Reactive Oxygen Species (ROS)-Assisted Nano-Therapeutics Surface-Decorated with Epidermal Growth Factor Fragments for Enhanced Wound Healing

In this study, stimuli-responsive liberation of an epidermal growth factor fragment (EGFfr) is accomplished using nanofibrous meshes to improve wound healing effects. Electrospun nanofibers are fragmented by mechanical milling, followed by aminolysis to fabricate powdered nanofibrils (NFs). EGFfrs are covalently immobilized on NFs via thioketal linkers (EGFfr@TK@NF) for reactive oxygen species (ROS)-dependent liberation. EGFfr@TK@NF exhibits ROS-responsive liberation of EGFfr from the matrix at hydrogen peroxide (H2 O2 ) concentrations of 0-250 mm. Released EGFfr is confirmed to enhance the migration of HaCaT cell monolayers, and keratinocytic gene expression levels are significantly enhanced when H2 O2 is added to obtain the released fraction of NFs. An in vivo study on the dorsal wounds of mice reveals that EGFfr-immobilized NFs improve the expression levels of keratin1, 5, and 14 for 2 weeks when H2 O2 is added to the wound sites, suggesting that the wounded skin is re-epithelized with the original epidermis. Thus, EGFfrs-immobilized NFs are anticipated to be potential nanotherapeutics for wound treatment in combination with the conventional disinfection process with H2 O2 .

Liposome-assisted penetration and antiaging effects of collagen in a 3D skin model

BACKGROUND

Collagen is a major component of the extracellular matrix that supports the epidermal layers of the skin; thus, many strategies have been made to enhance the topical delivery of collagen for antiaging purposes. In addition, our previous study indicated that liposome can help the penetration of active ingredients into the skin.

AIMS

To produce stable collagen-encapsulated liposomes to improve the topical delivery of collagen.

METHODS

Collagen-encapsulated liposomes were fabricated using high-pressure homogenization method. The colloidal stability and adhesion ability were confirmed using dynamic light scattering, and spectrofluorophotometer, respectively. Keratinocyte differentiations of 3D skin before and after treatment with collagen-encapsulated liposomes were confirmed by real-time PCR.

RESULTS

In comparison with native collagen, collagen-encapsulated liposomes enhanced collagen retention in artificial membranes by twofold, even after repeated washings with water. In addition, real-time PCR results indicated that 3D skin treated with collagen-encapsulated liposomes exhibited higher levels of collagen, keratin, and involucrin, even after ethanol treatment.

CONCLUSION

Liposomes could serve as efficient delivery vehicles for collagen, thereby enhancing its antiaging effects.

Spectroscopic techniques for monitoring stem cell and organoid proliferation in 3D environments for therapeutic development

Spectroscopic techniques for monitoring stem cell and organoid proliferation have gained significant attention in therapeutic development. Spectroscopic techniques such as fluorescence, Raman spectroscopy, and infrared spectroscopy offer noninvasive and real-time monitoring of biochemical and biophysical changes that occur during stem cell and organoid proliferation. These techniques provide valuable insight into the underlying mechanisms of action of potential therapeutic agents, allowing for improved drug discovery and screening. This review highlights the importance of spectroscopic monitoring of stem cell and organoid proliferation and its potential impact on therapeutic development. Furthermore, this review discusses recent advances in spectroscopic techniques and their applications in stem cell and organoid research. Overall, this review emphasizes the importance of spectroscopic techniques as valuable tools for studying stem cell and organoid proliferation and their potential to revolutionize therapeutic development in the future.

Cell-directed assembly of luminal nanofibril fillers in nerve conduits for peripheral nerve repair

Graphene and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), have attracted significant attention in the field of tissue engineering, particularly in nerve and muscle regeneration, owing to their excellent electrical conductivity. This paper reports the fabrication of cell-mixable rGO-decorated polycaprolactone (PCL) nanofibrils (NFs) to promote peripheral nerve repair with the assistant of electron transmission by rGO and cytokine paracrine by stem cells. Oxidized GO (GO-COOH) and branched polyethylenimine are layer-by-layer coated on hydrolyzed PCL NFs via electrostatic interaction, and the number of layering is manipulated to adjust the GO-COOH coating amount. The decorated GO-COOH is reduced in situ to rGO for electrical conductivity retrieval. PC12 cells cultivated with rGO-coated NF demonstrate spontaneous cell sheet assembly, and neurogenic differentiation is observed upon electrical stimulation. When transplant nerve guidance conduit containing the assembly of rGO-coated NF and adipose-derived stem cell to the site of neurotmesis injury of a sciatic nerve, animal movement is enhanced and autotomy is ameliorated for 8 weeks compared to transplanting the hollow conduit only. Histological analysis results reveal higher levels of muscle mass and lower levels of collagen deposition in the triceps surae muscle of the rGO-coated NF-treated legs. Therefore, the rGO-layered NF can be tailored to repair peripheral nerve injuries in combination with stem cell therapy.

Reactive oxygen species-responsive clicked assembly of gold nanoparticles to enhance photothermal therapy

To enhance the efficacy of photothermal therapy (PTT) at tumor sites, we designed a reactive oxygen species (ROS)-responsive gold nanoparticle (AuNP)-based nanosystem in which azide-decorated AuNPs (N₃@AuNPs) and diselenide-coated alkyne-decorated AuNPs (Se/Ak@AuNPs) were separately prepared for selective clicking into nanoclusters when exposed to ROS. Se/Ak@AuNPs were dual-functionalized with alkyne moieties and diselenide linkers embedded in a long chain of polyethylene glycol (PEG) to enable the alkyne moieties of Se/Ak@AuNPs to be inaccessible to the azide moieties of N₃@AuNPs owing to steric hindrance. At tumor sites where the ROS level is elevated due to the increased metabolic activity, cellular receptor signaling, mitochondrial dysfunction, and oncogene activity, the diselenide linkers were cleaved, leading to the liberation of the long PEG chains tethered to AuNPs, and the alkyne moieties could be recognized by the surrounding azide moieties to generate a click reaction. The clicked AuNPs formed clustered nanoparticles with increased size. Upon 808 nm laser irradiation, these large clusters of AuNPs significantly enhanced the photothermal conversion efficiency compared with that of isolated AuNPs. In vitro studies revealed that the AuNP clusters exhibited a noticeably higher apoptosis rate than AuNPs. Therefore, ROS-responsive clicked AuNP clusters can be a potential tool for PTT enhancement in cancer treatment.

