Urinary volatile Organic compounds in non-alcoholic fatty liver disease (NAFLD), type two diabetes mellitus (T2DM) and NAFLD-T2DM coexistence

INTRODUCTION

Accumulating evidence have shown a significant correlation between urinary volatile organic compounds (VOCs) profile and the manifestation of several physiological and pathological states, including liver diseases. Previous studies have investigated the urinary metabolic signature as a non-invasive tool for the early discrimination between non-alcoholic fatty liver (NAFL) and non-alcoholic steatohepatitis (NASH), which nowadays represents one of the most important challenges in this context, feasible only by carrying out liver biopsy.

OBJECTIVES

The aim of the study was to investigate the differences in the urinary VOCs profiles of non-alcoholic fatty liver disease (NAFLD) patients, diabetes mellitus (T2DM) subjects and NAFLD/T2DM patients.

METHODS

Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was applied to profile the urinary VOCs. Urine samples were analysed both under acid and alkaline conditions, to obtain a range of urinary volatiles with different physicochemical properties.

RESULTS

Urinary VOCs profiles of 13 NAFLD patients, 13 T2DM subjects and 13 NAFLD/T2DM patients were investigated by multivariate and univariate data analysis techniques which allowed to identify 21 volatiles under alkaline conditions able to describe the NAFLD/T2DM group concerning the other two groups.

CONCLUSION

Our results suggest that VOCs signatures can improve the knowledge of the pathological condition where NAFLD coexists with T2DM and discovering new features that are not simply the sum of the two diseases. These preliminary findings may be considered as hypothesis-generating, to be clearly confirmed by larger prospective investigations.

Unopposed estrogens: current and future perspectives

Estrogens and progestogens act on female reproductive tissues in opposite ways. As they counteract each other actions, the correct balance between these two classes of hormones is pivotal to avoid dangerous states. Unopposed estrogens occur when progestogen levels do not balance estrogens, primarily deriving from overproduction of estrogens via aromatase enzyme. In the endometrium, unopposed estrogens induce proliferative or invasive phenomena, which represent the first step toward different diseases. These pathologies include endometrial hyperplasia, endometrial polyps, endometriosis and adenomyosis. Endometrial hyperplasia and polyps are proliferative pathologies, while endometriosis and adenomyosis are characterized by the invasion of other tissues by endometrial cells. Current pharmacological treatments include Gonadotropin-Releasing-Hormone analogs, aromatase inhibitors and progestogens, either alone or in combination with estrogens. As these drugs usually lead to burdensome undesired effects, researchers seek to find new therapeutical molecules. Recent literature highlights the positive effects of metformin, an insulin sensitizing drug that reduces the insulin proliferative stimulus on the endometrium. d-chiro-inositol is an insulin second messenger with insulin sensitizing and mimetic properties, recently described as an aromatase down-regulator. Based on current evidence, d-chiro-inositol may be useful to treat the pathologies responsive to unopposed estrogens.

Investigating site-selection mechanisms of retroviral integration in supercoiled DNA braids

We theoretically study the integration of short viral DNA in a DNA braid made up by two entwined double-stranded DNA molecules. We show that the statistics of single integration events substantially differ in the straight and buckled, or plectonemic, phase of the braid and are more likely in the latter. We further discover that integration is most likely close to plectoneme tips, where the larger bending energy helps overcome the associated energy barrier and that successive integration events are spatio-temporally correlated, suggesting a potential mechanistic explanation of clustered integration sites in host genomes. The braid geometry we consider provides a novel experimental set-up to quantify integration in a supercoiled substrate in vitro, and to better understand the role of double-stranded DNA topology during this process.

The use of D-chiro-Inositol in clinical practice

OBJECTIVE

D-chiro-Inositol has been widely used in clinical practice to induce ovulation in women with polycystic ovary syndrome. Only recent evidence established that this molecule acts through two different mechanisms, with potentially different outcomes. On the one hand, under a metabolic perspective, D-chiro-Inositol improves insulin signaling, thus restoring physiological insulin levels in resistant subjects. On the other hand, at a cellular level, it downregulates the expression of steroidogenic enzyme aromatase, which is responsible for the conversion of androgens to estrogens.

