High-Resolution 17O Solid-State NMR as a Unique Probe for Investigating Oxalate Binding Modes in Materials: The Case Study of Calcium Oxalate Biominerals

Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.

Revisiting the phosphonium salt chemistry for P-doped carbon synthesis: toward high phosphorus contents and beyond the phosphate environment

The introduction of phosphorus and nitrogen atoms in carbo-catalysts is a common way to tune the electronic density, and thereby the reactivity, of the material, as well as to introduce surface reactive sites. Numerous environments are reported for the N atoms, but the P-doping chemistry is less explored and focuses on surface POx groups. A one-step synthesis of P/N-doped carbonaceous materials is presented here, using affordable and industrially available urea and tetrakis(hydroxymethyl)phosphonium chloride (THPC) as the N and P sources, respectively. In contrast to most of the synthetic pathways toward P-doped carbonaceous materials, the THPC precursor only displays P-C bonds along the carbon backbone. This resulted in unusual phosphorus environments for the materials obtained from direct thermal treatment of THPC-urea, presumably of type C-P-N according to 31P NMR and XPS. Alternatively, the in situ polymerization and calcination of the precursors were run in calcium chloride hydrate, used as a combined reaction medium and porogen agent. Following this salt-templating strategy led to particularly high phosphorus contents (up to 18 wt%), associated with porosities up to 600 m2 g-1. The so-formed P/N-doped porous materials were employed as metal-free catalysts for the mild oxidative dehydrogenation of N-heterocycles to N-heteroarenes at room temperature and in air.

Nivolumab immunotherapy rechallenge for progressive laryngeal squamous cell carcinoma after failure of conventional treatment: A CARE case report

OBJECTIVE

Analysis of rechallenge with nivolumab as 5th-line therapy for locally and nodally failed laryngeal squamous cell carcinoma following conventional therapeutic modalities: radiotherapy, surgery and chemotherapy.

OBSERVATION

A 70-year-old male, with local and nodal progression of laryngeal squamous cell carcinoma after treatment with chemoradiotherapy and surgery, was initially treated for recurrence with carboplatin, 5-fluorouracile (FU) and cetuximab, followed by second-line nivolumab, and then two lines of conventional chemotherapy with paclitaxel and cetuximab followed by carboplatin and cetuximab. He underwent rechallenge with nivolumab in 5th line, achieving 12months' response, ongoing at the time of writing, and 42.5months' survival since initiation of exclusive systemic management after failure of conventional treatment.

CONCLUSION

This case report highlights the benefit of nivolumab rechallenge in 5th line following previous failure as stand-alone therapy in 2nd line for a patient with laryngeal squamous cell carcinoma locally and nodally uncontrolled after conventional treatment. Clinical trials evaluating the efficacy of this approach are necessary to assess its contribution, as it is currently not a standard therapeutic option.

43Ca MAS-DNP NMR of Frozen Solutions for the Investigation of Calcium Ion Complexation

Calcium ion complexation in aqueous solutions is of paramount importance in biology as it is related to cell signaling, muscle contraction, or biomineralization. However, Ca2+-complexes are dynamic soluble entities challenging to describe at the molecular level. Nuclear magnetic resonance appears as a method of choice to probe Ca2+-complexes. However, 43Ca NMR exhibits severe limitations arising from the low natural abundance coupled to the low gyromagnetic ratio and the quadrupolar nature of 43Ca, which overall make it a very unreceptive nucleus. Here, we show that 43Ca dynamic nuclear polarization (DNP) NMR of 43Ca-labeled frozen solutions is an efficient approach to enhance the NMR receptivity of 43Ca and to obtain structural insights about calcium ions complexed with representative ligands including water molecules, ethylenediaminetetraacetic acid (EDTA), and l-aspartic acid (l-Asp). In these conditions and in combination with numerical simulations and calculations, we show that 43Ca nuclei belonging to Ca2+ complexed to the investigated ligands exhibit rather low quadrupolar couplings (with CQ typically ranging from 0.6 to 1 MHz) due to high symmetrical environments and potential residual dynamics in vitrified solutions at a temperature of 100 K. As a consequence, when 1H→43Ca cross-polarization (CP) is used to observe 43Ca central transition, "high-power" νRF(43Ca) conditions, typically used to detect spin 1/2 nuclei, provide ∼120 times larger sensitivity than "low-power" conditions usually employed for detection of quadrupolar nuclei. These "high-power" CPMAS conditions allow two-dimensional (2D) 1H-43Ca HetCor spectra to be readily recorded, highlighting various Ca2+-ligand interactions in solution. This significant increase in 43Ca NMR sensitivity results from the combination of distinct advantages: (i) an efficient 1H-mediated polarization transfer from DNP, resembling the case of low-natural-abundance spin 1/2 nuclei, (ii) a reduced dynamics, allowing the use of CP as a sensitivity enhancement technique, and (iii) the presence of a relatively highly symmetrical Ca environment, which, combined to residual dynamics, leads to the averaging of the quadrupolar interaction and hence to efficient high-power CP conditions. Interestingly, these results indicate that the use of high-power CP conditions is an effective way of selecting symmetrical and/or dynamic 43Ca environments of calcium-containing frozen solution, capable of filtering out more rigid and/or anisotropic 43Ca sites characterized by larger quadrupolar constants. This approach could open the way to the atomic-level investigation of calcium environments in more complex, heterogeneous frozen solutions, such as those encountered at the early stages of calcium phosphate or calcium carbonate biomineralization events.

