Parkinson's disease-associated mutations in α-synuclein alters its lipid-bound state

Lipid-binding properties of α-synuclein play a central role in protein aggregation and progression of Parkinson's disease (PD). α-Synuclein, an intrinsically disordered protein, binds to lipid membranes through the formation of two amphipathic helices that insert into the lipid bilayer. All disease-associated single point mutations have been identified to be within these helical regions of α-synuclein: V15A, A30P, E46K, H50Q, G51D, A53T, and A53V. However, the effects of these mutations on the bound states of the two α helices of the protein have yet to be fully characterized. In this report, we use a tryptophan fluorescence assay to measure the binding of the α helices of these PD-associated mutants to lipid membranes within the lipid-depletion regime. We characterize the binding behavior of each helix, revealing that, generally, the PD-associated mutants shift the equilibrium bound state away from the N-terminal helix of the protein toward helix 2 at lower lipid concentrations. Altogether, our results indicate that disruption to the equilibrium binding of the two α helices of α-synuclein could play a role in PD progression.

Binding equations for the lipid composition dependence of peripheral membrane-binding proteins

The specific recognition of peripheral membrane-binding proteins for their target membranes is mediated by a complex constellation of various lipid contacts. Despite the inherent complexities of the heterogeneous protein-membrane interface, the binding dependence of such proteins is, surprisingly, often reliably described by simple models such as the Langmuir Adsorption Isotherm or the Hill equation. However, these models were not developed to describe associations with two-dimensional, highly concentrated heterogeneous ligands such as lipid membranes. In particular, these models fail to capture the dependence on the lipid composition, a significant determinant of binding that distinguishes target from non-target membranes. In this work, we present a model that describes the dependence of peripheral proteins on lipid composition through an analytic expression for their association. The resulting membrane-binding equation retains the features of these simple models but completely describes the binding dependence on multiple relevant variables in addition to the lipid composition, such as protein and vesicle concentration. Implicit in this lipid composition dependence is a new form of membrane-based cooperativity that significantly differs from traditional solution-based cooperativity. We introduce the Membrane-Hill number as a measure of this cooperativity and describe its unique properties. We illustrate the utility and interpretational power of our model by analyzing previously published data on two peripheral proteins that associate with phosphatidylserine-containing membranes: The transmembrane immunoglobulin and mucin domain-containing protein 3 (TIM3) that employs calcium in its association, and milk fat globulin epidermal growth factor VIII (MFG-E8) which is completely insensitive to calcium. We also provide binding equations for systems that exhibit more complexity in their membrane-binding.

MFG-E8: a model of multiple binding modes associated with ps-binding proteins

Membrane-binding proteins often associate with lipid membranes through a singular binding interface which is generally modeled as a two-state system: bound or unbound. However, even a single interface can engage with more than one mode of binding since a variety of interactions can contribute to the binding event. Unfortunately, the ability to clearly delineate the different binding modes of a singular binding interface has been elusive with existing models. Here, we present a study on milk fat globule EGF factor 8 (MFG-E8), which belongs to a class of proteins that identifies and binds phosphatidylserine (PS). These proteins detect membrane dysregulation implicated in exposed PS in apoptosis and malignant cells. In order to elucidate the factors affecting the binding of MFG-E8, we used a model system consisting of a series of lipid vesicles with varying PS mole fraction to identify the sensitivity of MFG-E8's binding affinity to changes in electrostatics using a tryptophan fluorescence spectral shift assay. Using a newly developed model, we experimentally identified three binding modes, each associated with a different number of PS lipids, with its cooperativity for binding being enhanced by the availability of negatively charged lipids. X-ray reflectivity experiments additionally suggest that MFG-E8's binding modes are influenced by membrane packing. The protocols established for elucidating MFG-E8's interaction with lipid membranes under different membrane conditions can be applied to the study of other membrane-binding proteins that target specific membrane attributes, such as fluidity and electrostatics, and help elucidate these membrane targeting mechanisms and their subsequent binding events.

