Evaluating the influence of seasonal stratification on mercury methylation rates in the water column and sediment in a contaminated section of a western U.S.A. reservoir

Mercury methylation frequently occurs at the active oxic/anoxic boundary between the sediment bed and water column of lakes and reservoirs. Previous studies suggest that the predominant mercury methylation zone moves to the water column during periods of stratification and that high potential methylation rates (K_m) in sediment require oxygenated overlying water. However, simultaneous measurements of methylmercury (MeHg) production in both the sediment and water column remain limited. Understanding the relative importance of sediment versus water column methylation and the impact of seasonal stratification on these processes has important implications for managing MeHg production. This study measured K_m and potential demethylation rates (K_dm) using stable isotope tracers of unfiltered inorganic mercury and MeHg in sediments and water of the littoral and profundal zones of a shallow branch of the Nacimiento Reservoir in California's central coastal range. Field sampling was conducted once during winter (well-mixed/oxygenated conditions) and once during late summer (thermally stratified/anoxic conditions). The results showed very high ambient MeHg concentrations in hypolimnetic waters (up to 7.5 ng L^-1; 79% MeHg/total Hg). During late summer, littoral sediments had higher K_m (0.024 day^-1) compared to profundal sediments (0.013 day^-1). Anoxic water column K_m were of similar magnitude to K_m in the sediment (0.03 day^-1). Following turnover, profundal sediment K_m did not change significantly, but water column K_m became insignificant. Summer and winter sediment K_dm were higher in profundal (2.35, 3.54 day^-1, respectively) compared to the littoral sediments (0.52, 2.56 day^-1, respectively). When modelled, K_m in the water column could account for approximately 40% of the hypolimnetic MeHg. Our modelling results show that the remaining MeHg in the hypolimnion could originate from the profundal sediment. While further study is needed, these results suggest that addressing methylation in the water column and profundal sediment are of equal importance to any remediation strategy.

Investigation of an immobilization process for PFAS contaminated soils

A two-phased bench-scale study was conducted to evaluate various sorbents for possible use as chemical stabilizing agents, along with cement solidification, for possible use in an in-situ solidification/stabilization (immobilization) treatment process for per- and polyfluoroalkyl (PFAS) contaminated soils. The first phase involved sorption experiments for six selected PFAS compounds diluted in a water solution, using five selected sorbents: granular activated carbon (GAC), activated carbon-clay blend, modified clay, biochar, iron (Fe)-amended biochar, and Ottawa sand as a control media. The second phase involved chemical stabilization treatment (via sorption), using the most effective sorbent identified in the first phase, followed by solidification of two soils from PFAS-contaminated sites. Physical solidification was achieved by adding cement as a binding agent. Results from the first phase (sorption experiments) indicated that GAC was slightly more successful than the other sorbents in sorption performance for a 3000 μg/L solution containing a mixture of the six selected PFAS analytes (500 μg/L concentration each of shorter- and longer-chain alkyl acids), and was the only sorbent used in the second phase of this study. While the GAC, activated carbon-clay blend, and modified clay sorbents showed similar sorption performance for the longer chain analytes tested, both the activated carbon-clay blend and modified clay, exhibited slightly less sorptive capacity than GAC for the shorter-chain alkyl acids. Immobilization effectiveness was evaluated by soil leachability testing using Environmental Protection Agency (EPA) Method 1312, Synthetic Precipitation Leaching Procedure (SPLP) on the samples collected from two PFAS-contaminated sites. For the majority of the PFAS soil analytes, the addition of GAC sorbent (chemical stabilization) substantially reduced the leachability of PFAS compounds from the contaminated soil samples, and the addition of cement as a physical binding agent (solidification) further decreased leachability for a few of the PFAS compounds. Overall immobilization of PFAS analytes that were detectable in the leachate from two PFAS contaminated soils ranged from 87.1% to 99.9%. Therefore, it is reasonable to consider that the laboratory testing results presented here may have application to further pilot or limited field-scale studies within a broader suite of PFAS-contaminated site treatment options that are currently available for treating PFAS contaminated soils.

