Exploring the Benefits of 3D-Printed Bolus in Cone Beam CT for Modified Radical Mastectomy Breast Cancer

PURPOSE/OBJECTIVE(S)

To improve the accuracy of superficial dose coverage for patients undergoing modified radical mastectomy (MRM), boluses are frequently applied to the skin surface of targeted region during radiotherapy. The irregular curvature of MRM breast cases results in discrepancies of dosimetry and poor contact. Additionally, the presence of an air gap causes unnecessary high-dose escalation and uncertainty in dose calculation, making the use of commercial flat bolus problematic. This study evaluated the effectiveness of 3D-printed bolus by comparing it to commercial bolus in setup variations and dosimetric compliance through daily cone-beam computed tomography (CBCT) scans.

MATERIALS/METHODS

Ten patients underwent MRM were divided into 2 groups. 5 patients treated with 0.5 cm commercial bolus as group A while the other 5 patients covered by 3D Bolus as group B. 3D bolus was made of polylactic acid filament (PLA) and contoured in advance with thickness of 0.5 cm on the surface of target. Positional errors were recorded through daily image guidance and compared with the images. Both groups had right-sided breast with neck lymph nodes involved and received 50 Gy in 25 fractions using 4 partial arcs of the volumetric modulated arc therapy (VMAT) technique. The CBCTs were recalculated through treatment planning system (TPS) to assess superficial dose coverage. A two-tailed student's t-test was applied.

RESULTS

Groups A and B pitch angles were -0.203 ± 0.837° and 0.334 ± 0.909° (p = 0.0003). Roll angle were 0.313 ± 0.728° and -0.633 ± 1.286° (p = 0.0000013). Yaw angle were -0.034 ± 0.872° and 0.018 ± 0.883° (p = 0.721). There was a trend of differences in the Z-axis and significant statistical differences in the pitch and roll angles due to aligning gel layers directly with group A's body surface, while 3D bolus rigidly adherence to group B's delineated curve. In the planned target volume (PTV), the CI and HI of group A were 0.9448±0.0208 and 1.2061±0.0448, respectively, while 0.9776±0.0144 and 1.1472±0.0206 (p<0.005) were for group B. As for the superficial region, which is defined from body surface to 0.5cm inside PTV, CI and HI of A were 0.8290±0.0599 and 1.4675±0.2434, while for B, they were 0.9753±0.0214 and 1.1330±0.0126, respectively (p<0.005).

CONCLUSION

The study analyzed the results through image comparison and investigated the CI and HI between two types of boluses. The 3D bolus reduces setup errors and improves dose coverage especially when superficial region is concerned. Better consistency of patient repositioning and dosimetry can be achieved and proved by daily assessment of CBCT scan. The customization of 3D bolus with integration of TPS and CT scans provides a solution to the inadequacies of commercial bolus. The results suggest that the use of 3D bolus is a promising development in radiation therapy for MRM breast cancer patients.

Left ventricular apical aneurysm in Fabry disease: implications for clinical significance and risk stratification

Funding Acknowledgements

Type of funding sources: None.

Background

More than 50% of patients with Fabry disease (FD) present with cardiac phenotype, and left ventricular hypertrophy (LVH) is the most frequent manifestation. Among FD patients with LVH, a rare and novel presentation of left ventricular apical aneurysm (LVAA) has been reported.

Purpose

This study aimed to investigate the clinical incidence of LVAA and its impacts on prognosis among FD patients.

Methods

We retrospectively analyzed 268 FD patients at a tertiary medical center between January 2003 to September 2020. Two patients with ischemic LVAA were excluded. LVH and LVAA were confirmed either by echocardiography (Figure 1A) or cardiovascular magnetic resonance imaging (Figure 1B). The primary endpoints were a composite of heart failure (HF) hospitalization, sustained ventricular tachycardia (VT), stroke, and death. 

Results

Of 266 FD patients, there were 105 (39.5%) patients had LVH, and 11 (10.3%) of them had LVAAs (age 67.5 ± 9.5 years, 8 males [72.7%]). After a mean follow-up of 49.3 ± 34.8 months, 8 patients experienced primary endpoints, including 5 (45.5%) HF hospitalizations, 3 (27.3%) VT, 1 (9.1%) stroke, and 4 (36.4%) deaths. The risk for composite adverse events was significantly higher in patients with LVAA compared with those without (8 [72.7%] vs 17 [18.1%]), leading to significantly lower event-free survival in patients with LVAA (Log-Rank P &lt; 0.001, Figure 2). The presence of LVAA was independently associated with an increased risk of composite adverse events (hazard ratio: 3.59; confidence interval: 1.30-9.91, P = 0.01) after adjusting for age, gender, advanced HF, renal function, dyslipidemia, atrial fibrillation, left ventricular ejection fraction of &lt;40%, average E/e’, and LV mass index.

Conclusions

LVAA presents in around 10% of patients with Fabry cardiomyopathy and is strongly associated with an increased risk of adverse events. The identification of this phenotype would be useful to identify high-risk patients with Fabry cardiomyopathy, among whom more aggressive treatments may be considered. Abstract Figure. Apical aneurysm in Fabry cardiomyopathy  Abstract Figure. KM curve of composite adverse events

Pulmonary pressure-to-longitudinal strain ratio by echocardiography: a rapid surrogate to magnetic resonance for right ventricular failure assessment

Funding Acknowledgements

Type of funding sources: Public hospital(s). Main funding source(s): United Christian Hospital Ruttonjee and Tang Siu Kin Hospitals

Background

Better risk stratification in pulmonary hypertension (PH) by echocardiography (echo) to detect ventricular vascular uncoupling may act as gate-keeper for downstream management, such as MRI and expensive therapies. Studies showed modest correlation found between RV peak global longitudinal strain (RVGLS), which is afterload dependent, and right ventricular ejection fraction (RVEF)

Purpose

To test the accuracy and optimal cut-off of echo derived mean PA pressure-to-RVGLS ratio against MRI detected severe RV dysfunction (defined as RVEF&lt; 35%), RV dilatation (defined as RVEDVi &gt;87ml), and correlate native T1-values (nT1)

Method

Strain analyses by echo and volumetric assessment by 1.5 tesla MRI were performed in all patients. Contoured MRI short axis images provided RVEF. In a subgroup of pulmonary arterial hypertension (PAH), right heart catheterization and MRI non-contrast native T1 mapping were performed (Figure 1). Using previous study data, to identify a difference of 1.8 pressure-to-strain ratio between mild and severe PH with a variance  of 2.2 , power of 80% and a significance level of 0.05, a total of 11 participants per group were needed

Result

Thirty-one PH patients (13 female, age 60 ± 14y, 13 had PAH) were recruited prospectively. Strong correlation was demonstrated between the mean PA pressure-to-RVGLS ratio to MRI derived RVEF (r = 0.80, p &lt; 0.01), and to catheterization derived pulmonary vascular resistance and indexed cardiac output (r = -0.80, p= 0.001; r= -0.75, p = 0.003 respectively). The cut-off value of -2.5 had best accuracy in ROC analyses (Table 1)

