1
|
A first comprehensive estimate of electronic waste in Canada. JOURNAL OF HAZARDOUS MATERIALS 2023; 448:130865. [PMID: 36764257 DOI: 10.1016/j.jhazmat.2023.130865] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/07/2022] [Revised: 12/24/2022] [Accepted: 01/24/2023] [Indexed: 06/18/2023]
Abstract
Detailed analysis of electronic waste (e-waste) generation and composition is of utmost importance for the proper management of growing e-waste stream worldwide, containing both hazardous and valuable materials. Considering the absence of such comprehensive and up-to-date studies in Canada, this work presents the first estimate of put-on-market electrical and electronic equipment (EEE), the in-use stocks of EEE and e-waste generation in Canada from 1971 to 2030 for 51 product categories comprising 198 product types. Using a dynamic material flow analysis (MFA), the put-on-market EEE is estimated based on trade data retrieved from national and international import and export statistics, and the in-use stocks of EEE and the resulting e-waste are calculated using the Weibull distribution function. The results show that the total mass of EEE within the 60-year period is estimated to be 42.3 million tonnes, with an annual average growth rate of approximately 0.5%. By 2030, the total accumulated in-use stock of EEE is estimated to exceed 13 million tonnes. The estimated e-waste over the 60-year timespan is 29.1 million tonnes. The total annual e-waste generation in Canada is calculated to be 252 kilo tonnes (kt) and 954 kt in the years 2000 and 2020 respectively, which is estimated to reach 1.2 million tonnes by 2030. The e-waste generation per capita increased from 8.3 kg in 2000 to 25.3 kg in 2020 and is estimated to reach 31.5 kg by 2030. This quantification provides valuable insights to policymakers for setting up targets for waste reduction and identifying the resource circularity potential for efficient management of e-waste.
Collapse
|
2
|
Erratum: "Fluid mechanics of facial masks as personal protection equipment (PPE) of COVID-19 virus" [Rev. Sci. Instrum. 92, 074101 (2021)]. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2023; 94:029901. [PMID: 36859042 DOI: 10.1063/5.0143290] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2023] [Accepted: 01/31/2023] [Indexed: 06/18/2023]
|
3
|
A critical review of microplastic degradation and material flow analysis towards a circular economy. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 315:120334. [PMID: 36216183 DOI: 10.1016/j.envpol.2022.120334] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2022] [Revised: 09/12/2022] [Accepted: 09/28/2022] [Indexed: 06/16/2023]
Abstract
The resilience and low cost of plastics has made their usage ubiquitous, but is also the cause of their prevalence and longevity as waste. Plastic pollution has become a great concern to the health and wellbeing of ecosystems around the world; microplastics are a particular threat, due to their high mobility, ease of ingestion by wildlife, and ability to adsorb and carry toxic contaminants. Material flow analysis has been widely applied to examine stocks and flows of materials in other industries, and has more recently been applied to plastics to examine areas where waste can reach the environment. However, while much research has gone into the environmental fate of microplastics, degradation strategies have been a lesser focus, and material flow analysis of microplastics has suffered from lack of data. Furthermore, the variety of plastics, their additives, and any contaminants pose a significant challenge in degrading (and not merely fragmenting) microplastic particles. This review discusses the current degradation strategies and solutions for dealing with existing and newly-generated microplastic waste along with examining the status of microplastics-based material flow analysis, which are critical for evaluating the possibility of incorporating microplastic waste into a circular economy. The degradation strategies are critically examined, identifying challenges and current trends, as well as important considerations that are frequently under-reported. An emphasis is placed on identifying missing data or information in both material flow analysis and degradation methods that could prove crucial in improving understanding of microplastic flows, as well as optimizing degradation strategies and minimizing any negative environmental impact.
