between annular lamellae. Twenty five cadaveric lumbar spine motion segments (mean age: 52±12 yr.) were subjected to the annular disruption protocol. Damage to the annulus was assessed using MRI, cryomicrotome and histological staining procedures. MRI images were compared to cryomicrotome images to determine the ability of standard clinical MRI scans to determine annular damage. In many cases MRI was moderately revealing in terms of damage. Future studies will quantify biomechanical consequences of these low level annular disruptions relative to segmental stability.

Head rotational acceleration characteristics influence behavioral and diffusion tensor imaging outcomes following concussion

A majority of traumatic brain injuries (TBI) in motor vehicle crashes and sporting environments are mild and caused by high-rate acceleration of the head. For injuries caused by rotational acceleration, both magnitude and duration of the acceleration pulse were shown to influence injury outcomes. This study incorporated a unique rodent model of rotational acceleration-induced mild TBI (mTBI) to quantify independent effects of magnitude and duration on behavioral and neuroimaging outcomes. Ninety-two Sprague-Dawley rats were exposed to head rotational acceleration at peak magnitudes of 214 or 350 krad/s(2) and acceleration pulse durations of 1.6 or 3.4 ms in a full factorial design. Rats underwent a series of behavioral tests including the Composite Neuroscore (CN), Elevated Plus Maze (EPM), and Morris Water Maze (MWM). Ex vivo diffusion tensor imaging (DTI) of the fixed brains was conducted to assess the effects of rotational injury on brain microstructure as revealed by the parameter fractional anisotropy (FA). While the injury did not cause significant locomotor or cognitive deficits measured with the CN and MWM, respectively, a main effect of duration was consistently observed for the EPM. Increased duration caused significantly greater activity and exploratory behaviors measured as open arm time and number of arm changes. DTI demonstrated significant effects of both magnitude and duration, with the FA of the amygdala related to both the magnitude and duration. Increased duration also caused FA changes at the interface of gray and white matter. Collectively, the findings demonstrate that the consequences of rotational acceleration mTBI were more closely associated with duration of the rotational acceleration impulse, which is often neglected as an independent factor, and highlight the need for animal models of TBI with strong biomechanical foundations to associate behavioral outcomes with brain microstructure.

Mechanical yield of the lumbar annulus: a possible contributor to instability: Laboratory investigation

OBJECT

Segmental instability in the lumbar spine can result from a number of mechanisms including intervertebral disc degeneration and facet joint degradation. Under traumatic circumstances, elevated loading may lead to mechanical yield of the annular fibers, which can decrease load-carrying capacity and contribute to instability. The purpose of this study was to quantify the biomechanics of intervertebral annular yield during tensile loading with respect to spinal level and anatomical region within the intervertebral disc.

METHODS

This laboratory-based study incorporated isolated lumbar spine annular specimens from younger and normal or mildly degenerated intervertebral discs. Specimens were quasi-statically distracted to failure in an environmentally controlled chamber. Stress and strain associated with yield and ultimate failure were quantified, as was stiffness in the elastic and postyield regions. Analysis of variance was used to determine statistically significant differences based on lumbar spine level, radial position, and anatomical region of the disc.

RESULTS

Annular specimens demonstrated a nonlinear response consisting of the following: toe region, linear elastic region, yield point, postyield region, and ultimate failure point. Regional dependency was identified between deep and superficial fibers. Mechanical yield was evident prior to ultimate failure in 98% of the specimens and occurred at approximately 80% and 74% of the stress and strain, respectively, to ultimate failure. Fiber modulus decreased by 34% following yield.

CONCLUSIONS

Data in this study demonstrated that yielding of intervertebral disc fibers occurs relatively early in the mechanical response of the tissues and that stiffness is considerably decreased following yield. Therefore, yielding of annular fibers may result in decreased segmental stability, contributing to accelerated degeneration of bony components and possible idiopathic pain.