In PAH patients, this ratio correlated with global nT1 at basal short-axis level (r= -0.91, p = 0.004), but not at the mid short-axis level. Their basal posterior interventricular insertion regions had significantly higher nT1 than those of age-matched normal controls at the same region on the same scanner (1256 ± 217 ms vs. 932 ± 25 ms, p = 0.04)

Conclusion

In terms of detection of severe right ventricular dysfunction by echocardiography, mean PA pressure-to-RVGLS ratio performed better than RVGLS alone, and a ratio cutoff of -2.5 predicts MRI determined ventricular vascular uncoupling in pulmonary hypertension

Table 1 Echo detect MRI AUC standard error 95% CI sens (%) spec (%) p Mean PA pressure -to-RVGLS ratio RVEF &lt; 35% 0.86 0.073 0.71-1.00 72 83 0.007 RVEDVi &gt; 87ml 0.81 0.081 0.65-0.97 83 70 0.004 RVGLS RVEF &lt; 35% 0.76 0.100 0.57-0.96 60 83 0.048 RVEDVi &gt; 87ml 0.73 0.090 0.55-0.91 67 70 0.032 PA pulmonary artery; RVGLS: RV global longitudinal strain; RVEDVi: indexed RV end-diastolic volume Abstract Figure 1

Multi-objective optimization of peel and shear strengths in ultrasonic metal welding using machine learning-based response surface methodology

Ultrasonic metal welding (UMW) is a solid-state joining technique with varied industrial applications. Despite of its numerous advantages, UMW has a relative narrow operating window and is sensitive to variations in process conditions. As such, it is imperative to quantitatively characterize the influence of welding parameters on the resulting joint quality. The quantification model can be subsequently used to optimize the parameters. Conventional response surface methodology (RSM) usually employs linear or polynomial models, which may not be able to capture the intricate, nonlin-ear input-output relationships in UMW. Furthermore, some UMW applications call for simultaneous optimization of multiple quality indices such as peel strength, shear strength, electrical conductivity, and thermal conductivity. To address these challenges, this paper develops a machine learning (ML)- based RSM to model the input-output relationships in UMW and jointly optimize two quality indices, namely, peel and shear strengths. The performance of various ML methods including spline regression, Gaussian process regression (GPR), support vector regression (SVR), and conventional polynomial re-gression models with different orders is compared. A case study using experimental data shows that GPR with radial basis function (RBF) kernel and SVR with RBF kernel achieve the best prediction accuracy. The obtained response surface models are then used to optimize a compound joint strength indicator that is defined as the average of normalized shear and peel strengths. In addition, the case study reveals different patterns in the response surfaces of shear and peel strengths, which has not been systematically studied in the literature. While developed for the UMW application, the method can be extended to other manufacturing processes.

Extreme Antiscaling Performance of Slippery Omniphobic Covalently Attached Liquids

Scale formation presents an enormous cost to the global economy. Classical nucleation theory dictates that to reduce the heterogeneous nucleation of scale, the surface should have low surface energy and be as smooth as possible. Past approaches have focused on lowering surface energy via the use of hydrophobic coatings and have created atomically smooth interfaces to eliminate nucleation sites, or both, via the infusion of low-surface-energy lubricants into rough superhydrophobic substrates. Although lubricant-based surfaces are promising candidates for antiscaling, lubricant drainage inhibits their utilization. Here, we develop methodologies to deposit slippery omniphobic covalently attached liquids (SOCAL) on arbitrary substrates. Similar to lubricant-based surfaces, SOCAL has ultralow roughness and surface energy, enabling low nucleation rates and eliminating the need to replenish the lubricant. To enable SOCAL coating on metals, we investigated the surface chemistry required to ensure high-quality functionalization as measured by ultralow contact angle hysteresis (<3°). Using a multilayer deposition approach, we first electrophoretically deposit (EPD) silicon dioxide (SiO₂) as an intermediate layer between the metallic substrate and SOCAL. The necessity of EPD SiO₂ is to smooth (<10 nm roughness) as well as to enable the proper surface chemistry for SOCAL bonding. To characterize antiscaling performance, we utilized calcium sulfate (CaSO₄) scale tests, showing a 20× reduction in scale deposition rate than untreated metallic substrates. Descaling tests revealed that SOCAL dramatically decreases scale adhesion, resulting in rapid removal of scale buildup. Our work not only demonstrates a robust methodology for depositing antiscaling SOCAL coatings on metals but also develops design guidelines for the creation of antifouling coatings for alternate applications such as biofouling and high-temperature coking.

P923Feasibility of the transcatheter mitral valve repair as the rescue therapy for patients with severe mitral regurgitation and endangered heart failure

Background

For those who carry high or prohibitive surgical risk, the transcatheter edge-to edge mitral valve repair using MitraClip has been a safe and effective treatment for severe mitral regurgitation (MR). In patients with severe MR and cardiogenic shock under hemodynamic supporting devices, emergent surgical mitral valve interventions carry extremely high risk for peri-operative morbidities and mortalities. The feasibility and efficacy of emergent MitraClip to rescue patients in critical conditions remains elucidate.

Methods

Patients with severe MR were evaluated by the heart team and those with high or prohibitive surgical risks were referred to receive MitraClip procedures. Emergent MitraClip were conducted in patients with unstable hemodynamics and under mechanical or inotropic support. The hemodynamic measures, transthoracic echocardiography, transesophageal echocardiography, and blood tests were performed before MitraClip procedures. Procedural success was defined as having mild mitral regurgitation immediately after MitraClip, and patients were free from in-hospital mortality. Clinical and echocardiographic outcomes were followed by telephones and clinics.

Results

Among 50 consecutive patients (74.7±11.2 years, 74% male), 8 emergent MitraClip procedures were conducted to rescue patients with cardiogenic shock. Extracorporeal membrane oxygenation were used in 2 patients and intra-aortic balloon pump were applied in 4 patients (50%). The rest of 4 patients received continuous inotropic agent administration. Compare to those who underwent elective procedures, patients underwent emergent MitraClip had higher surgical risk profile (Euroscore II 34.8% vs 5.1% and STS score 19.7% vs 5.1%), poorer renal function and higher right atrial pressure. There was no peri-procedural death, myocardial infarction, stroke or any adverse events requiring emergent cardiac surgery in both groups. Mild mitral regurgitation was achieved in 87.5% patients from the emergent group and 95.2% patients in the elective group (P=0.514). In follow up, there were 5 deaths (three in the emergent group), including 2 non-cardiovascular deaths. The Kaplan-Meier analysis showed patients who underwent emergent procedures have poorer long-term survival rate as compare to those who received elective procedures. (P value = 0.008).

Conclusions

When open-heart surgery is not feasible and deferred due to excessive risk, trans-catheter mitral valve repair is an alternative way to rescue patients in cardiogenic shock status. The emergent MitraClip procedure may provide comparable safety and efficacy in treating patients with severe MR and unstable hemodynamics.