Collapse
|
4
|
Leprocaulon nicholsiae and Candelaria asiatica Reported New to Pakistan. BIOL BULL+ 2022. [DOI: 10.1134/s1062359022140035] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
|
5
|
The role of industrial actors in the circular economy for critical raw materials: a framework with case studies across a range of industries. MINERAL ECONOMICS 2022. [PMCID: PMC8860293 DOI: 10.1007/s13563-022-00304-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Abstract
In this article, we explore concrete examples of circularity strategies for critical raw materials (CRMs) in commercial settings. We propose a company-level framework for systematically evaluating circularity strategies (e.g., material recycling, product reuse, and product or component lifetime extension) in specific applications of CRMs from the perspectives of specific industrial actors. This framework is applied in qualitative analyses—informed by relevant literature and expert consultation—of five case studies across a range of industries: (1) rhenium in high-pressure turbine components, (2) platinum group metals in industrial catalysts for chemical processing and oil refining, (3) rare earth permanent magnets in computer hard disk drives, (4) various CRMs in consumer electronics, and (5) helium in magnetic resonance imaging (MRI) machines. Drawing from these case studies, three broader observations can be made about company circularity strategies for CRMs. Firstly, there are multiple, partly competing motivations that influence the adoption of circularity strategies, including cost savings, supply security, and external stakeholder pressure. Secondly, business models and value-chain structure play a major role in the implementation of circularity strategies; business-to-business models appear to be more conducive to circularity than business-to-consumer models. Finally, it is important to distinguish between closed-loop circularity, in which material flows are contained within the “focal” actor’s system boundary, and open-loop circularity, in which material flows cross the system boundary, as the latter has limited potential for mitigating material criticality from the perspective of the focal actor.
Collapse
|
6
|
Fluid mechanics of facial masks as personal protection equipment (PPE) of COVID-19 virus. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2021; 92:074101. [PMID: 34340456 DOI: 10.1063/5.0050133] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/12/2021] [Accepted: 06/19/2021] [Indexed: 06/13/2023]
Abstract
A fluid mechanics model of inhaled air gases, nitrogen (N2) and oxygen (O2) gases, and exhaled gas components (CO2 and water vapor particles) through a facial mask (membrane) to shield the COVID-19 virus is established. The model was developed based on several gas flux contributions that normally take place through membranes. Semiempirical solutions of the mathematical model were predicted for the N95 facial mask accounting on several parameters, such as a range of porosity size (i.e., 1-30 nm), void fraction (i.e., 10-3%-0.3%), and thickness of the membrane (i.e., 10-40 µm) in comparison to the size of the COVID-19 virus. A unitless number (Nr) was introduced for the first time to describe semiempirical solutions of O2, N2, and CO2 gases through the porous membrane. An optimum Nr of expressing the flow of the inhaled air gases, O2 and N2, through the porous membrane was determined (NO2 = NN2 = -4.4) when an N95 facial mask of specifications of a = 20 nm, l = 30 µm, and ε = 30% was used as a personal protection equipment (PPE). The concept of the optimum number Nr can be standardized not only for testing commercially available facial masks as PPEs but also for designing new masks for protecting humans from the COVID-19 virus.
Collapse
|
7
|
Evaluation of the Reduction of Escherichia coli O157:H7 Surrogates in Beef Ribeye Rolls at 54.4°C. MEAT AND MUSCLE BIOLOGY 2019. [DOI: 10.22175/mmb.10787] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022] Open
Abstract
ObjectivesE. coli infections are a primary source of gastroenteritis requiring strict cooking and handling procedures for meat producing companies as directed by the USDA. This study evaluated the reduction of Escherichia coli O157:H7 surrogates in a low temperature cook process at a local medium-large meat processor. This is one of three microbial validation projects; the other projects will investigate Clostidium perfrigens and Salmonella spp. The objective of maintaining meat quality (rare color) throughout cooking processes urges the study of low temperature cook processes to determine their efficacy in microbial control.Materials and MethodsThis study was completed in three replications each consisting of a sample size of n = 25. Four strains of Escherichia coli (American Type Culture Collection, ATCC® BAA-1427, 1428, 1429, and 1431), each approved as a surrogate for E. coli O157:H7, were used in this study. Each surrogate was grown separately. Inoculations of surrogates were prepared utilizing 800 mL of distilled water mixed with 24 g of TSB and inoculated with surrogates. The inoculations were incubated at 37°C for 24 h prior to application. The surrogates were mixed together to make a cocktail just prior to inoculation of meat. Seventy-five (25 per replication) ribeye rolls (IMPS 112-A) were removed from vacuum bags and trimmed. Initial samples were taken to determine initial microbial load prior to inoculation. The pH and temperature were taken in raw meat, after spraying with antimicrobial, and after brining. The pH and temperature of the brine was also recorded. Meat was inoculated with 90 mL of inoculum and was distributed evenly on the surface with a sponge on a stick. The inoculum was allowed to dry for 30 min prior to sampling for inoculation load. Ribeye rolls were then sampled 15 min after going through an antimicrobial spray. Samples for raw meat, initial inoculated meat, and after antimicrobial spray were taken from the surface of the ribeye roll (approximately 100 g). Following sampling, the ribeye rolls were pumped with a brine solution (sugar, salt, and proprietary ingredients) to 15%. The meat was vacuum-packaged in cook-in bags and allowed to sit in a cooler to mimic the longest period of time from packaging until it would be placed in the smokehouse. Ribeye rolls were cooked according to Appendix A at 54.4°C for 112 min, and chilled until the internal temperature was below 4.4°C. Final cooked and chilled samples were taken by cutting a 4 cm steak from the center of the roast. All samples were packaged and sent to Food Safety Net Services (FSNS) for culturing on coliform film. At FSNS 25 g of meat and 225 mL of BPW were stomached, serial dilutions were done and plated on coliform petrifilm and allowed to incubate for 24–48 h. Results were analyzed using the proc GLM procedure of SAS, determining the LSMean and StdError as well as Microsoft Excel.ResultsInitial inoculation loads after inoculation were 6.5 logs and all cooked and chilled samples had less than 1 log. Therefore, the mean log reduction was 5.1 with a standard error of 0.04 from inoculation to post-cook over the three replications.ConclusionThe results suggest that this cook method is sufficient to reduce E. coli O157:H7 in whole-muscle beef ribeye rolls. This information would be beneficial to companies looking to preserve meat quality while utilizing a low temperature cook process.
