Lipid-based eye drop formulations for the management of evaporative dry eyes

Dry eye disease is a progressive prevalent ocular surface disorder that arises from various factors and is characterized by insufficient quality and/or quantity of tears. The underlying pathophysiology is intricate and can progress to chronic, difficult-to-treat conditions. Multiple strategies and therapeutic approaches are utilized in its management that target one or more etiopathological components of dry eyes, which may include aqueous tear deficiency or evaporative dry eyes. The primary focus of this paper is on treatment alternatives that utilize lipids for the treatment of evaporative dry eyes. This may arise from either abnormal lipid production or inadequate lipid spreading caused by meibomian gland dysfunction. The hypothesis behind the development of these lipid-containing eye drops is that if they can imitate the lipid layer, they may be able to help in the management of the signs and symptoms of evaporative dry eyes. The lipids used in commercial formulations for dry eyes are mineral oil, castor oil, phospholipids, omega-3 fatty acid, and medium-chain triglycerides. The literature suggests the potential of lipid-containing eye drops to alleviate some of the signs and symptoms and enhance the quality of life for individuals suffering from evaporative dry eyes.

Clozapine-laden carbon dots delivered to the brain via an intranasal pathway: Synthesis, characterization, ex vivo, and in vivo studies

Clozapine, which is widely used to treat schizophrenia, shows low bioavailability due to poor solubility and high first-pass metabolism. The study aimed to design clozapine-loaded carbon dots (CDs) to enhance availability of the clozapine to the brain via intranasal pathway. The CDs were synthesized by pyrolysis of citric acid and urea at 200 °C by hydrothermal technique and characterized by photoluminescence, transmission electron microscopy (TEM), X-ray Photoelectron Spectrometer (XPS), and Fourier transform infrared spectrum (FTIR). The optimized clozapine-loaded CDs (CLZ-CDs-1:3-200) showed a quasi-spherical shape (9-12 nm) with stable blue fluorescence. The CDs showed high drug solubilization capacity (1.5 mg drug in 1 mg/ml CDs) with strong electrostatic interaction with clozapine (drug loading efficiency = 94.74%). The ex vivo release study performed using nasal goat mucosa showed sustained release of clozapine (43.89%) from CLZ-CDs-1:3-200 for 30 h. The ciliotoxicity study (histopathology) confirmed no toxicity to the nasal mucosal tissues using CDs. In the rat model (in vivo pharmacokinetic study), when CDs were administrated by the intranasal route, a significantly higher concentration of clozapine in the brain tissue (Cmax = 58.07 ± 5.36 μg/g and AUCt (µg/h*g) = 105.76 ± 12.31) was noted within a short time (tmax = 1 h) compared to clozapine suspension administered by intravenous route (Cmax = 20.99 ± 3.91 μg/g, AUC t (µg/h*g) = 56.89 ± 12.31, and tmax = 4 h). The high value of drug targeting efficiency (DTE, 486%) index and direct transport percentage (DTP, 58%) indicates the direct entry of clozapine-CDs in the brain via the olfactory route. In conclusion, designed CDs demonstrated a promising dosage form for targeted nose-to-brain delivery of clozapine for the effective treatment of schizophrenia.

Chitosan nanoparticles laden contact lenses for enzyme-triggered controlled delivery of timolol maleate: A promising strategy for managing glaucoma

To improve drug bioavailability, eye drops can be replaced by drug-eluting contact lenses. However, issues of drug leaching from lenses during manufacture and storage, and sterilization, currently limit their commercial application. To address the issues, stimuli-(lysozyme)-sensitive chitosan nanoparticles were developed to provide controlled ocular drug delivery. Nanoparticles were prepared by ionic gelation and characterized by TEM, X-ray diffraction, DSC, and FTIR. In the flux study, conventional-soaked contact lenses (SM-TM-CL) showed high-burst release, while with direct drug-only laden contact lenses (DL-TM-CL) the drug was lost during extraction and sterilization, as well as having poor swelling and optical properties. The nanoparticle-laden contact lenses (TM-Cht-NPs) showed controlled release of timolol for 120 h in the presence of lysozyme, with acceptable opto-physical properties. In the shelf-life study, the TM-Cht-NPs contact lenses showed no leaching or alteration in the drug release pattern. In animal studies, the TM-NPs-CL lenses gave a high drug concentration in rabbit tear fluid (mean = 11.01 µg/mL for 56 h) and helped maintain a low intraocular pressure for 120 h. In conclusion, the chitosan nanoparticle-laden contact lenses demonstrated the potential application to treat glaucoma with acceptable opto-physical properties and addressed the issues of drug-leaching during sterilization and storage.