Harmful impact of treatment refusal in T3-4M0 endolaryngeal squamous cell carcinoma candidates for total laryngectomy: A STROBE analysis

PURPOSE

To evaluate the consequences of treatment refusal in total laryngectomy (TL) candidates with T3-4M0 endolaryngeal squamous cell carcinoma (SCC).

MATERIALS AND METHODS

A retrospective observational study was conducted in an inception cohort of 576 isolated T3-4M0 endolaryngeal SCC candidates for TL consecutively managed between 1970 and 2019 in a French university teaching hospital. The main endpoint was survival time and cause of death in 2 groups. Group A, 4.5% of the cohort, consisted of 26 patients who declined any laryngeal treatment. Group B consisted of 550 patients who accepted TL. Accessory endpoints were causes of TL refusal and associated variables. The STROBE guideline was applied. The significance threshold was set at P<0.005.

RESULTS

One-and 3-year actuarial survival estimates increased significantly (P<0.0001) from 39% and 15% in group A, to 83% and 63% in group B, respectively. In group A, 92% of causes of death implicated index SCC progression, whereas in group B intercurrent disease, metachronous second primary, locoregional and/or metastatic SCC progression and postoperative complications accounted for 37%, 31%, 29%, and 2%, respectively. The actuarial survival estimates within group A increased significantly (P=0.0003) from 0% at 1-year in patients managed with isolated supportive care to 56% in patients managed with chemotherapy (reaching 0% at 5years). Reasons for TL refusal were fear of surgery, refusal of tracheostoma, loss of physiologic phonation, and certain comorbidities. Age and chronologic period correlated significantly with TL refusal. Median age decreased (P<0.001) from 69years in group A to 58 years in group B. Percentage TL refusal increased (P<0.0001) from 2% to 11% before and after start 1990, respectively.

CONCLUSION

The current study determined loss of survival with refusal of any laryngeal treatment including TL, noted benefit of chemotherapy associated to supportive care, and discussed the possible contribution of immunotherapy.

Molten Salts-Driven Discovery of a Polar Mixed-Anion 3D framework at the nanoscale: Zn4Si2O7Cl2, Charge Transport and Photoelectrocatalytic Water Splitting

Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn4Si2O7Cl2. We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids.

Impact of Mesoporous Silica Functionalization Fine-Tuning on Antibiotic Uptake/Delivery and Bactericidal Activity

The mesoporous SBA-15 material was surface-functionalized with amino and carboxylic acid groups and used as a platform to investigate the interaction of these chemical groups with tetracycline, kanamycin, and ampicillin antibiotics. The interactions between the antibiotic and the functionalized surfaces were characterized using two-dimensional ¹H-¹³C HETCOR CP MAS and FTIR spectroscopy and indicated that -COO^- NH₃ ⁺ bondings had been formed between chemical groups on the silica surface and drug molecules. The surface modification resulted in higher kanamycin and ampicillin loadings and a slow-release rate, and all synthesized systems showed antibacterial activity against susceptible Escherichia coli bacteria. Almost total death of bacteria was obtained using a few ppm of tetracycline- and kanamycin-loaded systems, whereas the ampicillin-loaded one showed lower bactericidal activity than free ampicillin.

17O solid state NMR as a valuable tool for deciphering reaction mechanisms in mechanochemistry: the case study on the 17O-enrichment of hydrated Ca-pyrophosphate biominerals

The possibility of enriching in ¹⁷O the water molecules within hydrated biominerals belonging to the Ca-pyrophosphate family was investigated, using liquid assisted grinding (LAG) in the presence of ¹⁷O-labelled water. Two phases with different hydration levels, namely triclinic calcium pyrophosphate dihydrate (Ca₂P₂O₇·2H₂O, denoted t-CPPD) and monoclinic calcium pyrophosphate tetrahydrate (Ca₂P₂O₇·4H₂O, denoted m-CPPT β) were enriched in ¹⁷O using a "post-enrichment" strategy, in which the non-labelled precursors were ground under gentle milling conditions in the presence of stoichiometric quantities of ¹⁷O-enriched water (introduced here in very small volumes ∼10 μL). Using high-resolution ¹⁷O solid-state NMR (ssNMR) analyses at multiple magnetic fields, and dynamic nuclear polarisation (DNP)-enhanced ¹⁷O NMR, it was possible to show that the labelled water molecules are mainly located at the core of the crystal structures, but that they can enter the lattice in different ways, namely by dissolution/recrystallisation or by diffusion. Overall, this work sheds light on the importance of high-resolution ¹⁷O NMR to help decipher the different roles that water can play as a liquid-assisted grinding agent and as a reagent for ¹⁷O-isotopic enrichment.

Correction to "First Direct Insight into the Local Environment and Dynamics of Water Molecules in the Whewellite Mineral Phase: Mechanochemical Isotopic Enrichment and High-Resolution 17O and 2H NMR Analyses"

[This corrects the article DOI: 10.1021/acs.jpcc.2c02070.].

