Nanoimprinted multifunctional nanoprobes for a homogeneous immunoassay in a top-down fabrication approach

Multifunctional nanoparticles are discussed as versatile probes for homogeneous immunoassays for in-vitro diagnostics. Top-down fabrication allows to combine and tailor magnetic and plasmonic anisotropic properties. The combination of nanoimprint lithography, thin film deposition, and lift-off processing provides a top-down fabrication platform, which is both flexible and reliable. Here, we discuss the material compositions and geometrical designs of monodisperse multicomponent nanoparticles and their consequences on optical and magnetic properties. The rotational hydrodynamics of nanoparticles is measured and considered under the influence of magnetic shape anisotropy in the framework of the Stoner-Wohlfarth theory. The plasmon-optical properties are explained by discrete-dipole finite-element simulations. Rotational dynamical measurements of imprinted nanoprobes for two test proteins demonstrate the applicability as highly sensitive biomolecular nanoprobes.

Multifunctional Nanostructures and Nanopocket Particles Fabricated by Nanoimprint Lithography

Nanostructured surfaces and nanoparticles are already widely employed in many different fields of research, and there is an ever-growing demand for reliable, reproducible and scalable nanofabrication methods. This is especially valid for multifunctional nanomaterials with physical properties that are tailored for specific applications. Here, we report on the fabrication of two types of nanomaterials. Specifically, we present surfaces comprising a highly uniform array of elliptical pillars as well as nanoparticles with the shape of nanopockets, possessing nano-cavities. The structures are fabricated by nanoimprint lithography, physical and wet-chemical etching and sputter deposition of thin films of various materials to achieve a multifunctional nanomaterial with defined optical and magnetic properties. We show that the nanopockets can be transferred to solution, yielding a nanoparticle dispersion. All fabrication steps are carefully characterized by microscopic and optical methods. Additionally, we show optical simulation results that are in good agreement with the experimentally obtained data. Thus, this versatile method allows to fabricate nanomaterials with specific tailor-made physical properties that can be designed by modelling prior to the actual fabrication process. Finally, we discuss possible application areas of these nanomaterials, which range from biology and medicine to electronics, photovoltaics and photocatalysis.

Integrated silicon nitride organic hybrid DFB laser with inkjet printed gain medium

The provision of a coherent light source is a prerequisite for a variety of photonic integrated circuits. The integration of semiconductor laser diodes in disposable photonic devices in fields such as biosensing is, however, impeded by the competitive pricing in this application area. In this work, we demonstrate lasing of an alternative laser light source, namely an integrated hybrid organic solid-state distributed feedback laser for a silicon nitride photonic platform. The laser is optically pumped with a high power 450 nm laser diode and emits in the visible at 630 nm into a waveguide taper to reduce the cross-section to a single mode geometry. Inkjet printing of the organic gain medium enables a local, cost-effective, and flexible processing technology. The fabrication of the presented coherent light source is CMOS compatible and therefore highly interesting for co-integrated sensing platforms.

Applications, Surface Modification and Functionalization of Nickel Nanorods

The growing number of nanoparticle applications in science and industry is leading to increasingly complex nanostructures that fulfill certain tasks in a specific environment. Nickel nanorods already possess promising properties due to their magnetic behavior and their elongated shape. The relevance of this kind of nanorod in a complex measurement setting can be further improved by suitable surface modification and functionalization procedures, so that customized nanostructures for a specific application become available. In this review, we focus on nickel nanorods that are synthesized by electrodeposition into porous templates, as this is the most common type of nickel nanorod fabrication method. Moreover, it is a facile synthesis approach that can be easily established in a laboratory environment. Firstly, we will discuss possible applications of nickel nanorods ranging from data storage to catalysis, biosensing and cancer treatment. Secondly, we will focus on nickel nanorod surface modification strategies, which represent a crucial step for the successful application of nanorods in all medical and biological settings. Here, the immobilization of antibodies or peptides onto the nanorod surface adds another functionality in order to yield highly promising nanostructures.