How Tim proteins differentially exploit membrane features to attain robust target sensitivity

Immune surveillance cells such as T cells and phagocytes utilize integral plasma membrane receptors to recognize surface signatures on triggered and activated cells such as those in apoptosis. One such family of plasma membrane sensors, the transmembrane immunoglobulin and mucin domain (Tim) proteins, specifically recognize phosphatidylserine (PS) but elicit distinct immunological responses. The molecular basis for the recognition of lipid signals on target cell surfaces is not well understood. Previous results suggest that basic side chains present at the membrane interface on the Tim proteins might facilitate association with additional anionic lipids including but not necessarily limited to PS. We, therefore, performed a comparative quantitative analysis of the binding of the murine Tim1, Tim3, and Tim4, to synthetic anionic phospholipid membranes under physiologically relevant conditions. X-ray reflectivity and vesicle binding studies were used to compare the water-soluble domain of Tim3 with results previously obtained for Tim1 and Tim4. Although a calcium link was essential for all three proteins, the three homologs differed in how they balance the hydrophobic and electrostatic interactions driving membrane association. The proteins also varied in their sensing of phospholipid chain unsaturation and showed different degrees of cooperativity in their dependence on bilayer PS concentration. Surprisingly, trace amounts of anionic phosphatidic acid greatly strengthened the bilayer association of Tim3 and Tim4, but not Tim1. A novel mathematical model provided values for the binding parameters and illuminated the complex interplay among ligands. In conclusion, our results provide a quantitative description of the contrasting selectivity used by three Tim proteins in the recognition of phospholipids presented on target cell surfaces. This paradigm is generally applicable to the analysis of the binding of peripheral proteins to target membranes through the heterotropic cooperative interactions of multiple ligands.

Impact of Surface Amphiphilicity on the Interfacial Behavior of Janus Particle Layers under Compression

Langmuir monolayers of silica/gold Janus particles with two different degrees of amphiphilicity have been examined to study the significance of particle surface amphiphilicity on the structure and mechanical properties of the interfacial layers. The response of the layers to the applied compression provides insight into the nature and strength of the interparticle interactions. Different collapse modes observed for the interfacial layers are linked to the amphiphilicity of Janus particles and their configuration at the interface. Molecular dynamics simulations on nanoparticles with similar contact angles provide insight on the arrangement of particles at the interface and support our conclusion that the interfacial configuration and collapse of anisotropic particles at the air/water interface are controlled by particle amphiphilicity.

Tailoring Biomimetic Phosphorylcholine-Containing Block Copolymers as Membrane-Targeting Cellular Rescue Agents

Some synthetic polymers can block cell death when applied following an injury that would otherwise kill the cell. This cellular rescue occurs through interactions of the polymers with cell membranes. However, general principles for designing synthetic polymers to ensure strong, but nondisruptive, cell membrane targeting are not fully elucidated. Here, we tailored biomimetic phosphorylcholine-containing block copolymers to interact with cell membranes and determined their efficacy in blocking neuronal death following oxygen-glucose deprivation. By adjusting the hydrophilicity and membrane affinity of poly(2-methacryloyloxyethyl phosphorylcholine) (polyMPC)-based triblock copolymers, the surface active regime in which the copolymers function effectively as membrane-targeting cellular rescue agents was determined. We identified nonintrusive interactions between the polymer and the cell membrane that alter the collective dynamics of the membrane by inducing rigidification without disrupting lipid packing or membrane thickness. In general, our results open new avenues for biological applications of polyMPC-based polymers and provide an approach to designing membrane-targeting agents to block cell death after injury.