Monitoring of CaCO3 Nanoscale Structuration through Real-Time Liquid Phase Transmission Electron Microscopy and Hyperpolarized NMR

Calcium carbonate (CaCO₃) is one of the most significant biominerals in nature. Living organisms are able to control its biomineralization by means of an organic matrix to tailor a myriad of hybrid functional materials. The soluble organic components are often proteins rich in acidic amino-acids such as l-aspartic acid. While several studies have demonstrated the influence of amino acids on the crystallization of calcium carbonate, nanoscopic insight of their impact on CaCO₃ mineralization, in particular at the early stages, is still lacking. Herein, we implement liquid phase-transmission electron microscopy (LP-TEM) in order to visualize in real-time and at the nanoscale the prenucleation stages of CaCO₃ formation. We observe that l-aspartic acid favors the formation of individual and aggregated prenucleation clusters which are found stable for several minutes before the transformation into amorphous nanoparticles. Combination with hyperpolarized solid state nuclear magnetic resonance (DNP NMR) and density functional theory (DFT) calculations allow shedding light on the underlying mechanism at the prenucleation stage. The promoting nature of l-aspartic acid with respect to prenucleation clusters is explained by specific interactions with both Ca²⁺ and carbonates and the stabilization of the Ca²⁺-CO₃^2-/HCO₃^- ion pairs favoring the formation and stabilization of the CaCO₃ transient precursors. The study of prenucleation stages of mineral formation by the combination of in situ LP-TEM, advanced analytical techniques (including hyperpolarized solid-state NMR), and numerical modeling allows the real-time monitoring of prenucleation species formation and evolution and the comprehension of their relative stability.

First Direct Insight into the Local Environment and Dynamics of Water Molecules in the Whewellite Mineral Phase: Mechanochemical Isotopic Enrichment and High-Resolution 17O and 2H NMR Analyses

Calcium oxalate minerals of the general formula CaC₂O₄ ^. xH₂O are widely present in nature and usually associated with pathological calcifications, constituting up to 70-80% of the mineral component of renal calculi. The monohydrate phase (CaC₂O₄ ^.H₂O, COM) is the most stable form, accounting for the majority of the hydrated calcium oxalates found. These mineral phases have been studied extensively via X-ray diffraction and IR spectroscopy and, to a lesser extent, using ¹H, ¹³C, and ⁴³Ca solid-state NMR spectroscopy. However, several aspects of their structure and reactivity are still unclear, such as the evolution from low- to high-temperature COM structures (LT-COM and HT-COM, respectively) and the involvement of water molecules in this phase transition. Here, we report for the first time a ¹⁷O and ²H solid-state NMR investigation of the local structure and dynamics of water in the COM phase. A new procedure for the selective ¹⁷O- and ²H-isotopic enrichment of water molecules within the COM mineral is presented using mechanochemistry, which employs only microliter quantities of enriched water and leads to exchange yields up to ∼30%. ¹⁷O NMR allows both crystallographically inequivalent water molecules in the LT-COM structure to be resolved, while ²H NMR studies provide unambiguous evidence that these water molecules are undergoing different types of motions at high temperatures without exchanging with one another. Dynamics appear to be essential for water molecules in these structures, which have not been accounted for in previous structural studies on the HT-COM structure due to lack of available tools, highlighting the importance of such NMR investigations for refining the overall knowledge on biologically relevant minerals like calcium oxalates.

Leucine on Silica: A Combined Experimental and Modeling Study of a System Relevant for Origins of Life, and the Role of Water Coadsorption

Leucine on silica constitutes an interesting system from the point of view of origins of life studies since leucine coadsorbed on SiO₂ together with glutamic acid can give rise to rather long linear polypeptides upon activation. It is also an ideal system to test methods of molecular characterization of biomolecules deposited on mineral surfaces since it combines a small-scale model of peptides and proteins, which are among the most important components of biodevices, with one of the most widely used inorganic materials. We have deposited l-leucine on a high surface fumed silica in the submonolayer range and characterized it by a multipronged approach including macroscopic information (thermogravimetry, X-ray diffraction), in situ spectroscopic methods (IR, multinuclear solid-state NMR including single-pulse and CP-MAS, 2-D HETCOR), and molecular modeling by density functional theory (DFT), including calculation of NMR parameters. Specific information can be obtained on the adsorption and interaction mechanism. Leucine is rather strongly adsorbed without any covalent bonds, through the formation of a specific lattice of H-bonds that often involve coadsorbed water molecules. Its state is indeed strongly dependent on the drying procedure: insufficient drying results in liquid-like surroundings for the leucine functional groups, while vacuum drying only retains a limited number of waters (of the order of 5 per leucine molecule). The most stable models have zwitterionic leucine interacting directly with surface silanols through their ammonium group, while the carboxylate interacts through bridging waters. Experimental NMR chemical shifts are satisfactorily predicted for these models, and leucine can be viewed as a probe for specific groups of surface sites known as silanol nests.

From Operando Raman Mechanochemistry to "NMR Crystallography": Understanding the Structures and Interconversion of Zn-Terephthalate Networks Using Selective 17O-Labeling

The description of the formation, structure, and reactivity of coordination networks and metal-organic frameworks (MOFs) remains a real challenge in a number of cases. This is notably true for compounds composed of Zn²⁺ ions and terephthalate ligands (benzene-1,4-dicarboxylate, BDC) because of the difficulties in isolating them as pure phases and/or because of the presence of structural defects. Here, using mechanochemistry in combination with operando Raman spectroscopy, the observation of the formation of various zinc terephthalate compounds was rendered possible, allowing the distinction and isolation of three intermediates during the ball-milling synthesis of Zn₃(OH)₄(BDC). An "NMR crystallography" approach was then used, combining solid-state NMR (¹H, ¹³C, and ¹⁷O) and density functional theory (DFT) calculations to refine the poorly described crystallographic structures of these phases. Particularly noteworthy are the high-resolution ¹⁷O NMR analyses, which were made possible in a highly efficient and cost-effective way, thanks to the selective ¹⁷O-enrichment of either hydroxyl or terephthalate groups by ball-milling. This allowed the presence of defect sites to be identified for the first time in one of the phases, and the nature of the H-bonding network of the hydroxyls to be established in another. Lastly, the possibility of using deuterated precursors (e.g., D₂O and d ₄-BDC) during ball-milling is also introduced as a means for observing specific transformations during operando Raman spectroscopy studies, which would not have been possible with hydrogenated equivalents. Overall, the synthetic and spectroscopic approaches developed herein are expected to push forward the understanding of the structure and reactivity of other complex coordination networks and MOFs.