Fluid Restriction for Treatment of “Fluid Creep” after Acute Burn Resuscitation

Objective

Fluid creep in patients recovering from acute burns still exists, despite the use of a more treatment conservative approach. Most of our severe burn patients develop fluid overload and body weight increase after acute fluid resuscitation. How to quickly return patients to their pre-injury body weight is an important issue.

Methods

Right after acute fluid resuscitation, we applied a “total fluid requirement” volume (usually 1/2 to 2/3 of initial 24 hour volume) and strictly monitored patients' hourly urine (between 0.5-1 ml/kg/hr). Patients' responses (body weight, enteric feeding amount, pulmonary condition, etc.) were also closely monitored and frequent adjustments of fluid volume administration were performed simultaneously.

Results

Most patients regained their pre-injury body weight within 2-3 weeks. Enteric feeding also improved markedly. No patients had severe oedema-related complications.

Conclusions

Stricter fluid administration after acute burn fluid resuscitation is advised for allowing patients to reduce body weight to their pre-injury weight or at least close to it. We use pre-injury body weight, enteric feeding and urine output as our guides. (Hong Kong j.emerg.med. 2014;21:222-229)

Paddle Position and Contact Force: An Important Step to Check When Troubleshooting for Refractory Ventricular Fibrillation

Ventricular fibrillation (VF) is a lethal medical emergency that requires immediate defibrillation. VF is resistant when it persists after three or more defibrillator shocks. Successful defibrillation requires depolarisation of a critical mass of myocardium. Several variables, such as the length of time in VF, body type, total energy used, and energy waveform have been reported to be associated with the success rate of defibrillation. Correct paddle position and good contact force to create an adequate current flow through the heart is essential for defibrillation. We report a patient who developed VF because of acute myocardial infarction that was resistant to a total of 13 shocks. The cause of shock-resistant VF was diagnosed by noticing the skin marks caused by the defibrillator paddle that indicated incorrect paddle position and inadequate paddle force. By checking the skin marks, an emergency physician could make a correct diagnosis within a few seconds and save a patient.

Photon bunching in cathodoluminescence

We have measured the second order correlation function [g^{(2)}(τ)] of the cathodoluminescence intensity resulting from the excitation by fast electrons of defect centers in wide band-gap semiconductor nanocrystals of diamond and hexagonal boron nitride. We show that the cathodoluminescence second order correlation function g^{(2)}(τ) of multiple defect centers is dominated by a large, nanosecond zero-delay bunching (g^{(2)}(0)>30), in stark contrast to their flat photoluminescence g^{(2)}(τ) function. We have developed a model showing that this bunching can be attributed to the synchronized emission from several defect centers excited by the same electron through the deexcitation of a bulk plasmon into few electron-hole pairs.

Ambient pressure structural quantum critical point in the phase diagram of (Ca(x)Sr(1-x))(3)Rh(4)Sn(13)

The quasiskutterudite superconductor Sr_{3}Rh_{4}Sn_{13} features a pronounced anomaly in electrical resistivity at T^{*}∼138  K. We show that the anomaly is caused by a second-order structural transition, which can be tuned to 0 K by applying physical pressure and chemical pressure via the substitution of Ca for Sr. A broad superconducting dome is centered around the structural quantum critical point. Detailed analysis of the tuning parameter dependence of T^{*} as well as insights from lattice dynamics calculations strongly support the existence of a structural quantum critical point at ambient pressure when the fraction of Ca is 0.9 (i.e., x_{c}=0.9). This establishes the (Ca_{x}Sr_{1-x})_{3}Rh_{4}Sn_{13} series as an important system for exploring the physics of structural quantum criticality without the need of applying high pressures.

A systematic review on the use of daily subcutaneous administration of teriparatide for treatment of patients with osteoporosis at high risk for fracture in Asia

This systematic review aimed to examine the evidence for teriparatide in Asia for osteoporosis with a high fracture risk and for exploratory (unapproved) bone-related indications. MEDLINE (1946+), EMBASE (1966+), and ClinicalTrials.gov (2008+) were searched (16 August 2013); all studies of daily subcutaneous teriparatide 20 μg for bone-related conditions from China, Hong Kong, Japan, Republic of Korea, Philippines, Singapore, and Taiwan were included. Evidence on efficacy/safety was retrieved primarily from randomized controlled trials (10 publications) of postmenopausal women from Japan and China. In these studies, teriparatide was well tolerated; subjects had significantly greater increases in lumbar spine bone mineral density (BMD) from baseline compared with placebo, antiresorptive agents, or elcatonin/calcitonin; bone turnover markers increased from baseline and were sustained at elevated levels during teriparatide treatment. Few studies reported fracture risk, pain, or quality of life; one study showed a lower incidence of new-onset vertebral fracture with teriparatide versus antiresorptive agents. Nonrandomized studies (nine publications, one unpublished trial) conducted mainly in Taiwan, Japan, and the Republic of Korea provided supporting data for efficacy. The exploratory (unapproved) use of teriparatide (17 publications) for fracture healing and osteonecrosis of the jaw was described primarily in case reports. The clinical effectiveness of teriparatide for treatment of postmenopausal women with osteoporosis who are at high risk of fracture in Asia is focused primarily on improvements in BMD and tolerability. Recommended additional studies may include assessment of fracture risk and the effect of teriparatide on pain, quality of life, and mortality in Asia.

Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications

The capability of 3D printing technologies for direct production of complex 3D structures in a single step has recently attracted an ever increasing interest within the field of microfluidics. Recently, ultrafast lasers have also allowed developing new methods for production of internal microfluidic channels within the bulk of glass and polymer materials by direct internal 3D laser writing. This review critically summarizes the latest advances in the production of microfluidic 3D structures by using 3D printing technologies and direct internal 3D laser writing fabrication methods. Current applications of these rapid prototyped microfluidic platforms in biology will be also discussed. These include imaging of cells and living organisms, electrochemical detection of viruses and neurotransmitters, and studies in drug transport and induced-release of adenosine triphosphate from erythrocytes.

Detection of a few metallo-protein molecules using color centers in nanodiamonds

Nanometer-sized diamonds containing nitrogen-vacancy defect centers (NV) are promising nanosensors in biological environments due to their biocompatibility, bright fluorescence, and high magnetic sensitivity at ambient conditions. Here we report on the detection of ferritin molecules using magnetic noise induced by the inner paramagnetic iron as a contrast mechanism. We observe a significant reduction of both coherence and relaxation time due to the presence of ferritin on the surface of nanodiamonds. Our theoretical model is in excellent agreement with the experimental data and establishes this method as a novel sensing technology for proteins.