Osmotic Shock-Triggered Assembly of Highly Charged, Nanoparticle-Supported Membranes

Spherical nanoparticle-supported lipid bilayers (SSLBs) combine precision nanoparticle engineering with biocompatible interfaces for various applications, ranging from drug delivery platforms to structural probes for membrane proteins. Although the bulk, spontaneous assembly of vesicles and larger silica nanoparticles (>100 nm) robustly yields SSLBs, it will only occur with low charge density vesicles for smaller nanoparticles (<100 nm), a fundamental barrier in increasing SSLB utility and efficacy. Here, through whole mount and cryogenic transmission electron microscopy, we demonstrate that mixing osmotically loaded vesicles with smaller nanoparticles robustly drives the formation of SSLBs with high membrane charge density (up to 60% anionic lipid or 50% cationic lipid). We show that the osmolyte load necessary for SSLB formation is primarily a function of absolute membrane charge density and is not lipid headgroup-dependent, providing a generalizable, tunable approach toward bulk production of highly curved and charged SSLBs with various membrane compositions.

Sensitivity of peripheral membrane proteins to the membrane context: A case study of phosphatidylserine and the TIM proteins

There is a diverse class of peripheral membrane-binding proteins that specifically bind phosphatidylserine (PS), a lipid that signals apoptosis or cell fusion depending on the membrane context of its presentation. PS-receptors are specialized for particular PS-presenting pathways, indicating that they might be sensitive to the membrane context. In this review, we describe a combination of thermodynamic, structural, and computational techniques that can be used to investigate the mechanisms underlying this sensitivity. As an example, we focus on three PS-receptors of the T-cell Immunoglobulin and Mucin containing (TIM) protein family, which we have previously shown to differ in their sensitivity to PS surface density.

Long-Range Organization of Membrane-Curving Proteins

Biological membranes have a central role in mediating the organization of membrane-curving proteins, a dynamic process that has proven to be challenging to probe experimentally. Using atomic force microscopy, we capture the hierarchically organized assemblies of Bin/amphiphysin/Rvs (BAR) proteins on supported lipid membranes. Their structure reveals distinct long linear aggregates of proteins, regularly spaced by up to 300 nm. Employing accurate free-energy calculations from large-scale coarse-grained computer simulations, we found that the membrane mediates the interaction among protein filaments as a combination of short- and long-ranged interactions. The long-ranged component acts at strikingly long distances, giving rise to a variety of micron-sized ordered patterns. This mechanism may contribute to the long-ranged spatiotemporal control of membrane remodeling by proteins in the cell.

Coupling X-Ray Reflectivity and In Silico Binding to Yield Dynamics of Membrane Recognition by Tim1

The dynamic nature of lipid membranes presents significant challenges with respect to understanding the molecular basis of protein/membrane interactions. Consequently, there is relatively little known about the structural mechanisms by which membrane-binding proteins might distinguish subtle variations in lipid membrane composition and/or structure. We have previously developed a multidisciplinary approach that combines molecular dynamics simulation with interfacial x-ray scattering experiments to produce an atomistic model for phosphatidylserine recognition by the immune receptor Tim4. However, this approach requires a previously determined protein crystal structure in a membrane-bound conformation. Tim1, a Tim4 homolog with distinct differences in both immunological function and sensitivity to membrane composition, was crystalized in a closed-loop conformation that is unlikely to support membrane binding. Here we have used a previously described highly mobile membrane mimetic membrane in combination with a conventional lipid bilayer model to generate a membrane-bound configuration of Tim1 in silico. This refined structure provided a significantly improved fit of experimental x-ray reflectivity data. Moreover, the coupling of the x-ray reflectivity analysis with both highly mobile membrane mimetic membranes and conventional lipid bilayer molecular dynamics simulations yielded a dynamic model of phosphatidylserine membrane recognition by Tim1 with atomic-level detail. In addition to providing, to our knowledge, new insights into the molecular mechanisms that distinguish the various Tim receptors, these results demonstrate that in silico membrane-binding simulations can remove the requirement that the existing crystal structure be in the membrane-bound conformation for effective x-ray reflectivity analysis. Consequently, this refined methodology has the potential for much broader applicability with respect to defining the atomistic details of membrane-binding proteins.