Korean Amberjack Skin-Inspired Hyaluronic Acid Bioink for Reconstruction of Human Skin

Decellularized extracellular matrix (dECM) has been extensively employed as tissue engineering scaffolds because its components can greatly enhance the migration and proliferation of cultivating cells. In this study, we decellularized Korean amberjack skin and incorporated soluble fractions in hyaluronic acid hydrogels with 3D-printed tissue engineering hydrogels to overcome any limitation of animal-derived dECM. The hydrolyzed fish-dECM was mixed with methacrylated hyaluronic acid and chemically crosslinked to 3D-printed fish-dECM hydrogels, where fish-dECM contents affected both printability and injectability of the hydrogels. Swelling ratios and mass erosion of the 3D-printed hydrogels were dependent on fish-dECM contents, where higher fish-dECM in the hydrogel increased swelling ratios and mass erosion rates. The higher content of fish-dECM considerably enhanced the viability of the incorporated cells in the matrix for 7 days. Artificial human skin was constructed by seeding human dermal fibroblasts and keratinocytes in the 3D-printed hydrogels, and a formation of a bilayered skin was visualized with tissue staining. Thus, we envision that 3D-printed hydrogels containing fish-dECM can be an alternative bioink composed of a non-mammal-derived matrix.

Highly selective and quantitative in situ monitoring of cell surface proteins by SERS immunoassay system

Due to their pivotal roles in many biological functions, cell surface proteins (CSPs) are often used for cancer prognosis, as evidenced by a number of studies that have reported significant changes in the expression levels of specific surface proteins depending on the stage of tumorigenesis and selection/variety of reprogrammed cells during cell fate conversion. Current CSP detection strategies suffer from poor selectivity and lack the ability for in situ analysis but maintain the spatial information between cells. Here, we have fabricated nanoprobes for surface-enhanced Raman scattering (SERS) immunoassays by conjugating a specific antibody onto silica-coated gold nanoparticles incorporating an individual Raman reporter (Au-tag@SiO₂-Ab NPs) for highly sensitive and selective in situ detection in different types of cells. When multiple HEK293 cell lines stably expressing different levels of the CSP, ACE2, were investigated by the SERS immunoassay, we demonstrated that the level of ACE2 expression in each cell line could be statistically distinguished from that in the other cell lines, indicating the quantitative feature of this biosensing system. When detecting living cells without cell lysis or fixation, as well as fixed cells, the levels of the epithelial CSPs, EpCAM (epithelial cell adhesion molecule) and E-cadherin, were successfully determined using our Au-tag@SiO₂-Ab NPs and SERS immunoassay system in a highly selective and quantitative manner without significant cytotoxicity. Hence, our work provides technical insight into the development of a biosensing platform for a variety of biomedical applications, such as cancer metastasis prognosis and the in situ monitoring of stem cell reprogramming and differentiation.

Clinical evaluation of the brightening effect of chitosan-based cationic liposomes

BACKGROUND

Cationic liposomes can enhance the permeability of drugs in 3-D skin. Chitosan is considered a safe material for percutaneous delivery; thus, this study uses chitosan-incorporated cationic liposomes.

AIMS

This study investigated the improvement in skin brightness, melanin, and melasma after treatment niacinamide-incorporated chitosan cationic liposomes.

METHODS

A skin brightening agent, niacinamide, was formulated into cationic liposomes to facilitate percutaneous absorption and was clinically tested in 21 Korean female subjects. Cationic liposomes were prepared using a high-pressure homogenizer after mixing an oil phase containing lecithin and cholesterol and an aqueous phase containing niacinamide and chitosan.

RESULTS

The cationic liposomes exhibited stability over 28 days, with a particle size of 255-275 nm and zeta potential of 10-14 mV. Cationic liposomes containing niacinamide and a control formulation were applied to the left and right side of the face, respectively, twice daily for 28 days. Skin brightness, melanin index, and area of melasma were significantly enhanced where cationic liposomes were used, in comparison with formulations without cationic liposomes, demonstrating a 1.38-2.08-fold improvement.

CONCLUSION

Thus, we established that chitosan liposomes augmented the percutaneous absorption of niacinamide and improved the appearance of the skin.

Electrospun Nanofibrils Surface-Decorated with Photo-Cross-Linked Hyaluronic Acid for Cell-Directed Assembly

Hyaluronic acid (HA) was chemically immobilized on the surface of electrospun nanofibrils to form a cell/NF complex. Poly(caprolactone) (PCL) was electrospun into nanofibrous mats that were subsequently aminolyzed into nanofibrils. The aminolyzed nanofibrils were surface-decorated with methacrylated HA via Michael type addtion and by photo-cross-linking. Fourier transform infrared spectroscopy revealed the presence of HA on the surface of the nanofibrils. The thermogravimetric and colorimetric analyses indicate that the degree of HA immobilization could be varied by varying the photo-cross-linking duration. Thus, on increasing the photo-cross-linking duration, the swelling ratios increased gradually, and the surface charge of the decorated nanofibrils decreased. NIH3T3 cells and surface-decorated nanofibrils spontaneously assembled into the cell/NF complex. A higher degree of surface-immobilized HA enhanced cell viability and proliferation compared to nanofibrils without surface-immobilized HA. Thus, we envision that HA-immobilized nanofibrils can be employed as a tissue-engineering matrix to control cell proliferation and differentiation.

Discovery of E3 Ligase Ligands for Target Protein Degradation

Target protein degradation has emerged as a promising strategy for the discovery of novel therapeutics during the last decade. Proteolysis-targeting chimera (PROTAC) harnesses a cellular ubiquitin-dependent proteolysis system for the efficient degradation of a protein of interest. PROTAC consists of a target protein ligand and an E3 ligase ligand so that it enables the target protein degradation owing to the induced proximity with ubiquitin ligases. Although a great number of PROTACs has been developed so far using previously reported ligands of proteins for their degradation, E3 ligase ligands have been mostly limited to either CRBN or VHL ligands. Those PROTACs showed their limitation due to the cell type specific expression of E3 ligases and recently reported resistance toward PROTACs with CRBN ligands or VHL ligands. To overcome these hurdles, the discovery of various E3 ligase ligands has been spotlighted to improve the current PROTAC technology. This review focuses on currently reported E3 ligase ligands and their application in the development of PROTACs.