Controlled bimatoprost release from graphene oxide laden contact lenses: In vitro and in vivo studies

Ocular drug delivery using contact lenses may be able to substitute for eye drop therapy. However, issues with hydrophobic drugs (like bimatoprost that is used to treat glaucoma) such as low drug uptake using a simple soaking method into preformed contact lenses and alteration in the swelling and transmittance of lenses restricts the application for drug delivery. This research uses graphene oxide (GO) to control the release of bimatoprost from contact lenses along with improvements in the drug uptake, and lens swelling and transmittance. GO was loaded into silicone hydrogel contact lenses by adding the GO at the same time as lenses were polymerized. These lenses were soaked in bimatoprost. Alternatively contact lenses, either with or without GO, were produced by adding bimatoprost during lens polymerization. GO improved contact lens swelling due to its water binding capacity and lens transmittance due to the molecular dispersion of bimatoprost on the surface of the GO which prevented the local precipitation of the drug. The bimatoprost uptake was not improved in the presence of GO. However, its in vitro release profile was improved. Adding bimatoprost and GO at the same time as lenses were polymerized (DL-GO-BMT) significantly decreased the loss of drug during extraction and sterilization in comparison to contact lenses (DL-BMT) without GO. As the amount of GO was increased, the DL-GO-BMT lenses showed a significant decrease in the burst and cumulative release of bimatoprost. Ocular irritation and histopathology reports demonstrated the safety of GO contact lens. The in vivo pharmacokinetic studies in the rabbit tear fluid showed significant improvement in mean residence time (MRT) and area under the curve (AUC) with DL-GO-0.2 μg-BMT-100 contact lens in comparison to eye drop solution. The study demonstrated that the addition of GO to contact lenses can control the release of bimatoprost as well as improved the lens swelling and transmittance. However, further optimization is needed to modulate the release of drug within the therapeutic level to manage glaucoma.

Nose to brain delivery of tailored clozapine nanosuspension stabilized using (+)-alpha-tocopherol polyethylene glycol 1000 succinate: Optimization and in vivo pharmacokinetic studies

Clozapine is widely used to treat schizophrenia as an atypical antipsychotic. Low solubility, poor dissolution rate, degradation in the gastrointestinal tract, high hepatic first-pass metabolism, and eventually less drug transfer in the brain are all issues with oral clozapine administration. On account of this poor pharmacokinetic parameters, the authors aimed to develop clozapine nanosuspension using (+)-alpha-tocopherol polyethylene glycol 1000 succinate (TPGS) and polyvinylpyrrolidone K-30 (PVP K-30) and deliver it through the intranasal route. The nanosuspension was prepared by the high-speed homogenization method with 3² full factorial design for optimization of the product. Quality Target Product Profile (QTPP) was enlisted before the product development. The amount of TPGS and speed of homogenizer were selected as independent variables whereas, particle size and drug permeation profile after 24 h (Y₂, %) were selected as dependent variables. As per the results of optimization, amount of TPGS and speed of homogenizer were chosen as 0.1% and 7000 rpm, respectively. The particle size of the optimized nanosuspension of clozapine was found to be 281 nm. The conversion of clozapine crystals to an amorphous form was verified by characterization studies (XRD and DSC). The drug permeability study showed 96.15% and 41.12% clozapine release after 24 h from nanosuspension and conventional suspension, respectively. The study of nasal cilio-toxicity (histopathological studies) demonstrated the appropriateness of nanosuspension for intranasal purposes. The single-dose in vivo pharmacokinetic analysis in the rat model showed a substantial increase in the therapeutic concentration of clozapine in the brain tissue in the case of intranasal nanosuspension (dose = 0.05 mg drug/0.1 mL, C_max = 8.62 ± 0.45 μg/g, t_max = 1 h) compared to conventional oral clozapine suspension (dose = 26.43 mg drug/0.158 mL, C_max = 1.14 ± 0.12 μg/g, t_max = 1 h).Ultimately, in the case of an intranasal route, a 3.56-fold increase in brain drug concentration was observed with a 528-fold lower drug dose compared with oral administration. The results suggest that clozapine nanosuspension may be used for successful nose-to-brain delivery.