Isradipine prevents rotenone-induced intracellular calcium rise that accelerates senescence in human neuroblastoma SH-SY5Y cells

Previous research demonstrated that rotenone (RT) induces neuronal injury partially by increasing intracellular Ca(2+) concentrations ([Ca(2+)]i), and inducing oxidative stress, leading to a neurodegenerative disorder. However, the mechanism of RT-induced injury remains elusive. Recent work revealed that Ca(2+) signaling is important for RT-induced senescence in human neuroblastoma SH-SY5Y cells. In the present study, we found that in SH-SY5Y cells, RT increased [Ca(2+)]i, senescence associated β-galactosidase activity, aggregation of lipofuscin, production of reactive oxygen species, G1/G0 cell cycle arrest, and activation of p53/p21 signaling proteins. In addition, RT decreased the expression of the signaling proteins for cell proliferation and survival, Cyclin-dependent kinase 2 (CDK2), cyclin D1, and Akt. Pretreatment of SH-SY5Y cells with isradipine, an L-type Ca(2+) channel blocker, or EGTA antagonized these effects of RT. These results suggested that application of isradipine might be a novel approach to prevent RT-induced neurodegenerative disorder such as Parkinson's disease.

Adverse postoperative outcomes in surgical patients with immune thrombocytopenia

Background

Patients with immune thrombocytopenia (ITP) are likely to have various medical co-morbidities, yet their global features regarding adverse postoperative outcomes and use of medical resources when undergoing major surgery are unknown. The objective of this study was to validate whether ITP is an independent risk factor for adverse postoperative outcomes, and to explore the potential clinical predictors of outcomes after major surgery among patients with ITP.

Methods

A retrospective population-based cohort study was conducted using Taiwan's National Health Insurance Research Database, controlling for preoperative co-morbidities by means of multiple logistic regression. Major postoperative complication and mortality rates, and in-hospital medical costs were analysed.

Results

The study included 11 085 surgical patients with ITP and 44 340 controls without ITP matched for sex, age, and type of surgery and anaesthesia. Surgical patients with ITP had a higher risk of postoperative death (odds ratio (OR) 1·89, 95 per cent confidence interval 1·57 to 2·27), and overall postoperative complications (OR 1·47, 1·39 to 1·56), and increased hospital stay (OR 1·90, 1·80 to 2·01), admission to the intensive care unit (OR 1·73, 1·63 to 1·83) and medical costs (OR 1·89, 1·79 to 1·99). Amount of preoperative platelet and/or red blood cell transfusion, emergency visits and admission to hospital for ITP care were identified as risk factors for adverse postoperative outcomes.

Conclusion

Patients with ITP undergoing surgery are at increased risk of adverse perioperative events, particularly if blood or blood product transfusion are required preoperatively, or the procedure is done as an emergency.

Susceptibility-weighted imaging in patients with pyogenic brain abscesses at 1.5T: characteristics of the abscess capsule

BACKGROUND AND PURPOSE

SWI is a high-resolution 3D, fully velocity-compensated gradient-echo sequence that uses both magnitude and phase data. The purpose of this study was to investigate the phase behavior of the capsule of pyogenic brain abscesses with noncontrast SWI.

MATERIALS AND METHODS

Fourteen patients with pyogenic brain abscesses were studied at 1.5T. In all of the patients, SWI images were obtained and reviewed in addition to conventional MR images. Phase values within the abscess capsule were measured and compared with those from the abscess cavities and contralateral normal white matter using 1-way repeated measures ANOVA with post hoc Bonferroni analysis.

RESULTS

SWI phase images showed mild hypointesity in 6 patients, isointensity in 3 patients, and mixed iso- to mild hypointensity in 5 patients. The means of phase in the cavity, rim of abscesses, and contralateral normal white matter were -7.552 × 10(-3) ± 0.024, -0.105 ± 0.080, and +0.029 ± 0.011 radians, respectively. Post hoc comparisons showed significant differences between any pair of the 3 regions (abscess cavity, rim capsule, and normal white matter) in SWI (all Ps < .005).

CONCLUSIONS

SWI phase imaging shows evidence of paramagnetic substances in agreement with the presence of free radicals from phagocytosis. SWI may provide additional information valuable in the characterization of pyogenic brain abscesses.

Purification and characterization of antifungal δ-dodecalactone from Lactobacillus plantarum AF1 isolated from kimchi

The aim of this study was to purify and identify an antifungal compound from Lactobacillus plantarum AF1, which was isolated from kimchi. The antifungal compound was purified by solid-phase extraction and recycling preparative high-performance liquid chromatography, and its structure was elucidated by using gas chromatography-mass spectrometry (GC-MS). The active compound from L. plantarum AF1 was confirmed to be δ-dodecalactone (molecular weight, 198.3) by comparison of its gas chromatographic retention time with the mass spectrum of standard δ-dodecalactone. The MICs of δ-dodecalactone against various fungi and bacteria ranged from 350 to 6,250 m g/ml. δ-Dodecalactone showed strong antifungal activity against molds Aspergillus flavus, A. fumigatus, A. petrakii, A. ochraceus, A. nidulans, and Penicillium roqueforti. The three tested yeast strains of Candida albicans were more resistant than the molds. Antibacterial activity was evident but less potent than the antifungal activity. δ-Dodecalactone produced pleasurable (fruity) organoleptic characteristics. The results indicate the potential of the δ-dodecalactone produced by L. plantarum AF1 as a biopreservative and flavoring compound, as well as a biosafe remedy for candidiasis.

Capsaicin may induce breast cancer cell death through apoptosis-inducing factor involving mitochondrial dysfunction

The majority of breast cancer patients are resistant to chemotherapy or radiotherapy due to the down-regulation or lack of caspase-3 expression. Capsaicin was found to inhibit cancer cell growth in caspase-3-deficient human breast cancer cells. This study aimed to investigate the growth-inhibitive effect of capsaicin and its mechanisms in human breast cancer cell lines, MCF-7 and BT-20. The results showed that cell viability decreased in a dose-dependent manner in both the caspase-3-deficient and non-deficient cells through inducing cell apoptosis and arresting the cell cycle in the S phase. Capsaicin significantly decreased mitochondria membrane potential, induced the cleavage of PARP-1, and decreased procaspase-7 expression in both cells. Apoptosis-inducing factor (AIF) was distinctly released from mitochondria and translocated into the cytoplasm and nucleus in MCF-7 cells (52.9%), but not in BT-20 cells (2%) after treatment with 200 μM of capsaicin for 24 hours. Capsaicin inhibited breast cancer cell growth through inducing cell apoptosis and cell cycle arrest in the S phase. This apoptotic effect could be induced through the mitochondrial pathway, and PARP-1 subsequently cleaved by activation of caspase-7. The application of capsaicin in clinical therapy could be useful for breast cancer patients.