MATERIALS AND METHODS

We reviewed current literature in different databases, searching for D-chiro-Inositol in relation with one of the following keywords: myo-inositol, PCOS, infertility, insulin resistance, aromatase, androgen and inositol, testosterone, estrogen and inositol, estradiol, hypogonadotropic hypogonadism, fat tissue, estrogens and cancer, anovulation, uterine myoma, endometriosis, endometrial hyperplasia.

RESULTS

D-Chiro-Inositol treatment may be helpful in restoring physiological hormonal levels in various clinical disorders. However, D-Chiro-Inositol intervention should be carefully designed to avoid possible undesired side effects stemming from its multiple mechanisms of action.

CONCLUSIONS

We evaluated the optimal D Chiro-Inositol administration for different pathologies, defining dosages and timing. Even though further studies are required to validate our preliminary results, this paper is primarily intended to guide researchers through some of the pathways of D-Chiro-Inositol.

The prognostic impact of the extent of ulceration in patients with clinical stage I-II melanoma: a multicentre study of the Italian Melanoma Intergroup (IMI)

BACKGROUND

The presence of ulceration has been recognized as an adverse prognostic factor in primary cutaneous melanoma (PCM).

OBJECTIVES

To investigate whether the extent of ulceration (EoU) predicts relapse-free survival (RFS) and overall survival (OS) in PCM.

MATERIALS AND METHODS

We retrieved data for 477 patients with ulcerated PCM from databases of the Italian Melanoma Intergroup. Univariate and multivariable Cox proportional hazard models were used to assess the independent prognostic impact of EoU.

RESULTS

A significant interaction emerged between Breslow thickness (BT) and EoU, considering both RFS (P < 0·0001) and OS (P = 0·0006). At multivariable analysis, a significant negative impact of EoU on RFS [hazard ratio (HR) (1-mm increase) 1·26, 95% confidence interval (CI) 1·08-1·48, P = 0·0047] and OS [HR (1-mm increase) 1·25, 95% CI 1·05-1·48, P = 0·0120] was found in patients with BT ≤ 2 mm, after adjusting for BT, age, tumour-infiltrating lymphocytes, sentinel lymph node status and mitotic rate. No impact of EoU was found in patients with 2·01-4 mm and > 4 mm BT.

CONCLUSIONS

This study demonstrates that EoU has an independent prognostic impact in PCM and should be recorded as a required element in pathology reports.

Radiobiological quantities in proton-therapy: Estimation and validation using Geant4-based Monte Carlo simulations

PURPOSE

The Geant4 Monte Carlo simulation toolkit was used to reproduce radiobiological parameters measured by irradiating three different cancerous cell lines with monochromatic and clinical proton beams.

METHODS

The experimental set-up adopted for irradiations was fully simulated with a dedicated open-source Geant4 application. Cells survival fractions was calculated coupling the Geant4 simulations with two analytical radiobiological models: one based on the LEM (Local Effect Model) approach and the other on a semi-empirical parameterisation. Results was evaluated and compared with experimental data.

RESULTS AND CONCLUSIONS

The results demonstrated the Geant4 ability to reproduce radiobiological quantities for different cell lines.

Sentinel Node Mapping for Malignant Melanoma

Sixty-seven patients with malignant melanomas were seen in our institute since 1998. We looked for a sentinel node in 26 (38%) patients with lesions thicker than 1 mm, employing a double technique: staining with methylene blue and gamma probe mapping after injection of 99mTc. Forty-six nodes were retrieved, 25% of them containing tumor cells. This approach enabled us to choose between a wait-and-see policy and radical surgery.