Supporting contaminated sites management with Multiple Criteria Decision Analysis: Demonstration of a regulation-consistent approach

This study proposes a set of key decision-making features of the contaminated site remediation process to assist in selecting the most appropriate decision support method(s). Using a case study consistent with the requirements of the U.S. regulation for contaminated sites management, this article shows that suitable Multiple Criteria Decision Analysis methods can be selected based on a dynamic and evolving problem structuring. The selected methods belong to the family of PROMETHEE methods and can provide ranking recommendations of the considered alternatives using variable structures of the criteria, evaluation of the alternatives and exploitation of the preference model. It was found that in order to support a quick and up-to-date application of powerful decision support techniques in the process of remediation of contaminated sites, decision analysts and stakeholders should interact and co-develop the process. This research also displays how such interactions can guarantee a transparent and traceable decision recommendation so that stakeholders can better understand why some alternatives perform comprehensively better than others when a multitude of inputs is used in the decision-making process.

Effect of organic matter concentration and characteristics on mercury mobilization and methylmercury production at an abandoned mine site

Thousands of abandoned mines throughout the western region of North America contain elevated total-mercury (THg) concentrations. Mercury is mobilized from these sites primarily due to erosion of particulate-bound Hg (THg-P). Organic matter-based soil amendments can promote vegetation growth on mine tailings, reducing erosion and subsequent loading of THg-P into downstream waterbodies. However, the introduction of a labile carbon source may stimulate microbial activity that can produce methylmercury (MeHg)-the more toxic and bioaccumulative form of Hg. Our objectives were to investigate how additions of different organic matter substrates impact Hg mobilization and methylation using a combination of field observations and controlled experiments. Field measurements of water, sediment, and porewater were collected downstream of the site and multi-year monitoring (and load calculations) were conducted at a downstream gaging station. MeHg production was assessed using stable isotope methylation assays and mesocosm experiments that were conducted using different types of organic carbon soil amendments mixed with materials from the mine site. The results showed that >80% of the THg mobilized from the mine was bound to particles and that >90% of the annual Hg loading occurred during the period of elevated discharge during spring snowmelt. Methylation rates varied between different types of soil amendments and were correlated with the components of excitation emission matrices (EEMs) associated with humic acid fractions of organic matter. The mesocosm experiments showed that under anoxic conditions carbon amendments to tailings could significantly increase porewater MeHg concentrations (up to 13 ± 3 ng/L). In addition, the carbon amendments significantly increased THg partitioning into porewater. Overall, these results indicate that soil amendment applications to reduce surface erosion at abandoned mine sites could be effective at reducing particulate Hg mobilization to downstream waterbodies; however, some types of carbon amendments can significantly increase Hg methylation as well as increase the mobilization of dissolved THg from the site.

Comparison of the efficiency of chitinous and ligneous substrates in metal and sulfate removal from mining-influenced water

Mining-influenced water (MIW) remediation is challenging, not only due to its acidity and high metal content, but also due to its presence in remotely located mine sites with difficult surrounding environments. An alternative to common remediation technologies, is the use of sulfate-reducing bacteria (SRB) to achieve simultaneous sulfate reduction and metal removal in on-site anaerobic passive systems. In these systems, the organic carbon source (substrate) selection is critical to obtaining the desired effluent water quality and a reasonable treated volume. In this study, we evaluated the use of two different substrates: a chitinous product obtained from crushed crab shells, and a more traditional ligneous substrate. We put the substrates, both with and without water pretreatment consisting of aeration and pH adjustment, in anaerobic experimental columns. The treatment with the chitinous substrate was more effective in removing metals (Al, Cu, Fe, Cd, Mn, Zn) and sulfate for a longer period (458 days) than the ligneous substrate (78 days) before suffering Zn breakthrough. The reactors fed with pretreated water had longer operational periods and lower metals and sulfate concentrations in the effluent than those with untreated influent water. Zn was consistently removed to levels <0.3 mg/L for 513 days in the chitinous substrate columns, while levels <0.3 mg/L were maintained for only 140 days in the ligneous substrate pretreated column. The highest sulfate removal rates achieved in this study were in the range of 5-6 mol/m³/d for the chitinous substrate and 1-2 mol/m³/d for the ligneous substrate. Overall, the chitinous substrate proved to be more efficient in the removal of all the aforementioned metals and for sulfate when compared to the ligneous substrate. This could be the determinant when selecting a substrate for passive systems treating acidic MIW, particularly when Zn and Mn removal is necessary.

