Functionalized MXene ink enables environmentally stable printed electronics

Establishing dependable, cost-effective electrical connections is vital for enhancing device performance and shrinking electronic circuits. MXenes, combining excellent electrical conductivity, high breakdown voltage, solution processability, and two-dimensional morphology, are promising candidates for contacts in microelectronics. However, their hydrophilic surfaces, which enable spontaneous environmental degradation and poor dispersion stability in organic solvents, have restricted certain electronic applications. Herein, electrohydrodynamic printing technique is used to fabricate fully solution-processed thin-film transistors with alkylated 3,4-dihydroxy-L-phenylalanine functionalized Ti3C2Tx (AD-MXene) as source, drain, and gate electrodes. The AD-MXene has excellent dispersion stability in ethanol, which is required for electrohydrodynamic printing, and maintains high electrical conductivity. It outperformed conventional vacuum-deposited Au and Al electrodes, providing thin-film transistors with good environmental stability due to its hydrophobicity. Further, thin-film transistors are integrated into logic gates and one-transistor-one-memory cells. This work, unveiling the ligand-functionalized MXenes' potential in printed electrical contacts, promotes environmentally robust MXene-based electronics (MXetronics).

Sustainable biofuel synthesis from non-edible oils: a mesoporous ZSM-5/Ni/Pt catalyst approach

This work examines the hydrodeoxygenation (HDO) activity of non-edible oils using a high surface area catalyst. The HDO activity was thoroughly examined and contrasted using the high surface area catalyst Ni/Pt-ZSM-5 as well as other supports like MCM-48 and H-beta. Ni/Pt bimetals supported on mesoporous ZSM-5 were created via reverse order impregnation to facilitate HDO of non-edible oils. Techniques such as XRD, FT-IR, BET, HR-TEM, HR-SEM, TPD, and TGA were used to characterize the produced catalysts. The synthesized catalysts considerably influenced the hydrodeoxygenation activities for the synthesis of lengthy chain hydrocarbons in a stainless-steel reactor with a high-pressure fixed bed between 300 and 375 °C under 10-40 bar hydrogen pressure. High levels of Ni/Pt-ZSM-5 acidity, textural, and H2 consumption qualities were discovered. Distributions of the products were also reviewed, along with comparisons of the structure-activity connections.

Extraction of Natural Pigment Curcumin from Curcuma Longa: Spectral, DFT, Third-order Nonlinear Optical and Optical Limiting Study

Herein, we report the extraction of natural pigment curcumin from curcuma longa and their linear and third-order nonlinear optical (NLO) characteristics. The characterization techniques viz., UV-Visible absorption, FT-IR, Micro Raman and Gas Chromatography Mass Spectrum (GC-MS) are used to study the spectral characteristics of curcumin. Third-order NLO features of curcumin are studied using Z‒scan technique with a semiconductor diode laser working at 405 nm wavelength. The natural pigment exhibits negative nonlinear index of refraction resulting from self-defocusing and positive coefficient of absorption is the consequence of reverse saturable absorption (RSA). The order of nonlinear index of refraction (n2) and nonlinear coefficient of absorption (β) is measured to be 10-7 cm2/W and 10-2 cm/W, respectively. Third-order NLO susceptibility (χ(3)) and second-order hyperpolarizability (γ) of curcumin is measured to be 2.73 × 10‒7 esu and 1.67 × 10‒31 esu, respectively. A low optical limiting (OL) threshold of 0.71 mW is observed in the extracted pigment. The experimental results are supplemented by quantum mechanical calculations of the NLO parameters. The overall result finding is that curcumin extracted from curcuma longa has the potential to be novel optical candidates for photonics and optoelectronics applications.

A Review on Interface Engineering of MXenes for Perovskite Solar Cells

With an excellent power conversion efficiency of 25.7%, closer to the Shockley-Queisser limit, perovskite solar cells (PSCs) have become a strong candidate for a next-generation energy harvester. However, the lack of stability and reliability in PSCs remained challenging for commercialization. Strategies, such as interfacial and structural engineering, have a more critical influence on enhanced performance. MXenes, two-dimensional materials, have emerged as promising materials in solar cell applications due to their metallic electrical conductivity, high carrier mobility, excellent optical transparency, wide tunable work function, and superior mechanical properties. Owing to different choices of transition elements and surface-terminating functional groups, MXenes possess the feature of tuning the work function, which is an essential metric for band energy alignment between the absorber layer and the charge transport layers for charge carrier extraction and collection in PSCs. Furthermore, adopting MXenes to their respective components helps reduce the interfacial recombination resistance and provides smooth charge transfer paths, leading to enhanced conductivity and operational stability of PSCs. This review paper aims to provide an overview of the applications of MXenes as components, classified according to their roles as additives (into the perovskite absorber layer, charge transport layers, and electrodes) and themselves alone or as interfacial layers, and their significant importance in PSCs in terms of device performance and stability. Lastly, we discuss the present research status and future directions toward its use in PSCs.