Next-Generation Magnetic Nanocomposites: Cytotoxic and Genotoxic Effects of Coated and Uncoated Ferric Cobalt Boron (FeCoB) Nanoparticles In Vitro

Metal nanoparticles (NPs) have unique physicochemical properties and a widespread application scope depending on their composition and surface characteristics. Potential biomedical applications and the growing diversity of novel nanocomposites highlight the need for toxicological hazard assessment of next-generation magnetic nanomaterials. Our study aimed to evaluate the cytotoxic and genotoxic properties of coated and uncoated ferric cobalt boron (FeCoB) NPs (5-15 nm particle size) in cultured normal human dermal fibroblasts. Cell proliferation was assessed via ATP bioluminescence kit, and DNA breakage and chromosomal damage were measured by alkaline comet assay and micronucleus test. Polyacryl acid-coated FeCoB NPs [polyacrylic acid (PAA)-FeCoB NPs) and uncoated FeCoB NPs inhibited cell proliferation at 10 μg/ml. DNA strand breaks were significantly increased by PAA-coated FeCoB NPs, uncoated FeCoB NPs and l-cysteine-coated FeCoB NPs (Cys-FeCoB NPs), although high concentrations (10 μg/ml) of coated NPs (Cys- and PAA-FeCoB NPs) showed significantly more DNA breakage when compared to uncoated ones. Uncoated FeCoB NPs and coated NPs (PAA-FeCoB NPs) also induced the formation of micronuclei. Additionally, PAA-coated NPs and uncoated FeCoB NPs showed a negative correlation between cell proliferation and DNA strand breaks, suggesting a common pathomechanism, possibly by oxidation-induced DNA damage. We conclude that uncoated FeCoB NPs are cytotoxic and genotoxic at in vitro conditions. Surface coating of FeCoB NPs with Cys and PAA does not prevent but rather aggravates DNA damage. Further safety assessment and a well-considered choice of surface coating are needed prior to application of FeCoB nanocomposites in biomedicine.

Homogeneous Biosensing Based on Magnetic Particle Labels

The growing availability of biomarker panels for molecular diagnostics is leading to an increasing need for fast and sensitive biosensing technologies that are applicable to point-of-care testing. In that regard, homogeneous measurement principles are especially relevant as they usually do not require extensive sample preparation procedures, thus reducing the total analysis time and maximizing ease-of-use. In this review, we focus on homogeneous biosensors for the in vitro detection of biomarkers. Within this broad range of biosensors, we concentrate on methods that apply magnetic particle labels. The advantage of such methods lies in the added possibility to manipulate the particle labels by applied magnetic fields, which can be exploited, for example, to decrease incubation times or to enhance the signal-to-noise-ratio of the measurement signal by applying frequency-selective detection. In our review, we discriminate the corresponding methods based on the nature of the acquired measurement signal, which can either be based on magnetic or optical detection. The underlying measurement principles of the different techniques are discussed, and biosensing examples for all techniques are reported, thereby demonstrating the broad applicability of homogeneous in vitro biosensing based on magnetic particle label actuation.

Homogeneous Protein Analysis by Magnetic Core-Shell Nanorod Probes

Studying protein interactions is of vital importance both to fundamental biology research and to medical applications. Here, we report on the experimental proof of a universally applicable label-free homogeneous platform for rapid protein analysis. It is based on optically detecting changes in the rotational dynamics of magnetically agitated core-shell nanorods upon their specific interaction with proteins. By adjusting the excitation frequency, we are able to optimize the measurement signal for each analyte protein size. In addition, due to the locking of the optical signal to the magnetic excitation frequency, background signals are suppressed, thus allowing exclusive studies of processes at the nanoprobe surface only. We study target proteins (soluble domain of the human epidermal growth factor receptor 2 - sHER2) specifically binding to antibodies (trastuzumab) immobilized on the surface of our nanoprobes and demonstrate direct deduction of their respective sizes. Additionally, we examine the dependence of our measurement signal on the concentration of the analyte protein, and deduce a minimally detectable sHER2 concentration of 440 pM. For our homogeneous measurement platform, good dispersion stability of the applied nanoprobes under physiological conditions is of vital importance. To that end, we support our measurement data by theoretical modeling of the total particle-particle interaction energies. The successful implementation of our platform offers scope for applications in biomarker-based diagnostics as well as for answering basic biology questions.

