Naturally occurring radioactivity in some Swedish concretes and their constituents - Assessment by using I-index and dose-model

The reference level for effective dose due to gamma radiation from building materials and construction products used for dwellings is set to 1 mSv per year (EC, 1996, 1999), (CE, 2014). Given the specific conditions presented by the EC in report 112 (1999) considering building and construction materials, an I-index of 1 may generate an effective dose of 1 mSv per year. This paper presents a comparison of the activity concentrations of (4)(0)K, (226)Ra and (232)Th of aggregates and when these aggregates constitute a part of concrete. The activity concentration assessment tool for building and construction materials, the I-index, introduced by the EC in 1996, is used in the comparison. A comparison of the I-indices values are also made with a recently presented dose model by Hoffman (2014), where density variations of the construction material and thickness of the construction walls within the building are considered. There was a ∼16-19% lower activity index in concretes than in the corresponding aggregates. The model by Hoffman further implies that the differences between the I-indices of aggregates and the concretes' final effective doses are even larger. The difference is due, mainly to a dilution effect of the added cement with low levels of natural radioisotopes, but also to a different and slightly higher subtracted background value (terrestrial value) used in the modeled calculation of the revised I-index by Hoffman (2014). Only very minimal contributions to the annual dose could be related to the water and additives used, due to their very low content of radionuclides reported.

Exploration of the two-photon excitation spectrum of fluorescent dyes at wavelengths below the range of the Ti:Sapphire laser

We have studied the wavelength dependence of the two-photon excitation efficiency for a number of common UV excitable fluorescent dyes; the nuclear stains DAPI, Hoechst and SYTOX Green, chitin- and cellulose-staining dye Calcofluor White and Alexa Fluor 350, in the visible and near-infrared wavelength range (540-800 nm). For several of the dyes, we observe a substantial increase in the fluorescence emission intensity for shorter excitation wavelengths than the 680 nm which is the shortest wavelength usually available for two-photon microscopy. We also find that although the rate of photo-bleaching increases at shorter wavelengths, it is still possible to acquire many images with higher fluorescence intensity. This is particularly useful for applications where the aim is to image the structure, rather than monitoring changes in emission intensity over extended periods of time. We measure the excitation spectrum when the dyes are used to stain biological specimens to get a more accurate representation of the spectrum of the dye in a cell environment as compared to solution-based measurements.

A simple but precise method for quantitative measurement of the quality of the laser focus in a scanning optical microscope

We report a method for characterizing the focussing laser beam exiting the objective in a laser scanning microscope. This method provides the size of the optical focus, the divergence of the beam, the ellipticity and the astigmatism. We use a microscopic‐scale knife edge in the form of a simple transmission electron microscopy grid attached to a glass microscope slide, and a light‐collecting optical fibre and photodiode underneath the specimen. By scanning the laser spot from a reflective to a transmitting part of the grid, a beam profile in the form of an error function can be obtained and by repeating this with the knife edge at different axial positions relative to the beam waist, the divergence and astigmatism of the postobjective laser beam can be obtained. The measured divergence can be used to quantify how much of the full numerical aperture of the lens is used in practice. We present data of the beam radius, beam divergence, ellipticity and astigmatism obtained with low (0.15, 0.7) and high (1.3) numerical aperture lenses and lasers commonly used in confocal and multiphoton laser scanning microscopy. Our knife‐edge method has several advantages over alternative knife‐edge methods used in microscopy including that the knife edge is easy to prepare, that the beam can be characterized also directly under a cover slip, as necessary to reduce spherical aberrations for objectives designed to be used with a cover slip, and it is suitable for use with commercial laser scanning microscopes where access to the laser beam can be limited.

Balanced detection for interferometry with a noisy source

Optical properties of nanostructures depend on size, shape, material, and local environment. These characteristics can be probed interferometrically, given a broadband source. However, broadband supercontinuum sources are intrinsically noisy, limiting the measurement sensitivity. In this article we describe the application of an auto-balancing technique to reduce the noise in a broadband supercontinuum source, thus increasing the signal to noise ratio. We show a noise reduction of 41 dB allowing optical powers as small as 0.01 pW to be interferometrically detected with a 5 ms integration time.

Precursor evaluation for in situ InP nanowire doping

The use of tetraethyltin (TESn) and dimethylzinc (DMZn) as in situ n- and p-dopant precursors during particle-assisted growth of InP nanowires is reported. Gate voltage dependent transport measurements demonstrate that the nanowires can be predictably synthesized as either n- or p-type. These doped nanowires can be characterized based on their electric field response and we find that n-type doping scales over a range from 10(17) to 10(19) cm(-3) with increasing input TESn dopant molar fraction. On the other hand, the p-type doping using DMZn saturates at low levels, probably related to a strong increase in nanowire growth rate with increasing DMZn molar fractions. By optimizing growth conditions with respect to tapering, axial pn-junctions exhibiting rectifying behavior were fabricated. The pn-junctions can be operated as light emitting diodes.

Infrared photodetectors in heterostructure nanowires

We report on spectrally resolved photocurrent measurements on single self-assembled nanowire heterostructures. The wires, typically 3 microm long with an average diameter of 85 nm, consist of InAs with a 1 microm central part of InAsP. Two different sets of wires were prepared with phosphorus contents of 15+/-3% and 35+/-3%, respectively, as determined by energy-dispersive spectroscopy measurements made in transmission electron microscopy. Ohmic contacts are fabricated to the InAs ends of the wire using e-beam lithography. The conduction band offset between the InAs and InAsP regions virtually removes the dark current through the wires at low temperature. In the optical experiments, interband excitation in the phosphorus-rich part of the wires results in a photocurrent with threshold energies of about 0.65 and 0.82 eV, respectively, in qualitative agreement with the expected band gap of the two compositions. Furthermore, a strong polarization dependence is observed with an order of magnitude larger photocurrent for light polarized parallel to the wire than for light polarized perpendicular to the wire. We believe that these wires form promising candidates as nanoscale infrared polarization-sensitive photodetectors.