Forensic Science in Support of Wildlife Conservation Efforts - Developments in Morphological and Chemical Approaches in Taiwan

Parts from animals that are now endangered species (such as bear bile, rhino horn, and tiger bone) have long been important ingredients of traditional Chinese medicine (TCM). Deeply believing in the potency of these ingredients and coupled with substantial gains in wealth of the population in Taiwan in the 1980s, ugly scenarios came to light. Taiwan quickly became the target of investigation pursued by international wildlife conservationists. To provide scientific bases for the government's investigation efforts, morphological, chemical/physical, and genetic methods were developed to characterize TCM products. This review focuses on Taiwanese scientists' efforts on the following topic matters: (a) morphological approach to identify CITES-listed species from the turtle shells traded in the TCM market; (b) chromatographic and spectrophotometric methods for the identification and differentiation of bile products of different animal origins; and (c) gas chromatography-mass spectrometry method for the analysis of deer musk components and alleged musk products.

Determination of microbial diversity in meju, fermented cooked soya beans, using nested PCR-denaturing gradient gel electrophoresis

AIMS

To identify the microbiota in meju, fermented cooked soya beans, that may directly affect the microbial communities of Korean fermented soya bean foods.

METHODS AND RESULTS

Using conventional bacterial 16S rDNA, bacilli-specific 16S rDNA or fungi 18S rDNA-specific primers, PCR products were amplified through a series of PCRs using the DNA extracted from ten meju samples. The amplicons were analysed using denaturing gradient gel electrophoresis (DGGE), which showed that Enterococcus durans was commonly detected in nine of ten meju samples. Bacillus subtilis was shown to be the major strain of bacilli in the samples tested. Based on the DGGE analysis of fungi in meju, we determined that Absidia corymbifera, Aspergillus sp. and Candida rugosa were the main fungi in the tested samples.

CONCLUSIONS

A variety of bacterial and fungal micro-organisms were identified in meju samples, in addition to the micro-organisms already known to be present.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report showing the differences and similarities in the populations of micro-organisms in meju samples using nested PCR-DGGE, a culture-independent method. The results may be applicable to the development of improved meju, in which the indigenous micro-organisms required for fermentation can be standardized.

Purification of a new antifungal compound produced by Lactobacillus plantarum AF1 isolated from kimchi

The aim of this study was to purify and to identify an antifungal compound of Lactobacillus plantarum AF1, which was isolated from kimchi, and to determine if Lb. plantarum AF1 can prevent fungal growth in a particular food model system. The antifungal compound was purified using SPE and recycling prep-HPLC and its structure was elucidated using NMR and ESI-MS. The active compound from Lb. plantarum AF1 is C(12)H(22)N(2)O(2), 3,6-bis(2-methylpropyl)-2,5-piperazinedion has a molecular mass of 226. This is a new antifungal compound produced by lactic acid bacteria (LAB). To investigate the potential application of the antifungal compound to eliminate fungal spoilage in food and feed, soybean was used as a model. White mycelia and dark green spores of Aspergillus flavus ATCC 22546 were observed in the control soybeans after 1 to 2days incubation. However, fungal growth was not observed in the soybeans treated with a 4-fold concentrated supernatant of Lb. plantarum AF1 culture, even after 2days. The end products produced from kimchi LAB, like 3,6-bis(2-methylpropyl)-2,5-piperazinedion identified in this study, may be a promising alternative to chemical preservatives as a potential biopreservative which prevent fungal spoilage and mycotoxin formation in food and feed.

Water-assisted CO(2) laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application

The glass-based microfluidic chip has widely been applied to the lab-on-a-chip for clotting tests. Here, we have demonstrated a capillary driven flow chip using the water-assisted CO(2) laser ablation for crackless fluidic channels and holes as well as the modified low-temperature glass bonding with assistance of adhesive polymer film at 300 degrees Celsius. Effect of water depth on the laser ablation of glass quality was investigated. The surface hydrophilic property of glass and polymer film was measured by static contact angle method for hydrophilicity examination in comparison with the conventional polydimethylsiloxane (PDMS) material. Both low-viscosity deionized water and high-viscosity whole blood were used for testing the capillary-driving flow behavior. The preliminary coagulation testing in the Y-channel chip was also performed using whole blood and CaCl(2) solution. The water-assisted CO(2) laser processing can cool down glass during ablation for less temperature gradient to eliminate the crack. The modified glass bonding can simplify the conventional complex fabrication procedure of glass chips, such as high-temperature bonding, long consuming time and high cost. Moreover, the developed fluidic glass chip has the merit of hydrophilic behavior conquering the problem of traditional hydrophobic recovery of polymer fluidic chips and shows the ability to drive high-viscosity bio-fluids.

Safrole-Induced Ca2+Mobilization and Cytotoxicity in Human PC3 Prostate Cancer Cells

The effect of the carcinogen safrole on intracellular Ca2+ mobilization and on viability of human PC3 prostate cancer cells was examined. Cytosolic free Ca2+ levels ([Ca2+]i) were measured by using fura-2 as a probe. Safrole at concentrations above 10 microM increased [Ca2+]i in a concentration-dependent manner with an EC50 value of 350 microM. The Ca2+ signal was reduced by more than half after removing extracellular Ca2+ but was unaffected by nifedipine, nicardipine, nimodipine, diltiazem, or verapamil. In Ca2+-free medium, after treatment with 650 microM safrole, 1 microM thapsigargin (an endoplasmic reticulum Ca2+ pump inhibitor) failed to release Ca2+. Neither inhibition of phospholipase C with U73122 nor modulation of protein kinase C activity affected safrole-induced Ca2+ release. Overnight incubation with 0.65-65 microM safrole did not affect cell viability, but incubation with 325-625 microM safrole decreased viability. Collectively, the data suggest that in PC3 cells, safrole induced a [Ca2+]i increase by causing Ca2+ release from the endoplasmic reticulum in a phospholipase C- and protein kinase C-independent fashion, and by inducing Ca2+ influx. Safrole can decrease cell viability in a concentration-dependent manner.

Melittin-induced [Ca2+]i increases and subsequent death in canine renal tubular cells

The effect of melittin on cytosolic free Ca2+ concentration ([Ca2+]i) and viability is largely unknown. This study examined whether melittin alters Ca2+ levels and causes Ca2+-dependent cell death in Madin-Darby canine kidney (MDCK) cells. [Ca2+]i and cell death were measured using the fluorescent dyes fura-2 and WST-1 respectively. Melittin at concentrations above 0.5 μM increased [Ca2+]i in a concentration-dependent manner. The Ca2+ signal was reduced by 75% by removing extracellular Ca2+. The melittin-induced Ca2+ influx was also implicated by melittin-caused Mn2+ influx. After pretreatment with 1 μM thapsigargin (an endoplasmic reticulum Ca2+ pump inhibitor), melittin-induced Ca2+ release was inhibited; and conversely, melittin pretreatment abolished thapsigargin-induced Ca2+ release. At concentrations of 0.5–20 μM, melittin killed cells in a concentration-dependent manner. The cytotoxic effect of 0.5 μM melittin was nearly completely reversed by prechelating cytosolic Ca2+ with BAPTA. Melittin at 0.5–2 μM caused apoptosis as assessed by flow cytometry of propidium iodide staining. Collectively, in MDCK cells, melittin induced a [Ca2+]i rise by causing Ca2+ release from endoplasmic reticulum and Ca2+ influx from extracellular space. Furthermore, melittin can cause Ca2+-dependent cytotoxicity in a concentration-dependent manner.