Neurotrophin-mimicking peptides at the biointerface with gold respond to copper ion stimuli

The peptide fragments NGF_1-14 and BDNF_1-12, encompassing the N-terminal domains, respectively, of the proteins nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF) were used in this study for the fabrication of a hybrid gold/peptide biointerface. These peptides mimic the Trk receptor activation of the respective whole protein - with a crucial role played by copper ions - and exhibit, in bulk solution, a pH-dependent capability to complex copper. We demonstrate here the maintenance of peptide-specific responses at different pH values as well as the copper binding also for the adlayers formed upon physisorption at the gold surface. The physicochemical properties, including viscoelastic behavior of the adlayer and competitive vs. synergic interactions in sequential adsorption processes, were addressed both experimentally, by quartz crystal microbalance with dissipation monitoring (QCM-D) and circular dichroism (CD), and theoretically, by molecular dynamics (MD) calculations. Proof-of work biological assays with the neuroblastoma SY-SH5H cell line demonstrated that the developed hybrid Au/peptide nanoplatforms are very promising for implementation in pH- and metal-responsive systems for application in nanomedicine.

Iterative control strategies for nonlinear systems

In this paper, we focus on the control of the mean-field equilibrium of nonlinear networks of the Langevin type in the limit of small noise. Using iterative linear approximations, we derive a formula that prescribes a control strategy in order to displace the equilibrium state of a given system and remarkably find that the control function has a "universal" form under certain physical conditions. This result can be employed to define universal protocols useful, for example, in the optimal work extraction from a given reservoir. Generalizations and limits of application of the method are discussed.

Direct Route to Colloidal UHMWPE by Including LLDPE in Solution during Homogeneous Polymerization of Ethylene

The usual aggregation and precipitation driven by crystallization of nascent PE during homogeneous polymerization of ultra-high molecular weight polyethylene (UHMWPE) is inhibited by including linear low-density polyethylene (LLDPE) in the catalyst solution prior to addition of ethylene monomer. Co-crystallization of newly formed PE and dissolved LLDPE creates a polymer brush on the fold surfaces of the nascent crystallites. Consequently, aggregation is inhibited by steric stabilization. Scanning electron microscopy (SEM) images show that individual lamellae (approximately 10-20 nm thick) typically have lateral dimensions of 0.5 μm × 3.5 μm and form "bowtie" shaped stacks that are approximately 200-500 nm thick. This simple method for stabilizing nascent crystals against precipitation is enabling fundamental studies of their metastable "disentangled" state and may open scalable routes to compounding UHMWPE.

Serum elements and oxidative status in clinically isolated syndromes: imbalance and predictivity

BACKGROUND

Metals are suspected of being involved in the pathogenesis of various neurologic diseases. We previously found a complex imbalance in serum chemical elements and oxidative status in patients with clinically definite multiple sclerosis (CDMS).

OBJECTIVE

To understand whether this imbalance affects people with clinically isolated syndrome (CIS) and, if so, whether it predicts conversion to CDMS.

METHODS

We studied 22 chemical elements and the oxidative status in 49 patients with CIS, 49 patients with CDMS, and 49 healthy donors (HD). Univariate and multivariate approaches were used to identify profiles for each group. A logistic regression analysis was used to identify the predictive potential of baseline data (elements, oxidative status, and MRI findings) for conversion to CDMS over 36 months.

RESULTS

Several elements and oxidative status values differed significantly among the 3 groups. Discriminant analysis revealed a major contribution of Ca, Fe, Sn, Zn, serum antioxidant capacity, and serum oxidative status, which resulted in distinct profiles (the prediction of group membership was 96% [cross-validated 92%] for HD, 92% [cross-validated 92%] for CDMS, and 90% [cross-validated 86%] for CIS). A weighted combination of element concentrations and oxidative status values, adjusting for all other predictors, would predict a reduction in the risk of conversion to CDMS within 3 years (odds ratio 0.37; 95% confidence interval 0.18-0.76; p = 0.007), thereby proving more effective than MRI at baseline.

CONCLUSIONS

The peculiar imbalance in serum elements and oxidative status that characterizes patients with CIS and may predict conversion to CDMS warrants studies on larger sample sizes.

