Nanoparticle stability in lake water shaped by natural organic matter properties and presence of particulate matter

Predicting nanoparticle (NP) fate in the environment continues to remain a challenge, especially for natural surface water systems, where NPs can hetero-aggregate with natural organic and mineral suspended matter. Here we present the interactions and aggregation behavior of TiO₂ NPs with natural organic matter (NOM) in a natural lake water. NP fate in a synthetic water of the same pH and ionic composition was also tested in the presence and absence of NOM analogs to gain insight into the different stabilizing effects of each NOM type. Several complementary analytical techniques were utilized to assess lake NOM composition, including pyrolysis-gas chromatography-mass spectrometry, gel permeation chromatography, the polarity rapid-assessment method, and Nanoparticle Tracking Analysis. In the natural lake water, the TiO₂ NPs preferentially interacted with mostly anionic NOM of high and medium molecular weight (~1200-1450 and 400-520 Da). Specifically, strong interactions with proteins and polyhydroxy aromatics were observed. NP fate and stability were determined in both raw lake water containing mineral particulate matter and total NOM (NOM_tot) and filtered lake water containing only NOM <0.8 μm (NOM_<0.8), with different aggregation profiles observed over time. Additionally, three times the number of TiO₂ NPs remained in suspension when only NOM_<0.8 was present compared to the unfiltered water containing mineral particulate matter and NOM_tot. These results demonstrate the contrasting NP fates in the aquatic environment according to the presence of NOM_tot vs. NOM_<0.8 and further suggest that the use of pure NOM analogs may not accurately represent NP interactions and fate in the natural system.

Heteroaggregation of titanium dioxide nanoparticles with natural clay colloids

To better understand and predict the fate of engineered nanoparticles in the water column, we assessed the heteroaggregation of TiO2 nanoparticles with a smectite clay as analogues for natural colloids. Heteroaggregation was evaluated as a function of water salinity (10(-3) and 10(-1) M NaCl), pH (5 and 8), and selected nanoparticle concentration (0-4 mg/L). Time-resolved laser diffraction was used, coupled to an aggregation model, to identify the key mechanisms and variables that drive the heteroaggregation of the nanoparticles with colloids. Our data show that, at a relevant concentration, nanoparticle behavior is mainly driven by heteroaggregation with colloids, while homoaggregation remains negligible. The affinity of TiO2 nanoparticles for clay is driven by electrostatic interactions. Opposite surface charges and/or high ionic strength favored the formation of primary heteroaggregates via the attachment of nanoparticles to the clay. The initial shape and dispersion state of the clay as well as the nanoparticle/clay concentration ratio also affected the nature of the heteroaggregation mechanism. With dispersed clay platelets (10(-3) M NaCl), secondary heteroaggregation driven by bridging nanoparticles occurred at a nanoparticle/clay number ratio of greater than 0.5. In 10(-1) M NaCl, the clay was preaggregated into larger and more spherical units. This favored secondary heteroaggregation at lower nanoparticle concentration that correlated to the nanoparticle/clay surface area ratio. In this latter case, a nanoparticle to clay sticking efficiency could be determined.

Salt rejection and water flux through a tubular pervaporative polymer membrane designed for irrigation applications

The performance of a hydrophilic polyester tubular pervaporative membrane in treating high-salinity water for irrigation was investigated. The membrane was filled with contaminated water and placed in air, soil or sand media. When this occurs water diffuses through the tube, trapping salts within the tube. Sorption and permeation tests and scanning electron microscopy (SEM) were used to assess salt rejection and permeate flux through the tubular membrane when surrounded by deionized water, air, top soil or silver sand. Mean water uptake by the membrane was 0.5 L x m(-2) at room temperature and the water diffusion coefficient was 3.8 x 10(-4) cm2 x s(-1). The permeate flux across the membrane was 7.9 x 10(-3) L(m(-2) x h(-1)) in sand and 5.6 x 10(-2) in air. The rejection of sodium chloride by the tubular membrane in sand was 99.8% or above under all tested conditions. However, when the tube was filled with sodium chloride solution and placed in deionized water, salt was observed to permeate the membrane. SEM images confirmed that variable amounts of sodium chloride crystals were retained inside the membrane walls. These results support the potential application of such a tubular pervaporative membrane for irrigation applications using saline waters; however there may be reduced salt rejection under waterlogged soil conditions.