Recent Advances in Monitoring Stem Cell Status and Differentiation Using Nano-Biosensing Technologies

In regenerative medicine, cell therapies using various stem cells have received attention as an alternative to overcome the limitations of existing therapeutic methods. Clinical applications of stem cells require the identification of characteristics at the single-cell level and continuous monitoring during expansion and differentiation. In this review, we recapitulate the application of various stem cells used in regenerative medicine and the latest technological advances in monitoring the differentiation process of stem cells. Single-cell RNA sequencing capable of profiling the expression of many genes at the single-cell level provides a new opportunity to analyze stem cell heterogeneity and to specify molecular markers related to the branching of differentiation lineages. However, this method is destructive and distorted. In addition, the differentiation process of a particular cell cannot be continuously tracked. Therefore, several spectroscopic methods have been developed to overcome these limitations. In particular, the application of Raman spectroscopy to measure the intrinsic vibration spectrum of molecules has been proposed as a powerful method that enables continuous monitoring of biochemical changes in the process of the differentiation of stem cells. This review provides a comprehensive overview of current analytical methods employed for stem cell engineering and future perspectives of nano-biosensing technologies as a platform for the in situ monitoring of stem cell status and differentiation.

Process monitoring of photocatalytic degradation of 2,4-dinitrotoluene by Au-decorated Fe3O4@TiO2 nanoparticles: surface-enhanced Raman scattering method

Recently, the degradation and detection of 2,4-dinitrotoluene (2,4-DNT) capable of producing 2,4,6-trinitrotoluene (TNT) for environmental and human health risks have been developed. We prepared photoresponsive Au-decorated Fe₃O₄@TiO₂ nanoparticles (Fe₃O₄@TiO₂-Au NPs) under sunlight simulated Xe lamp irradiation. The photodegradation process of 2,4-DNT by Fe₃O₄@TiO₂-Au NPs was successfully monitored by surface-enhanced Raman scattering (SERS). Since SERS monitoring shows intrinsic information about the molecular structure, it was possible to predict the photodegradation of 2,4-DNT. The 2,4-DNT photodegradation mechanism based on two-dimensional correlation spectroscopy (2D-COS), which provides very beneficial information for a deeper understanding of systems, has been identified. We confirmed that Fe₃O₄@TiO₂-Au NPs can be widely used in organic pollutant degradation under sunlight. Furthermore, the combination of SERS based process monitoring and 2D-COS can be a convincing analytical technique for photodegradation studies of organic pollutants.

Fluorescence-Shadowing Nanoparticle Clusters for Real-Time Monitoring of Tumor Progression

Monitoring tumor progression is important for elucidating appropriate therapeutic strategies in response to anticancer therapeutics. To fluorescently monitor the in vivo levels of tumor-specific enzymes, we prepared matrix metalloprotease (MMP)-responsive gold nanoparticle (AuNP) clusters to sense tumor microenvironments. Specifically, AuNPs and quantum dots (QDs) were surface-engineered with two poly(ethylene glycol) [PEG] shells and cyclooctyne moieties, respectively, for the copper-free click reaction. Upon "peeling off" of the secondary shell from the double-PEGylated AuNPs under MMP-rich conditions, shielded azide moieties of the AuNPs were displayed toward the QD, and those two particles were clicked into nanoparticle clusters. This consequently resulted in a dramatic size increase and fluorescence quenching of QDs via fluorescence energy transfer (FRET) due to the molecular proximity of the particles. We observed that FRET efficiency was modulated via changes in MMP levels and exposure time. Cancer cell numbers exhibited a strong correlation with FRET efficiency, and in vivo studies that employed solid tumor models accordingly showed that FRET efficiency was dependent on the tumor size. Thus, we envision that this platform can be tailored and optimized for tumor monitoring based on MMP levels in solid tumors.

Light-triggered Structural Modulation of Nanofibrous Meshes to Promote Deep Penetration of Cultured Cells

Although nanofibrous meshes are considered promising cultivation beds for maintaining cell differentiation, three-dimensional (3D) cultivation is not possible because their nanoporous structures impede cell infiltration. To facilitate transverse cell migration across nanofibrous meshes, we prepared electrospun nanofibers with structures that varied in response to red laser light. Polyoxalate (POX), composed of oxalate linkers and oligomeric caprolactone, was synthesized and electrospun into fibrous meshes with a photosensitizer (chlorin e6: Ce6). These meshes exhibited morphological and chemical changes upon laser irradiation, and mass erosion rates of the meshes were faster after laser irradiation. Cell cultivation on POX meshes revealed that red laser effectively facilitated traverse migration of the cells without affecting cell viability. We envision the use of light-triggered change of meshes to promote the migration of cells during 3D matrix cultivation. This article is protected by copyright. All rights reserved.

Atom transfer radical-polymerized cationic shells on gold nanoparticles for near infrared-triggered photodynamic therapy of tumor-bearing animals

Gold nanoparticles (AuNPs) were surface-engineered with a cationic corona to enhance the incorporation of photosensitizers for photodynamic therapy (PDT). The cationic corona composed of poly(2-(dimethylamino)ethyl methacrylate) was atom transfer radical-polymerized on the surface of the AuNPs. The cationic corona of the engineered surface was characterized by dynamic light scattering, electron microscopy, Raman spectroscopy, and mass spectroscopy. Chlorin-e6 (Ce6) incorporated onto the surface-engineered AuNPs exhibited higher cell incorporation efficiency than bare AuNPs. Ce6-incorporated AuNPs were confirmed to release singlet oxygen upon NIR irradiation. Compared to Ce6, Ce6-incorporated AuNPs exhibited higher cellular uptake and cytotoxicity against cancer cells in an irradiation time-dependent manner. Near-infrared-irradiated animals administered Ce6-incorporated AuNPs exhibited higher levels of tumor suppression without noticeable body weight loss. This result was attributed to the higher localization of Ce6 at the tumor sites to induce cancer cell apoptosis. Thus, we envision that engineered AuNPs with cationic corona can be tailored to effectively deliver photosensitizers to tumor sites for photodynamic therapy.