A 43 Ca nuclear magnetic resonance perspective on octacalcium phosphate and its hybrid derivatives

⁴³ Ca nuclear magnetic resonance (NMR) spectroscopy has been extensively applied to the detailed study of octacalcium phosphate (OCP), Ca₈ (HPO₄ )₂ (PO₄ )₄ .5H₂ O, and hybrid derivatives involving intercalated metabolic acids (viz., citrate, succinate, formate, and adipate). Such phases are of importance in the development of a better understanding of bone structure. High-resolution ⁴³ Ca magic angle spinning (MAS) experiments, including double-rotation (DOR) ⁴³ Ca NMR, as well as ⁴³ Ca{¹ H} rotational echo DOR (REDOR) and ³¹ P{⁴³ Ca} REAPDOR NMR spectra, were recorded on a ⁴³ Ca-labeled OCP phase at very high magnetic field (20 T), and complemented by ab initio calculations of NMR parameters using the Gauge-Including Projector Augmented Wave-density functional theory (GIPAW-DFT) method. This enabled a partial assignment of the eight inequivalent Ca²⁺ sites of OCP. Natural-abundance ⁴³ Ca MAS NMR spectra were then recorded for the hybrid organic-inorganic derivatives, revealing changes in the ⁴³ Ca lineshape. In the case of the citrate derivative, these could be interpreted on the basis of computational models of the structure. Overall, this study highlights the advantages of combining high-resolution ⁴³ Ca NMR experiments and computational modeling for studying complex hybrid biomaterials.

17 O solid-state NMR at ultrahigh magnetic field of 35.2 T: Resolution of inequivalent oxygen sites in different phases of MOF MIL-53(Al)

MIL-53(Al) is a member of the most extensively studied metal-organic framework (MOF) families owing to its "flexible" framework and superior stability. 17 O solid-state NMR (SSNMR) spectroscopy is an ideal site-specific characterization tool as it probes local oxygen environments. Because oxygen local structure is often altered during phase change, 17 O SSNMR can be used to follow phase transitions. However, 17 O is a challenging nucleus to study via SSNMR due to its low sensitivity and resolution arising from the very low natural abundance of 17 O isotope and its quadrupolar nature. In this work, we describe that by using 17 O isotopic enrichment and performing 17 O SSNMR experiments at an ultrahigh magnetic field of 35.2 T, all chemically and crystallographically inequivalent oxygen sites in two representative MIL-53(Al) (as-made and water adsorbed) phases can be completely resolved. The number of signals in each phase is consistent with that predicted from the space group refined from powder X-ray diffraction data. The 17 O 1D magic-angle spinning (MAS) and 2D triple-quantum MAS (3QMAS) spectra at 35.2 T furnish fine information about the host-guest interactions and the structural changes associated with phase transition. The ability to completely resolve multiple chemically and crystallographically inequivalent oxygen sites in MOFs at very high magnetic field, as illustrated in this work, significantly enhances the potential for using the NMR crystallography approach to determine crystal structures of new MOFs and verify the structures of existing MOFs obtained from refining powder X-ray diffraction data.

Looking into the dynamics of molecular crystals of ibuprofen and terephthalic acid using 17 O and 2 H nuclear magnetic resonance analyses

Oxygen-17 and deuterium are two quadrupolar nuclei that are of interest for studying the structure and dynamics of materials by solid-state nuclear magnetic resonance (NMR). Here, 17 O and 2 H NMR analyses of crystalline ibuprofen and terephthalic acid are reported. First, improved 17 O-labelling protocols of these molecules are described using mechanochemistry. Then, dynamics occurring around the carboxylic groups of ibuprofen are studied considering variable temperature 17 O and 2 H NMR data, as well as computational modelling (including molecular dynamics simulations). More specifically, motions related to the concerted double proton jump and the 180° flip of the H-bonded (-COOH)2 unit in the crystal structure were looked into, and it was found that the merging of the C=O and C-OH 17 O resonances at high temperatures cannot be explained by the sole presence of one of these motions. Lastly, preliminary experiments were performed with a 2 H-17 O diplexer connected to the probe. Such configurations can allow, among others, 2 H and 17 O NMR spectra to be recorded at different temperatures without needing to tune or to change probe configurations. Overall, this work offers a few leads which could be of use in future studies of other materials using 17 O and 2 H NMR.

A novel multinuclear solid-state NMR approach for the characterization of kidney stones

The spectroscopic study of pathological calcifications (including kidney stones) is extremely rich and helps to improve the understanding of the physical and chemical processes associated with their formation. While Fourier transform infrared (FTIR) imaging and optical/electron microscopies are routine techniques in hospitals, there has been a dearth of solid-state NMR studies introduced into this area of medical research, probably due to the scarcity of this analytical technique in hospital facilities. This work introduces effective multinuclear and multidimensional solid-state NMR methodologies to study the complex chemical and structural properties characterizing kidney stone composition. As a basis for comparison, three hydrates (n = 1 , 2 and 3) of calcium oxalate are examined along with nine representative kidney stones. The multinuclear magic angle spinning (MAS) NMR approach adopted investigates the 1 H , 13 C , 31 P and 31 P nuclei, with the 1 H and 13 C MAS NMR data able to be readily deconvoluted into the constituent elements associated with the different oxalates and organics present. For the first time, the full interpretation of highly resolved 1 H NMR spectra is presented for the three hydrates, based on the structure and local dynamics. The corresponding 31 P MAS NMR data indicates the presence of low-level inorganic phosphate species; however, the complexity of these data make the precise identification of the phases difficult to assign. This work provides physicians, urologists and nephrologists with additional avenues of spectroscopic investigation to interrogate this complex medical dilemma that requires real, multitechnique approaches to generate effective outcomes.