A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Photocatalytic water splitting, CO₂ reduction, and pollutant degradation have emerged as promising strategies to remedy the existing environmental and energy crises. However, grafting of expensive and less abundant noble-metal cocatalysts on photocatalyst materials is a mandatory practice to achieve enhanced photocatalytic performance owing to the ability of the cocatalysts to extract electrons efficiently from the photocatalyst and enable rapid/enhanced catalytic reaction. Hence, developing highly efficient, inexpensive, and noble-metal-free cocatalysts composed of earth-abundant elements is considered as a noteworthy step toward considering photocatalysis as a more economical strategy. Recently, MXenes (two-dimensional (2D) transition-metal carbides, nitrides, and carbonitrides) have shown huge potential as alternatives for noble-metal cocatalysts. MXenes have several excellent properties, including atomically thin 2D morphology, metallic electrical conductivity, hydrophilic surface, and high specific surface area. In addition, they exhibit Gibbs free energy of intermediate H atom adsorption as close to zero and less than that of a commercial Pt-based cocatalyst, a Fermi level position above the H₂ generation potential, and an excellent ability to capture and activate CO₂ molecules. Therefore, there is a growing interest in MXene-based photocatalyst materials for various photocatalytic events. In this review, we focus on the recent advances in the synthesis of MXenes with 2D and 0D morphologies, the stability of MXenes, and MXene-based photocatalysts for H₂ evolution, CO₂ reduction, and pollutant degradation. The existing challenges and the possible future directions to enhance the photocatalytic performance of MXene-based photocatalysts are also discussed.

Recent Advances in Quantum Dots for Photocatalytic CO2 Reduction: A Mini-Review

Solar energy–driven carbon dioxide (CO₂) reduction to valuable solar fuels/chemicals (e.g., methane, ethanol, and carbon monoxide) using particulate photocatalysts is regarded as one of the promising and effective approaches to deal with energy scarcity and global warming. The growth of nanotechnology plays an eminent role in improving CO₂ reduction (CO₂R) efficiencies by means of offering opportunities to tailor the morphology of photocatalysts at a nanoscale regime to achieve enhanced surface reactivity, solar light absorption, and charge separation, which are decisive factors for high CO₂R efficiency. Notably, quantum dots (QDs), tiny pieces of semiconductors with sizes below 20 nm, offering a myriad of advantages including maximum surface atoms, very short charge migration lengths, size-dependent energy band positions, multiple exciton generation effect, and unique optical properties, have recently become a rising star in the CO₂R application. In this review, we briefly summarized the progress so far achieved in QD-assisted CO₂ photoreduction, highlighting the advantages of QDs prepared with diverse chemical compositions such as metal oxides, metal chalcogenides, carbon, metal halide perovskites, and MXenes.

Modified PID like fuzzy servo control applied to smart actuator based miniature Parallel Robot

Miniature flexible parallel robots, popularly used for micro positioning application demands the use of non conventional actuators. Shape memory alloys (SMA) are popular smart actuators because of its light weight, integration compatibility, ease of actuation and high power density. Inclusion of shape memory alloy actuators to the parallel robot brings in control challenges due to its nonlinearity, coupling effects and cocontraction of antagonistic pair of actuators in the mechanism in order to achieve bi directional motion. In this paper, a PID like fuzzy controller is designed and applied to a nonlinear SMA spring actuator connected to a symmetric 2 DOF miniature parallel robot. The fuzzy rules are designed from the general response plot and modified to be applied to a parallel mechanism which involves cocontraction of antagonistic actuators. The paper has also presented the control and electrical circuit design used in the experimental set up. The fuzzy control is implemented in the hardware controller with model based position feedback and tested for the trajectory tracking characteristics of the end effector with disturbances. Experimental results are presented with quantitative analysis to show the effectiveness of the proposed controller in handling nonlinearities and disturbances compared to the conventional PID control and nonlinear Sliding mode control (NSMC). The test results has demonstrated the superior nature of proposed control over other controllers in the trajectory tracking with disturbances and also linearizing the hysteresis of controlled system.