Modulating Mechanism of the LSPR and SERS in Ag/ITO Film: Carrier Density Effect

Herein, we fabricated a uniform and dispersible Ag/indium tin oxide (ITO) cosputtered film on a two-dimensional ordered polystyrene template and observed distinct localized surface plasmon resonance (LSPR) properties that can be tuned by changing the doping level. The increase in the optical band gap is due to the variation in the metallic Ag content, which can effectively change the accumulation of free electrons in the conduction band, in addition to the near-IR absorbance. Surface-enhanced Raman scattering (SERS) was used to monitor the variations in the band gap and transfer of electrons, which causes variations in the SERS intensity. The presented research provides new insights into the relationships between the carrier density and maximum absorption wavelength, band gap distribution, and charge transfer process. This is the first study on the influence of the carrier density on the properties of Ag/ITO cosputtered films and suggests practical applications of these films.

Preparation of Stretchable Nanofibrous Sheets with Sacrificial Coaxial Electrospinning for Treatment of Traumatic Muscle Injury

Traumatic muscle injury with massive loss of muscle volume requires intramuscular implantation of proper scaffolds for fast and successful recovery. Although many artificial scaffolds effectively accelerate formation and maturation of myotubes, limited studies are showing the therapeutic effect of artificial scaffolds in animal models with massive muscle injury. In this study, improved myotube differentiation is approved on stepwise stretched gelatin nanofibers and applied to damaged muscle recovery in an animal model. The gelatin nanofibers are fabricated by a two-step process composed of co-axial electrospinning of poly(ɛ-caprolactone) and gelatin and subsequent removal of the outer shells. When stepwise stretching is applied to the myoblasts on gelatin nanofibers for five days, enhanced myotube formation and polarized elongation are observed. Animal models with volumetric loss at quadriceps femoris muscles (>50%) are transplanted with the myotubes cultivated on thin and flexible gelatin nanofiber. Treated animals more efficiently recover exercising functions of the leg when myotubes and the gelatin nanofiber are co-implanted at the injury sites. This result suggests that mechanically stimulated myotubes on gelatin nanofiber is therapeutically feasible for the robust recovery of volumetric muscle loss.

Comparison Study of the Effects of Cationic Liposomes on Delivery across 3D Skin Tissue and Whitening Effects in Pigmented 3D Skin

Charged phospholipids are employed to formulate liposomes with different surface charges to enhance the permeation of active ingredients through epidermal layers. Although 3D skin tissue is widely employed as an alternative to permeation studies using animal skin, only a small number of studies have compared the difference between these skin models. Liposomal delivery strategies are investigated herein, through 3D skin tissue based on their surface charges. Cationic, anionic, and neutral liposomes are formulated and their size, zeta-potential, and morphology are characterized using dynamic light scattering and cryogenic-transmission electron microscopy (cryo-TEM). A Franz diffusion cell is employed to determine the delivery efficiency of various liposomes, where all liposomes do not exhibit any recognizable difference of permeation through the synthetic membrane. When the fluorescence liposomes are applied to 3D skin, considerable fluorescence intensity is observed at the stratum cornea and epithelium layers. Compared to other liposomes, cationic liposomes exhibit the highest fluorescence intensity, suggesting the enhanced permeation of liposomes through the 3D skin layers. Finally, the ability of niacinamide (NA)-incorporated liposomes to suppress melanin transfer in pigmented 3D skin is examined, where cationic liposomes exhibit the highest degree of whitening effects.

Coaxial Electrospun Nanofibers with Different Shell Contents to Control Cell Adhesion and Viability

Electrospun nanofibers are widely employed as cell culture matrices because their biomimetic structures resemble a natural extracellular matrix. However, due to the limited cell infiltration into nanofibers, three-dimensional (3D) construction of a cell matrix is not easily accomplished. In this study, we developed a method for the partial digestion of a nanofiber into fragmented nanofibers composed of gelatin and polycaprolactone (PCL). The PCL shells of the coaxial fragments were subsequently removed with different concentrations of chloroform to control the remaining PCL on the shell. The swelling and exposure of the gelatin core were manipulated by the remaining PCL shells. When cells were cultivated with the fragmented nanofibers, they were spontaneously assembled on the cell sheets. The cell adhesion and proliferation were significantly affected by the amount of PCL shells on the fragmented nanofibers.

Gold nanospheres and nanorods for anti-cancer therapy: comparative studies of fabrication, surface-decoration, and anti-cancer treatments

Various gold nanoparticles have been explored as cancer therapeutics because they can be widely engineered for use as efficient drug carriers and diagnostic agents, and in photo-irradiation therapy. In the current review, we focused on shape-dependent biomedical applications of gold nanoparticles including gold nanospheres and nanorods. Fabrication and functionalization strategies of two different gold nanoparticles for anti-cancer therapy are introduced and the distinguishing performance depending on the shape is discussed to suggest the best carrier shape for specific applications. Moreover, recent advances in anti-cancer immunotherapy using gold nano-carriers are discussed. Thus, this comparative review can be helpful in deciding on suitable shapes and surface-modification strategies for preparing various gold nanoparticle-based therapeutics in anti-cancer therapy.

Protein-reactive nanofibrils decorated with cartilage-derived decellularized extracellular matrix for osteochondral defects

Cartilage defect is difficult to heal due to its avascular properties. Implantation of mesenchymal stem cell is one of the most promising approach for regenerating cartilage defects. Here we prepared polymeric nanofibrils decorated with cartilage-derived decellularized extracellular matrix (dECM) as a chondroinductive scaffold material for cartilage repair. To fabricate nanofibrils, eletrospun PCL nanofibers were fragmented by subsequent mechanical and chemical process. The nanofibrils were surface-modified with poly(glycidyl methacrylate) (PGMA@NF) via surface-initiated atom transfer radical polymerization (SI-ATRP). The epoxy groups of PGMA@NF were subsequently reacted with dECM prepared from bovine articular cartilage. Therefore, the cartilage-dECM-decorated nanofibrils structurally and biochemically mimic cartilage-specific microenvironment. Once adipose-derived stem cells (ADSCs) were self-assembled with the cartilage-dECM-decorated nanofibrils by cell-directed association, they exhibited differentiation hallmarks of chondrogenesis without additional biologic additives. ADSCs in the nanofibril composites significantly increased expression of chondrogenic gene markers in comparison to those in pellet culture. Furthermore, ADSC-laden nanofibril composites filled the osteochondral defects compactly due to their clay-like texture. Thus, the ADSC-laden nanofibril composites supported the long-term regeneration of 12 weeks without matrix loss during joint movement. The defects treated with the ADSC-laden PGMA@NF significantly facilitated reconstruction of their cartilage and subchondral bone ECM matrices compared to those with ADSC-laden nanofibrils, non-specifically adsorbing cartilage-dECM without surface decoration of PGMA.