Electron Precise Sodium Carbaboride Nanocrystals from Molten Salts: Single Sources to Boron Carbides

Boron-rich solids exhibit specific crystal structures and unique properties, which are only very scarcely addressed in nanoparticles. In this work, we address the original inorganic structural chemistry and reactivity of boron-rich nanoparticles, by reporting the first occurrence of sodium carbaboride nanocrystals based on the NaB₅C crystal structure. To design these sub-10 nm nano-objects, we use liquid-phase synthesis in molten salts at 900 °C. By combining a set of characterization tools including powder X-ray powder diffraction, transmission electron microscopy, solid-state nuclear magnetic resonance coupled to DFT modeling, and X-ray photoelectron spectroscopy, we demonstrate that these nanocrystals deviate from the ideal stoichiometry reported for the bulk compound. We suggest that the carbon and sodium contents compensate each other to ensure that the octahedral cluster-based framework is stabilized by fulfilling an electron counting rule. These nanocrystals encompass substituted octahedral covalent structural building units not reported in the related bulk compound. They then shed new light on the ability of nanoparticles to host wide solid solution ranges in covalent solids and then to yield new solids. We finally show that these nanocrystals are efficient single sources of boron and carbon to form a nanostructured boron carbide, thus paving the way to new nanostructured materials.

Self-supporting carbon-rich SiOC ceramic electrodes for lithium-ion batteries and aqueous supercapacitors

Fabrication of precursor-derived ceramic fibers as electrodes for energy storage applications remains largely unexplored. Within this work, three little known polymer-derived ceramic (PDC)-based fibers are being studied systemically as potential high-capacity electrode materials for electrochemical energy devices. We report fabrication of precursor-derived SiOC fibermats via one-step spinning from various compositions of siloxane oligomers followed by stabilization and pyrolysis at 800 °C. Electron microscopy, Raman, FTIR, XPS, and NMR spectroscopies reveal transformation from polymer to ceramic stages of the various SiOC ceramic fibers. The ceramic samples are a few microns in diameter with a free carbon phase embedded in the amorphous Si–O–C structure. The free carbon phase improves the electronic conductivity and provides major sites for ion storage, whereas the Si–O–C structure contributes to high efficiency. The self-standing electrodes in lithium-ion battery half-cells deliver a charge capacity of 866 mA h g_electrode⁻¹ with a high initial coulombic efficiency of 72%. As supercapacitor electrode, SiOC fibers maintain 100% capacitance over 5000 cycles at a current density of 3 A g⁻¹.

Fabrication of precursor-derived ceramic fibers as electrodes for energy storage applications remains largely unexplored.

Unveiling the Structure and Reactivity of Fatty-Acid Based (Nano)materials Thanks to Efficient and Scalable 17O and 18O-Isotopic Labeling Schemes

Fatty acids are ubiquitous in biological systems and widely used in materials science, including for the formulation of drugs and the surface-functionalization of nanoparticles. However, important questions regarding the structure and reactivity of these molecules are still to be elucidated, including their mode of binding to certain metal cations or materials surfaces. In this context, we have developed novel, efficient, user-friendly, and cost-effective synthetic protocols based on ball-milling, for the 17O and 18O isotopic labeling of two key fatty acids which are widely used in (nano)materials science, namely stearic and oleic acid. Labeled molecules were analyzed by 1H and 13C solution NMR, IR spectroscopy, and mass spectrometry (ESI-TOF and LC-MS), as well as 17O solid state NMR (for the 17O labeled species). In both cases, the labeling procedures were scaled-up to produce up to gram quantities of 17O- or 18O-enriched molecules in just half-a-day, with very good synthetic yields (all ≥84%) and enrichment levels (up to an average of 46% per carboxylic oxygen). The 17O-labeled oleic acid was then used for the synthesis of a metal soap (Zn-oleate) and the surface-functionalization of ZnO nanoparticles (NPs), which were characterized for the first time by high-resolution 17O NMR (at 14.1 and 35.2 T). This allowed very detailed insight into (i) the coordination mode of the oleate ligand in Zn-oleate to be achieved (including information on Zn···O distances) and (ii) the mode of attachment of oleic-acid at the surface of ZnO (including novel information on its photoreactivity upon UV-irradiation). Overall, this work demonstrates the high interest of these fatty acid-enrichment protocols for understanding the structure and reactivity of a variety of functional (nano)materials systems using high resolution analyses like 17O NMR.

Fabrication and characterization of silicon oxycarbide fibre-mats via electrospinning for high temperature applications

Electrospinning is an emerging technique for synthesizing micron to submicron-sized polymer fibre supports for applications in energy storage, catalysis, filtration, drug delivery and so on. However, fabrication of electrospun ceramic fibre mats for use as a reinforcement phase in ceramic matrix composites or CMCs for aerospace applications remains largely unexplored. This is mainly due to stringent operating requirements that require a combination of properties such as low mass density, high strength, and ultrahigh temperature resistance. Herein we report fabrication of molecular precursor-derived silicon oxycarbide or SiOC fibre mats via electrospinning and pyrolysis of cyclic polysiloxanes-based precursors at significantly lower weight loadings of organic co-spin agent. Ceramic fibre mats, which were free of wrapping, were prepared by a one-step spinning (in air) and post heat-treatment for crosslinking and pyrolysis (in argon at 800 °C). The pyrolyzed fibre mats were revealed to be amorphous and a few microns in diameter. Four siloxane-based pre-ceramic polymers were used to study the influence of precursor molecular structure on the compositional and morphological differences of cross-linked and pyrolyzed products. Further thermal characterization suggested the potential of electrospun ceramic mats in high temperature applications.