Stability of nanoparticles in water

Aqueous systems represent a likely carrier for manufactured nanoparticles upon their introduction into the natural environment. Their behavior in water, and in turn the risk that is posed by these materials to environmental and human communities, is a top concern. In terms of risk assessment, nanoparticle exposure to organisms is largely driven by their dispersion and behavior in aqueous systems, while their potential hazard, although not always well understood, is often related to their surface speciation. Both of these characteristics arise from the reactions that occur at the solid/liquid interface. The objective of this article is to establish the current state of the science with regard to the possible changes in surface properties and/or behavior of manufactured nanoparticles in different aqueous solutions of model and inorganic composition. The general reactions occurring at the nanoparticle/water interface, or between nanoparticles themselves, are first introduced. Following this, metal oxides, pure metals and carbon nanoparticles are considered on a case-by-case basis.

Hydration and dispersion of C60 in aqueous systems: the nature of water-fullerene interactions

The nature of fullerene-water interactions and the role that they play in the fate of C60 in aqueous systems is poorly understood. This work provides spectroscopic evidence for the surface hydroxylation of the initially hydrophobic C60 molecule when immersed in water. This mechanism appears to be the basis for stabilizing the hydrophilic nC60 aggregates in suspension. It is remarkable that such a chemical transformation and dispersion are achieved under mild conditions that are readily produced in an aquatic environment. This acquired affinity for water is likely to play a subsequent role in the reactivity, mobility, and bioavailability of fullerenes in aqueous media.

Comparison of the abilities of ambient and manufactured nanoparticles to induce cellular toxicity according to an oxidative stress paradigm

Nanomaterial properties differ from those bulk materials of the same composition, allowing them to execute novel activities. A possible downside of these capabilities is harmful interactions with biological systems, with the potential to generate toxicity. An approach to assess the safety of nanomaterials is urgently required. We compared the cellular effects of ambient ultrafine particles with manufactured titanium dioxide (TiO2), carbon black, fullerol, and polystyrene (PS) nanoparticles (NPs). The study was conducted in a phagocytic cell line (RAW 264.7) that is representative of a lung target for NPs. Physicochemical characterization of the NPs showed a dramatic change in their state of aggregation, dispersibility, and charge during transfer from a buffered aqueous solution to cell culture medium. Particles differed with respect to cellular uptake, subcellular localization, and ability to catalyze the production of reactive oxygen species (ROS) under biotic and abiotic conditions. Spontaneous ROS production was compared by using an ROS quencher (furfuryl alcohol) as well as an NADPH peroxidase bioelectrode platform. Among the particles tested, ambient ultrafine particles (UFPs) and cationic PS nanospheres were capable of inducing cellular ROS production, GSH depletion, and toxic oxidative stress. This toxicity involves mitochondrial injury through increased calcium uptake and structural organellar damage. Although active under abiotic conditions, TiO2 and fullerol did not induce toxic oxidative stress. While increased TNF-alpha production could be seen to accompany UFP-induced oxidant injury, cationic PS nanospheres induced mitochondrial damage and cell death without inflammation. In summary, we demonstrate that ROS generation and oxidative stress are a valid test paradigm to compare NP toxicity. Although not all materials have electronic configurations or surface properties to allow spontaneous ROS generation, particle interactions with cellular components are capable of generating oxidative stress.