Air- and water-resistant noble metal coated ferromagnetic cobalt nanorods

Cobalt nanorods possess ideal magnetic properties for applications requiring magnetically hard nanoparticles. However, their exploitation is undermined by their sensitivity toward oxygen and water, which deteriorates their magnetic properties. The development of a continuous metal shell inert to oxidation could render them stable, opening perspectives not only for already identified applications but also for uses in which contact with air and/or aqueous media is inevitable. However, the direct growth of a conformal noble metal shell on magnetic metals is a challenge. Here, we show that prior treatment of Co nanorods with a tin coordination compound is the crucial step that enables the subsequent growth of a continuous noble metal shell on their surface, rendering them air- and water-resistant, while conserving the monocrystallity, metallicity and the magnetic properties of the Co core. Thus, the as-synthesized core-shell ferromagnetic nanorods combine high magnetization and strong uniaxial magnetic anisotropy, even after exposure to air and water, and hold promise for successful implementation in in vitro biodiagnostics requiring probes of high magnetization and anisotropic shape.

Direct protein detection in the sample solution by monitoring rotational dynamics of nickel nanorods

The feasibility of a recently introduced homogeneous immunodiagnostic approach to directly detect analyte binding by optical observation of the hydrodynamic properties of magnetically rotated nanorods ("PlasMag") is demonstrated experimentally. Specifically, it is shown that the phase lag of the long axis of nickel nanorods (magnetic core parameters: length 182 nm, diameter 26 nm) with respect to externally applied rotating magnetic fields significantly increases on the adhesion of bovine serum albumin (BSA) protein to their surfaces. To validate these results, the amount of bound protein molecules is independently determined by analysis of the electrophoretic mobility of the nanorods. Furthermore, the data also demonstrate the applicability of recently developed empirical models based on numerical solutions of the Fokker-Planck equation for describing the dynamics of magnetic nanoparticles in rotating magnetic fields.

Contemporaneous cell spreading and phagocytosis: magneto-resistive real-time monitoring of membrane competing processes

Adhesion and spreading of cells strongly depend on the properties of the underlying surface, which has significant consequences in long-term cell behavior adaption. This relationship is important for the understanding of both biological functions and their bioactivity in disease-related applications. Employing our magnetic lab-on-a-chip system, we present magnetoresistive-based real-time and label-free detection of cellular phagocytosis behavior during their spreading process on particle-immobilized sensor surfaces. Cell spreading experiments carried out on particle-free and particle-modified surfaces reveal a delay in spreading rate after an elapsed time of about 2.2h for particle-modified surfaces due to contemporaneous cell membrane loss by particle phagocytosis. Our associated magnetoresistive measurements show a high uptake rate at early stages of cell spreading, which decreases steadily until it reaches saturation after an average elapsed time of about 100 min. The corresponding cellular average uptake rate during the entire cell spreading process accounts for three particles per minute. This result represents a four times higher phagocytosis efficiency compared to uptake experiments carried out for confluently grown cells, in which case cell spreading is already finished and, thus, excluded. Furthermore, other dynamic cell-surface interactions at nano-scale level such as cell migration or the dynamics of cell attachment and detachment are also addressable by our magnetic lab-on-a-chip approach.

Magnetoresistive-based real-time cell phagocytosis monitoring

The uptake of large particles by cells (phagocytosis) is an important factor in cell biology and also plays a major role in biomedical applications. So far, most methods for determining the phagocytic properties rely on cell-culture incubation and end-point detection schemes. Here, we present a lab-on-a-chip system for real-time monitoring of magnetic particle uptake by human fibroblast (NHDF) cells. It is based on recording the time evolution of the average position and distribution of magnetic particles during phagocytosis by giant-magnetoresistive (GMR) type sensors. We employ particles with a mean diameter of 1.2 μm and characterize their phagocytosis-relevant properties. Our experiments at physiological conditions reveal a cellular uptake rate of 45 particles per hour and show that phagocytosis reaches saturation after an average uptake time of 27.7h. Moreover, reference phagocytosis experiments at 4°C are carried out to mimic environmental or disease related inhibition of the phagocytic behavior, and our measurements clearly show that we are able to distinguish between cell-membrane adherent and phagocytosed magnetic particles. Besides the demonstrated real-time monitoring of phagocytosis mechanisms, additional nano-biointerface studies can be realized, including on-chip cell adhesion/spreading as well as cell migration, attachment and detachment dynamics. This versatility shows the potential of our approach for providing a multifunctional platform for on-chip cell analysis.