A multiscale study of electronic structure and quantum transport in C(6n(2))H(6n)-based graphene quantum dots

We implement a bottom-up multiscale approach for the modeling of defect localization in C(6n(2))H(6n) islands, i.e. graphene quantum dots with a hexagonal symmetry, by means of density functional and semiempirical approaches. Using the ab initio calculations as a reference, we recognize the theoretical framework under which semiempirical methods adequately describe the electronic structure of the studied systems and thereon proceed to the calculation of quantum transport within the nonequilibrium Green function formalism. The computational data reveal an impurity-like behavior of vacancies in these clusters and evidence the role of parameterization even within the same semiempirical context. In terms of conduction, failure to capture the proper chemical aspects in the presence of generic local alterations of the ideal atomic structure results in an improper description of the transport features. As an example, we show wavefunction localization phenomena induced by the presence of vacancies and discuss the importance of their modeling for the conduction characteristics of the studied structures.

Ab Initio Prediction of Boron Compounds Arising from Borozene: Structural and Electronic Properties

Structure and electronic properties of two unusual boron clusters obtained by fusion of borozene rings have been studied by means of first principles calculations based on the generalized-gradient approximation of the density functional theory. Moreover, a semiempirical tight-binding model has been appropriately calibrated for transport calculations on these clusters. Results show that the pure boron clusters are topologically planar and characterized by (3c-2e) bonds, which can explain, together with the aromaticity (estimated by means of NICS), the remarkable cohesive energy values obtained. Such feature makes these systems competitive with the most stable boron clusters to date. The energy gap values indicate that these clusters possess a semiconducting character, while when the larger system is considered, zero-values of the density of states are found exclusively within the HOMO-LUMO gap. Electron transport calculations within the Landauer formalism confirm these indications, showing semiconductor-like low bias differential conductance for these structures. Differences and similarities with carbon clusters are highlighted in the discussion.

A pilot study on the content and the release of Ni and other allergenic metals from cheap earrings available on the Italian market

The capability of alloys used in cheap jewellery to release metal ions on contact with the skin causing allergic contact dermatitis (ACD) is generally acknowledged. To reduce the diffusion of the Ni-induced ACD the Council Directive 94/27/EC [Council Directive 94/27/EC of 30 June 1994. Official Journal L 188, 22/07/1994, 1.] limited the total Ni content in alloys and its release rate in artificial sweat. In this work, three different aspects were explored: i) the frequency of skin sensitization to Ni-containing earrings in patients before and after the introduction of the Directive's limit; ii) metal composition of alloys by X-ray analysis; iii) metal leaching in artificial sweat followed by Sector Field Inductively Coupled Plasma Mass Spectrometry (SF-ICP-MS) quantification. Well-known allergenic metals, as Ni, Cr and Co, and possible emergent allergens, as Al, Ag, Au, Cd, Cu, Fe, Ir, Mn, Pb, Pd, Pt, Rh, Sn, V and Zn, were studied. Results showed that the frequency of allergy due to earrings did not decrease after the introduction of the Ni limit: in 1994 and in 2005 patients positive to Ni patch tests were 54.3% and 53.5%, respectively. The earring components analyzed were Fe-based or alloys of Cu/Zn or Fe/Cr/Ni, plated with a thin film of precious metal (Ag, Au) which, in several cases, was combined with a Ni layer beneath. Five out of 10 items were not in compliance with the Ni Directive 94/27/EC having a total Ni content >0.05%. In three cases the release of Ni concentrations was higher than the safe sensitizing limit given by the above mentioned Regulation (i.e., <0.5 microg/cm(2)/week). The release of Cu and Zn was very variable among the different pieces (Cu: 0.134-30.9 microg/cm(2)/week; Zn: 0.141-160 microg/cm(2)/week); two objects released high amounts of Fe (358 and 586 microg/cm(2)/week) and one released considerable Mn (21 microg/cm(2)/week). Lead was released from 70% of the objects, while Ag, Al, Cd, Co, Cr and Sn from ca. 30% of the items and concentrations of these elements were well below 0.5 microg/cm(2)/week. Vanadium was released by only one item whereas Au, Ir, Pd, Pt and Rh were never leached.