The Challenges of PFAS Remediation

Many military bases and their surrounding communities are impacted by contamination with per- and polyfluoroalkyl substances (PFAS) from Aqueous Film-Forming Foams (AFFFs). Soil sorption technologies provide a promising solution to immobilize PFAS in the soil and prevent groundwater and drinking water contamination. This article is the result of a collaborative effort between Battelle and the U.S. EPA's review of the most promising technologies.

Assessing the Impact of Removing Select Materials from Coal Mine Overburden, Central Appalachia Region, USA

The exposure of readily soluble components of overburden materials from surface coal mining to air and water results in mineral oxidation and carbonate mineral dissolution, thus increasing coal mine water conductivity. A conductivity benchmark of 300 μS/cm for mine water discharges in the Appalachian region has been suggested to protect aquatic life and the environment. A USGS screening-level leach test was applied to individual strata from three cores collected from a surface mine site in the Central Appalachian region to generate preliminary conductivity rankings, which were used to classify strata for two disposal scenarios: (i) Unmodified Scenario, which included all extracted strata and (ii) Modified Scenario, which excluded 15% (by mass) of the overburden materials with the highest conductivities. We evaluated overburden leaching conductivity using EPA Method 1627 in 18 dry-wet cycles, generating conductivities of 1,020-1,150 μS/cm for the Unmodified Scenario and 624-979 μS/cm for the Modified Scenario. Hence, overburden segregation was successful in reducing the leachate conductivity, but did not reach the proposed benchmark. The leachate was dominated by sulfate in the first four cycles and by bicarbonates in cycles 5-18 in columns with higher sulfur content, while bicarbonates were dominant throughout experiments with lower sulfur content in overburden. The use of conductivity rankings, isolation of potentially problematic overburden strata, and appropriate materials management could reduce conductivity in Central Appalachian streams and other surface mining areas.

Mechanisms and effectivity of sulfate reducing bioreactors using a chitinous substrate in treating mining influenced water

Mining-influenced water (MIW) is one of the main environmental challenges associated with the mining industry. Passive MIW remediation can be achieved through microbial activity in sulfate-reducing bioreactors (SRBRs), but their actual removal rates depend on different factors, one of which is the substrate composition. Chitinous materials have demonstrated high metal removal rates, particularly for the two recalcitrant MIW contaminants Zn and Mn, but their removal mechanisms need further study. We studied Cd, Fe, Zn, and Mn removal in bioactive and abiotic SRBRs to elucidate the metal removal mechanisms and the differences in metal and sulfate removal rates using a chitinous material as substrate. We found that sulfate-reducing bacteria are effective in increasing metal and sulfate removal rates and the duration of operation in SRBRs, and that the main mechanism involved was metal precipitation as sulfides. The solid residues provided evidence of the presence of sulfides in the bioactive column, more specifically ZnS, according to XPS analysis. The feasibility of passive treatments with a chitinous substrate could be an important option for MIW remediation.