Fragment-specific fracture fixation and double-column plating of unstable distal radial fractures using AO mini-fragment implants and Kirschner wires

OBJECTIVE

To evaluate the efficacy of AO mini-fragment implants and 1.25-mm Kirschner wires using fragment-specific fracture fixation and double-column plating for displaced or unstable distal radial fractures.

DESIGN

prospective and consecutive.

SETTING

level II trauma hospital.

PARTICIPANTS

28 people with 30 fractures and an average follow-up of 21.1 (range 12-41) months, treated with fragment-specific fracture fixation.

OUTCOME MEASUREMENTS

anatomical assessment using anteroposterior and lateral radiographs, graded according to Sarmiento's modification of Lidstrom's scoring system. CLINICAL OUTCOME ASSESSMENT: DASH and Modified Gartland and Werley scores.

RESULTS

There were 24 excellent and 6 good radiological results. Final mean grip strength was 83% of uninjured side, and mean wrist range of motion was 61 degrees dorsiflexion, 54 degrees palmar flexion, 85 degrees supination and 83 degrees pronation. Gartland and Werley's demerit point system revealed 13 (43%) excellent, 12 (40%) good, 5 (17%) fair and no poor results. The mean DASH score was 18, with a standard deviation of +/-18.

CONCLUSION

This fixation method is a reliable and low-cost alternative with good clinical and anatomical results, particularly useful in open reduction and internal fixation of comminuted intra-articular distal radial fractures.

Identification of the agent from Lactobacillus plantarum KFRI464 that enhances bacteriocin production by Leuconostoc citreum GJ7

AIM

To provide evidence that the production of bacteriocin by lactic acid bacteria can be enhanced by the presence of a bacteriocin-sensitive strain and identify the agent that is responsible for enhancing bacteriocin production.

METHODS AND RESULTS

One bacteriocin-producing lactic acid bacterium was isolated from kimchi. The strain GJ7 was designated as Leuconostoc citreum GJ7 based on Gram staining, biochemical properties, and 16S rRNA gene sequencing. The isolate produced a heat- and pH-stable bacteriocin (kimchicin GJ7), which has antagonistic activity against a broad spectrum of micro-organisms. Tricine-sodium dodecyl sulfate-polyacrylamide gel electrophoresis of purified kimchicin GJ7 showed a single band of molecular weight c. 3500 Da. Cultures of Leuc. citreum GJ7 in the presence of thermally inactivated kimchicin GJ7-sensitive strains, Lactobacillus plantarum KFRI 464, Lactobacillus delbrueckii KFRI 347, or Leuconostoc mesenteroides KCTC 1628, increased bacteriocin production. This inducing factor was characterized and purified from Lact. plantarum KFRI 464, which showed the greatest enhancement of kimchicin GJ7 activity. The inducing factor was purified using a DEAE (diethyl aminoethyl)-Sephacel column and high-performance liquid chromatography, and yielded a single band of c. 6500 Da. N-terminal sequencing of the inducing factor identified 16 amino acids. The N-terminal sequence of the inducing factor was synthesized and examined for the induction of kimchicin GJ7 activity, and was found to induce activity, but at a level about 10% lower than that of the entire molecule.

CONCLUSIONS

The presence of a bacteriocin-sensitive strain, Lact. plantarum KFRI 464, acts as an environmental stimulus to activate the production of kimchicin GJ7 by Leuc. citreum GJ7. The inducing factor from Lact. plantarum KFRI 464 is highly homologous to the 30S ribosomal protein S16 from various micro-organisms. The N-terminal sequence of the inducing factor examined in this study is a very important sequence related to the inducing activity. Nevertheless, the inducing factor may not be part of the ribosomal protein S16 itself.

SIGNIFICANCE AND IMPACT OF THE STUDY

We believe that the present study is the first to identify an agent that is produced by one micro-organism and influences bacteriocin production in another. The bacteriocin-enhancing system described in this study could be effectively used to control the growth of other micro-organisms (sensitive cells) in food systems. Moreover, this enhancement of bacteriocin production can be applied usefully in industrial production of natural food preservatives.

Arthroscopic subacromial decompression for stage-II impingement

PURPOSE

To evaluate outcomes of arthroscopic subacromial decompression for stage-II impingement.

METHODS

Records of 42 consecutive patients with stage-II impingement treated by arthroscopic subacromial decompression from January 2000 to February 2002 were reviewed. Clinical outcomes were measured using the UCLA shoulder rating scale, and radiological outcomes using anteroposterior and supraspinatus outlet shoulder radiographs.

RESULTS

The mean follow-up period was 14.6 (range, 12-30) months. Using the UCLA scale, 14 (33%) patients had an excellent result, 21 (50%) had a good result, 4 (10%) had a fair result, and 3 (7%) had a poor result. Mean component scores for the UCLA scale were: 8.0 for pain, 8.8 for function, 4.5 for forward flexion, and 4.5 for strength. The mean extent of resection was 2.9 mm in the anteroposterior and 2.0 mm in the supraspinatus outlet radiographs. There was no correlation between the extent of acromial resection and the UCLA shoulder rating scores.

CONCLUSION

Short-term results of arthroscopic subacromial decompression for stage-II impingement are favourable.

Recognising tuberculosis in the lower lung field: an age- and sex-matched controlled study

OBJECTIVE

Tuberculosis (TB) can sometimes present with consolidation in the lower lung field. This study was conducted to compare the manifestations of lower-lung-field TB (LLFTB) and other pulmonary TB.

DESIGN

All new culture-proven TB patients with lower-lung-field consolidation from July 2001 through December 2002 were included. Age- and sex-matched TB patients with upper lung involvement were selected as controls.

RESULTS

A total of 79 patients with LLFTB were included. Their mean age was 58.8 years; 46 were male. The clinical, radiographic and laboratory findings were similar in the LLFTB and the control groups, except that the LLFTB patients had less cavitation (P = 0.005). Patients with LLFTB were diagnosed (P = 0.051) and treated (P = 0.001) later than the control patients. The calibres of the trachea and both main bronchi were significantly smaller in the LLFTB group (P < 0.001). More patients with LLFTB developed segmental or lobar atelectasis during follow-up (P = 0.028).

CONCLUSIONS

The manifestations of LLFTB are non-specific. The lower-lung involvement, the lower incidence of cavitation and the higher probability of segmental or lobar atelectasis implied that LLFTB was primary TB. A small bronchial calibre probably contributed to its development.

PARK6-linked autosomal recessive early-onset parkinsonism in Asian populations

The authors performed linkage analysis in 39 families with autosomal recessive early-onset PD (AR-EOPD) negative for parkin and DJ-1 mutations. Eight families including three Japanese, two Taiwanese, one Turkish, one Israeli, and one Philippine showed evidence of linkage with PARK6 with multipoint log of the odds (lod) score of 9.88 at D1S2732. The results indicate worldwide distribution of PARK6-linked parkinsonism.