Electrospinning of ceramic mats for high temperature applications.

Higher Magnetic Fields, Finer MOF Structural Information: 17O Solid-State NMR at 35.2 T

The spectroscopic study of oxygen, a vital element in materials, physical, and life sciences, is of tremendous fundamental and practical importance. ¹⁷O solid-state NMR (SSNMR) spectroscopy has evolved into an ideal site-specific characterization tool, furnishing valuable information on the local geometric and bonding environments about chemically distinct and, in some favorable cases, crystallographically inequivalent oxygen sites. However, ¹⁷O is a challenging nucleus to study via SSNMR, as it suffers from low sensitivity and resolution, owing to the quadrupolar interaction and low ¹⁷O natural abundance. Herein, we report a significant advance in ¹⁷O SSNMR spectroscopy. ¹⁷O isotopic enrichment and the use of an ultrahigh 35.2 T magnetic field have unlocked the identification of many inequivalent carboxylate oxygen sites in the as-made and activated phases of the metal-organic framework (MOF) α-Mg₃(HCOO)₆. The subtle ¹⁷O spectral differences between the as-made and activated phases yield detailed information about host-guest interactions, including insight into nonconventional O···H-C hydrogen bonding. Such weak interactions often play key roles in the applications of MOFs, such as gas adsorption and biomedicine, and are usually difficult to study via other characterization routes. The power of performing ¹⁷O SSNMR experiments at an ultrahigh magnetic field of 35.2 T for MOF characterization is further demonstrated by examining activation of the MIL-53(Al) MOF. The sensitivity and resolution enhanced at 35.2 T allows partially and fully activated MIL-53(Al) to be unambiguously distinguished and also permits several oxygen environments in the partially activated phase to be tentatively identified. This demonstration of the very high resolution of ¹⁷O SSNMR recorded at the highest magnetic field accessible to chemists to date illustrates how a broad variety of scientists can now study oxygen-containing materials and obtain previously inaccessible fine structural information.

Recent directions in the solid-state NMR study of synthetic and natural calcium phosphates

Materials containing a calcium phosphate component have been the subject of much interest to NMR spectroscopists, especially in view of understanding the structure and properties of mineralized tissues like bone and teeth, and of developing synthetic biomaterials for bone regeneration. Here, we present a selection of recent developments in their structural characterization using advanced solid state NMR experiments, highlighting the level of insight which can now be accessed.

A soft-chemistry approach to the synthesis of amorphous calcium ortho/pyrophosphate biomaterials of tunable composition

The development of amorphous phosphate-based materials is of major interest in the field of biomaterials science, and especially for bone substitution applications. In this context, we herein report the synthesis of gel-derived hydrated amorphous calcium/sodium ortho/pyrophosphate materials at ambient temperature and in water. For the first time, such materials have been obtained in a large range of tunable orthophosphate/pyrophosphate molar ratios. Multi-scale characterization was carried out thanks to various techniques, including advanced multinuclear solid state NMR. It allowed the quantification of each ionic/molecular species leading to a general formula for these materials: [(Ca²⁺_y Na⁺_z H⁺_3+x-2y-z)(PO₄^3-)_1-x(P₂O₇^4-)_x](H₂O)_u. Beyond this formula, the analyses suggest that these amorphous solids are formed by the aggregation of colloids and that surface water and sodium could play a role in the cohesion of the whole material. Although the full comprehension of mechanisms of formation and structure is still to be investigated in detail, the straightforward synthesis of these new amorphous materials opens up many perspectives in the field of materials for bone substitution and regeneration. STATEMENT OF SIGNIFICANCE: The metastability of amorphous phosphate-based materials with various chain length often improves their (bio)chemical reactivity. However, the control of the ratio of the different phosphate entities has not been yet described especially for small ions (pyrophosphate/orthophosphate) and using soft chemistry, whereas it opens the way for the tuning of enzyme- and/or pH-driven degradation and biological properties. Our study focuses on elaboration of amorphous gel-derived hydrated calcium/sodium ortho/pyrophosphate solids at 70 °C with a large range of orthophosphate/pyrophosphate ratios. Multi-scale characterization was carried out using various techniques such as advanced multinuclear SSNMR (³¹P, ²³Na, ¹H, ⁴³Ca). Analyses suggest that these solids are formed by colloids aggregation and that the location of mobile water and sodium could play a role in the material cohesion.

Synthesis, characterization and modeling of self-assembled porphyrin nanorods

Porphyrin nanorods were prepared by ion-association between free-base meso 5,10,15,20-tetrakis-(4-[Formula: see text]-methylpyridinium)porphyrin cations and tetraphenylborate anions. The nanorods have variable lengths (up to a few micrometers long) and diameters ([Formula: see text]50–500 nm). Their structure at the molecular level was elucidated by combining multinuclear solid state NMR spectroscopy, synchrotron X-ray powder diffraction and DFT calculations.

Advances in the synthesis and structure of α-canaphite: a multitool and multiscale study

Pure α-canaphite is synthesized and thoroughly characterized; its hydrated layered structure is now fully solved by combining experimental and modeling data.