Antimicrobial Peptides Share a Common Interaction Driven by Membrane Line Tension Reduction

Antimicrobial peptides (AMPs) are a class of host-defense molecules that neutralize a broad range of pathogens. Their membrane-permeabilizing behavior has been commonly attributed to the formation of pores; however, with the continuing discovery of AMPs, many are uncharacterized and their exact mechanism remains unknown. Using atomic force microscopy, we previously characterized the disruption of model membranes by protegrin-1 (PG-1), a cationic AMP from pig leukocytes. When incubated with zwitterionic membranes of dimyristoylphosphocholine, PG-1 first induced edge instability at low concentrations, then porous defects at intermediate concentrations, and finally worm-like micelle structures at high concentrations. These rich structural changes suggested that pore formation constitutes only an intermediate state along the route of PG-1's membrane disruption process. The formation of these structures could be best understood by using a mesophase framework of a binary mixture of lipids and peptides, where PG-1 acts as a line-active agent in lowering interfacial bilayer tensions. We have proposed that rather than being static pore formers, AMPs share a common ability to lower interfacial tensions that promote membrane transformations. In a study of 13 different AMPs, we found that peptide line-active behavior was not driven by the overall charge, and instead was correlated with their adoption of imperfect secondary structures. These peptide structures commonly positioned charged residues near the membrane interface to promote deformation favorable for their incorporation into the membrane. Uniquely, the data showed that barrel-stave-forming peptides such as alamethicin are not line-active, and that the seemingly disparate models of toroidal pores and carpet activity are actually related. We speculate that this interplay between peptide structure and the distribution of polar residues in relation to the membrane governs AMP line activity in general and represents a novel, to our knowledge, avenue for the rational design of new drugs.

Quantitative analysis of total reflection X-ray fluorescence from finely layered structures using XeRay

Total reflection x-ray fluorescence (TXRF) is a widely applicable experimental technique for studying chemical element distributions across finely layered structures at extremely high sensitivity. To promote and facilitate scientific discovery using TXRF, we developed a MATLAB-based software package with a graphical user interface, named XeRay, for quick, accurate, and intuitive data analysis. XeRay lets the user model any layered system, each layer with its independent chemical composition and thickness, and enables fine-tuned data fitting. The accuracy of XeRay has been tested in the analysis of TXRF data from both air/liquid interface and liquid/liquid interfacial studies and has been compared to literature results. In an air/liquid interface study, Ca²⁺ sequestration was measured at a Langmuir monolayer of 1-stearoyl-2-oleoyl-sn-glycero-3-phosphatidic acid (SOPA) on a buffer solution of 1 mM CaCl₂ at pH 7.5. Data analysis with XeRay reveals that each 1 nm² of interfacial area contains 2.38 ± 0.06 Ca²⁺ ions, which corresponds to a 1:1 ratio between SOPA headgroups and Ca²⁺ ions, consistent with several earlier reports. For the liquid/liquid interface study of Sr²⁺ enrichment at the dodecane/surfactant/water interface, analysis using XeRay gives a surface enrichment of Sr²⁺ at 68_-5⁺⁶ Ų per ion, consistent with the result published for the same dataset.

Robust Gold Nanoparticle Sheets by Ligand Cross-Linking at the Air-Water Interface

We report the results of cross-linking of two-dimensional gold nanoparticle (Au-NP) assemblies at the air-water interface in situ. We introduce an aqueous soluble ruthenium benzylidene catalyst into the water subphase to generate a robust, elastic two-dimensional network of nanoparticles containing cyclic olefins in their ligand framework. The most striking feature of the cross-linked Au-NP assemblies is that the extended connectivity of the nanoparticles enables the film to preserve much of its integrity under compression and expansion, features that are absent in its non-cross-linked counterparts. The cross-linking process appears to "stitch" the nanoparticle crystalline domains together, allowing the cross-linked monolayers to behave like a piece of fabric under lateral compression.