Study on the relation between occupational fenvalerate exposure and spermatozoa DNA damage of pesticide factory workers

AIMS

To determine sperm nuclear DNA integrity and to investigate the relation between fenvalerate (FE) exposure and spermatozoa DNA damage.

METHODS

Sperm DNA fragmentation was detected by a modified alkaline single cell gel electrophoresis (Comet) assay and a terminal deoxynucleotidyl transferase mediated dUTP nick end labelling (TUNEL) assay. The olive tail moment (OTM) and percentage tail DNA were measured by the Comet assay, and cell positive percentage was measured by the TUNEL assay for DNA damage evaluation.

RESULTS

The DNA integrity of spermatozoa of external and internal control groups were both significantly greater than that of the FE exposed group. The median value of tail DNA percentage in the exposure group was 11.30, which was significantly higher than 5.60 in the internal control group and 5.10 in the external control group. The median value of OTM was 3.80 in the exposure group, significantly higher than 1.50 in the internal control group and 2.00 in the external control group. Mean cell positive was 31.2% in the exposure group, significantly higher than 17.4% in the internal control and 19.6% in the external control groups. Cell positive (%) was significantly correlated with tail DNA percentage and with OTM of whole subjects (n = 63).

CONCLUSIONS

Results showed that occupational FE exposure is associated with an increase in sperm DNA damage. A combination of the Comet and TUNEL assays would offer more comprehensive information for a better understanding of sperm DNA damage, and the biological significance of sperm DNA damage in sperm function and male infertility.

Study of prostaglandin receptors in mitochondria on apoptosis of human lung carcinoma cell line A549

PGs (prostaglandins) are synthesized through the cyclo-oxygenase (COX-1 and -2) pathway in a variety of cells in response to various physiological stimuli. All cells require at least one pathway for apoptosis, and mitochondrial play a central role in regulation of apoptosis. In a previous study, incubation of A549 cells with NS-398 (a COX-2-specific inhibitor) induced apoptosis and inhibited cell proliferation, and the concentrations of different PGs between various cellular compartments were found to be changed. To determine whether PG receptors are involved in this regulation, Western-blot analyses were performed specific for PGE2 (EP receptors) and PGF2α (FP receptor) receptors, which were expressed in A549 cells. Western-blot analysis revealed that mitochondria that were isolated from A549 cells expressed EP receptors (EP2, EP3 and EP4), whereas FP receptors were undetectable. EP receptors (EP1, EP3 and EP4) and FP receptors were detected from A549 cell membrane. These results suggest that the change of PG production in A549-cells-induced cancer cell apoptosis might be related to the different expressions of EP and FP receptors in cell and mitochondrial membrane.

Cancellous screw fixation for femoral neck fractures: one hundred and sixteen patients

INTRODUCTION

This paper evaluates the efficacy and safety of the use of cancellous screw fixation in the treatment of intracapsular femoral neck fractures in our local population.

MATERIALS AND METHODS

A retrospective analysis of the results of 116 cases that were performed in Singapore General Hospital and Changi General Hospital over a 2-year period was undertaken. The minimum period of follow-up was 2 years.

RESULTS

The median age of the study group was 71 years and approximately two-thirds were females. There were 104 (90%) cases of undisplaced (Garden 1 and 2) fractures and 12 (10%) displaced (Garden 3 and 4) fractures. The specific complication rate was much higher in the displaced group of patients. At 2 years' postoperation, 85% returned to their premorbid level of ambulation and 90% reported good pain relief. The 1-year mortality rate was 7%.

CONCLUSION

Cancellous screw fixation is a relatively safe and useful operation. It achieved our aim of returning most patients to their pre-fracture level of ambulation and providing good pain relief.

Rapid Identification of Yeasts Commonly Found in Positive Blood Cultures by Amplification of the Internal Transcribed Spacer Regions 1 and 2

A multiplex PCR method using one universal and eight species-specific primers was developed to rapidly identify eight yeast species found in positive blood cultures. The species-specific primers were designed from the internal transcribed spacer regions 1 and 2 of the rRNA gene, whereas the universal primer was located at the 26S rRNA gene. The eight species were Candida albicans, Candida glabrata, Candida guilliermondii, Candida krusei, Candida lusitaniae, Candida parapsilosis, Candida tropicalis, and Cryptococcus neoformans. The PCR products (116 to 630 bp) were different in length and could be effectively separated and recognized by polyacrylamide gel electrophoresis. By testing 234 positive blood cultures (237 isolates), 234 (98.7%) isolates of the above eight species were correctly identified by the multiplex PCR. The present method is simple to perform and can be completed within 6 h.

Ion trap mass spectrometry of fluorescently labeled nanoparticles

Mass spectra of fluorescently labeled polystyrene nanoparticles have been obtained using a combined technique of matrix-assisted laser desorption/ionization (MALDI), laser-induced fluorescence (LIF), and a dual quadrupole ion trap mass spectrometer. The spectrometer is designed in such a way that the first trap serves as a trapping and mass-analyzing device, while the second trap serves to capture and concentrate the ions ejected from the first trap for fluorescence detection. An enhancement in the LIF signal by more than 3 orders of magnitude is achieved with the help of the second trap, making mass/charge (m/z) analysis of the nanoparticles possible. Additional unique features of this mass spectrometer include that frequency scan (0.5-50 kHz) at a constant voltage (200 V), instead of voltage scan at a constant frequency, is implemented to widen the spectral analysis range of the instrument. The implementation has allowed the spectrometer to operate at relatively high buffer gas pressures (50 mTorr), crucial for effective trapping of the nanometer-sized particles generated by MALDI. We present in this report the first mass spectra of fluorescently labeled nanoparticles with a size of 27 nm using this new mass spectrometric approach. The utility of this method in the study of biological macromolecules or particles is demonstrated with dye-labeled IgG.

A case of Bizarre Parosteal Osteochondromatous Proliferation of the hand

We report a case of Bizarre Parosteal Osteochondromatous Proliferation (BPOP) of the hand that was initially misdiagnosed as an osteochondroma. BPOP, although a benign lesion, behaves aggressively with rapid growth and high risk of local recurrence after local resection. The distinguishing features of BPOP as opposed to an osteochondroma are discussed.

The growth and development of orthopaedic sports medicine in Singapore

Orthopaedic sports medicine is currently a well established subspecialty of orthopaedic surgery in Singapore. It had its beginnings in the late 1960s and has since grown to be one of the major orthopaedic subspecialties. Knee, shoulder and ankle injuries constitute the majority of cases seen by the orthopaedic sports medicine specialists. Significant scientific contributions to the international literature have been made by our specialists over the years. Today, Singapore is a regional hub for the provision of orthopaedic sports medicine care and training.