Biomechanics of concussion

This report provides an overview of the biomechanics associated with mild traumatic brain injury (TBI), also known as concussion. Specifically, the role of angular acceleration in modulating concussion onset and severity is highlighted. Studies conducted and published from the 1960s to the 1980s provided initial estimates for TBI tolerance due to high rate head rotation. However, injury levels in those studies were more severe than what is considered to be concussion in the contemporary environment. Therefore, this issue deserves additional attention to provide quantitative estimates for concussive tolerance due to head rotational acceleration focusing on the types of clinical outcomes described today. Likewise, concussion in military personnel has notably increased in current conflicts due to the incorporation of improvised explosive devices and roadside bombs. Clinical evidence indicates that outcomes from concussion due to blast may be quite different from those due to head rotational acceleration. This report also provides an overview of blast concussion mechanisms and highlights some of the recent preclinical work in this area. As with head rotational acceleration, blast tolerance is necessary to understand the scope of this problem, better protect these personnel, and provide more informed return-to-duty guidelines for service members.

Sensitivity and stability analysis of a nonlinear material model of cervical intervertebral disc under cyclic loads using the finite element method

It is known that the human spine exhibits non-linear behavior, and its intervertebral discs play a role in the mechanism of internal load transfer. It is important to simulate its nonlinear behavior in computational models for better delineation of intrinsic responses, especially during cyclic loading activities, a mode pertinent to civilian and military populations. For developing a robust “material model” of the disc, this study used experimental tensile-compressive cyclic loading responses from four human cadaver cervical functional spinal units. Disc deformations were measured using an ultrasound system at 42 samples per second. Using experimental data, a three-network non-linear “material model” was developed using an optimization procedure and finite-element analysis. The model used 12 parameters to capture loading and unloading in tension and compression, including hysteresis. A sensitivity analysis performed to test the robustness of the “material model” indicated that seven of the 12 parameters were sensitive to tension, compressive, or both loading modes. Stability analysis was also performed under nine different loading conditions. The developed “material model” is robust and stable to capture intervertebral disc responses in tensile-compressive cyclic loading and can be used in future finite-element models.

A method for inducing and determining biomechanics associated with endplate fractures in the lumbar spine

Lumbar spine endplate fracture is not easily detectible using medical imaging, but can lead to pain symptoms. Understanding endplate fracture mechanics can lead to more informed clinical diagnosis and more appropriate safety enhancements for civilian and military vehicles. Lumbar motion segments obtained from PMHS were prepared using two methods. Group 1 (n=6) was potted preserving the natural segmental lordosis while Group 2 (n=4) removed the curvature. Specimens were compressed at 0.5 mm/sec until fracture, observed via real-time fluoroscopy video as radio-opaque dye transferred from the intervertebral disc nucleus into the vertebral body. Fracture was confirmed using CT and dissection. Force, bony acoustics and disc pressure were correlates of fracture. Fractures in Group 1 (5 of 6 specimens) were concentrated in the posterior cortex of the inferior vertebral body whereas Group 2 experienced endplate fractures. The mean sagittal plane angle between endplates for specimens with cortical fracture was 5.1±1.2 degrees, compared to 1.0±0.5 degrees for endplate fracture. The average peak force for cortical fracture was 10.0±1.9 kN and 4.5±0.8 kN for endplate fracture. Pre-positioning during compressive loading has a significant role in determining whether a motion segment sustains a cortical or endplate fracture. Likewise, an appropriately oriented segment can sustain endplate fracture at approximately 45% of the load for cortex fracture.

Primary blast traumatic brain injury in the rat: relating diffusion tensor imaging and behavior

The incidence of traumatic brain injury (TBI) among military personnel is at its highest point in U.S. history. Experimental animal models of blast have provided a wealth of insight into blast injury. The mechanisms of neurotrauma caused by blast, however, are still under debate. Specifically, it is unclear whether the blast shockwave in the absence of head motion is sufficient to induce brain trauma. In this study, the consequences of blast injury were investigated in a rat model of primary blast TBI. Animals were exposed to blast shockwaves with peak reflected overpressures of either 100 or 450 kPa (39 and 110 kPa incident pressure, respectively) and subsequently underwent a battery of behavioral tests. Diffusion tensor imaging (DTI), a promising method to detect blast injury in humans, was performed on fixed brains to detect and visualize the spatial dependence of blast injury. Blast TBI caused significant deficits in memory function as evidenced by the Morris Water Maze, but limited emotional deficits as evidenced by the Open Field Test and Elevated Plus Maze. Fractional anisotropy, a metric derived from DTI, revealed significant brain abnormalities in blast-exposed animals. A significant relationship between memory deficits and brain microstructure was evident in the hippocampus, consistent with its role in memory function. The results provide fundamental insight into the neurological consequences of blast TBI, including the evolution of injury during the sub-acute phase and the spatially dependent pattern of injury. The relationship between memory dysfunction and microstructural brain abnormalities may provide insight into the persistent cognitive difficulties experienced by soldiers exposed to blast neurotrauma and may be important to guide therapeutic and rehabilitative efforts.