Levels of nickel and other potentially allergenic metals in Ni-tested commercial body creams

It is extensively well-known that Ni and other metals occurring as impurities in cosmetic products might give rise to contact dermatitis in subjects with pre-existing allergy. The present study on the content of 13 metals (Cd, Co, Cr, Cu, Hg, Ir, Mn, Ni, Pb, Pd, Pt, Rh, and V) in moisturizing creams, labelled as "Ni-tested" (i.e., Ni content <100 ng g(-1)) and available on the Italian market, provides a basis for assessing their safety for consumers. Quantification of metals was performed by sector field inductively coupled plasma mass spectrometry after microwave-assisted acid digestion of products. The developed method had limits of quantification less than 0.8 ng g(-1) for all the elements; recovery was in the interval 88% (Cd, Co) to 110% (Hg), and precision was always under 7%. Nickel was present in all the products with levels between 17.5 and 153 ng g(-1); three skin creams were slightly above the concentration reported on the label. The other elements were at levels below 1 microg g(-1). The highest concentrations, in ng g(-1), of Co, Cr, Cu, and Mn were 222, 303, 51.2, and 59.9, respectively. Mean Cd, Pb, and V were below 5 ng g(-1), while Hg was absent in all the samples. Among the new emergent allergens, Ir and Rh were in traces or even undetectable, while Pt had levels of 2.65 and 6.28 ng g(-1) in two creams and Pd was equal to 1.07 ng g(-1) in one product. The overall results are below the sensitizing limit proposed for consumer products and, thus, probably have no significant toxicological effects. Nevertheless, some creams presented amounts of Co and Cr comparable to those of Ni and therefore they have to be monitored in consideration of their cross-reactivity as well.

Metal changes in CSF and peripheral compartments of parkinsonian patients

BACKGROUND

Involvement of metals in the risk of developing Parkinson's disease (PD) has been suggested. In the present study, concentration of metals in cerebrospinal fluid (CSF), blood, serum, urine and hair of 91 PD patients and 18 controls were compared.

METHODS

Blood and hair were microwave digested, while CSF, serum and urine were water-diluted. Elements quantification was achieved by Inductively Coupled Plasma Atomic Emission Spectrometry and Sector Field Inductively Coupled Plasma Mass Spectrometry.

RESULTS

Some metal imbalances in PD were observed: i), in CSF, lower Fe and Si; ii), in blood, higher Ca, Cu, Fe, Mg and Zn; iii), in serum, lower Al and Cu; iv), in urine, lower Al and Mn, higher Ca and Fe; and v), in hair, lower Fe. The ROC analysis suggested that blood Ca, Fe, Mg and Zn were the best discriminators between PD and controls. In addition, hair Ca and Mg were at least 1.5 times higher in females than in males of patients and controls. A decrement with age of patients in hair and urine Ca and, with less extent, in urine Si was observed. Magnesium concentration in CSF decreased with the duration and severity of the disease. Elements were not influenced by the type of antiparkinsonian therapy.

CONCLUSIONS

Variation in elements with the disease do not exclude their involvement in the neurodegeneration of PD.

Biomonitoring of a worker population exposed to platinum dust in a catalyst production plant

AIMS

To evaluate the occupational exposure to platinum in an industrial plant engaged in the production, recovery, and recycling of catalytic converters for the automotive traction and chemical industries.

METHODS

Pt was determined in airborne particulate matter, and blood, urine, and hair of 106 exposed workers, 21 controls from the plant's administrative offices, and 25 unexposed subjects.

RESULTS

The highest air Pt level was found in the department of the plant in which supports are coated with acid metal solutions, where values of 2.39 and 4.83 microg/m3 respectively were found in environmental airborne particulate matter and in air collected using personal sampler devices. The percentage of soluble Pt was also highest in this area, varying from 24% to 44% of the total. The biological data confirmed this trend, with mean concentrations in this site being higher than in other working areas: 1.86 microg/l (urine), 0.38 microg/l (blood), and 2.26 microg/kg (hair). The workers employed in the administrative sector, who were not directly exposed to Pt, had levels of contaminant lower than those of other workers, albeit 2-20 times higher than those of external controls. High correlations were obtained between Pt levels detected in airborne samples using personal devices and those found in urine and hair, but not in blood.