Modeling and development of a biosensor based on optical relaxation measurements of hybrid nanoparticles

We present a new approach for homogeneous real-time immunodiagnostics (denoted as "PlasMag") that can be directly carried out in sample solutions such as serum, thus promising to circumvent the need of sample preparation. It relies on highly sensitive plasmon-optical detection of the relaxation dynamics of magnetic nanoparticles immersed in the sample solution, which changes when target molecules bind to the surfaces of the nanoparticles due to the increase in their hydrodynamic radii. This method requires hybrid nanoparticles that combine both magnetic and optical anisotropic properties. Our model calculations show that core-shell nanorods with a cobalt core diameter of 6 nm, a cobalt core length of 80 nm, and a gold shell thickness of 5 nm are ideally suited as nanoprobes. On the one hand, the spectral position of the longitudinal plasmon resonance of such nanoprobes lies in the near-infrared, where the optical absorption in serum is minimal. On the other hand, the expected change in their relaxation properties on analyte binding is maximal for rotating magnetic fields as excitation in the lower kHz regime. In order to achieve high alignment ratios of the nanoprobes, the strength of the magnetic field should be around 5 mT. While realistic distributions of the nanoprobe properties result in a decrease of their mean optical extinction, the actual relaxation signal change on analyte binding is largely unaffected. These model calculations are supported by measurements on plain cobalt nanorod dispersions, which are the base component of the aspired core-shell nanoprobes currently under development.

Artificial cilia of magnetically tagged polymer nanowires for biomimetic mechanosensing

Polymeric nanowires of polypyrrole have been implemented as artificial cilia on giant-magneto-resistive multilayer sensors for a biomimetic sensing approach. The arrays were tagged with a magnetic material, the stray field of which changes relative to the underlying sensor as a consequence of mechanical stimuli which are delivered by a piezoactuator. The principle resembles balance sensing in mammals. Measurements of the sensor output voltage suggest a proof of concept at frequencies of around 190 kHz and a tag thickness of ∼300 nm. Characterization was performed by scanning electron microscopy and magnetic force microscopy. Micromagnetic and finite-element simulations were conducted to assess basic sensing aspects.

Magnetoresistive Sensors and Magnetic Nanoparticles for Biotechnology

Magnetoresistive Biosensors use a new detection method for molecular recognition reactions based on two recently developed techniques and devices: Magnetic markers and XMR –sensors, where XMR means either GiantMagneto- (GMR) or Tunneling-MagnetoResistance (TMR). The markers are specifically attached to the target molecules, and their magnetic stray field is picked up by the embedded magnetoresistive sensor as a change of the electrical resistance. Compared to established, e.g. fluorescent, detection methods, magnetic biosensors have a number of advantages, including low molecular detection limits, flexibility and the direct availability of an electronic signal suitable for further automated analysis. This makes them a promising choice for the detection units of future widespread and easy to use lab-on-a-chip systems or biochips.

Both the measurement technique using XMR-sensors as well as new developments in the preparation of magnetic carriers are discussed here. Different configurations are discussed and the results for Giant Magnetoresistance sensors are compared to an analysis of the same biological systems marked with fluorescence dyes. Down to a concentration of about 10 pg/μl of, e.g., DNA molecules, the magnetoresistive technique is competitive with nowadays standard analysis methods. The capability of the TMR sensors to detect even single markers is additionally demonstrated by a model experiment using the tip of a magnetic force microscope to meamic the presence of a magnetic particle on top of the sensor surface.