Comparison of electrokinetic properties of colloidal fullerenes (n-C60) formed using two procedures

In this study we report on the electrokinetic behavior of colloidal aggregates of C60fullerenes (n-C60) produced through two different techniques: solvent exchange and extended mixing with water. In the first technique, used to produce colloidal materials in several recent toxicity and transport studies, an organic solvent such as tetrahydrofuran (THF) is used to dissolve the C60 before mixing with water. The second technique is more indicative of conditions that might occur in natural aquatic systems. Both types of n-C60 were observed to be negatively charged under a variety of solution chemistries; however, the n-C60 formed using THF was more strongly charged. We conclude that n-C60 likely acquires charge through charge transfer from the organic solvent (when present) and surface hydrolysis reactions. Nevertheless, C60 is capable of acquiring charge and becoming dispersed as n-C60 in water without the aid of organic solvents, a pathway that may be important in determining the mobility of fullerenes in natural systems. These findings also show that n-C60 made using THF retains a portion of the solvent in the cluster structure, subsequently influencing the characteristics of the n-C60 and possibly requiring a re-interpretation of results from recent studies on n-C60 toxicity using THF-derived materials.

Hemopericardium after superior vena cava stenting for malignant SVC obstruction: the importance of contrast-enhanced CT in the assessment of postprocedural collapse

We report the complication of hemopericardium following superior vena cava (SVC) stenting with an uncovered Wallstent in a patient with malignant SVC obstruction. The patient collapsed acutely 15 min following stent placement with hypoxemia and hypotension. A CT scan demonstrated a hemopericardium which was successfully treated with a pericardial drain. The possible complications of SVC stenting, including hemopericardium, pulmonary embolism, mediastinal hematoma, and pulmonary edema from increased venous return resulting from improved hemodynamics, ensure a wide differential diagnosis in the postprocedural collapsed patient and this case emphasizes the important role of contrast-enhanced CT in the peri-resuscitation assessment of these patients.

Decreased platelet function in aortic valve stenosis: high shear platelet activation then inactivation

OBJECTIVE

To elucidate the mechanism of the bleeding tendency observed in patients with aortic valve stenosis.

DESIGN

A prospective study of high and low shear platelet function tests in vitro in normal controls compared with that in patients with severe aortic valve stenosis with a mean (SD) systolic gradient by Doppler of 75 (18) mm Hg before and at least 4 months after aortic valve replacement.

SETTING

District general hospital.

RESULTS

The patients showed reduced retention in the high shear platelet function tests. (a) Platelet retention in the filter test was 53.6 (12.6)% in patients with aortic valve stenosis and 84.8 (9.6)% in the controls (P < 0.001). (b) Retention in the glass bead column test was 49.8 (19.2) in the patients and 87.4 (8.7) in the controls (P < 0.001). (c) The standard bleeding time was longer in the patients (P < 0.06). Results of the high shear tests (a, b, and c) after aortic valve replacement were within the normal range. The platelet count was low but within the normal range before surgery and increased postoperatively (P < 0.01). There were no differences in the results of standard clotting tests, plasma and intraplatelet von Willebrand's factor, or in 15 platelet aggregation tests using five agonists between patients with aortic valve stenosis and controls.

CONCLUSIONS

The high shear haemodynamics of aortic valve stenosis modify platelet function in vivo predisposing to a bleeding tendency. This abnormality of platelet function is detectable only in vitro using high shear tests. The abnormal function is reversed by aortic valve replacement. High shear forces in vitro activate and then inactivate platelets. By the same mechanisms aortic valve stenosis seems to lead to high shear damage in vivo, resulting in a clinically important bleeding tendency in some patients.

Legal issues involving bone marrow transplants to minors

Legal issues are always involved in transplantation situations in which the proposed donor is a minor. This paper outlines the legal issues of informed consent and discusses the requirement for courts to be involved in approval of such transplant procedures. The paper provides a description of the legal procedures of which physicians should be aware when they propose to use donors who are minors for transplant operations.

Ethical and legal issues in the treatment of children with cancer. Our responsibilities to the parents, to the child, and to the other similarly afflicted children

The treating physician's ethical and legal responsibilities to a child with cancer often merge. On the one hand, there is a responsibility to the parents to keep them informed of the risks and benefits of proposed treatment modalities and to obtain their informed consent. On the other hand, there is an independent obligation to the child. Where consent is unreasonably withheld and the child's interests are jeopardized, it is the physician's responsibility to bring the matter to the courts.