Z-scheme WO3/PANI heterojunctions with enhanced photocatalytic activity under visible light: A depth experimental and DFT studies

A WO₃@PANI heterojunction photocatalyst with a various mass ratio of polyaniline to WO₃ was obtained via the in situ oxidative deposition polymerization of aniline monomer in the presence of WO₃ powder. The characterization of WO₃@PANI composites was carried via X-ray diffraction (XRD), scanning electron microscopy (SEM-EDS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible diffuse reflection spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and photoluminescence spectroscopy (PL). The photocatalytic efficiency of WO₃@PANI photocatalysts was assessed by following the decomposition of the Rhodamine B (RhB) dye under visible light irradiation (λ >420 nm). The results evidenced the high efficiency of the WO₃@PANI (0.5 wt %) nanocomposite in the photocatalytic degradation of RhB (90% within 120 min) under visible light irradiation 3.6 times compared to pure WO₃. The synergistic effect between PANI and WO₃ is the reason for the increased photogenerated carrier separation. The superior photocatalytic performance of the WO₃@PANI catalyst was ascribed to the increased visible light in the visible range and the efficient charge carrier separation. Furthermore, the Density Functional Theory study (DFT) of WO₃@PANI was performed at the molecular level, to find its internal nature for the tuning of photocatalytic efficiency. The DFT results indicated that the chemical bonds connected the solid-solid contact interfaces between WO₃ and PANI. Finally, a plausible photocatalytic mechanism of WO₃@PANI (0.5 wt %) performance under visible light illumination is suggested to guide additional photocatalytic activity development.

Polyaniline coated tungsten trioxide as an effective adsorbent for the removal of orange G dye from aqueous media

In this work, the core–shell PANI@WO₃ composite was obtained from the reaction of aniline monomer polymerization with WO₃ particles; sodium persulfate was used as an oxidant. Various analytical techniques such as scanning electron microscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), and X-ray photoelectron spectroscopy (XPS) were used to characterize the as-prepared PANI@WO₃ adsorbent, which well confirmed that the WO₃ particles were coated by polyaniline polymer. The PANI@WO₃ composite was tested as an adsorbent to remove reactive orange G (OG) for the first time. pH, adsorbent dose, contact time, initial dye concentration, and temperature were systematically investigated in order to study their effect on the adsorption process. The experimental findings showed that the PANI@WO₃ composite has considerable potential to remove an aqueous OG dye. Langmuir and Freundlich's models were used to analyze the equilibrium isotherms of OG dye adsorption on the PANI@WO₃ composite. As a result, the best correlation of the experimental data was provided by the Langmuir model, and the maximum capacity of adsorption was 226.50 mg g⁻¹. From a thermodynamic point of view, the OG dye adsorption process occurred spontaneously and endothermically. Importantly, PANI@WO₃ still exhibited an excellent adsorption capability after four regeneration cycles, indicating the potential reusability of the PANI@WO₃ composite. These results indicate that the as prepared PANI@WO₃ composite could be employed as an efficient adsorbent and was much better than the parent material adsorption of OG dye.

In this work, the core–shell PANI@WO₃ composite was obtained from the reaction of aniline monomer polymerization with WO₃ particles; sodium persulfate was used as an oxidant.

Influence of Water on the Oxidation of NO on Pd/TiO2 Photocatalysts

Two series of new photocatalysts were synthesized based on modification with Pd of the commercial P25 photocatalyst (EVONIK^®). Two techniques were employed to incorporate Pd nanoparticles on the P25 surface: photodeposition (series Pd-P) and impregnation (series Pd-I). Both series were characterized in depth using a variety of instrumental techniques: BET, DRS, XRD, XPS, TEM, FTIR and FESEM. The modified series exhibited a significant change in pore size distribution, but no differences compared to the original P25 with respect to crystalline phase ratio or particle size were observed. The Pd⁰ oxidation state was predominant in the Pd-P series, while the presence of the Pd²⁺ oxidation state was additionally observed in the Pd-I series. The photoactivity tests were performed in a continuous photoreactor with the photocatalysts deposited, by dip-coating, on borosilicate glass plates. A total of 500 ppb of NO was used as input flow at a volumetric flow rate of 1.2 L·min⁻¹, and different relative humidities from 0 to 65% were tested. The results obtained show that under UV-vis or Vis radiation, the presence of Pd nanoparticles favors NO removal independently of the Pd incorporation method employed and independently of the tested relative humidity conditions. This improvement seems to be related to the different interaction of the water with the surface of the photocatalysts in the presence or absence of Pd. It was found in the catalyst without Pd that disproportionation of NO₂ is favored through its reaction with water, with faster surface saturation. In contrast, in the catalysts with Pd, disproportionation took place through nitro-chelates and adsorbed NO₂ formed from the photocatalytic oxidation of the NO. This different mechanism explains the greater efficiency in NO_x removal in the catalysts with Pd. Comparing the two series of catalysts with Pd, Pd-P and Pd-I, greater activity of the Pd-P series was observed under both UV-vis and Vis radiation. It was shown that the Pd⁰ oxidation state is responsible for this greater activity as the Pd-I series improves its activity in successive cycles due to a reduction in Pd²⁺ species during the photoactivity tests.

