Scalable Liposome Synthesis by High Aspect Ratio Microfluidic Flow Focusing

Microfluidic flow focusing provides an efficient approach to the generation of nanoscale lipid vesicles of tunable size and low size variance. Scalable nanoliposome synthesis over a wide range of production rates can be readily achieved using a high aspect ratio flow focusing device fabricated by widely available additive manufacturing methods. Here we detail methods for the manufacture and operation of a 3D-printed microfluidic flow focusing technology enabling the synthesis of liposomes with modal diameters ranging from ca. 50-200 nm at production rates up to several hundred milligrams lipid per hour.

Microfluidic device fabrication by thermoplastic hot-embossing

Due to their low cost compatibility with replication-based fabrication methods, thermoplastics represent an exceptionally attractive family of materials for the fabrication of lab-on-a-chip platforms. A diverse range of thermoplastic materials suitable for microfluidic fabrication is available, offering a wide selection of mechanical and chemical properties that can be leveraged and further tailored for specific applications. While high-throughput embossing methods such as reel-to-reel processing of thermoplastics is an attractive method for industrial microfluidic chip production, the use of single chip hot embossing is a cost-effective technique for realizing high-quality microfluidic devices during the prototyping stage. Here we describe methods for the replication of microscale features in two thermoplastics, polymethylmethacrylate (PMMA) and polycarbonate (PC), using hot embossing from a silicon template fabricated by deep reactive-ion etching.

Rapid microfluidic perfusion enabling kinetic studies of lipid ion channels in a bilayer lipid membrane chip

There is growing recognition that lipids play key roles in ion channel physiology, both through the dynamic formation and dissolution of lipid ion channels and by indirect regulation of protein ion channels. Because existing technologies cannot rapidly modulate the local (bio)chemical conditions at artificial bilayer lipid membranes used in ion channel studies, the ability to elucidate the dynamics of these lipid-lipid and lipid-protein interactions has been limited. Here we demonstrate a microfluidic system supporting exceptionally rapid perfusion of reagents to an on-chip bilayer lipid membrane, enabling the responses of lipid ion channels to dynamic changes in membrane boundary conditions to be probed. The thermoplastic microfluidic system allows initial perfusion of reagents to the membrane in less than 1 s, and enables kinetic behaviors with time constants below 10 s to be directly measured. Application of the platform is demonstrated toward kinetic studies of ceramide, a biologically important lipid known to self-assemble into transmembrane ion channels, in response to dynamic treatments of small ions (La(3+)) and proteins (Bcl-x(L) mutant). The results reveal the broader potential of the technology for studies of membrane biophysics, including lipid ion channel dynamics, lipid-protein interactions, and the regulation of protein ion channels by lipid micro domains.

Nanofilament silicon for matrix-free laser desorption/ionization mass spectrometry

Mass spectrometry (MS) provides quantitative information toward accurate mass identification of unknown molecules and has become a powerful and widely used technique for bioanalysis. In this chapter, we describe the fabrication and MS analysis steps for a high sensitivity matrix-free laser desorption/ionization mass spectrometry (LDI-MS) target substrate termed nanofilament silicon (nSi). Unlike other nanostructured porous silicon surfaces, nSi possesses an open pore morphology with associated benefits including efficient transport of sample into the nanopores and effective removal of solvent from the surface. The utility of nSi targets for LDI-MS analysis lies primarily in the analysis of small molecules, which are typically less than 5,000 Da with a detection sensitivity in the attomole range.

Mixed-mode electrokinetic and chromatographic peptide separations in a microvalve-integrated polymer chip

A cycloolefin polymer chip supporting the concatenation of isoelectric focusing (IEF) and reversed-phase liquid chromatography (RPLC) is demonstrated for high throughput two dimensional peptide separations. A unique benefit of the mixed-mode platform is the ability of IEF to act as a highly concentrating electrokinetic separation mode for effective isolation of sample components prior to RPLC. The thermoplastic chip contains integrated high pressure microvalves, enabling uniform sample transfer from the IEF channel to multiple parallel RPLC channels, gradient elution from each RPLC column, and hydrodynamic isolation between the separation dimensions. The reusable system is shown to provide efficient 2-D separations together with facile interfacing with MALDI-MS, suggesting a new path towards effective peptide analysis from complex samples.

Microfluidic 2-D PAGE using multifunctional in situ polyacrylamide gels and discontinuous buffers

A two-dimensional microfluidic system is presented for intact protein separations combining isoelectric focusing (IEF) and sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE) employing in situ photopolymerized polyacrylamide (PAAm) gels. The PAAm gels are used for multiple functions. In addition to serving as a highly-resolving separation medium for gel electrophoresis, discrete polyacrylamide gel plugs are used to enable the efficient isolation of different on-chip media including anolyte, catholyte, and sample/ampholyte solutions for IEF. The gel plugs are demonstrated as on-chip reagent containers, holding defined quantities of SDS for on-chip SDS-protein complexation, and enabling the use of a discontinuous buffer system for sample band sharpening during SDS-PAGE. The 2-D chip also employs several unique design features including an angled isoelectric focusing channel to minimize sample tailing, and backbiasing channels designed to achieve uniform interdimensional sample transfer. Separation results using E. coli cell lysate are presented using a 10-channel chip with and without the discontinuous buffer system, with resolving power more than doubled in the former case. Further improvements in separation resolution are demonstrated using a 20-channel chip design.