The magnetic carriers (beads) usually detected by the sensors consist of paramagnetic magnetite particles embedded in a polymer matrix with sizes from some μm down to about 100nm. They are linked to, e.g., DNA or proteins (often by a avidin-biotin bond) and thereby enable highly specific detection of complementary molecules. These magnetic particles often suffer from their broad size distribution and the relatively small magnetic moment. With the new colloidal synthesis of superpara- or ferromagnetic Co, CoFe and FePt nanocrystals by, e.g., pyrolythic decomposition of CVD precursor molecules, magnetic markers with superior magnetic moments, smaller size and size distribution can be produced. Here, the question about their potential to replace magnetite is addressed. Starting from a magnetic analysis of the corresponding magnetophoretic mobility of Co and FeCo based alloys their synthesis and resulting microstructural and magnetic properties as function of the underlying particle size distribution and the stability of the oleic acid ligand are discussed.

Moreover, the magnetic particles offer an additional feature: They can be manipulated on chip via currents running through specially designed line patterns. We show, that this manipulation can be performed in a precise and reproducible manner, enabling locally enhanced concentration or even the measurement of binding forces with very low loading rates.

Magnetic particles as markers and carriers of biomolecules

The detection and manipulation of biomolecules on a common platform is of considerable interest not only for application in devices such as diagnostic tools but also for basic research in biological and medical systems. A promising approach is the utilisation of magnetic particles as markers and carriers for biomolecules. The principle functionality of this approach is demonstrated by the authors. Magnetic particles used as markers can be detected by highly sensitive magnetoresistive sensors resulting in a purely electronic signal. A direct comparison with the standard fluorescence method reveals the advantages of using the magnetic particles. In addition, magnetic particles used as carriers can be manipulated on-chip via currents running through especially designed line patterns. Some current drawbacks and future aspects are discussed. The combination of sensing and manipulating magnetic particles is a promising choice for future integrated lab-on-a-chip systems.

Analysing a magnetic molecule detection system--computer simulation

The detection of single molecules, e.g. in biology is possible by marking the interesting molecules with magnetic beads and detect the influence of the beads on giant magnetoresistance (GMR)/tunnel magnetoresistance (TMR)/spin valve (SV) sensors. The development of suitable multilayers has been studied experimentally as well as theoretically in order to optimize the sensor parameters. A finite difference (FD) method including the usually used contributions to the total energy [exchange, antiferromagnetically (af) coupling, anisotropy and magnetostatic] is used for the simulation with additional contributions to the local field according to the stray fields of the beads. In this work, we will show the results of micromagnetic calculations of the magnetization behavior of GMR/TMR sensors considering also the interaction between the domains in the magnetic layers of the sensor and the bead area. We can present first calculations where the bead particles (signal source) and the magnetic layers (sensor device) are considered as a whole magnetic ensemble.

Detection and manipulation of biomolecules by magnetic carriers

The detection and manipulation of single molecules on a common platform would be of great interest for basic research of biological or chemical systems. A promising approach is the application of magnetic carriers. The principles are demonstrated in this contribution. It is shown that paramagnetic beads can be detected by highly sensitive magnetoresistive sensors yielding a purely electronic signal. Different configurations are discussed. The capability of the sensors to detect even single markers is demonstrated by a model experiment. In addition, the paramagnetic beads can be used as carriers for biomolecules. They can be manipulated on-chip via currents running through specially designed line patterns. Thus, magnetic markers in combination with magnetoresistive sensors are a promising choice for future integrated lab-on-a-chip systems.

Comparison of a prototype magnetoresistive biosensor to standard fluorescent DNA detection

We present a comparative analysis of a magnetoresistive biosensor to standard fluorescent DNA detection. The biosensor consists of giant magnetoresistive (GMR) type Cu/Ni(80)Fe(20) multilayers in the second antiferromagnetic coupling maximum. Each of the 206 elements of the magnetoresistive biosensor is patterned into a spiral-shaped line that can cover the area of a typical DNA spot (70 microm diameter). The probe DNA is assembled on top of the sensor elements in different concentrations ranging from 16 pg/microl to 10 ng/microl. Complementary biotin-labeled analyte DNA is hybridized to the probe DNA at a concentration of 10 ng/microl. A number of different commercially available magnetic microspheres are investigated to determine the most appropriate markers. The experimental comparison shows that the relative sensitivity of the magnetoresistive biosensor is superior to the fluorescent detection at low probe DNA concentrations.

Ultrahigh-density nanowire arrays grown in self-assembled diblock copolymer templates

We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 x 10(11) wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.