Water-level fluctuations influence sediment porewater chemistry and methylmercury production in a flood-control reservoir

Reservoirs typically have elevated fish mercury (Hg) levels compared to natural lakes and rivers. A unique feature of reservoirs is water-level management which can result in sediment exposure to the air. The objective of this study is to identify how reservoir water-level fluctuations impact Hg cycling, particularly the formation of the more toxic and bioaccumulative methylmercury (MeHg). Total-Hg (THg), MeHg, stable isotope methylation rates and several ancillary parameters were measured in reservoir sediments (including some in porewater and overlying water) that are seasonally and permanently inundated. The results showed that sediment and porewater MeHg concentrations were over 3-times higher in areas experiencing water-level fluctuations compared to permanently inundated sediments. Analysis of the data suggest that the enhanced breakdown of organic matter in sediments experiencing water-level fluctuations has a two-fold effect on stimulating Hg methylation: 1) it increases the partitioning of inorganic Hg from the solid phase into the porewater phase (lower log K_d values) where it is more bioavailable for methylation; and 2) it increases dissolved organic carbon (DOC) in the porewater which can stimulate the microbial community that can methylate Hg. Sulfate concentrations and cycling were enhanced in the seasonally inundated sediments and may have also contributed to increased MeHg production. Overall, our results suggest that reservoir management actions can have an impact on the sediment-porewater characteristics that affect MeHg production. Such findings are also relevant to natural water systems that experience wetting and drying cycles, such as floodplains and ombrotrophic wetlands.

Variation among trauma centers' calculation of Glasgow Coma Scale score: results of a national survey

BACKGROUND

Glasgow Coma Scale (GCS) scoring is enigmatic in intubated patients. To determine if there is consensus among Level I trauma centers, a national telephone survey was conducted.

METHODS

Trauma registrars at state-verified or American College of Surgeons-verified Level I trauma centers were questioned about GCS scoring, recording, and reporting in patients who are intubated or intubated and pharmacologically paralyzed.

RESULTS

Seventy-three centers were contacted. Seventy-one use initial GCS scores for registry recording. Intubated patients are given 1 point for verbal component plus eye and motor scores at 26% of centers and a total GCS score of 3 at 23%; GCS score is estimated with "T" given for verbal component at 16%, scored as unknown at 10%, always scored as 15 at 10%, and the method of scoring is unknown at 15%. Pharmacologically paralyzed intubated patients are given a total GCS score of 3 at 34%, GCS score is estimated with "T" given for verbal component at 18%, patients are given 1 point for verbal component plus eye and motor scores at 12%, scored as unknown at 11%, always scored as 15 at 8%, and the method of scoring is unknown at 16%.

CONCLUSION

Wide variation in GCS scoring among Level I trauma centers was identified. Because GCS scores are used in treatment algorithms, trauma scoring, and outcome prediction (Trauma and Injury Severity Score), uniform scoring is essential and should be pursued. Use of state and national databases and outcome research may be adversely affected by the lack of consistent GCS scoring.

Urinalysis of alpha-hydroxyalprazolam, alpha-hydroxytriazolam, and other benzodiazepine compounds by GC/EIMS

This procedure was developed as an overall benzodiazepine confirmation scheme and includes the detection of the most important urinary analytes encountered by clinical toxicology laboratories in North America: alpha-hydroxyalprazolam, alpha-hydroxytriazolam, 2-hydroxyethylflurazepam, oxazepam, temazepam, and lorazepam. Desmethyldiazepam (nordiazepam) was not targeted because it is metabolized to oxazepam. This procedure takes advantage of beta-glucuronidase hydrolysis for analysis of intact benzodiazepine molecules, oxazepam-2H5 as an internal standard, a newly developed extraction solvent, and a silylating moiety that may be more sensitive than trimethylsilyl (-TMS) derivatives, the tertbutyldimethylsilyl (-TBDMS) derivative. For all compounds the extraction efficiency was greater than 90% and the limit of quantitation (LOQ at a S/N of 10) was less than 10 ng/mL. Coefficients of variation for a 200-ng/mL control were less than 5% and less than or equal to 11% for within-run and between-run trials, respectively. Of 13 human specimens screened by EMIT and most with self-reported histories, alpha-hydroxyalprazolam was found in seven (range 49-1264 ng/mL), oxazepam was found in five (72-3897 ng/mL), and lorazepam (476 ng/mL), 2-hydroxyethylflurazepam (2301 ng/mL), and alpha-hydroxytriazolam (106 ng/mL) in one each.