Redox-Active Molecular Nanowire Flash Memory for High-Endurance and High-Density Nonvolatile Memory Applications

In this work, high-performance top-gated nanowire molecular flash memory has been fabricated with redox-active molecules. Different molecules with one and two redox centers have been tested. The flash memory has clean solid/molecule and dielectric interfaces, due to the pristine molecular self-assembly and the nanowire device self-alignment fabrication process. The memory cells exhibit discrete charged states at small gate voltages. Such multi-bit memory in one cell is favorable for high-density storage. These memory devices exhibit fast speed, low power, long memory retention, and exceptionally good endurance (>10(9) cycles). The excellent characteristics are derived from the intrinsic charge-storage properties of the protected redox-active molecules. Such multi-bit molecular flash memory is very attractive for high-endurance and high-density on-chip memory applications in future portable electronics.

The effect of protein corona composition on the interaction of carbon nanotubes with human blood platelets

Carbon nanotubes (CNT) are one of the most promising nanomaterials for use in medicine. The blood biocompatibility of CNT is a critical safety issue. In the bloodstream, proteins bind to CNT through non-covalent interactions to form a protein corona, thereby largely defining the biological properties of the CNT. Here, we characterize the interactions of carboxylated-multiwalled carbon nanotubes (CNTCOOH) with common human proteins and investigate the effect of the different protein coronas on the interaction of CNTCOOH with human blood platelets (PLT). Molecular modeling and different photophysical techniques were employed to characterize the binding of albumin (HSA), fibrinogen (FBG), γ-globulins (IgG) and histone H1 (H1) on CNTCOOH. We found that the identity of protein forming the corona greatly affects the outcome of CNTCOOH's interaction with blood PLT. Bare CNTCOOH-induced PLT aggregation and the release of platelet membrane microparticles (PMP). HSA corona attenuated the PLT aggregating activity of CNTCOOH, while FBG caused the agglomeration of CNTCOOH nanomaterial, thereby diminishing the effect of CNTCOOH on PLT. In contrast, the IgG corona caused PLT fragmentation, and the H1 corona induced a strong PLT aggregation, thus potentiating the release of PMP.

Toxicity of carboxylated carbon nanotubes in endothelial cells is attenuated by stimulation of the autophagic flux with the release of nanomaterial in autophagic vesicles

Carbon nanotubes (CNTs) exhibit a number of unique properties that make them attractive for various nanomedicine applications including their intravascular use. Therefore, the vascular toxicity of CNTs is a critical safety concern and methods of CNTs toxicity modulation are of great interest. Here, we report that carboxylated multiwalled carbon nanotubes (MWCNTs) induce a decrease in viability of cultured human umbilical vein endothelial cells (HUVECs) associated with the profound accumulation of autophagosomes. This autophagosome accumulation was mTOR kinase independent and was caused by blockade of the autophagic flux rather than by activation of autophagy. Stimulation of the autophagic flux with 1nmol/L bafilomycin A1 attenuated the cytotoxicity of carboxylated MWCNTs in HUVECs and was associated with the extracellular release of the nanomaterial in autophagic microvesicles. Thus, pharmacological stimulation of the autophagic flux may represent a new method of cytoprotection against toxic effects of nanomaterials.

FROM THE CLINICAL EDITOR

This study investigates the mechanisms of toxicity of multiwalled carbon nanutubes on human endothelial cells, concluding that pharmacological stimulation of autophagic flux may represent a new method of cytoprotection against the toxic effects of these nanomaterials.