Cervical spine injury biomechanics: Applications for under body blast loadings in military environments

BACKGROUND

While cervical spine injury biomechanics reviews in motor vehicle and sports environments are available, there is a paucity of studies in military loadings. This article presents an analysis on the biomechanics and applications of cervical spine injury research with an emphasis on human tolerance for underbody blast loadings in the military.

METHODS

Following a brief review of published military studies on the occurrence and identification of field trauma, postmortem human subject investigations are described using whole body, intact head-neck complex, osteo-ligamentous cervical spine with head, subaxial cervical column, and isolated segments subjected to differing types of dynamic loadings (electrohydraulic and pendulum impact devices, free-fall drops).

FINDINGS

Spine injuries have shown an increasing trend over the years, explosive devices are one of the primary causal agents and trauma is attributed to vertical loads. Injuries, mechanisms and tolerances are discussed under these loads. Probability-based injury risk curves are included based on loading rate, direction and age.

INTERPRETATION

A unique advantage of human cadaver tests is the ability to obtain fundamental data to delineate injury biomechanics and establish human tolerance and injury criteria. Definitions of tolerances of the spine under vertical loads based on injuries have implications in clinical and biomechanical applications. Primary outputs such as forces and moments can be used to derive secondary variables such as the neck injury criterion. Implications are discussed for designing anthropomorphic test devices that may be used to predict injuries in underbody blast environments and improve the safety of military personnel.

Biomechanics of human thoracolumbar spinal column trauma from vertical impact loading

Recent studies suggest that dorsal spine injuries occur in motor vehicle crashes to restrained occupants. Compression/compression-flexion injuries occur in frontal crashes due to seat pan and vertical loading. While injuries, mechanisms and tolerances for neck injuries have been determined, thoraco-lumbar spine data are very limited. The objective of the study was to determine the biomechanical characteristics associated with such spinal injuries due to vertical loading. Upper thoracic (T2-T6), lower thoracic (T7-T11) and lumbar (T12-L5) columns from post mortem human surrogates were procured, fixed at the ends and dropped from three heights: the first two impacts designed as non-failure tests and the final was the failure test. Intermittent evaluations consisted of palpations and x-rays. Injuries were assessed using posttest x-rays and computed tomography scans. The age, stature, total body mass and body mass index of three PMHS were: 50 years, 164 cm, 66.9 kg, and 24.7 kg/m(2). The mean peak forces from 24 tests for the upper and lower thoracic and lumbar spines for varying drop heights ranged from 1.6 to 4.3, 1.3 to 5.1, and 1.3 to 6.7 kN, respectively. All peak forces increased with increasing drop heights. Injuries to the three spines included unstable vertebral body and posterior element (bipedicular and lamina) compression fractures and posterior complex disruptions. Logistic regression analysis indicated that peak forces of 3.4 and 3.7 kN are associated with 50% probability of fracture. These results indicate the initial tolerance limits of dorsal spines under vertical loading.

Toward optimal early management after whiplash injury to lessen the rate of transition to chronicity: discussion paper 5

STUDY DESIGN

Expert debate and synthesis of research to inform future management approaches for acute whiplash disorders.

OBJECTIVE

To identify a research agenda toward improving outcomes for acute whiplash-injured individuals to lessen the incidence of transition to chronicity.

SUMMARY OF BACKGROUND DATA

International figures are concordant, estimating that 50% of individuals recover from pain and disability within 3 to 6 months of a whiplash injury. The remainder report continuing symptoms up to 1 to 2 years or longer postinjury. As no management approach to date has improved recovery rates, new clinical/research directions are required for early management of whiplash-injured patients.