Interfacial rheology of coexisting solid and fluid monolayers

Biologically relevant monolayer and bilayer films often consist of micron-scale high viscosity domains in a continuous low viscosity matrix. Here we show that this morphology can cause the overall monolayer fluidity to vary by orders of magnitude over a limited range of monolayer compositions. Modeling the system as a two-dimensional suspension in analogy with classic three-dimensional suspensions of hard spheres in a liquid solvent explains the rheological data with no adjustable parameters. In monolayers with ordered, highly viscous domains dispersed in a continuous low viscosity matrix, the surface viscosity increases as a power law with the area fraction of viscous domains. Changing the phase of the continuous matrix from a disordered fluid phase to a more ordered, condensed phase dramatically changes the overall monolayer viscosity. Small changes in the domain density and/or continuous matrix composition can alter the monolayer viscosity by orders of magnitude.

Synergistic Interactions of Sugars/Polyols and Monovalent Salts with Phospholipids Depend upon Sugar/Polyol Complexity and Anion Identity

We found that interactions of dipalmitoylphosphatidylcholine (DPPC) lipid monolayers with sugars are influenced by addition of NaCl. This work is of general importance in understanding how sugar-lipid-salt interactions impact biological systems. Using Langmuir isothermal compressions, fluorescence microscopy, atomic force microscopy, and neutron reflectometry, we examined DPPC monolayers upon addition of sugars/polyols and/or monovalent salts. Sugar-lipid interactions in the presence of NaCl increased with increasing complexity of the sugar/polyol in the order glycerol ≪ glucose < trehalose. When the anion was altered in the series NaF, NaCl, and NaBr, only minor differences were observed. When comparing LiCl, NaCl, and KCl, sodium chloride had the greatest influence on glucose and trehalose interactions with DPPC. We propose that heterogeneity created by cation binding allows for sugars to bind the lipid headgroups. While cation binding increases in the order K(+) < Na(+) < Li(+), lithium ions may also compete with glucose for binding sites. Thus, both cooperative and competitive factors contribute to the overall influence of salts on sugar-lipid interactions.

Collapse of Particle-Laden Interfaces under Compression: Buckling vs Particle Expulsion

Colloidal particles can bind to fluid interfaces with a capillary energy that is thousands of times the thermal energy. This phenomenon offers an effective route to emulsion and foam stabilization where the stability is influenced by the phase behavior of the particle-laden interface under deformation. Despite the vast interest in particle-laden interfaces, the key factors that determine the collapse of such an interface under compression have remained relatively unexplored. In this study, we illustrate the significance of the particle surface wettability and presence of electrolyte in the subphase on interparticle interactions at the interface and the resulting collapse mode. Various collapse mechanisms including buckling, particle expulsion, and multilayer formation are reported and interpreted in terms of particle-particle and particle-interface interactions.

Celebrating Soft Matter's 10th anniversary: screening of the calcium-induced spontaneous curvature of lipid membranes

Lipid membranes are key regulators of cellular function. An important step in membrane-related phenomena is the reshaping of the lipid bilayer, often induced by binding of macromolecules. Numerous experimental and simulation efforts have revealed that calcium, a ubiquitous cellular messenger, has a strong impact on the phase behavior, structural properties, and the stability of membranes. Yet, it is still unknown the way calcium and lipid interactions affect their macroscopic mechanical properties. In this work, we studied the interaction of calcium ions with membrane tethers pulled from giant unilamellar vesicles, to quantify the mechanical effect on the membrane. We found that calcium imposes a positive spontaneous curvature on negatively charged membranes, contrary to predictions we made based on the proposed atomic structure. Surprisingly, this effect vanishes in the presence of physiologically relevant concentrations of sodium chloride. Our work implies that calcium may be a trigger for membrane reshaping only at high concentrations, in a process that is robustly screened by sodium ions.