Enhancing Light Absorption and Prolonging Charge Separation in Carbon Quantum Dots via Cl-Doping for Visible-Light-Driven Photocharge-Transfer Reactions

Limited light absorption beyond the UV region and rapid photocarrier recombination are critical impediments for the improved photocatalytic performance of carbon quantum dots (CQDs) under visible-light irradiation. Herein, we demonstrate single-step microwave-assisted syntheses of O-CQDs (typical CQDs terminated by carboxylic and hydroxyl functional groups) from a sucrose precursor and Cl-doped CQDs (Cl-CQDs) from a sucralose precursor in short reaction times and without using obligatory strong acids for Cl doping. The doping of Cl into the CQDs is observed to widen the absorption range and facilitate an enhanced separation of photoexcited charge carriers, which is confirmed by the results of optical absorption, photothermal response, and pump-probe ultrafast transient absorption spectroscopy measurements of the O-CQDs and Cl-CQDs. The photoexcited charge carriers with their longer lifetimes in Cl-CQDs enabled the quick degradation of methylene blue dye, rapid conversion of Ag⁺ ions to metallic Ag nanoparticles on the CQD surfaces, and reduction of GO to a well-dispersed rGO through the photoelectron transfer reactions under visible-light irradiation. The facile Cl doping strategy, hybridization of Ag nanoparticles or rGO to CQDs, and the elevated charge separation mechanism would open up new avenues in designing CQD-based materials for futuristic applications.

Evaluation of subgingival microbiota around single tooth implants

Objectives

1. To provide information about the subgingival microbiota around single tooth implants.2. To assess the subgingival microbial flora around the teeth adjacent to single tooth implants.3. To clinically evaluate the gingival health surrounding the single-tooth implants.

Methods

Patients undergoing the single-tooth implant replacements, were selected as subjects for the study. The natural teeth adjacent to implant sites were taken as control sites. Clinically each peri-implant gingival tissue health was evaluated. Subgingival plaque samples were removed with sterile curette and evaluated for microbial flora, by microscopic examinations. Bacterial cultures of samples studied. The similar procedure was followed for the control sites also. Finally the data collected were statistically analyzed and interpreted.

Results

The subgingival microbiota around single tooth implants was cultured and studied. Enterobacter species, Klebsiella pneumonia, Pseudomonas aeruginosa and Streptococcus species were predominantly found. Klebsiella pneumonia and Pseudomonas aeruginosa were found more frequently around implant sites than control sites. Anaerobic Bacteroides species were found in only one case around the implant site.

Conclusions

Prevention and control of bacterial infection in the peri-implant region are among the key factors in determining the long term success or failure of dental implant therapy. The thorough knowledge about the subgingival microbiota around the healthy and diseased peri-implant mucosa is needed to determine the overall outcome of implant therapy.

Enhancing the Charge Carrier Separation and Transport via Nitrogen-Doped Graphene Quantum Dot-TiO2 Nanoplate Hybrid Structure for an Efficient NO Gas Sensor

Herein, we demonstrate the ultraviolet (UV) light activated high-performance room-temperature NO gas sensor based on nitrogen-doped graphene quantum dots (NGQDs)-decorated TiO₂ hybrid structure. TiO₂ employed in the form of {001} facets exposed rectangular nanoplate morphology, which is highly reactive for the adsorption of active oxygen species. NGQD layers are grown on TiO₂ nanoplates by graphitization of precursors via hydrothermal treatment. The decoration of NGQDs on the TiO₂ surface dramatically enhanced the efficiency of gas and carriers exchange, charge carrier separation and transportation, and oxygen vacancies, which eventually improved the sensing performance. At room temperature, the TiO₂@NGQDs hybrid structure exhibited a response of 12.0% to 100 ppm NO, which is 4.8 times higher compared to that of pristine TiO₂ nanoplates. The response of TiO₂@NGQDs hybrid structure is further upgraded by employing the ultraviolet light illumination and manipulating the operating temperature. Under the UV (λ = 365 nm) illumination at room temperature, the hybrid structure response escalated to ∼31.1% for 100 ppm NO. On the other hand, the tailoring of working temperature yielded a response of ∼223% at an optimum operating temperature of 250 °C. The NO gas-sensing mechanism of TiO₂@NGQDs nanoplate's hybrid structure sensors under UV illumination and different working temperatures is discussed.