METHODS

A group of multidisciplinary researchers critically debated evidence and current research concerning whiplash from biological, psychological, and social perspectives toward informing future research directions for management of acute whiplash.

RESULTS

It was recognized that effective treatments for acute whiplash are constrained by a limited understanding of causes of whiplash-associated disorders. Acute whiplash presentations are heterogeneous leading to the proposal that a research priority was development of a triage system based on modifiable prognostic indicators and clinical features to better inform individualized early management decisions. Other priorities identified included researching effective early pain management for individuals presenting with moderate to high levels of pain; development of best education/information for acute whiplash; testing the efficacy of stratified and individualized rehabilitation, researching modes of delivery considering psychosocial modulators of pain and disability; and the timing, nature, and mode of delivery of cognitive-behavioral therapies. Directions were highlighted for future biomechanical research into injury prevention.

CONCLUSION

The burden of whiplash injuries, the high rate of transition to chronicity, and evidence of limited effects of current management on transition rates demand new directions in evaluation and management. Several directions have been proposed for future research, which reflect the potential multifaceted dimensions of an acute whiplash disorder.

A New PMHS Model for Lumbar Spine Injuries During Vertical Acceleration

Ejection from military aircraft exerts substantial loads on the lumbar spine. Fractures remain common, although the overall survivability of the event has considerably increased over recent decades. The present study was performed to develop and validate a biomechanically accurate experimental model for the high vertical acceleration loading to the lumbar spine that occurs during the catapult phase of aircraft ejection. The model consisted of a vertical drop tower with two horizontal platforms attached to a monorail using low friction linear bearings. A total of four human cadaveric spine specimens (T12-L5) were tested. Each lumbar column was attached to the lower platform through a load cell. Weights were added to the upper platform to match the thorax, head-neck, and upper extremity mass of a 50th percentile male. Both platforms were raised to the drop height and released in unison. Deceleration characteristics of the lower platform were modulated by foam at the bottom of the drop tower. The upper platform applied compressive inertial loads to the top of the specimen during deceleration. All specimens demonstrated complex bending during ejection simulations, with the pattern dependent upon the anterior-posterior location of load application. The model demonstrated adequate inter-specimen kinematic repeatability on a spinal level-by-level basis under different subfailure loading scenarios. One specimen was then exposed to additional tests of increasing acceleration to induce identifiable injury and validate the model as an injury-producing system. Multiple noncontiguous vertebral fractures were obtained at an acceleration of 21 g with 488 g/s rate of onset. This clinically relevant trauma consisted of burst fracture at L1 and wedge fracture at L4. Compression of the vertebral body approached 60% during the failure test, with -6,106 N axial force and 168 Nm flexion moment. Future applications of this model include developing a better understanding of the vertebral injury mechanism during pilot ejection and developing tolerance limits for injuries sustained under a variety of different vertical acceleration scenarios.

Biomechanical properties of human thoracic spine disc segments

BACKGROUND

The objective was to determine the age-dependent compressive and tensile properties of female and male thoracic spine segments using postmortem human subjects (PMHS).

MATERIALS AND METHODS

Forty-eight thoracic disc segments at T4-5, T6-7, T8-9, and T10-11 levels from 12 PMHS T3-T11 spinal columns were divided into groups A and B based on specimen age and loaded in compression and tension. Stiffness and elastic modulus were computed. Stiffness was defined as the slope in the linear region of the force-displacement response. Elastic modulus was defined as the slope of the stress strain curve. Analysis of Variance (ANOVA) was used to determine significant differences (P<0.05) in the disc cross-sectional area, stiffness, and elastic modulus based on gender, spinal level, and group.