CONCLUSIONS

The background level of Pt in all areas of the factory implies widespread exposure for the workers. The most reliable biomarker was urine. Hair cannot be considered a good index of time related exposure, at least until more reliable methods of washing can be found that are able to remove exogenous Pt completely.

Uncertainty of inductively coupled plasma mass spectrometry based measurements: an application to the analysis of urinary barium, cesium, antimony and tungsten

The wide use of barium (Ba), cesium (Cs), antimony (Sb) and tungsten (W) in many industrial and agricultural fields causes the increased release of these metals into the environment, laying the basis for health risk. To assess the exposure for the general population, the development of adequate and reliable analytical techniques becomes compulsory. This study refers to the quantification of urinary Ba, Cs, Sb and W levels by both quadrupole (Q) and sector field (SF) inductively coupled plasma mass spectrometry (ICP-MS). The two procedures were compared for their performances and their measurement uncertainties. The limits of detection were (Q and SF) 23.0 and 5.21 ng L(-1) for Ba; 21.1 and 7.52 ng L(-1) for Cs; 1.09 and 0.43 ng L(-1) for Sb; and 0.36 and 0.49 ng L(-1) for W. The trueness was better than 93.3% and the precision less than 12% for both techniques. Relative expanded uncertainties of the analytical procedures, at the median levels found in the general population, were below 5% for all the elements with both ICP-MS techniques. The uncertainties related to the calibration and repeatability were the parameters most influencing the final analytical performance. The urinary median values observed in healthy subjects from central Italy were 1146, 4301, 60.8 and 48.5 ng L(-1) for Ba, Cs, Sb and W, respectively.

Assessment of workers’ exposure to palladium in a catalyst production plant

Airborne particulate matter was collected and biomonitoring of workers was performed by sampling blood, urine and hair of 84 exposed subjects, 17 occasionally exposed employees, 21 controls from administrative offices and 25 unexposed people (external controls). Determination of Pd was performed using Quadrupole and High Resolution Inductively Coupled Plasma Mass Spectrometry. The Production of Catalysts Department and the Refining Service presented the highest levels of Pd in airborne matter collected by means of an area sampler. The highest level of soluble Pd (1.66 microg m(-3)) was found in the Production of Catalysts Department. The highest concentration of Pd in airborne matter, collected by means of personal devices (7.90 microg m(-3)) was found in the Refining Service. Hair showed a clear distribution pattern among departments, with values ranging from 0.60 to 5.54 microg g(-1). Administrative workers presented blood levels of Pd between 2 and 500 times higher than external controls. Only urine levels correlated with the measurements of airborne Pd collected with personal devices. A very strong association between airborne Pd collected by personal devices and Pd levels in hair (r(2)= 0.569, with p< or = 0.01) and urine (r(2)= 0.684, with p< or = 0.01) was found. On the basis of these findings: (i) blood results appear to be an unsuitable biological marker for occupational exposure to Pd; (ii) urine could be considered as a satisfactorily responsive bio-marker for occupational monitoring; and (iii) hair cannot be considered a good index of time-related exposure.

Trace and major elements in whole blood, serum, cerebrospinal fluid and urine of patients with Parkinson's disease