Molecular characterization of Orf virus isolates from Kodai hills, Tamil Nadu, India

Aim:

The present study was carried out to find out the causative agent of exanthematous skin lesions in sheep maintained by Southern Regional Research Centre, Mannavanur, Kodai hills, Tamil Nadu.

Materials and Methods:

Polymerase chain reaction (PCR) with Orf virus (ORFV) B2L gene-specific primers was carried out by employing the total genomic DNA isolated from the scabs as the template. The ORFV isolates from Kodai hills were characterized by the use of bioinformatics tools.

Results:

The amino acid identity of ORFV isolate 1 from Kodai hills is having 98.14%, 96.29%, and 83.59% identity with reference strains of ORFV, Pseudocowpox virus, and bovine papular stomatitis virus, respectively. Phylogenetic analysis revealed that ORFV isolates from Kodai hills clustered with the other ORFV isolates from different geographical areas of India.

Conclusion:

The etiological agent of exanthematous skin lesion among sheep of Kodai hills is ORFV.

Nanocube In2O3@RGO heterostructure based gas sensor for acetone and formaldehyde detection

Here, we demonstrated the formation of active sites O₂⁻ and O⁻ on the surface of nanocube In₂O₃@RGO heterostructure, gas sensing mechanisms and fluctuations in potential barrier height before and after insertion of acetone and formaldehyde.

Monodisperse, shape-selective synthesis of YF3:Yb3+/Er3+ nano/microcrystals and strong upconversion luminescence of hollow microcrystals

Synthesizing upconversion materials with 3-dimensional structures is of fundamental importance in understanding the relationship between their optical properties and their structures.

Reduced graphene oxide (RGO) enriched polymer network for highly-enhanced electro-optic performance of a liquid crystalline blue phase

A reduced graphene oxide enriched polymer network enhances the operation voltage, response time, and hysteresis of a liquid crystalline blue phase.

Genetic trend for growth and wool performance in a closed flock of Bharat Merino sheep at sub temperate region of Kodai hills, Tamil Nadu

Aim:

The study was conducted at Southern Regional Research Center, ICAR-Central Sheep and Wool Research Institute (CSWRI), Mannavanur, Kodaikanal, Tamil Nadu to estimate genetic trends for birth weight (BWT), weaning weight (3WT), 6 months weight (6WT), and greasy fleece weight (GFY) in a Bharat Merino (BM) flock, where selection was practiced for 6WT and GFY.

Materials and Methods:

The data for this study represents a total of 1652 BM lambs; progeny of 144 sires spread over 15 years starting from 2000 to 2014, obtained from the BM flock of ICAR-SRRC (CSWRI), Mannavanur, Kodaikanal, Tamil Nadu, India. The genetic trends were calculated by regression of average predicted breeding values using software WOMBAT for the traits BWT, 3WT, 6WT and GFY versus the animal’s birth year.

Results:

The least square means were 3.28±0.02 kg, 19.08±0.23 kg, 25.00±0.35 kg and 2.13±0.07 kg for BWT, 3WT, 6WT and GFY, respectively. Genetic trends were positive and highly significant (p<0.01) for BWT, while the values for 3WT, 6WT and GFY though positive, were not significant. The estimates of genetic trends in BWT, 3WT, 6WT and GFY were 5 g, 0.8 g, 7 g and 0.3 g/year gain and the fit of the regression shows 55%, 22%, 42% and 12% coefficient of determination with the regressed value, respectively. In this study, estimated mean predicted breeding value (kg) in BWT and 3WT, 6WT and GFY were 0.067, 0.008, 0.036 and −0.003, respectively.

Conclusion:

Estimates of genetic trends indicated that there was a positive genetic improvement in all studied traits and selection would be effective for the improvement of body weight traits and GFY of BM sheep.