RESULTS

Specimen ages in group A (28 ± 8 years) were significantly lower than in group B (70 ± 7 years). Male discs had significantly greater area (7.2 ± 2.0 sq cm) than female discs (5.9 ± 1.8 sq cm). Tensile and compressive stiffness values were significantly different between the two age groups, but not between gender and level. Specimens in group A had greater tensile (486 ± 108 N/mm) and compressive (3300 ± 642 N/mm) stiffness values compared to group B specimens (tension: 397 ± 124 N/mm, compression: 2527 ± 734 N/mm). Tensile and compressive elastic modulus values depended upon age group and gender, but not on level. Group A specimens had significantly greater tensile and compressive moduli (2.9 ± 0.8 MPa, 19.5 ± 4.1 MPa) than group B specimens (1.7 ± 0.6 MPa, 10.6 ± 3.4 MPa). Female specimens showed significantly greater tensile and compressive moduli (2.6 ± 1.0 MPa, 16.6 ± 6.4 MPa) than male specimens (2.0 ± 0.7 MPa, 13.7 ± 5.0 MPa).

DISCUSSION

Using the two groups to represent "young" and "old" specimens, this study showed that the mechanical response decreases in older specimens, and the decrease is greater in compressive than distractive properties. While the decrease is expected, the relative change between the two modes of loading has not been reported. Another conclusion from the study is that the mechanical properties depend on gender, although not as decisive due to sample size.

An experimental study of chest compression during chiropractic manipulation of the thoracic spine using an anthropomorphic test device

PURPOSE

Chiropractic manipulation of the thoracic spine may induce chest deformations in the anterior-posterior direction. Yet, few studies have examined the biomechanical response of the chest associated with these manipulations. Consequently, an experimental analysis was undertaken to quantify chest compressions resulting from chiropractic thoracic spine manipulations and to estimate amount of risk for injury.

METHODS

A 2-part study approach was used with a Hybrid III anthropomorphic test dummy. In part 1, the dummy was positioned prone on a chiropractic table and subjected to thoracic spine manipulation by 2 experienced doctors of chiropractic. Chest compressions were quantified in the anterior-posterior direction. Manipulation forces were self-selected, with "typical" and "maximum" efforts examined. In part 2, the dummy was positioned beneath a force-instrumented mechanical piston device. Using the piston, chest compressions were induced with magnitudes identical to those recorded during chiropractic manipulation as well as magnitudes sufficient to induce injury. In all trials, force measurements were recorded.

RESULTS

Thoracic manipulations incorporating the typical and maximum efforts by the chiropractors resulted in maximum chest compressions attaining 1.8% and 4.5% of total chest depth, respectively. According to previously developed correlations between chest compression and injury severity defined using the Abbreviated Injury Scale (AIS), maximum chest compression measured during this study was only 22.7% of the compression required for greater than 10% risk of an AIS 1 injury. Abbreviated Injury Scale 1 level injuries are graded as minor severity and correspond to sternum contusion or fracture of a single rib.

CONCLUSIONS

Results from this preliminary study showed that maximum chest compression during thoracic spine manipulation corresponded to minimal risk of AIS 1 level injuries.

Upright magnetic resonance imaging measurement of prevertebral soft tissue in the cervical spine of normal volunteers

BACKGROUND CONTEXT

Anteroposterior width of prevertebral soft tissues (PVSTs) in the cervical spine has long been considered a valuable radiographic measurement for evaluation of occult cervical spine pathology. These measurements, generally obtained from lateral radiographs of the cervical spine, have been used clinically as references for the evaluation of patients with traumatic, neoplastic, or other cervical spine disorders. Magnetic resonance imaging (MRI) offers a subtle delineation of the soft-tissue structures anterior to the vertebral column, with the potential for more accurate and sensitive determination of PVST width. Upright magnetic resonance images permit comparison with and validation of previously reported upright lateral radiographic measurements of PVST width. To our knowledge, evaluation of cervical spine PVST width using upright MRI has not been previously published in the English literature.

PURPOSE

The purposes of this study were to validate lateral radiographic measurements of PVST width using upright weight-bearing MRI in healthy subjects and quantify effects of spinal level and gender.

STUDY DESIGN

Clinical study in asymptomatic volunteers.

METHODS

Eleven male and eight female volunteers consented and were enrolled in the study. All volunteers were asymptomatic and had no history of cervical spine injury or degenerative disease. Prevertebral soft-tissue width was measured at each cervical level from C2 to C7 using upright weight-bearing MRI. Statistically significant differences in PVST width based on spinal level and gender were determined using two-factor analysis of variance.