Quantifications of Al, Ca, Cu, Fe, Mg, Mn, Si and Zn were performed in urine, serum, blood and cerebrospinal fluid (CSF) of 26 patients affected by Parkinson's disease (PD) and 13 age-matched controls to ascertain the potential role of biological fluids as markers for this pathology. Analyses were performed by Inductively Coupled Plasma Atomic Emission Spectrometry and Sector Field Inductively Coupled Plasma Mass Spectrometry. The serum oxidant status (SOS) and anti-oxidant capacity (SAC) were also determined. Results showed a decreasing trend for Al in all the fluids of PD patients, with the strongest evidence in serum. Calcium levels in urine, serum and blood of PD patients were significantly higher than in controls. Copper and Mg concentrations were significantly lower in serum of PD patients. Levels of Fe in urine, blood and CSF of patients and controls were dissimilar, with an increase in the first two matrices and a decrease in CSF. No significant difference was found in levels of Mn between patients and controls. Urinary excretion of Si was significantly higher in PD subjects than in controls. No clear difference between Zn levels in the two groups was found for serum, urine or CSF, but an increase in Zn levels in the blood of PD patients was observed. The SOS level in PD was significantly higher while the corresponding SAC was found to be lower in patients than in controls, in line with the hypothesis that oxidative damage is a key factor in the pathogenesis of PD. The results on the whole indicate the involvement of Fe and Zn (increased concentration in blood) as well as of Cu (decreased serum level) in PD. The augmented levels of Ca and Mg in the fluids and of Si in urine of patients may suggest an involuntary intake of these elements during therapy.

High-throughput microwave-digestion procedures to monitor neurotoxic elements in body fluids by means of inductively coupled plasma mass spectrometry

Microwave (MW) digestion procedures with high sample throughput (simultaneous digestion of 36 or 80 samples) and procedural simplicity (disposable plastic tubes, or re-usable liners with screw-cap) were investigated for their efficiency in routine analyses of biological samples. Different digestion vessel materials were tested for metal leaching/adsorption and thermal resistance: quartz, glass, polyethylene (PE) and polystyrene (PS). For the instrumental quantification of Al, Bi, Cd, Co, Cr, Hg, Mn, Mo, Ni, Pb, Sb, and Tl at ultra-trace levels in urine, serum, and whole blood, sector field inductively coupled plasma mass spectrometry (SF-ICP-MS) was used. The different pretreatment conditions and vessels were evaluated in terms of contamination risk, effective power of detection, accuracy, and precision. Results of analyses of serum, urine and whole blood certified reference materials (CRMs) were fully satisfactory for almost all the analytes. In the case of Hg, Mo, and Tl in serum digested in plastic containers the results were just below the lower limit of uncertainty of the certified range. On the basis of the present data the following MW procedures can be suggested: 1. for urine, digestion with nitric acid at atmospheric pressure in plastic vials; 2. for serum, digestion with nitric acid at atmospheric pressure in glass vessels; and 3. for whole blood, digestion under pressure in quartz tubes. Because of the levels of the procedural blanks, Bi was not measurable at the concentrations expected in human fluids, and Al was accurately detectable in whole blood only.

Honey as a candidate reference material for trace elements

The feasibility of producing and certifying new certified reference materials (CRMs) for trace elements in honey was investigated. Preliminary steps for preparation of candidate materials are performed at the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM). Two different types of honey, Acacia and Eucalyptus, were tested for determination of 10 trace elements. To each type of honey was added a given amount of high purity deionized water to obtain aqueous solutions with an acceptable degree of homogeneity which would require only minimal manipulation before analysis. Average values obtained for the trace elements by means of inductively coupled plasma-based techniques were as follows (in microg/ kg +/- SD): Acacia honey, As, 1.10+/-0.20; Cd, 0.328+/-0.035; Cr, 1.90+/-0.22; Cu, 67.0+/-5; Fe, 215+/-30; Hg, < 0.75; Mn, 82.1+/-6.2; Ni, 21.0 3.0; Pb, 2.30+/-0.25; Se, 9.10+/-1.2; Zn, 167+/-22; Eucalyptus honey, As, 5.99+/-0.10; Cd, 0.592+/-0.074; Cr, 1.50+/-0.07; Cu, 219 24; Fe, 1008+/-114; Hg, <0.75; Mn, 1009+/-51; Ni, 11.3+/-1.5; Pb, 5.00+/-0.40; Se, 5.60+/-0.91; Zn, 791+/-91. When these 2 pilot materials are ready, the certification project will be launched in full compliance with current rules set by EC-JRC-IRMM. If the project is successful, the new CRMs will be put primarily at the disposal of the National Reference Laboratories for trace elements.