SnO2 quantum dots decorated on RGO: a superior sensitive, selective and reproducible performance for a H2 and LPG sensor

We report the H2 and LPG gas sensing behavior of RGO/SnO2 QDs synthesized by a surfactant assisted hydrothermal method. The RGO/SnO2 QD based sensor shows a high response of ∼89.3% to H2 and ∼92.4% to LPG for 500 ppm test gas concentration at operating temperatures of 200 °C and 250 °C, respectively. Further, the RGO/SnO2 QD based sensor shows good selectivity for H2 and LPG in the presence of other interfering gases such as ammonia, chloroform, toluene, benzene, acetone, n-butylacetate, acetic acid and formic acid. We observed that the gas response to H2 is 29.8 times higher than that to acetic acid whereas the gas response to LPG is 17.8 times higher than that to formic acid. Long-term analyses have also been performed to demonstrate the reproducible nature of the RGO/SnO2 QD based sensor over passing time which shows excellent reproducibility.

Monitoring defects on monolayer graphene using nematic liquid crystals

Defects in graphene governs electrical and optical properties. Although grain boundaries in graphene inevitably formed during large area synthesis process, which act as scattering centers for charge carriers to degrade mobility, have been studied extensively, point defects have been rarely investigated mainly due to the absence of facile observation tools. Here, we report polarized optical microscopy to observe defect distributions in monolayer graphene. This was realized by aligning liquid crystal s (LC) on graphene where the defect population was modulated by irradiating ultraviolet (UV) light directly on graphene surface under moisture condition. Aromatic rings in LC molecules are oriented with hexagonal rings in graphene to have preferred orientation, providing a way to identify relative orientations of graphene domains and point defects. Our studies show that point defects generated by prolonged UV irradiation time give rise to irregular LC alignment with disclination lines on the graphene surface and a large-size LC domain associated with graphene single domain eventually disappeared. This indicates that defects associated with oxygen-containing functional groups cause to reduce the strong stacking interaction between graphene and LC molecules.

Differential effects of eicosapentaenoic acid and docosahexaenoic acid in promoting the differentiation of 3T3-L1 preadipocytes

The objective of this study was to determine the effects of enrichment with n-3 fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), on the differentiation of 3T3-L1 preadipocytes. Enrichment with DHA but not EPA significantly increased the differentiation markers compared to control differentiated cells. DHA compared to EPA treatment led to a greater increase in adiponectin secretion and, conditioned media collected from DHA treated cells inhibited monocyte migration. Moreover, DHA treatment resulted in inhibition of pro-inflammatory signaling pathways. DHA treated cells predominantly accumulated DHA in phospholipids whereas EPA treatment led to accumulation of both EPA and its elongation product docosapentaenoic acid (DPA), an n-3 fatty acid. Of note, adding DPA to DHA inhibited DHA-induced differentiation. The differential effects of EPA and DHA on preadipocyte differentiation may be due, in part, to differences in their intracellular modification which could impact the type of n-3 fatty acids incorporated into the cells.

Impact of hematopoietic cyclooxygenase-1 deficiency on obesity-linked adipose tissue inflammation and metabolic disorders in mice

OBJECTIVE

Adipose tissue (AT)-specific inflammation is considered to mediate the pathological consequences of obesity and macrophages are known to activate inflammatory pathways in obese AT. Because cyclooxygenases play a central role in regulating the inflammatory processes, we sought to determine the role of hematopoietic cyclooxygenase-1 (COX-1) in modulating AT inflammation in obesity.

MATERIALS/METHODS

Bone marrow transplantation was performed to delete COX-1 in hematopoietic cells. Briefly, female wild type (wt) mice were lethally irradiated and injected with bone marrow (BM) cells collected from wild type (COX-1+/+) or COX-1 knock-out (COX-1-/-) donor mice. The mice were fed a high fat diet for 16 weeks.

RESULTS

The mice that received COX-1-/- bone marrow (BM-COX-1-/-) exhibited a significant increase in fasting glucose, total cholesterol and triglycerides in the circulation compared to control (BM-COX-1+/+) mice. Markers of AT-inflammation were increased and were associated with increased leptin and decreased adiponectin in plasma. Hepatic inflammation was reduced with a concomitant reduction in TXB2 levels. The hepatic mRNA expression of genes involved in lipogenesis and lipid transport was increased while expression of genes involved in regulating hepatic glucose output was reduced in BM-COX-1-/- mice. Finally, renal inflammation and markers of renal glucose release were increased in BM-COX-1-/- mice.

CONCLUSION

Hematopoietic COX-1 deletion results in impairments in metabolic homeostasis which may be partly due to increased AT inflammation and dysregulated adipokine profile. An increase in renal glucose release and hepatic lipogenesis/lipid transport may also play a role, at least in part, in mediating hyperglycemia and dyslipidemia, respectively.