RESULTS

Width magnitudes were significantly dependent on gender (p<.0001) and spinal level (p<.0001). All C3 and C6 measurements were below the traditionally accepted values of 7 and 20 mm, respectively, that would be considered "abnormal." Prevertebral soft-tissue width was greater in men at upper and lower extents of the cervical spine. Prevertebral soft-tissue widths reported in the present study were similar in magnitude and level-by-level trends to measurements of asymptomatic volunteers obtained using lateral radiography.

CONCLUSION

The present study validated the use of lateral radiography to measure PVST width, presented level-by-level and gender-specific normative data, and provided a weighted statistical analysis of differences between normal volunteers and injured patients.

Axial head rotation increases facet joint capsular ligament strains in automotive rear impact

Axial head rotation prior to low speed automotive rear impacts has been clinically identified to increase morbidity and symptom duration. The present study was conducted to determine the effect of axial head rotation on facet joint capsule strains during simulated rear impacts. The study was conducted using a validated intact head to first thoracic vertebra (T1) computational model. Parametric analysis was used to assess effects of increasing axial head rotation between 0 and 60° and increasing impact severity between 8 and 24 km/h on facet joint capsule strains. Rear impacts were simulated by horizontally accelerating the T1 vertebra. Characteristics of the acceleration pulse were based on the horizontal T1 acceleration pulse from a series of simulated rear impact experiments using full-body post mortem human subjects. Joint capsule strain magnitudes were greatest in ipsilateral facet joints for all simulations incorporating axial head rotation (i.e., head rotation to the left caused higher ligament strain at the left facet joint capsule). Strain magnitudes increased by 47-196% in simulations with 60° head rotation compared to forward facing simulations. These findings indicate that axial head rotation prior to rear impact increases the risk of facet joint injury.

Incorporation of lower neck shear forces to predict facet joint injury risk in low-speed automotive rear impacts

Lower neck shear force remains a viable candidate for a low-velocity automotive rear-impact injury criterion. Data were previously reported to demonstrate high correlations between the magnitude of lower neck shear force and lower cervical spine facet joint motions. The present study determined the ability of lower neck shear force to predict soft-tissue injury risk in simulated automotive rear impacts. Rear-impact tests were conducted at two velocities and with two seatback orientations using a Hybrid III anthropomorphic test device (ATD) and stock automobile seats from 2007 model year vehicles. Higher velocities and more vertical seatback orientations were associated with higher injury risk based on computational modeling simulations performed in this study. Six cervical spine injury criteria including NIC, Nij, Nkm, LNL, and lower neck shear force and bending moment, increased with impact velocity. NIC, Nij, and shear force were most sensitive to changes in impact velocity. Four metrics, including Nkm, LNL, and lower neck shear force and bending moment, increased for tests with more vertical seatback orientations. Shear force was most sensitive to changes in seatback orientation. Peak values for shear force, NIC, and Nij occurred approximately at the time of head restraint contact for all four test conditions. Therefore, of the six investigated metrics, lower neck shear force was the only metric to demonstrate consistency with regard to injury risk and timing of peak magnitudes. These results demonstrate the ability of lower neck shear force to predict injury risk during low velocity automotive rear impacts and warrant continued investigation into the sensitivity and applicability of this metric for other rear-impact conditions.

Determination of low-pass filter cutoff frequencies for high-rate biomechanical signals obtained using videographic analysis

Diffuse brain injury (DBI) commonly results from blunt impact followed by sudden head rotation, wherein severity is a function of rotational kinematics. A noninvasive in vivo rat model was designed to further investigate this relationship. Due to brain mass differences between rats and humans, rotational acceleration magnitude indicative of rat DBI ( approximately 350 krad/s(2)) has been estimated as approximately 60 times greater than that of human DBI ( approximately 6 krad/s(2)). Prior experimental testing attempted to use standard transducers such as linear accelerometers to measure loading kinematics. However, such measurement techniques were intrusive to experimental model operation. Therefore, initial studies using this experimental model obtained rotational displacement data from videographic images and implemented a finite difference differentiation (FDD) method to obtain rotational velocity and acceleration. Unfortunately, this method amplified high-frequency, low-amplitude noise, which interfered with signal magnitude representation. Therefore, a coherent average technique was implemented to improve the measurement of rotational kinematics from videographic images, and its results were compared with those of the previous FDD method. Results demonstrated that the coherent method accurately determined a low-pass filter cutoff frequency specific to pulse characteristics. Furthermore, noise interference and signal attenuation were minimized compared with the FDD technique.