Preparation and structure of SiOCN fibres derived from cyclic silazane/poly-acrylic acid hybrid precursor

Ceramic matrix composite (CMC) materials have been considered a desired solution for lightweight and high-temperature applications. Simultaneously, among all different CMC reinforcements, polymer-derived ceramic (PDC) fibres have gained attention for the intrinsic thermal stability and mechanical strength with simple and cost-effective synthesis techniques. Here, carbon-rich SiOCN fibres were synthesized via hand-drawing and polymer pyrolysis of a hybrid precursor of 1,3,5,7-tetramethyl-1,3,5,7-tetravinylcyclotetrasilazane (TTCSZ) and poly-acrylic acid (PAA). The type of silazane reported in this work is considered as a major precursor for SiCN; however, it is unspinnable, due to its unfavourable physical properties (low viscosity) and chemical structure (cyclic rather than linear structure). The introduction of PAA to TTCSZ to create a hybrid precursor remarkably improved the spinnability of the silazane and should be widely applicable to other unspinnable PDC pre-ceramic polymers. Investigations on the structural and compositional development of the fibres were mainly conducted via Raman spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, nuclear magnetic resonance and thermo-gravimetric analysis to determine spinnability, free carbon content, cross-linking and pyrolysis behaviour of the fibres, respectively.

Enhanced sieving from exfoliated MoS2 membranes via covalent functionalization

Nanolaminate membranes made of two-dimensional materials such as graphene oxide are promising candidates for molecular sieving via size-limited diffusion in the two-dimensional capillaries, but high hydrophilicity makes these membranes unstable in water. Here, we report a nanolaminate membrane based on covalently functionalized molybdenum disulfide (MoS₂) nanosheets. The functionalized MoS₂ membranes demonstrate >90% and ~87% rejection for micropollutants and NaCl, respectively, when operating under reverse osmotic conditions. The sieving performance and water flux of the functionalized MoS₂ membranes are attributed both to control of the capillary widths of the nanolaminates and to control of the surface chemistry of the nanosheets. We identify small hydrophobic functional groups, such as the methyl group, as the most promising for water purification. Methyl- functionalized nanosheets show high water permeation rates as confirmed by our molecular dynamic simulations, while maintaining high NaCl rejection. Control of the surface chemistry and the interlayer spacing therefore offers opportunities to tune the selectivity of the membranes while enhancing their stability.

High-Pressure Melting Curve of Zintl Sodium Silicide Na4Si4 by In Situ Electrical Measurements

The inorganic chemistry of the Na-Si system at high pressure is fascinating, with a large number of interesting compounds accessible in the industrial pressure scale, below 10 GPa. In particular, Na₄Si₄ is stable in this whole pressure range and thus plays an important role in understanding the thermodynamics and kinetics underlying materials synthesis at high pressures and high temperatures. In the present work, the melting curve of the Zintl compound Na₄Si₄ made of Na⁺ and Si₄^4- tetrahedral cluster ions is studied at high pressures up to 5 GPa, by using in situ electrical measurements. During melting, the insulating Na₄Si₄ solid transforms into an ionic conductive liquid that can be probed through the conductance of the whole high-pressure cell, i.e., the system constituted of the sample, the heater, and the high-pressure assembly. Na₄Si₄ melts congruently in the studied pressure range, and its melting point increases with pressure with a positive slope dT_m/dp of 20(4) K/GPa.

Nature of Hexagonal Silicon Forming via High-Pressure Synthesis: Nanostructured Hexagonal 4H Polytype

Hexagonal Si allotropes are expected to enhance light absorption in the visible range as compared to common cubic Si with diamond structure. Therefore, synthesis of these materials is crucial for the development of Si-based optoelectronics. In this work, we combine in situ high-pressure high-temperature synthesis and vacuum heating to obtain hexagonal Si. High pressure is one of the most promising routes to stabilize these allotropes. It allows one to obtain large-volume nanostructured ingots by a sequence of direct solid-solid transformations, ensuring high-purity samples for detailed characterization. Thanks to our synthesis approach, we provide the first evidence of a polycrystalline bulk sample of hexagonal Si. Exhaustive structural analysis, combining fine-powder X-ray and electron diffraction, afforded resolution of the crystal structure. We demonstrate that hexagonal Si obtained by high-pressure synthesis correspond to Si-4H polytype (ABCB stacking) in contrast with Si-2H (AB stacking) proposed previously. This result agrees with prior calculations that predicted a higher stability of the 4H form over 2H form. Further physical characterization, combining experimental data and ab initio calculations, have shown a good agreement with the established structure. Strong photoluminescence emission was observed in the visible region for which we foresee optimistic perspectives for the use of this material in Si-based photovoltaics.

Layered Boron-Nitrogen-Carbon-Oxygen Materials with Tunable Composition as Lithium-Ion Battery Anodes

The insertion of heteroatoms with different electronegativity into carbon materials can tune their chemical, electronic, and optical properties. However, in traditional solid-state synthesis, it is challenging to control the reactivity of monomers, and therefore, the amount and position of heteroatoms in the final materials. Herein, a simple, scalable, and general molten-state route to synthesize boron-nitrogen-carbon-oxygen (BNCO) materials with tunable boron-nitrogen-carbon composition, as well as electronic and optical properties, is reported. The new synthetic approach consists of polycyclic aromatic hydrocarbons (PAHs) and ammonia-borane as reactants that form a clear liquid-state stage spanning a wide temperature range, before the solid-state reaction. The molten-state stage enhances the control over the synthetic intermediates and final materials, owing to improved monomer miscibility and reactivity. The BNCO composition and optical properties are tuned by the PAH selection and final reaction temperature. The advantages of this method are demonstrated herein through the tunable optical properties, excellent stability to oxidization, facile deposition on substrates, and good activity as an anode material in lithium-ion batteries.