Fish oil and indomethacin in combination potently reduce dyslipidemia and hepatic steatosis in LDLR(-/-) mice

Fish oil (FO) is a potent anti-inflammatory and lipid-lowering agent. Because inflammation can modulate lipid metabolism and vice versa, we hypothesized that combining FO with cyclooxygenase inhibitors (COXIBs), well-known anti-inflammatory drugs, can enhance the anti-inflammatory and lipid-lowering effect of FO. LDLR(-/-) mice were fed a high-fat diet supplemented with 6% olive oil or FO for 12 wk in the presence or absence of indomethacin (Indo, 6 mg/l drinking water). FO reduced plasma total cholesterol by 30% but, in combination with Indo, exerted a greater decrease (44%). The reduction of liver cholesterol ester (CE) and triglycerides (TG) by FO (63% and 41%, respectively) was enhanced by Indo (80% in CE and 64% in TG). FO + Indo greatly increased the expression of genes modulating lipid metabolism and reduced the expression of inflammatory genes compared with control. The mRNA and/or protein expression of pregnane X receptor (PXR) and cytochrome P450 isoforms that alter inflammation and/or lipid metabolism are increased to a greater extent in mice that received FO + Indo. Moroever, the nuclear level of PXR is significantly increased in FO + Indo group. Combining FO with COXIBs may exert their beneficial effects on inflammation and lipid metabolism via PXR and cytochrome P450.

Effect of obstructive sleep apnea on mitral valve tenting

Obstructive apneas produce high negative intrathoracic pressure that imposes an afterload burden on the left ventricle. Such episodes might produce structural changes in the left ventricle over time. Doppler echocardiograms were obtained within 2 months of attended polysomnography. Patients were grouped according to apnea-hypopnea index (AHI): mild/no obstructive sleep apnea (OSA; AHI <15) and moderate/severe OSA (AHI ≥15). Mitral valve tenting height and area, left ventricular (LV) long and short axes, and LV end-diastolic volume were measured in addition to tissue Doppler parameters. Comparisons of measurements at baseline and follow-up between and within groups were obtained; correlations between absolute changes (Δ) in echocardiographic parameters were also performed. After a mean follow-up of 240 days mitral valve tenting height increased significantly (1.17 ± 0.12 to 1.28 ± 0.17 cm, p = 0.001) in moderate/severe OSA as did tenting area (2.30 ± 0.41 to 2.66 ± 0.60 cm(2), p = 0.0002); Δtenting height correlated with ΔLV end-diastolic volume (rho 0.43, p = 0.01) and Δtenting area (rho 0.35, p = 0.04). In patients with mild/no OSA there was no significant change in tenting height; there was a borderline significant increase in tenting area (2.20 ± 0.44 to 2.31 ± 0.43 cm(2), p = 0.05). Septal tissue Doppler early diastolic wave decreased (8.04 ± 2.49 to 7.10 ± 1.83 cm/s, p = 0.005) in subjects with moderate/severe OSA but not in in those with mild/no OSA. In conclusion, in patients with moderate/severe OSA, mitral valve tenting height and tenting area increase significantly over time. This appears to be related, at least in part, to changes in LV geometry.

Age-Associated Oxidative Macromolecular Damages in Rat Brain Regions: Role of Glutathione Monoester

The generation of reactive oxygen species (ROS) and resultant oxidative stress has been implicated in the mechanism of brain dysfunction due to age-related neurodegenerative diseases. We have evaluated the efficacy of glutathione monoester (GME) when administered intraperitoneally (12 mg/kg body weight) for 20 days on glutathione, ROS, superoxide anion production, lipid peroxidation (LPO), protein carbonyls, thiol status, oxidative DNA damage products such as 8-hydroxy deoxy guanosine and DNA protein cross-links in discrete brain regions of young and aged rats. An age associated increase in ROS, superoxide anion production, LPO, protein oxidation, and DNA damage products in cortex, striatum, and hippocampus was observed which was reversed by GME. Contradictorily, a decline in the levels of glutathione, total thiol, and nonprotein and protein thiols was observed which was also reversed upon GME administration. These findings suggest that GME administration inhibits free radical-induced oxidative macromolecular damage in aged rats and thereby protects the brain from ROS.