Physical effects of ejection on the head-neck complex: demonstration of a cadaver model

Vertebral fracture is the most common severe injury during high-speed pilot ejection. However, the loading paradigm experienced by pilots may also lead to soft-tissue spinal injuries that are more difficult to quantify and can lead to long-term deficits. This manuscript describes a new experimental protocol to simulate the effects of pilot ejection on the tissues of the head-neck complex. The model permits precise control of head-neck complex initial positioning, detailed analysis of head and spinal kinematics and upper and lower neck loads, and the ability to thoroughly investigate and identify soft-tissue injuries through upper and lower neck injury criteria, radiography, manual palpation, and cryomicrotomy. For the current test, peak acceleration of +14.8 Gz was similar to actual ejection events and duration of the acceleration pulse was approximately 100 ms. The specimen was oriented in flexion prior to initiation of inferior-to-superiorly directed acceleration. Subfailure ligamentum flavum injuries were sustained at the C4-C5 and C5-C6 cervical spinal levels and identified by increased segmental motions during the simulated ejection, increased laxity following testing, and cryomicrotomy. Upper and lower neck injury criteria did not predict these soft-tissue injuries. This experimental model can be used for detailed analysis of the effects of gender, head-neck orientation, helmet instrumentation, and acceleration pulse characteristics on cervical spine injury potential during pilot ejection events.

Normal coupling behavior between axial rotation and lateral bending in the lumbar spine - biomed 2009

Lumbar spine kinematics, a three-dimensional phenomenon, involves motion about a primary axis coupled with motions about secondary axes induced by posture and intervertebral joint structure. Due to the role of coupling in normal spinal mechanics, abnormal coupling magnitude and quality may indicate clinical instability. Although lumbar coupling was previously investigated, a definitive coupling relationship between axial rotation and lateral bending was not established. This study characterized normal coupling in younger specimens (33.8+/-11.1 yr) between axial rotation and lateral bending. Ten specimens (T12-S1) were loaded to 6 Nm in pure lateral bending and pure axial rotation. Stereophotogrammetry recorded three-dimensional kinematics and motion analysis computed level-by-level angulations. Motions were defined as primary lateral bending and coupled axial rotation during applied lateral bending moments, and primary axial rotation and coupled lateral bending during applied axial rotation moments. Primary lateral bending increased from 3.0 degrees at T12-L1 to 4.9 degrees at L4-L5, and reduced to 3.4 degrees at L5-S1. Coupled axial rotations decreased from 1.5 degrees at T12-L1 to 0.2 degrees at L5-S1, rotating contralateral to primary lateral bending for all segments, except L5-S1. Primary axial rotation increased in caudal segments, with a maximum of 1.4 degrees at L5-S1. Minimal coupled lateral bending occurred at cranial segments, with mean ipsilateral bending of 2.3 degrees at L4-S1. Level-dependent variations in coupled motion quality and quantity exist between axial rotation and lateral bending in normal lumbar spines. Cranial lumbar segments dominated coupled axial rotation while caudal segments demonstrated primarily coupled lateral bending. Variation from normal coupling patterns may indicate lumbar spine instability.