Surface mediated assembly of small, metastable gold nanoclusters

The unique properties of metallic nanoclusters are attractive for numerous commercial and industrial applications but are generally less stable than nanocrystals. Thus, developing methodologies for stabilizing nanoclusters and retaining their enhanced functionality is of great interest. We report the assembly of PPh3-protected Au9 clusters from a heterogeneous mixture into films consisting of sub 3 nm nanocluster assemblies. The depositing nanoclusters are metastable in solution, but the resulting nanocluster assemblies are stabilized indefinitely in air or fresh solvent. The films exhibit distinct structure from Au nanoparticles observed by X-ray diffraction, and film dissolution data support the preservation of small nanoclusters. UV-Vis spectroscopy, electrospray ionization mass spectrometry, X-ray photoelectron spectroscopy and electron microscopy are used to elucidate information regarding the nanocluster formation and assembly mechanism. Preferential deposition of nanocluster assemblies can be achieved on multiple substrates, including polymer, Cr, Si, SiO2, SiNx, and metal-organic frameworks (MOFs). Unlike other vapor phase coating processes, nanocluster assembly on the MIL-68(In) MOF crystal is capable of preferentially coating the external surface and stabilizing the crystal structure in hydrothermal conditions, which should enhance their storage, separation and delivery capabilities.

Fabrication, characterization and simulation of high performance Si nanowire-based non-volatile memory cells

We report the fabrication, characterization and simulation of Si nanowire SONOS-like non-volatile memory with HfO(2) charge trapping layers of varying thicknesses. The memory cells, which are fabricated by self-aligning in situ grown Si nanowires, exhibit high performance, i.e. fast program/erase operations, long retention time and good endurance. The effect of the trapping layer thickness of the nanowire memory cells has been experimentally measured and studied by simulation. As the thickness of HfO(2) increases from 5 to 30 nm, the charge trap density increases as expected, while the program/erase speed and retention remain the same. These data indicate that the electric field across the tunneling oxide is not affected by HfO(2) thickness, which is in good agreement with simulation results. Our work also shows that the Omega gate structure improves the program speed and retention time for memory applications.

A new approach to prepare well-dispersed CaF(2) nanoparticles by spray drying technique

Previously, nano-sized calcium fluoride (CaF₂) particles were prepared using a spray drying method by simultaneously feeding Ca(OH)₂ and NH₄F solutions to a two-liquid nozzle. The aim of the present study was to prepare better-dispersed nano-CaF₂ particles by co-forming a soluble salt, sodium chloride (NaCl). NaCl of various concentrations were added to the NH(4) F solution, leading to formation of (CaF₂ +NaCl) composites with CaF₂ /NaCl molar ratios of 4/1, 4/4, and 4/16. Pure nano-CaF₂ was also prepared as the control. Powder X-ray diffraction analysis showed that the products contained crystalline CaF₂ and NaCl. Scanning electron microscopy examinations showed that both the CaF₂ /NaCl composite and pure CaF₂ particles were about (50-800) nm in size and consisted of primary CaF₂ particles of < 50 nm in size. BET surface area measurements showed similar primary particle sizes for all samples. Dynamic light scattering measurements showed that the washed (CaF₂+NaCl) particles were much smaller than the pure CaF₂ as the dissolution of NaCl "freed" most of the primary CaF₂ particles, leading to a greater degree of particle dispersion. The well-dispersed nano-CaF₂ may be expected to be a more effective anticaries agent than NaF by providing longer lasting elevations of fluoride concentrations in oral fluids.

Correlation between the performance and microstructure of Ti/Al/Ti/Au Ohmic contacts to p-type silicon nanowires

Understanding the electrical and microstructural aspects of contact formation at nanoscale is essential for the realization of low-resistance metallization suitable for the next generation of nanowire based devices. In this study, we present detailed electrical and microstructural characteristics of Ti/Al/Ti/Au metal contacts to p-type Si nanowires (SiNWs) annealed at various temperatures. Focused ion beam cross-sectioning techniques and scanning transmission electron microscopy (STEM) were used to determine the microstructure of the source/drain metal contacts of working SiNW field-effect transistors (FETs) annealed for 30 s in the 450-850 °C temperature range in inert atmosphere. Formation of titanium silicides is observed at the metal/semiconductor interface after the 750 °C anneal. Extensive Si out-diffusion from the nanowire after the 750 °C anneal led to Kirkendall void formation. Annealing at 850 °C led to almost complete out-diffusion of Si from the nanowire core. Devices with 550 °C annealed contacts had linear electrical characteristics; whereas the devices annealed at 750 °C had the best characteristics in terms of linearity, symmetric behavior, and yield. Devices annealed at 850 °C had poor yield, which can be directly attributed to the microstructure of the contact region observed in STEM.