Modulatory role of grape seed extract on age-related oxidative DNA damage in central nervous system of rats

Aging is the accumulation of diverse deleterious changes in the cells and tissues leading to increased risk of diseases. Oxidative stress is considered as a major risk factor and contributes to age related increase in DNA oxidation and DNA protein cross-links in central nervous system during aging. In the present study, we have evaluated the salubrious role of grape seed extract on accumulation of oxidative DNA damage products such as 8-OHdG and DNA protein cross-links in aged rats. Male albino rats of Wistar strain were divided into four groups: Group I, young control rats; Group II, young rats treated with grape seed extract (100 mg/kg b.wt.) for 30 days; Group III, aged control rats; Group IV, aged rats supplemented with grape seed extract (100 mg/kg b.wt.) for 30 days. Our results, thus, revealed that grape seed extract has inhibiting effect on the accumulation of age-related oxidative DNA damages in spinal cord and in various brain regions such as cerebral cortex, striatum and hippocampus.

Age‐related oxidative protein damages in central nervous system of rats: modulatory role of grape seed extract

Oxidative stress has been shown to play a major role in aging and in neurodegenerative disorders. Protein modification is one of the important consequences of oxidative stress. In the present study, we evaluated the role of grape seed extract on memory, reactive oxygen species production, protein carbonyls (PCO), and thiol status in discrete regions of central nervous system of young and aged rats. Male albino rats of Wistar strain were divided into four groups: Group I--control young rats, Group II--young rats treated with grape seed extract (100 mg/kg BW) for 30 days, Group III--aged control rats and Group IV-aged rats supplemented with grape seed extract (100 mg/kg BW) for 30 days. Memory loss was observed in the aged rats. Age associated increase in reactive oxygen species production and protein oxidation was observed in the spinal cord; cerebral cortex, striatum and the hippocampus regions of aged rats (Group III). The levels of total thiol, non-protein thiol, protein thiols were found to be significantly decreased in spinal cord and all the brain regions studied in aged rats when compared to young rats. Supplementation of aged rats with grape seed extract showed increased memory performance and declined reactive oxygen species production, decreased protein carbonyl levels and improved thiol levels. These findings demonstrated that grape seed extract enhanced the antioxidant status and decreased the incidence of free radical induced protein oxidation in aged rats thereby protecting the central nervous system from the reactive oxygen species.

Airway Compromise Due to Angiotensin-Converting Enzyme Inhibitor-Induced Angioedema

STUDY OBJECTIVE

To evaluate the incidence of airway compromise, clinical presentation and morbidity of angiotensin-converting enzyme inhibitor (ACEI)-related angioedema (AE).

METHOD

A retrospective chart review was conducted of all patients admitted to our hospital between 1996 and 2001 with the diagnosis of AE.

RESULTS

A total of 70 charts on which a diagnosis of AE had been entered were reviewed. Of those, 45 patients (64%) had AE that was thought to be related to ACEI therapy. Of those 45 patients, 29 were women. The mean age was 62 years, and 41 (91%) were African-American. The duration of ACEI therapy before presentation varied from 1 day to 5 years postingestion. Twenty-one of 32 patients presented within 2 months of the initiation of therapy. The mean duration between the onset of symptoms and presentation to the hospital was 9 h. Lip and tongue swelling was seen in all patients. Pulmonary manifestations were noted in 17 of 45 patients (38%) [dyspnea 17 of 17 patients; stridor/respiratory failure, 5 of 17 patients; cough, 2 of 17 patients]. Dysphagia was noted in 9 of 45 patients, drooling of saliva in 8 of 45 patients, and pruritus in 6 of 45 patients. Ten of 45 patients had a history of AE. In five of those patients (50%), ACEI use was a presumed cause of the AE for the current hospital admission. Eighteen of 45 (40%) patients required ICU admission. The mean ICU length of stay was 2.2 days. Five of 45 patients required endotracheal intubation. The mean time spent receiving ventilation was 2.2 days. Discontinuation of the initiating agent and supportive care were the keys to therapy. All of our patients responded to supportive management, and there was no mortality.

CONCLUSION

Sixty-four percent of patients in this series had AE due to receiving an ACEI. The majority of the patients were African-American women. Most patients presented within 2 months of starting to receive the drug, although longer durations of therapy were not uncommon. Lip and tongue swelling was the most common airway manifestation. Based on our observations, the discontinuation of ACEI therapy and supportive management are the recommended approaches to therapy to prevent an untoward outcome.