Facile synthesis and characterization of a novel 1,2,4,5-benzene tetracarboxylic acid doped polyaniline@zinc phosphate nanocomposite for highly efficient removal of hazardous hexavalent chromium ions from water

The present study describes the preparation of a novel 1,2,4,5-benzene tetracarboxylic acid doped polyaniline@zinc phosphate (BTCA-PANI@ZnP) nanocomposite via a facile two-step procedure. Thereafter, the as-prepared composite material adsorption characteristics for Cr(VI) ions removal were evaluated under batch adsorption. Kinetic approach studies for Cr(VI) removal, clearly demonstrated that the results of the adsorption process followed the pseudo second order and Langmuir models. The thermodynamic study indicated a spontaneous and endothermic process. Furthermore, higher monolayer adsorption was determined to be 933.88 mg g^-1. In addition, the capability study regarding Cr(VI) ions adsorption over BTCA-PANI@ZnP nanocomposite clearly revealed that our method is suitable for large scale application. X-ray photoelectron spectroscopy (XPS) analysis confirmed Cr(VI) adsorption on the BTCA-PANI@ZnP surface, followed by its subsequent reduction to Cr(III). Thus, the occurrence of external mass transfer, electrostatic attraction and reduction phenomenon were considered as main mechanistic pathways of Cr(VI) ions removal. The superior adsorption performance of the material, the multi-dimensional characteristics of the surface and the involvement of multiple removal mechanisms clearly demonstrated the potential applicability of the BTCA-PANI@ZnP material as an effective alternative for the removal of Cr(VI) ions from wastewater.

Recent progress on the enhancement of photocatalytic properties of BiPO4 using π-conjugated materials

Semiconductor photocatalysis is regarded as most privileged solution for energy conversion and environmental application. Recently, photocatalysis methods using bismuth-based photocatalysts, such as BiPO₄, have been extensively investigated owing to their superior efficacy regarding organic pollutant degradation and their further mineralization into CO₂ and H₂O. It is well known that BiPO₄ monoclinic phase exhibited better photocatalytic performance compared to Degussa (Evonik) P25 TiO₂ in term of ultraviolet light driven organic pollutants degradation. However, its wide band gap, poor adsorptive performance and large size make BiPO₄ less active under visible light irradiation. However, extensive research works have been conducted in the past with the aim of improving visible light driven BiPO₄ activity by constructing a series of heterostructures, mainly coupled with π-conjugated architecture (e.g., conductive polymer, dye sensitization and carbonaceous materials). However, a critical review of modified BiPO₄ systems using π-conjugated materials has not been published to date. Therefore, this current review article was designed with the aim of presenting a brief current state-of-the-art towards synthesis methods of BiPO₄ in the first section, with an especial focuses onto its crystal-microstructure, optical and photocatalytic properties. Moreover, the most relevant strategies that have been employed to improve its photocatalytic activities are then addressed as the main part of this review. Finally, the last section presents ongoing challenges and perspectives for modified BiPO₄ systems using π-conjugated materials.

Photocatalytic reduction of CO2 over platinised Bi2WO6-based materials

Bi₂WO₆ and Bi₂WO₆–TiO₂ were synthesized, platinised and evaluated in the photocatalytic reduction of CO₂. The methane yield was greatly improved by platinisation and TiO₂ addition. Blue phosphors enhanced the system stability.

Novel Bi(2)WO(6)-TiO(2) heterostructures for Rhodamine B degradation under sunlike irradiation

Highly efficient Bi(2)WO(6)-TiO(2) heterostructure is synthesized by means of a hydrothermal method having highly photoactivity for the degradation of Rhodamine B under sunlike irradiation. From the structural characterization it has been demonstrated that TiO(2) is incorporated on the Aurivillius structure. Interesting synergetic effect between TiO(2) and Bi(2)WO(6) leads to an improved charge carrier separation mechanism, causing the excellent photocatalytic performance under sunlike irradiation. The photocatalytic performance of Bi(2)WO(6) and Bi(2)WO(6)-TiO(2) was compared under different irradiation conditions and using increasing Rhodamine B concentration up to 25 ppm. After the photocatalytic analysis of both systems, the mineralization efficiency of the heterostructure appears significantly higher with respect to Bi(2)WO(6).

Oxidation of 6- and 8-methylquinolines upon UV-illumination in the presence of a powder of TiO2 photocatalyst

Selective transformation of the methyl group into a formyl group in methylquinolines is of great interest because formation of the corresponding aldehydes is either very expensive or unknown. We report here results concerning the photo-oxidation of 6- and 8-methylquinolines (6-MQ and 8-MQ) suspended with TiO2 powder in oxygenated acetonitrile. The analytical study of the products generated from the TiO2-photoassisted oxidation of 6-MQ and 8-MQ in oxygenated acetonitrile suspensions indicated that in both cases, for a UV-illumination period of < 24 h, the corresponding formyl derivatives quinoline-6- and -8-carbaldehydes are detected as practically the sole products. Analysis of further photogenerated oxidation products enabled mechanistic delineation of the course of the semiconductor-mediated reaction.