Confined disclinations: exterior versus material constraints in developable thin elastic sheets

We examine the shape change of a thin disk with an inserted wedge of material when it is pushed against a plane, using analytical, numerical, and experimental methods. Such sheets occur in packaging, surgery, and nanotechnology. We approximate the sheet as having vanishing strain, so that it takes a conical form in which straight generators converge to a disclination singularity. Then, its shape is that which minimizes elastic bending energy alone. Real sheets are expected to approach this limiting shape as their thickness approaches zero. The planar constraint forces a sector of the sheet to buckle into the third dimension. We find that the unbuckled sector is precisely semicircular, independent of the angle δ of the inserted wedge. We generalize the analysis to include conical as well as planar constraints and thereby establish a law of corresponding states for shallow cones of slope ε and thin wedges. In this regime, the single parameter δ/ε^{2} determines the shape. We discuss the singular limit in which the cone becomes a plane, and the unexpected slow convergence to the semicircular buckling observed in real sheets.

Influence of molecular coherence on surface viscosity

Adding small fractions of cholesterol decreases the interfacial viscosity of dipalmitoylphosphatidylcholine (DPPC) monolayers by an order of magnitude per wt %. Grazing incidence X-ray diffraction shows that cholesterol at these small fractions does not mix ideally with DPPC but rather induces nanophase separated structures of an ordered, primarily DPPC phase bordered by a line-active, disordered, mixed DPPC-cholesterol phase. We propose that the free area in the classic Cohen and Turnbull model of viscosity is inversely proportional to the number of molecules in the coherence area, or product of the two coherence lengths. Cholesterol significantly reduces the coherence area of the crystals as well as the interfacial viscosity. Using this free area collapses the surface viscosity data for all surface pressures and cholesterol fractions to a universal logarithmic relation. The extent of molecular coherence appears to be a fundamental factor in determining surface viscosity in ordered monolayers.

Metal-coordination: Using one of nature's tricks to control soft material mechanics

Growing evidence supports a critical role of dynamic metal-coordination crosslinking in soft biological material properties such as self-healing and underwater adhesion1. Using bio-inspired metal-coordinating polymers, initial efforts to mimic these properties have shown promise2. Here we demonstrate how bio-inspired aqueous polymer network mechanics can be easily controlled via metal-coordination crosslink dynamics; metal ion-based crosslink stability control allows aqueous polymer network relaxation times to be finely tuned over several orders of magnitude. In addition to further biological material insights, our demonstration of this compositional scaling mechanism should provide inspiration for new polymer material property-control designs.

pH-Based Regulation of Hydrogel Mechanical Properties Through Mussel-Inspired Chemistry and Processing

The mechanical holdfast of the mussel, the byssus, is processed at acidic pH yet functions at alkaline pH. Byssi are enriched in Fe3+ and catechol-containing proteins, species with chemical interactions that vary widely over the pH range of byssal processing. Currently, the link between pH, Fe3+-catechol reactions, and mechanical function are poorly understood. Herein, we describe how pH influences the mechanical performance of materials formed by reacting synthetic catechol polymers with Fe3+. Processing Fe3+-catechol polymer materials through a mussel-mimetic acidic-to-alkaline pH change leads to mechanically tough materials based on a covalent network fortified by sacrificial Fe3+-catechol coordination bonds. Our findings offer the first direct evidence of Fe3+-induced covalent cross-linking of catechol polymers, reveal additional insight into the pH dependence and mechanical role of Fe3+- catechol interactions in mussel byssi, and illustrate the wide range of physical properties accessible in synthetic materials through mimicry of mussel protein chemistry and processing.

Incommensurate phases of a supported nanoparticle film subjected to uniaxial compression

We investigate experimentally and theoretically the sequence of phases that occurs when a self-assembled monolayer of gold nanoparticles supported on a fluid is compressed uniaxially in a Langmuir trough. Uniaxial compression of the monolayer results in the appearance of lines that have been shown to be regions of trilayer. These lines exhibit complex patterns that depend on the extent of compression. We show that these patterns can be understood in terms of an equilibrium statistical mechanical theory, originally developed in the context of commensurate-incommensurate transitions in krypton monolayers adsorbed on graphite, in which there is an energy cost to line deformations and to line intersections. Even though line intersections are energetically costly, they lower the free energy because they cause the entropy of the system to increase when the density of lines is low enough. Our analytic and Monte Carlo analyses of the model demonstrate that the model exhibits two-phase coexistence. Our experimental observations are qualitatively consistent with the predictions of the model.