Population-based estimates of whiplash injury using nass cds data - biomed 2009

Clinical investigations identified occupant-related factors that may predispose specific populations to increased whiplash injury susceptibility. However, clinical studies represent a specific patient population and are not representative of the population at large. The present objective was to analyze nationally-representative data to assess the association between gender and whiplash in motor vehicle rear-end impacts. A cohort of front-seat occupants in rear impacts (5-7 o'clock) from 1998-2007 were acquired using the National Automotive Sampling System (NASS) Crashworthiness Data System database. Outcome measure was "cervical spine strain" without fracture or dislocation, coded as 640278.1. Differences between injured population proportions were analyzed using Chi-Square test of independence. 1,973 rear impacts were selected, representing 936,439 weighted crashes from across the United States. Females accounted for 69% of the weighted whiplash injuries, and the proportion of females sustaining whiplash was 10% higher than males. Furthermore, gender was associated with acquiring whiplash in rear impacts (odds ratio for females: 2.16; 95% confidence interval: 1.5-3.1). Although NASS data is inherently weighted toward more severe impacts (i.e., tow-away collisions), this population-based study has demonstrated increased female susceptibility to whiplash injury. The importance of gender suggests that specific safety measures for female front-seat occupants should be addressed separately from males.

Gender dependent cervical spine anatomical differences in size-matched volunteers - biomed 2009

The objective was to examine significant differences in the bony structure of cervical spine vertebrae based on gender and spinal level that may influence injury risk in women following automotive rear impact. Male and female subjects were recruited for a separate study and data from two subsets were selected for inclusion in this study. Subjects were size-matched based on sitting height (17 males, 11 females) and head circumference (9 males, 18 females). Axial CT scans were obtained of the cervical spine from the C1 through C6. Bony boundaries of cervical vertebrae were defined using image-analysis software and biomechanically-relevant dimensions were derived at spinal levels C2 through C6. Six of seven vertebral dimensions were significantly dependent upon gender and spinal level in both subgroups. Male vertebrae had larger dimensions for each metric. Depth dimensions were greatest at caudal and cranial extents, whereas width dimensions were smallest at C2 and increased caudally. Greater linear and areal dimensions in size-matched male subjects indicates a more stable cervical spinal column that may be more capable of resisting inertial loading of the head-neck complex during automotive rear impacts. Although the explanation for greater injury susceptibility in females is likely multi-factorial, including differences in spinal material properties, soft tissue tolerance thresholds, occupant-seatback orientation, and neck muscle size/orientations, the present study has identified significant differences in cervical spine anatomical dimensions that may contribute to greater rates of whiplash injury in that population.

Computerized tomographic morphometric analysis of subaxial cervical spine pedicles in young asymptomatic volunteers

BACKGROUND

Although cervical spine pedicle screws have been shown to provide excellent fixation, widespread acceptance of their use is limited because of the risk of injury to the spinal cord, nerve roots, and vertebral arteries. The risks of pedicle screw insertion in the cervical spine can be mitigated by a three-dimensional appreciation of pedicle anatomy. Normative data on three-dimensional subaxial pedicle geometry from a large, young, and asymptomatic North American population are lacking. The purpose of the present study was to determine three-dimensional subaxial pedicle geometry in a large group of young volunteers and to determine level and sex-specific morphologic differences.

METHODS

Helical computerized tomography scans were made from the third cervical to the seventh cervical vertebra in ninety-eight volunteers (sixty-three men and thirty-five women) with an average age of twenty-five years. Pedicle width, height, length, and transverse and sagittal angulations were measured bilaterally. Pedicle screw insertion positions were quantified in terms of mediolateral and superoinferior offsets relative to readily identifiable landmarks.

RESULTS

The mean pedicle width and height at all subaxial levels were sufficient to accommodate 3.5-mm screws in 98% of the volunteers. Pedicle width and height dimensions of <4.0 mm were rare (observed in association with only 1.7% of the pedicles), with 82% occurring in women and 72% occurring unilaterally. Screw insertion positions generally moved medially and superiorly at caudal levels. Transverse angulation was approximately 45 degrees at the third to fifth cervical levels and was less at more caudal levels. Sagittal angulation changed from a cranial orientation at superior levels to a caudal orientation at inferior levels. Mediolateral and superoinferior insertion positions and sagittal angulations were significantly dependent (p < 0.05) on sex and spinal level. Transverse angulation was significantly dependent (p < 0.05) on spinal level.

CONCLUSIONS

Pedicle screw insertion points and orientation are significantly different (p < 0.05) at most subaxial cervical levels and between men and women. Preoperative imaging studies should be carefully templated for pedicle size in all patients on a level-specific basis. Although the prevalence was low, women were more likely to have pedicle width and height dimensions of <4.0 mm.