Elimination of Interface Energy Barriers Using Dendrimer Polyelectrolytes with Fractal Geometry

In this work we study conjugated polyelectrolyte (CPE) films based on polyamidoamine (PAMAM) dendrimers of generations G1 and G3. These fractal macromolecules are compared to branched polyethylenimine (b-PEI) polymer using methanol as the solvent. All of these materials present a high density of amino groups, which protonated by methoxide counter-anions create strong dipolar interfaces. The vacuum level shift associated to these films on n-type silicon was 0.93 eV for b-PEI, 0.72 eV for PAMAM G1 and 1.07 eV for PAMAM G3. These surface potentials were enough to overcome Fermi level pinning, which is a typical limitation of aluminium contacts on n-type silicon. A specific contact resistance as low as 20 mΩ·cm2 was achieved with PAMAM G3, in agreement with the higher surface potential of this material. Good electron transport properties were also obtained for the other materials. Proof-of-concept silicon solar cells combining vanadium oxide as a hole-selective contact with these new electron transport layers have been fabricated and compared. The solar cell with PAMAM G3 surpassed 15% conversion efficiency with an overall increase of all the photovoltaic parameters. The performance of these devices correlates with compositional and nanostructural studies of the different CPE films. Particularly, a figure-of-merit (Vσ) for CPE films that considers the number of protonated amino groups per macromolecule has been introduced. The fractal geometry of dendrimers leads to a geometric increase in the number of amino groups per generation. Thus, investigation of dendrimer macromolecules seems a very good strategy to design CPE films with enhanced charge-carrier selectivity.

Deposition of Polysilicon Films by Hot-Wire CVD at Low Temperatures for Photovoltaic Applications

Polysilicon (poly-Si) thin films have been obtained using hot-wire chemical vapor deposition (HWCVD) from silane-hydrogen mixtures. The films were prepared at low substrate temperatures (down to 200°C) and at very high deposition rates (up to 40 Å/s). They showed good crystalline properties and no amorphous phases were detected. The films can also be efficiently doped by adding diborane or phosphine to gas phase. In this paper, an overview of the properties of the poly-Si films, intrinsic and p and n-doped, deposited at our laboratory by HWCVD is presented and discussed. The properties of the material and the features of the deposition technique which are interesting for their application in photovoltaics are emphasized.

Characterization of a-SiCx:H Films for c-Si Surface Passivation

Amorphous intrinsic silicon carbide (a-SiCx:H(i)) films and amorphous phophorous doped silicon carbide (a-SiCx:H(n)) films deposited by plasma enhanced chemical vapor deposition (PECVD) from silane/methane mixtures provide excellent electronic passivation of p-type c-Si. Effective surface recombination velocities (Seff) lower than 23 cm s-1 have been reported for a- SiCx:H(i) films and Seff < 11 cm s-1 for a-SiCx:H(n) films. The analysis of the dependence of Seff on the injection level indicates that the good electronic passivation is due to field-effect passivation resulting from a high fixed charge (Qf) created in the a-SiCx:H film. In this work the absorption of SiH bonds in infrared transmission spectra of a-SiCx:H films is quantitatively analysed resulting in about 30% smaller amount of SiH bonds in phosphorous doped films compared to intrinsic films. Furthermore, a strong reciprocal correlation of the hydrogen content in the films and the Qf created at the a-SiCx:H/c-Si interface is observed.