Sex-specific association of urate and levodopa-induced dyskinesia in Parkinson's disease

BACKGROUND AND PURPOSE

As a major antioxidant, uric acid (UA) is known to be associated with the clinical progression of Parkinson's disease (PD). This study investigated whether baseline UA levels are associated with the risk for levodopa-induced dyskinesia (LID) in PD in a sex-dependent manner.

METHODS

In all, 152 patients with de novo PD (78 males and 74 females) who were followed up for >2 years were enrolled. The effect of baseline serum UA levels on LID-free survival was assessed by Cox regression, separately for sex, whilst being adjusted for potential confounding factors. The optimal UA level cut-off value to determine the high-risk group for LID was set using Contal and O'Quigley's method.

RESULTS

Levodopa-induced dyskinesia developed in 23 (29.5%) male patients and 30 (40.5%) female patients. Cox regression showed a significant interaction between UA level and sex. Higher UA levels were associated with a higher risk for LID in male PD patients (hazard ratio 1.380; 95% confidence interval 1.038-1.835; P = 0.027), although this relationship was not observed in female PD patients. The optimal UA level cut-off for LID in male PD was 7.2 mg/dl, and the high UA group had a 5.7-fold higher risk of developing LID than the low UA group.

CONCLUSIONS

Contrary to a presumptive beneficial role of UA, the present study demonstrated that higher UA levels are associated with increased risk of LID occurrence in male patients with PD, suggesting a sex-dependent role of UA in LID.

Cognitive anosognosia is associated with frontal dysfunction and lower depression in Parkinson's disease

BACKGROUND AND PURPOSE

Anosognosia refers to a deficit of self-awareness or impaired insight for cognitive and behavioral problems. Cognitive anosognosia was explored in de novo patients with Parkinson's disease (PD) and its relationship to cognitive function and neuropsychiatric symptoms was investigated.

METHODS

The cross-sectional study enrolled 340 drug-naïve patients with PD. According to the presence of mild cognitive impairment (MCI) and subjective cognitive complaint, patients were classified as patients with cognitive anosognosia (PD-CA, n = 74), with normal cognitive recognition (PD-NR, n = 184) or with cognitive underestimation (PD-CU, n = 82). After controlling for covariates, cognitive performance and neuropsychiatric symptoms were compared between the PD groups.

RESULTS

Cognitive anosognosia was found in 21.8% of patients with de novo PD. The PD-CA group showed poorer performance in all cognitive domains except for attention. Amongst PD patients with MCI, those with cognitive anosognosia showed lower composite z-scores in the Stroop color reading test than those without. The Beck Depression Inventory score in the PD-NR group was lower than that in the PD-CU group and higher than that in the PD-CA group. The Cognitive Complaints Interview score mediated the association between cognitive anosognosia and Beck Depression Inventory score.

CONCLUSIONS

Cognitive anosognosia in PD was associated with greater frontal dysfunction and lower depression. Since cognitive anosognosia has a harmful impact on PD patients and their caregivers due to overestimation of their abilities in everyday life, early identification of cognitive anosognosia in PD is important in management and prognosis.

Surface-Initiated Atom Transfer Polymerized Anionic Corona on Gold Nanoparticles for Anti-Cancer Therapy

Surface initiated atom transfer radical polymerization (SI-ATRP) documented a simple but efficient technique to grow a dense polymer layer on any surface. Gold nanoparticles (AuNPs) give a broad surface to immobilize sulfhyryl group-containing initiators for SI-ATRP; in addition, AuNPs are the major nanoparticulate carriers for delivery of anti-cancer therapeutics, since they are biocompatible and bioinert. In this work, AuNPs with a disulfide initiator were polymerized with sulfoethyl methacrylate by SI-ATRP to decorate the particles with anionic corona, and branched polyethyeleneimine (PEI) and siRNA were sequentially layered onto the anionic corona of AuNP by electrostatic interaction. The in vitro anti-cancer effect confirmed that AuNP with anionic corona showed higher degrees of apoptosis as well as suppression of the oncogene expression in a siRNA dose-dependent manner. The in vivo study of tumor-bearing nude mice revealed that mice treated with c-Myc siRNA-incorporated AuNPs showed dramatically decreased tumor size in comparison to those with free siRNA for 4 weeks. Furthermore, histological examination and gene expression study revealed that the decorated AuNP significantly suppressed c-Myc expression. Thus, we envision that the layer-by-layer assembly on the anionic brushes can be potentially used to incorporate nucleic acids onto metallic particles with high transfection efficiency.

Self-assembled cell sheets composed of mesenchymal stem cells and gelatin nanofibers for the treatment of full-thickness wounds

Gelatin-layered PCL nanofibrils for 3D cell sheet formation were composed with adipocyte-derived stem cells for wound healing.

Surface-decorated nanoparticles clicked into nanoparticle clusters for oligonucleotide encapsulation

Gold nanoparticles (AuNPs) are the predominant and representative metal nano-carriers used for the tumor-targeted delivery of therapeutics because they possess advantages such as biocompatibility, high drug loading efficiency, and enhanced accumulation at tumor sites via the size-dependent enhanced permeability and retention (EPR) effect. In this study, we designed an AuNP functionalized with block polymers comprising polyethylenimine and azide group-functionalized poly(ethyl glycol) for the electrostatic incorporation of cytosine–guanine oligonucleotide (CpG ODN) on the surface. The ODN-incorporated AuNPs were cross-linked to gold nanoparticle clusters (AuNCs) via click chemistry using a matrix metalloproteinase (MMP)-2 cleavable peptide linker modified with alkyne groups at both ends. In the presence of Cu(i), azide groups and alkyne groups spontaneously cyclize to form a triazole ring with high fidelity and efficiency, and therefore allow single AuNPs to stack to larger AuNCs for increased EPR effect-mediated tumor targeting. ¹H-NMR and Fourier transform infrared spectroscopy revealed the successful synthesis of an azide–PEG-grafted branched polyethylenimine, and the size and morphology of AuNPs fabricated by the synthesized polymer were confirmed to be 4.02 ± 0.45 nm by field emission-transmission electron microscopy. Raman spectroscopy characterization demonstrated the introduction of azide groups on the surface of the synthesized AuNPs. Zeta-potential and gel-retardation analysis of CpG-loaded AuNPs indicated complete CpG sequestration by AuNPs when the CpG : AuNP weight ratio was higher than 1 : 2.5. The clustering process of the CpG-loaded AuNPs was monitored and was demonstrated to be dependent on the alkyne linker-to-AuNP ratio. Thus, the clicked AuNC can be tailored as a gene carrier where a high accumulation of therapeutics is required.