Membrane Proteome Analysis of Microdissected Ovarian Tumor Tissues Using Capillary Isoelectric Focusing/Reversed-Phase Liquid Chromatography−Tandem MS

This work expands our tissue proteome capabilities from the analysis of soluble proteins in previous studies to the examination of membrane proteins within the pellets of enriched and selectively isolated tumor cells procured from microdissected tissue specimens. The pellets of targeted ovarian tumor cells are treated by two different membrane protein extraction methods, including the use of detergent and organic solvent. The detergent-based membrane protein preparation protocol not only extracts proteins effectively from cell pellets but also is compatible with subsequent proteome analysis using combined capillary isoelctric focusing/nano reversed-phase liquid chromatography separations coupled with nano electrospray ionization mass spectrometry. Among proteins identified from an amount of pellet equivalent to 20 000 cells, 773 proteins are predicted to contain one or more transmembrane domains, corresponding to 22% membrane proteome coverage within the SwissProt Human protein sequence entries.

Characterization of the human salivary proteome by capillary isoelectric focusing/nanoreversed-phase liquid chromatography coupled with ESI-tandem MS

Saliva is a readily available body fluid with great diagnostic potential. The foundation for saliva-based diagnostics, however, is the development of a complete catalog of secreted and "leaked" proteins detectable in saliva. By employing a capillary isoelectric focusing-based multidimensional separation platform coupled with electrospray ionization tandem mass spectrometry (MS), a total of 5338 distinct peptides were sequenced, leading to the identification of 1381 distinct proteins. A search of bacterial protein sequences also identified many peptides unique to several organisms and unique to the NCBI nonredundant database. To the best of our knowledge, this proteome study represents the largest catalog of proteins measured from a single saliva sample to date. Data analysis was performed on individual MS/MS spectra using the highly specific peptide identification algorithm, OMSSA. Searches were conducted against a decoyed SwissProt human database to control the false-positive rate at 1%. Furthermore, the well-curated SwissProt sequences represent perhaps the least redundant human protein sequence database (12,484 records versus the 50,009 records found in the International Protein Index human database), therefore minimizing multiple protein inferences from single peptides. This combined bioanalytical and bioinformatic approach has established a solid foundation for building up the human salivary proteome for the realization of the diagnostic potential of saliva.

Proteome analysis of microdissected tumor tissue using a capillary isoelectric focusing-based multidimensional separation platform coupled with ESI-tandem MS

This study demonstrates the ability to perform sensitive proteome analysis on the limited protein quantities available through tissue microdissection. Capillary isoelectric focusing combined with nano-reversed-phase liquid chromatography in an automated and integrated platform not only provides systematic resolution of complex peptide mixtures based on their differences in isoelectric point and hydrophobicity but also eliminates peptide loss and analyte dilution. In comparison with strong cation exchange chromatography, the significant advantages of electrokinetic focusing-based separations include high resolving power, high concentration and narrow analyte bands, and effective usage of electrospray ionization-tandem MS toward peptide identifications. Through the use of capillary isoelectric focusing-based multidimensional peptide separations, a total of 6866 fully tryptic peptides were detected, leading to the identification of 1820 distinct proteins. Each distinct protein was identified by at least one distinct peptide sequence. These high mass accuracy and high-confidence identifications were generated from three proteome runs of a single glioblastoma multiforme tissue sample, each run consuming only 10 microg of total protein, an amount corresponding to 20,000 selectively isolated cells. Instead of performing multiple runs of multidimensional separations, the overall peak capacity can be greatly enhanced for mining deeper into tissue proteomics by increasing the number of CIEF fractions without an accompanying increase in sample consumption.

Polymer Nanochannels Fabricated by Thermomechanical Deformation for Single-Molecule Analysis

A simple method for fabricating nanoscale channels based on thermomechanical deformation of rigid polymer substrates is demonstrated. Polycarbonate preforms containing microchannels with cross-sectional dimensions on the order of tens of micrometers are controllably deformed to produce submicrometer dimensions. The reduced channel dimensions are achieved by heating the preform while applying a uniaxial tensile force to reduce channel cross sections through the Poisson effect. Nanochannels with circular or elliptical cross sections are defined by varying the channel position and preform geometry prior to deformation. Arrays of parallel nanochannels with critical dimensions down to 400 nm are described. Using the fabrication method, a nanochannel network is fabricated for the detection of single protein molecules via confocal fluorescence microscopy. The chip includes a detection channel with cross-sectional dimensions approaching the confocal volume dimensions of the detection optics and a larger adjacent reference channel used to optimize focusing. Detection of fluorescently labeled bovine serum albumin at 15 and 150 nM concentrations is presented, demonstrating the ability to perform single-molecule fluorescence measurements in polycarbonate chips using visible wavelengths for excitation and detection.