Optical detection and charge-state analysis of MALDI-generated particles with molecular masses larger than 5 MDa

Charged polystyrene nanoparticles are generated by matrix-assisted laser desorption/ionization (MALDI) and detected by laser-induced fluorescence (LIF) in a quadrupole ion trap. Employing the LIF technique, observations of individual fluorescent nanospheres (27 nm in diameter and containing 180 fluorescein dye equivalents) have been achieved with an average signal-to-noise ratio of approximately 10. With the trap operating at a frequency around 5 kHz, charge state analysis of the particles reveals that the number of charges carried by the spheres is between 1 and 10. It suggests a mass-to-charge ratio (m/z) in the range of 10(5)-10(6) for the MALDI-generated particles. To effectively trap such large particles (m > 5 MDa), damping of the particles' motions by using approximately 50 mTorr He buffer gas is absolutely required. Similar findings are obtained for particles with a nominal size of 1 microm in diameter, demonstrating that production of charged particles with a molecular mass as high as 10(12) Da is possible using the MALDI technique.

Extremity osteosarcoma--a Southeast Asian experience

INTRODUCTION

We present our experience with limb salvage emphasising the use of vascularised bone grafts in combination with autoclaved tumour bone for limb salvage in osteosarcoma.

MATERIALS AND METHODS

Thirty-six cases with extremity osteosarcoma, all of which were managed at a single institution between 1980 and 1999, were reviewed at a mean follow-up of 9 years (range, 10 months to 200 months). There were 26 patients who underwent limb salvage surgery and 10 patients who had amputation.

RESULTS

In the limb salvage group, 12 bone defects were bridged using vascularised bone grafts alone while autoclaved tumour bone was used for reconstruction in the remaining 14 patients. In these 14, there were 10 with autoclaved tumour bone and vascularised bone, 2 with autoclaved bone and non-vascularised bone and 2 with autoclaved bone alone. The joint was preserved in 13 of the 26 reconstructions. Of these, 11 involved preservation of the knee joint contributing to a quantum gain in function with 84% good and excellent results. The actuarial survival was 64% at 2 years and 48% at 5 years, with no significant difference between ablation and limb salvage.

CONCLUSION

The use of the autoclaved bone provided yet another effective alternative for bridging large defects following resection of high grade tumours.

Single-particle mass spectrometry of polystyrene microspheres and diamond nanocrystals

High-resolution mass spectra of single submicrometer-sized particles are obtained using an electrospray ionization source in combination with an audio frequency quadrupole ion-trap mass spectrometer. Distinct from conventional methods, light scattering from a continuous Ar-ion laser is detected for particles ejected out of the ion trap. Typically, 10 particles are being trapped and interrogated in each measurement. With the audio frequency ion trap operated in a mass-selective instability mode, analysis of the particles reveals that they all differ in mass-to-charge ratio (m/z), and the individual peak in the observed mass spectrum is essentially derived from one single particle. A histogram of the spectra acquired in 10(2) repetitions of the experiment is equivalent to the single spectrum that would be observed when an ion ensemble of 10(3) particles is analyzed simultaneously using the single-particle mass spectrometer (SPMS). To calibrate such single-particle mass spectra, secular frequencies of the oscillatory motions of the individual particle within the trap are measured, and the trap parameter qz at the point of ejection is determined. A mass resolution exceeding 10(4) can readily be achieved in the absence of ion ensemble effect. We demonstrate in this work that the SPMS not only allows investigations of monodisperse polystyrene microspheres, but also is capable of detecting diamond nanoparticles with a nominal diameter of 100 nm, as well.

Development of a topical suspension containing three active ingredients

The objective of this study was to develop a topical suspension that contains sarafloxacin hydrochloride (1 mg/mL), triamcinolone acetonide (1 mg/mL), and clotrimazole (10 mg/mL), and is stable at room temperature (15-28 degrees C) for clinical usage. Due to the difference in the physicochemical properties and chemical stability profiles of these three active ingredients, it is a challenge to develop a stable suspension formulation containing these three drugs. In this study, the stability of these drugs in different buffer solutions was determined under different accelerated isothermal conditions. The Arrhenius equation was subsequently utilized to predict the room-temperature stability of these three drugs in these buffer solutions. By knowing the room-temperature solubility of the drugs in the buffer solution, the stability of the drugs in suspension was predicted. As a result, a 0.02 M phosphate buffer (pH 7.0) containing 0.02% (w/v)polysorbate 20, 1% (w/v) NaCl, and 0.1% (w/v) EDTA was determined to be an acceptable medium. In addition, 0.35% (w/v) high-viscosity carboxymethylcellulose (HV-CMC) was first selected as the suspending agent to enhance the redispersibility of the suspension. Stability data further supported that all three drugs were stable in the suspension containing HV-CMC with less than 5% potency loss for at least 6 months at 40 degrees C and 12 months at 25 degrees C. However, the viscosity drop of this HV-CMC formulation at 25 degrees C and 40 degrees C became a product stability concern. To improve the viscosity stability of the suspension, the medium-viscosity carboxymethylcellulose (MV-CMC) was selected to replace the HV-CMC as the suspending agent. The optimal combination of MV-CMC and sodium chloride in achieving the most desirable dispersion properties for the formulation was determined through the use of a 32 factorial design. The optimal formulation containing 1% MV-CMC and 1% sodium chloride has shown improved viscosity stability during storage and has been used for clinical studies.

Metastasis of an adenocarcinoma of the stomach to the 4th metacarpal bone

Metastatic tumours of the hand are uncommon. The majority of these tumours affect the phalanges and the primary tumours are usually bronchogenic in origin, with breast and kidney tumours next in frequency. Metastatic gastrointestinal to the hand is rare and usually from the colon. We report a case of poorly differentiated adenocarcinoma of the stomach antrum presenting with a metastatic lesion to the right 4th metacarpal bone. A review of the literature is included.

Conservative treatment of redisplaced Colles' fractures in elderly patients older than 60 years old - anatomical and functional outcome

A retrospective study was carried out to compare the functional outcome in two groups of patients who were 60 years old or older. One group had Colles' fractures, which had been reduced and did not redisplace. The other group's fractures redisplaced and were treated conservatively. Of the 11 patients in the first group, 82% had excellent or good functional outcome, which was not significantly different when compared with the second group of 25 patients with 68% having excellent or good functional outcome.

T cell responses modulated through interaction between CD8alphaalpha and the nonclassical MHC class I molecule, TL

The thymus leukemia antigen (TL) is a nonclassical class I molecule, expressed abundantly on intestinal epithelial cells. We show that, in contrast to other major histocompatibility complex (MHC) class I molecules that bind CD8alphabeta, TL preferentially binds the homotypic form of CD8alpha (CD8alphaalpha). Thus, TL tetramers react specifically to CD8alphaalpha-expressing cells, including most intestinal intraepithelial lymphocytes. Compared with CD8alphabeta, which recognizes the same MHC as the T cell receptor (TCR) and thus acts as a TCR coreceptor, high-affinity binding of CD8alphaalpha to TL modifies responses mediated by TCR recognition of antigen presented by distinct MHC molecules. These findings define a novel mechanism of lymphocyte regulation through CD8alphaalpha and MHC class I.