AuNPs with bPEI and azide modification are loaded with CpG and self-assembled to AuNCs by click chemistry using an alkyne-terminated MMP-2 cleavable peptide as a linker. The clusters are dissembled by MMP-2 to release CpG in a stimuli-responsive manner.

Electrospining of Nanofibrous Meshes Composed of Hypromellose and Poly(vinyl alcohol) for One-Day Release of Cationic Peptide

Various biocompatible polymers have been developed using electrospun nanofibers for local drug delivery matrices, but many of them are non-FDA-approved polymers or chemicals. Material safety should be considered in biomedical devices, but the effectiveness of electrospun nanofibers is limited with only the approved chemicals. Therefore, we considered the material in FDA-approved polymers and solvents and developed nanofibers using the general additives in the pharmaceutical industry, such as hypromellose, poly(vinyl alcohol) (PVA), and Gellan. The nanofiber, mainly composed of hypromellose and PVA, was applied to a local peptide drug delivery system. Electrostatically complexed Gellan and peptide were loaded in the nanofiber by co-electrospinning. The morphology of the nanofibers with different PVA blending ratios was visualized by scanning electron microscope. The nanofiber composed of only hydrophilic polymers quickly wetted in water and became a transparent gel-like lump. A drug release test of peptide-loaded nanofiber was performed resulted in 37% of initial burst release suppression with the gellan and peptide loaded nanofiber compared with solely peptide loaded hypromellose nanofiber. In addition, higher PVA blending to hypromellose was slightly effective for sustained release of peptide compared with pure peptide-loaded hypromellose nanofiber. Therefore, we suggest the potential application of hypromellose/PVA nanofiber-loaded Gellan/peptide complex to a mucosal layer drug delivery patch.

Michael-Type Addition of Gelatin on Electrospun Nanofibrils for Self-Assembly of Cell Sheets Composed of Human Dermal Fibroblasts

To facilitate cell sheet formation of human dermal fibroblasts, gelatin moieties were chemically decorated onto the surface of electrospun nanofibrils (NFs). Poly(caprolactone) [PCL] was electrospun onto fibrous meshes and then fragmented into nanofibrils by optimized milling and hydrolysis. After aminolysis of the NFs, methacrylated gelatin (GelMA) was reacted via Michael-type addition with the surface-exposed amines of the aminolyzed NFs (ahPCL NFs). GelMA was immobilized on the ahPCL NFs. Analysis of ahPCL NFs and native NFs conducted using X-ray photoelectron spectroscopy confirmed that gelatin was chemically conjugated onto the NFs. Human dermal fibroblasts (HDF) and the decorated NFs were self-assembled into cell sheets, and cells in the matrix showed highly spreading morphology by confocal microscopy. Our results indicate that the degree of cell spreading and cellular viability was much higher in the presence of GelMA immobilized in ahPCL NFs.

Effects of Alzheimer's disease and Lewy body disease on subcortical atrophy

BACKGROUND AND PURPOSE

Subcortical structures are affected by neurodegeneration in Alzheimer's disease (AD) and Lewy body disease (LBD). Although the co-occurrence of AD and LBD pathologies and their possible interaction have been reported, the effect of AD and LBD on subcortical structures remains unknown. The effects of AD and LBD on subcortical atrophy and their relationship with cognitive dysfunction were investigated.

METHODS

The cross-sectional study recruited 42 patients with pure AD related cognitive impairment (ADCI), 30 patients with pure LBD related cognitive impairment (LBCI), 58 patients with mixed ADCI and LBCI, and 29 normal subjects. A general linear model was used to compare subcortical volume and shape amongst the groups, to investigate the independent and interaction effects of ADCI and LBCI on subcortical shape and volume, and to analyze the relationship between subcortical volume and cognitive dysfunction in each group.

RESULTS

Alzheimer's disease related cognitive impairment and LBCI were independently associated with subcortical atrophies in the hippocampus and amygdala and in the hippocampus and putamen respectively, but their interaction effect was not significant. Compared to the control group, the pure LBCI group exhibited additional local atrophies in the amygdala, caudate and thalamus. Subcortical atrophies correlated differently with cognitive dysfunction according to the underlying causes of cognitive dysfunction.

CONCLUSIONS

The patterns of subcortical atrophies and their correlation with cognitive dysfunction differ according to the underlying AD, LBD or concomitant AD and LBD.

Biomaterials and controlled release strategy for epithelial wound healing

The skin and cornea are tissues that provide protective functions. Trauma and other environmental threats often cause injuries, infections and damage to these tissues, where the degree of injury is directly correlated to the recovery time. For example, a superficial skin or corneal wound may recover within days; however, more severe injuries can last up to several months and may leave scarring. Thus, therapeutic strategies have been introduced to enhance the wound healing efficiency and quality. Although the skin and cornea share similar anatomic structures and wound healing process, therapeutic agents and formulations for skin and cornea wound healing differ in accordance with the tissue and wound type. In this review, we describe the anatomy and epithelial wound healing processes of the skin and cornea, and summarize the therapeutic molecules that are beneficial to the respective regeneration process. In addition, biomaterial scaffolds that inherently possess bioactive properties or modified with therapeutic molecules for topical controlled release and enhanced wound healing efficiency are also discussed.

Clinical relevance of amnestic versus non-amnestic mild cognitive impairment subtyping in Parkinson's disease

BACKGROUND AND PURPOSE

To clarify whether subtyping of amnestic and non-amnestic mild cognitive impairment (MCI) is clinically relevant in Parkinson's disease (PD) by analyzing patterns of neuroimaging and longitudinal cognitive changes.

METHODS

We performed comparative analyses of cortical thickness, hippocampal volume, white matter integrity and resting-state functional connectivity between the patients with de-novo PD with amnestic MCI (PD-aMCI) (n = 50) and non-amnestic MCI (PD-naMCI) (n = 50) subtypes. Additionally, we assessed the longitudinal rate of cognitive decline in each cognitive domain over time and the rate of dementia conversion in patients with de-novo PD-aMCI (n = 125) and PD-naMCI (n = 61).