Nature of interactions between PEO-PPO-PEO triblock copolymers and lipid membranes: (I) effect of polymer hydrophobicity on its ability to protect liposomes from peroxidation

PEO-PPO-PEO triblock copolymers have opposing effects on lipid membrane integrity: they can behave either as membrane sealants or as membrane permeabilizers. To gain insights into their biomembrane activities, the fundamental interactions between a series of PEO-based polymers and phospholipid vesicles were investigated. Specifically, the effect of copolymer hydrophobicity on its ability to prevent liposomes from peroxidation was evaluated, and partitioning free energy and coefficient involved in the interactions were derived. Our results show that the high degree of hydrophilicity is a key feature of the copolymers that can effectively protect liposomes from peroxidation and the protective effect of the copolymers stems from their adsorption at the membrane surface without penetrating into the bilayer core. The origin of this protective effect induced by polymer absorption is attributed to the retardation of membrane hydration dynamics, which is further illustrated in the accompanying study on dynamic nuclear polarization (DNP)-derived hydration dynamics (Cheng, C.-Y.; Wang, J.-Y.; Kausik, R.; Lee, K. Y. C.; Han S. Biomacromolecules, 2012, DOI: 10.1021/bm300848c).

Nature of interactions between PEO-PPO-PEO triblock copolymers and lipid membranes: (II) role of hydration dynamics revealed by dynamic nuclear polarization

Amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) copolymers, also known as poloxamers, have broad biomembrane activities. To illustrate the nature of these activities, (1)H Overhauser dynamic nuclear polarization NMR spectroscopy was employed to sensitively detect polymer-lipid membrane interactions through the modulation of local hydration dynamics in lipid membranes. Our study shows P188, the most hydrophilic poloxamer that is a known membrane sealant, weakly adsorbs on the membrane surface, yet effectively retards membrane hydration dynamics. Contrarily, P181, the most hydrophobic poloxamer that is a known membrane permeabilizer, initially embeds at lipid headgroups and enhances intrabilayer water diffusivity. Unprecedented resolution for differentiating weak surface adsorption versus translocation of polymers to membranes is obtained by probing local water diffusivity in lipid bilayer systems. Our results illustrate that the relative hydrophilic/hydrophobic ratio of the polymer dictates its functions. These findings gleaned from local hydration dynamics are well supported by a thermodynamics study presented in the accompanying paper (Wang, J.-Y.; Marks, J. M.; Lee, K. Y. C. Biomacromolecules, 2012, DOI: 10.1021/bm300847x).

An ultrasensitive tool exploiting hydration dynamics to decipher weak lipid membrane-polymer interactions

We introduce a newly developed tool, (1)H Overhauser Dynamic Nuclear Polarization (ODNP), to sensitively explore weak macromolecular interactions by site-specifically probing the modulation of the translational dynamics of hydration water at the interaction interface, in the full presence of bulk water. Here, ODNP is employed on an illustrative example of a membrane-active triblock copolymer, poloxamer 188 (P188), which is known to restore the integrity of structurally compromised cell membranes. We observe a distinct change in the translational dynamics of the hydration layer interacting with the lipid membrane surface and the bilayer-interior as P188 is added to a solution of lipid vesicles, but no measurable changes in the dynamics or structure of the lipid membranes. This study shows that hydration water is an integral constituent of a lipid membrane system, and demonstrates for the first time that the modulation of its translational diffusivity can sensitively report on weak polymer-membrane interactions, as well as mediate essential lipid membrane functions. ODNP holds much promise as a unique tool to unravel molecular interactions at interfaces even in the presence of bulk water under ambient conditions.