Pushing the limits of sensitivity and resolution for natural abundance 43Ca NMR using ultra-high magnetic field (35.2 T)

Natural abundance 43Ca solid state NMR experiments are reported for the first time at ultra-high magnetic field (35.2 T) on a series of Ca-(pyro)phosphate and Ca-oxalate materials, which are of biological relevance in relation to biomineralization processes and the formation of pathological calcifications. The significant gain in both sensitivity and resolution at 35.2 T leads to unprecedented insight into the structure of both crystalline and amorphous phases.

Crosslinking chemistry of poly(vinylmethyl-co-methyl)silazanes toward low-temperature formable preceramic polymers as precursors of functional aluminium-modified Si–C–N ceramics

Study of the crosslinking chemistry of liquid polysilazanes with alane hydride-based complex.

Molecular-Level Processing of Si-(B)-C Materials with Tailored Nano/Microstructures

The design of Si-(B)-C materials is investigated, with detailed insight into the precursor chemistry and processing, the precursor-to-ceramic transformation, and the ceramic microstructural evolution at high temperatures. In the early stage of the process, the reaction between allylhydridopolycarbosilane (AHPCS) and borane dimethyl sulfide is achieved. This is investigated in detail through solid-state NMR and FTIR spectroscopy and elemental analyses for Si/B ratios ranging from 200 to 30. Boron-based bridges linking AHPCS monomeric fragments act as crosslinking units, extending the processability range of AHPCS and suppressing the distillation of oligomeric fragments during the low-temperature pyrolysis regime. Polymers with low boron contents display appropriate requirements for facile processing in solution, leading to the design of monoliths with hierarchical porosity, significant pore volume, and high specific surface area after pyrolysis. Polymers with high boron contents are more appropriate for the preparation of dense ceramics through direct solid shaping and pyrolysis. We provide a comprehensive study of the thermal decomposition mechanisms, and a subsequent detailed study of the high-temperature behavior of the ceramics produced at 1000 °C. The nanostructure and microstructure of the final SiC-based ceramics are intimately linked to the boron content of the polymers. B₄ C/C/SiC nanocomposites can be obtained from the polymer with the highest boron content.

Molecular design of melt-spinnable co-polymers as Si-B-C-N fiber precursors

Two series of co-polymers with the general formula [B(C₂H₄SiCH₃(NH)_x(NCH₃)_y)₃]_n, i.e., composed of C₂H₄SiCH₃(NH)_x and C₂H₄SiCH₃(NCH₃)_y (C₂H₄ = CHCH₃, CH₂CH₂) building blocks in a well defined x : y ratio, have been synthesized by hydroboration of dichloromethylvinylsilane with borane dimethyl sulfide followed by successive reactions with lithium amide and methylamine according to controlled ratios. The role of the chemistry behind their syntheses has been studied in detail by solid-state NMR, FT-IR and elemental analyses. Then, the intimate relationship between the chemistry and the melt-spinnability of these polymers was discussed. By keeping x = 0.50 and increasing y above 0.50, i.e., obtaining methylamine excess, the co-polymers contained more ending groups and especially more tetracoordinated boron, thus allowing tuning very precisely the chemical structure of the preceramic polymer in order to meet the requirements for melt-spinning. The curing treatment under ammonia at 200 °C efficiently rendered the green fibers infusible before their subsequent pyrolysis under nitrogen at 1000 °C to generate Si-B-C-N ceramic fibers. Interestingly, it could be possible to produce also low diameter hollow fibers with relatively high mechanical properties for a further exploration as membrane materials.

Unleashing the Potential of 17 O NMR Spectroscopy Using Mechanochemistry

¹⁷ O NMR spectroscopy has been the subject of vivid interest in recent years, because there is increasing evidence that it can provide unique insight into the structure and reactivity of many molecules and materials. However, due to the very poor natural abundance of oxygen-17, ¹⁷ O labeling is generally a prerequisite. This is a real obstacle for most research groups, because of the high costs and/or strong experimental constraints of the most frequently used ¹⁷ O-labeling schemes. Here, we show for the first time that mechanosynthesis offers unique opportunities for enriching in ¹⁷ O a variety of organic and inorganic precursors of synthetic interest. The protocols are fast, user-friendly, and low-cost, which makes them highly attractive for a broad research community, and their suitability for ¹⁷ O solid-state NMR applications is demonstrated.

Insight into the local environment of magnesium and calcium in low-coordination-number organo-complexes using 25Mg and 43Ca solid-state NMR: a DFT study

With the increasing number of organocalcium and organomagnesium complexes under development, there is a real need to be able to characterize in detail their local environment in order to fully rationalize their reactivity. For crystalline structures, in cases when diffraction techniques are insufficient, additional local spectroscopies like ²⁵Mg and ⁴³Ca solid-state NMR may provide valuable information to help fully establish the local environment of the metal ions. In this current work, a prospective DFT investigation on crystalline magnesium and calcium complexes involving low-coordination numbers and N-bearing organic ligands was carried out, in which the ²⁵Mg and ⁴³Ca NMR parameters [isotropic chemical shift, chemical shift anisotropy (CSA) and quadrupolar parameters] were calculated for each structure. The analysis of the calculated parameters in relation to the local environment of the metal ions revealed that they are highly sensitive to very small changes in geometry/distances, and hence that they could be used to assist in the refinement of crystal structures. Moreover, such calculations provide a guideline as to how the NMR measurements will need to be performed, revealing that these will be very challenging.