RESULTS

The demographic data showed that scores in memory domains were lower in the PD-aMCI group compared with the PD-naMCI group. There were no significant differences in cortical thickness, hippocampal volume and white matter integrity between the two groups, although the PD-aMCI group exhibited more cortical thinning and hippocampal atrophy relative to the control group. The PD-aMCI group exhibited increased functional connectivity in the left posterior parietal region with the salience network relative to the PD-naMCI group. The longitudinal cognitive assessment demonstrated that patients with PD-aMCI exhibited a more rapid cognitive decline in frontal/executive function than those with PD-naMCI (P = 0.022). In addition, the PD-aMCI group had a higher risk of dementia conversion than the PD-naMCI group.

CONCLUSIONS

This study suggests that the designation of PD-MCI subtypes based on memory function would highlight the heterogeneity of functional correlates as well as the longitudinal cognitive prognosis.

Coaxial Hydro-Nanofibrils for Self-Assembly of Cell Sheets Producing Skin Bilayers

Bilayered cell sheets were fabricated with coaxial hydro-nanofibrils for three-dimensional (3D) cultivation in a biomimetic environment. Polycaprolactone (PCL) was electrospun and hydrolyzed to release fragmented nanofibrils (NF) in an alkaline condition. Methacrylated gelatin (GelMA) was adsorbed and phototethered on the surface of the fibrils to prepare coaxial NF composed of hydrophilic shells and hydrophobic cores. GelMA layers on the NF were characterized by X-ray photoemission spectroscopy, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The GelMA showed higher decoration level on NF compared to that on native gelatin. GelMA-decorated NF significantly enhanced cell proliferation rate and phenotypic expression of human dermal fibroblasts when spontaneous formation of cell sheets was observed for 7 days. HaCaT cells were layered on top of the fibroblast sheets and further cultivated in air-water interfaces to prepare bilayered skin sheets. After 21 days of incubation, the top layers of the bilayered sheets showed higher expression of pan-keratin, and the dermal cells showed higher proliferation in the GelMA-decorated NF.

Silver-Incorporated Nanocellulose Fibers for Antibacterial Hydrogels

A free-standing, antibacterial hydrogel was fabricated using silver-nanoparticle-immobilized cellulose nanofibers (CNFs) and alginate. Surface hydroxyl groups of CNFs were oxidized to carboxylate groups using (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl (TCNF), followed by the treatment with silver nitrate solution for surface adsorption of silver ions. In situ reduction of silver ions to produce silver nanoparticles was performed for the silver-adsorbed CNFs. Electron microscopy, X-ray diffraction, and spectroscopic analysis revealed that higher amounts of silver nanoparticles were immobilized on the surface of TCNF than on the surface of native CNF. Silver-nanoparticle-immobilized TCNF was embedded in alginate gels and silver ions from the matrix were slowly released for 7 days. Silver-nanoparticle-loaded alginate gels showed comparable antibacterial activity to silver-ions-loaded alginate gels, although the former showed a significantly lower cytotoxicity against animal cells. Thus, the antibacterial gels can potentially be applied to various skin surfaces to prevent bacterial infection while minimizing skin damage.

Surface-initiated atom transfer radical polymerization of cationic corona on iron oxide nanoparticles for magnetic sorting of macrophages

Ovalbumin-incorporated antigen carriers were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP) of iron oxide nanoparticles for magnetic sorting of antigen-presenting cells. Iron oxide nanoparticles were surface-decorated with cationic shells by SI-ATRP, and the primary amines on the surface were further tri-methylated. Surface decoration of the nanoparticles was characterized by Fourier transform infrared spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, and transmission electron microscopy with energy-dispersive spectrometry. Ovalbumin-loaded nanoparticles showed higher incorporation in comparison to non-decorated nanoparticles, and the loaded ovalbumin was released faster at low pH than at neutral pH. Ovalbumin-loaded nanoparticles were endocytosed by macrophages, and macrophages with nanoparticles were easily harvested by magnetic separation. Magnetically sorted macrophages showed higher release of cytokines including TNF-α, MIP-1α, and IL-1β than unsorted macrophages. These results suggest that ovalbumin-loaded nanoparticles can potentially increase the efficiency of immune therapy during the antigen-presenting pathway.

Hydro-nanofibrous mesh deep cell penetration: a strategy based on peeling of electrospun coaxial nanofibers

A two-step strategy for coaxial electrospinning and postelectrospinning is an effective method for fabricating superfine nanofibers composed of highly swellable hydrogels. Alginate and poly(ε-caprolactone) [PCL] were coelectrospun via fibrous meshes with a coaxial nozzle; alginate at the core was subsequently cross-linked in calcium chloride solution. The PCL sheath was removed from the meshes by repeated organic-phase washing. The peeling process was monitored by scanning electron microscopy, transmission electron microscopy, and differential scanning calorimetry, and the complete removal of the PCL outer layers was confirmed by the thinning of the fiber volume. The obtained alginate hydronanofiber showed extreme water-swellability and mass erosion depending on the degree of cross-linking. We also measured the nanoscale and macroscale mechanical properties of a single nanofiber and of the whole mesh by atomic force microscopy and rheometry. Quantitative analysis of nanomechanical properties indicated that the hydronanofiber with higher cross-linking density had higher stiffness and Derjaguin-Müller-Toporov modulus. Cells laid on the mesh and the vertical infiltration distance were visualized and quantified by confocal laser scanning microscopy. Cells on the mesh with higher cross-linking density infiltrated deeply to the bottom of the mesh. Thus, hydrogel-like nanofibrous meshes are versatile matrices allowing for deep infiltration of cells throughout the mesh via manipulation of the mechanical properties of the nanofiber.

Atom Transfer Radical Polymerization of Multishelled Cationic Corona for the Systemic Delivery of siRNA

We propose an effective siRNA delivery system by preparing poly(DAMA-HEMA)-multilayered gold nanoparticles using multiple surface-initiated atom transfer radical polymerization processes. The polymeric multilayer structure is characterized by transmission electron microscopy, matrix-associated laser desorption/ionization time-of-flight mass spectrometry, UV-vis spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering, and ζ-potential. The amount of siRNA electrostatically incorporated into the nanoparticle can be tuned by the number of polymeric shells, which in turn influences the cellular uptake and gene silencing effect. In a bioreductive environment, the interlayer disulfide bond breaks to release the siRNA from the degraded polymeric shells. Intravenously injected c-Myc siRNA-incorporated particles accumulate in the tumor site of a murine lung carcinoma model and significantly suppress the tumor growth. Therefore, the combination of a size-tunable AuNP core and an ATRP-functionalized shell offers control and versatility in the effective delivery of siRNA.