Tailored Doxycycline Hyclate Loaded In Situ Gel for the Treatment of Periodontitis: Optimization, In Vitro Characterization, and Antimicrobial Studies

Currently, periodontitis is treated by oral dosage forms (antibiotics) which shows systemic side effects and failed to reach the therapeutic concentration (above minimum inhibitory concentration, MIC) in the periodontal pocket. The present study aimed to overcome the above issues, by designing tailored doxycycline hyclate laden in situ gel by Poloxamer 407, chitosan, and polyethylene glycol 600. The in situ gel-forming system has attracted attention owing to its ability of sustained drug release above MIC, easy administration (syringeability), and high drug retention (localization) in the periodontal cavity. The Box-Behnken design (BBD) was used to tailor and optimize the concentration of Poloxamer 407 (X₁ = 14.3%), chitosan (X₂ = 0.58%), and polyethylene glycol 600 (X₃ = 1.14%) to achieve sufficient syringeability (149 N), t_90% (1105 min), and viscosity at non-physiological condition (512 cps) and physiological condition (5415 cps). The optimized in situ gel was clear and isotonic (RBCs test). The gelation temperature of the optimized in situ was 34 ± 1°C with sufficient mucoadhesive strength (26 ± 2 dyn/cm²), gel strength (29 ± 2 sec), and texture profile for periodontal application. The in vitro drug release studies showed sustain release from optimized in situ gel (24h) in comparison to marketed gel (7h). The antimicrobial activity (cup plate technique) of the in situ gel was equivalent to the marketed doxycycline gel, which suggests that the doxycycline hyclate retained its antimicrobial efficacy when formulated as in situ gelling system. In conclusion, BBD was effectively utilized to optimize in situ gel with minimum level of polymers to achieve the required characteristics of the in situ gel for sustaining drug delivery to treat periodontitis.

Novel Poly(vinylpyrrolidone)-Coated Silicone Contact Lenses to Improve Tear Volume During Lens Wear: In Vitro and In Vivo Studies

Poly(vinylpyrrolidone) (PVP-K90) is widely used to manage dry eye syndrome (DES). The marketed eye drop solutions (high dose) need frequent instillation, affecting the routine lifestyle of patients. PVP-K90-laden contact lenses can be used to overcome the limitations of eye drop solutions (low bioavailability and frequent instillation). However, the conventional methods of PVP-K90 loading show poor loading capacity and short duration of effect. In the present study, we have developed PVP-K90-coated contact lenses via a short curing approach to increase the PVP-K90 loading capacity with a sustained release profile to manage dry eye syndrome. PVP-K90 was loaded by a soaking method (SM-PVP), direct loading (during fabrication, DL-PVP), a combination of soaking and direct loading (DL-SM-PVP), and a novel coating process (SM-PVP-C and DL-SM-PVP-C). The swelling studies suggested improvement in the water uptake (hydration) property of the contact lenses due to the presence of PVP-K90. The optical transparency was within an acceptable range. The in vitro release of PVP-K90 was in the following order: PVP-coated contact lens (168 h) > DL-SM-PVP (168 h) > DL-PVP (96 h) > SM-PVP (72-96 h). PVP-coated contact lenses showed a high burst effect (lubricating effect) and sustained release (3161-448 ng/h between 24 and 168 h) due to high PVP loading/coating in comparison to the uncoated respective contact lenses (964-113 ng/h between 24 and 96 h). In animal studies, the PVP-K90-coated contact lens showed higher tear volume in comparison to the respective uncoated contact lenses and an eye drop solution. This study demonstrates a novel approach of coating a high amount of PVP-K90 on contact lenses for sustained release to manage several ocular diseases like dry eye syndrome, conjunctivitis, and other ocular injuries.