Electrospun nanofibrils embedded hydrogel composites for cell cultivation in a biomimetic environment

(A) Schematic morphology of cells in hydrogel with and without NF. (B) Confocal laser scanning microscopic images of cells in hydrogels with and without NF.

Electrospun Nanofibers Surface-modified with Fluorescent Proteins

Electrospun nanofiber surfaces are modified with proteins to control protein release. A mixture of poly(ε-caprolactone) (PCL) and PCL—PEG block copolymers is electrospun to prepare amine-terminated block copolymers. The amount of surface exposed amine groups increases as the blend ratio of block copolymer increases. Cell attachments on the nanofibers change according to the ratio of the block copolymer in the blend; this indicates that the PEG moiety plays a significant role in enhancing and decreasing biocompatibility of nanofibers. Fluorescent proteins are immobilized on the surface of nanofibers by conjugating activated carboxylic groups of the protein to the surface exposed amine groups of nanofibers in an aqueous environment. The number of amine groups increases as the ratio of block copolymers increases. Proteins that are chemically associated with the nanofibers show an attenuated release profile while most of the proteins physically associated with the nanofibers are released in 1 day. These results show that the protein-immobilized nanofibers can be potentially applied to tissue engineering scaffolds and wound healing materials with bioactive protein being slowly released over a long period of time.

Clustering siRNA conjugates for MMP-responsive therapeutics in chronic wounds of diabetic animals

The MMP-responsive breakdown of siRNA clusters was translated to site-specific gene transfection and enhanced wound healing in diabetic ulcers. MMP-2 siRNA was chemically tethered to the end of multi-armed PEG via MMP-cleavable linkers (4PEG-siRNA) and subsequently clustered into submicron particles complexed with LPEI. 4PEG-siRNA was more tightly complexed with LPEI and the associated cluster showed higher resistance against RNase attack, in comparison to naked siRNA. Because the size of the clusters increased depending on the increase in charge ratio of LPEI to siRNA, cellular uptake of the 4PEG-siRNA/LPEI cluster was significantly attenuated due to the huge size of the cluster. However, upon MMP treatment, the cluster dissociated into smaller particles and was efficiently endocytosed by cells. An in vivo fluorescence resonance energy transfer (FRET) study also revealed that the clusters were effectively dissociated in MMP-rich environments of dorsal wounds in diabetic animals. In addition, diabetic ulcers treated with the clusters showed a faster wound closure rate and the recovered tissue expressed a larger amount of cytokeratin along with a lower expression level of MMP-2 compared to the other groups.

Nanoporous Electrospun Fibrous Meshes: Size-Controlled Reverse Micelles Strategy

A simple and efficient method to fabricate size-controlled nanoporous-nanofibrous meshes has been demonstrated by introducing and removing novel size-controllable porogens, reverse micelles, on electrospun polymeric nanofibers. Poly(D,L-lactide) and reverse micelles composed of amphiphilic diblock copolymer, poly(ethylene glycol) methyl ether-block-poly(ε-caprolactone), were first dissolved in an acetone/chloroform (3:1, v/v) mixture and then electrospun into nanofibers, followed by 70% EtOH post-treatment. During the post-treatment, the reverse micelles were dissolved in 70% EtOH at room temperature thus separated from the poly(D,L-lactide) nanofibers backbone, resulting in a nanoporous nanofibrous structure. The pores on the nanofibers are size-controllable because the sizes of the reverse micelles can be adjusted by varying the water content inside them. The sizes of reverse micelles, which ranged from 100 nm to 700 nm, are investigated by dynamic light scattering. The pores of various sizes on the poly(D,L-lactide) nanofibers have areas ranging from 20 μm2 to 80 μm2 were observed by field-emission scanning electron microscopy.

Electrospinning strategies of drug-incorporated nanofibrous mats for wound recovery

Electrospun nanofibrous mats have recently been employed as drug reservoirs for their unique features, such as high surface-to-volume ratios and easy fabrication process. We describe herein various methods of fabricating drug- and gene-encapsulated nanofibrous meshes, which can be prepared by electrospinning. The electrospinning process of nanofibrous mats is affected by many parameters, including viscosity and ejection speeds of the polymeric solutions and the electrical potential applied to the system. Both single- and dual-nozzle systems are widely employed in the preparation of electrospun nanofibers encapsulating drugs and genes, which are usually incorporated into the electrospun mats either by physical mixing with polymeric solutions before electrospinning or by physical incorporation after electrospinning. Various strategies have been tailored to maintain the bioactivity of proteins for tissue regeneration before and after electrospinning. Nucleic acids, such as DNA and siRNA, are also incorporated into nanofibrous meshes to enhance tissue regeneration by expressing transgenes or silencing domestic genes in specific tissues. Drug- or gene-incorporated nanofibrous meshes can greatly increase tissue regeneration rates and reduce scar formation in normal and diabetic wounds. Hybrid nanofibers, with multiple cell layers or hydrogels, have also been used to improve wound healing efficiency by increasing cell infiltration.

Layer-by-layer surface decoration of electrospun nanofibrous meshes for air–liquid interface cultivation of epidermal cells

PEG multilayered nanofibrous mat for air–liquid interface cell cultivation.

Multilayered electrospun fibrous meshes for restenosis-suppressing metallic stents

Nanofiber is a flexible and highly porous mesh that is advantageous for coating bare metal stent and local drug delivery. Herein, we developed drug-eluting stent coated with PCL/PU blending coaxial nanofiber for controlling drug release manner and suppressing in-stent restenosis, which is a representative side effect of stenting surgery. The shell of coaxial electrospun nanofibrous are composed of poly (ε-caprolactone) (PCL) and polyurethane (PU) for biodegradability and elasticity to the polymeric coating of stent. Paclitaxel (PTX) is loaded into both the core and shell through electrospinning using coaxial nozzle with different weight ratio. The morphology of nanofiber-coated stent, expansion state, and core/shell structure of nanofiber were visualized by scanning electron microscope and transmission electron microscope. As more amount of PCL/PU was infused from the outer nozzle, PTX release speed from the nanofiber was increased. And PTX suppressed L6 cell proliferation in vitro expecting potential possibility of PTX-loaded coaxial nanofiber as a drug-eluting stent coating material. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 628-635, 2017.