Collapse
|
8
|
Evaluation of the Reduction of Escherichia coli O157:H7 Surrogates in Beef Ribeye Rolls at 54.4°C. MEAT AND MUSCLE BIOLOGY 2019. [DOI: 10.22175/mmb2019.0176] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022] Open
|
9
|
Erratum: "Degradation/oxidation susceptibility of organic photovoltaic cells in aqueous solutions" [Rev. Sci. Instrum. 86, 124101 (2015)]. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2016; 87:109901. [PMID: 27802748 DOI: 10.1063/1.4964373] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
|
10
|
Cost implications and oncological outcomes for laparoscopic versus open surgery for right hemicolectomy. Ann R Coll Surg Engl 2016; 98:212-5. [PMID: 26890838 DOI: 10.1308/rcsann.2016.0065] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023] Open
Abstract
INTRODUCTION Recent studies have suggested that laparoscopic surgery for colorectal resection confers a cost benefit compared with open surgery. These studies have considered a wide range of colorectal operations together rather than focusing on a single procedure. Our study compared direct clinical costs for laparoscopic versus open right hemicolectomy. METHODS Clinicopathological data and cost of treatment for all patients who underwent a right hemicolectomy between 2012 and 2013 were collected. The primary outcome was total cost of treatment. Secondary outcomes were length of stay, operative time and morbidity. The minimum follow-up duration was 12 months. Costs for laparoscopic and open surgery for elective resection alone were compared. Further analyses were performed comparing emergency cases with elective cases and cancer with non-cancer cases. RESULTS There were 83 patients who underwent a right hemicolectomy during the study period and of these, 65 had an elective procedure. The total cost of a laparoscopic procedure was £3,998.12 compared with £3,427.50 for open surgery (p=0.039). The length of stay was shorter for laparoscopic surgery while the cost of an emergency right hemicolectomy was significantly greater than for elective surgery. CONCLUSIONS Although the length of stay for laparoscopic surgery was shorter, this did not translate to a reduction in cost. The cost benefit from a shorter length of stay was offset by a greater cost of consumables. Cost effectiveness analyses should be designed carefully, and they should consider individual operations separately when making healthcare management and funding decisions.
Collapse
|
11
|
Opto-electrochemical spectroscopy of metals in aqueous solutions. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2016; 87:034102. [PMID: 27036789 DOI: 10.1063/1.4944478] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the electrical resistance of aluminium samples during the initial stage of anodisation processes in aqueous solution. In fact, because the resistance values in this investigation were obtained by holographic interferometry, electromagnetic method rather than electronic method, the abrupt rate change of the resistance was called electrical resistance-emission spectroscopy. The anodisation process of the aluminium samples was carried out by electrochemical impedance spectroscopy (EIS) in different sulphuric acid concentrations (1.0%-2.5% H2SO4) at room temperature. In the meantime, the real time holographic interferometry was used to determine the difference between the electrical resistance of two subsequent values, dR, as a function of the elapsed time of the EIS experiment for the aluminium samples in 1.0%, 1.5%, 2.0%, and 2.5% H2SO4 solutions. The electrical resistance-emission spectra of the present investigation represent a detailed picture of not only the rate change of the electrical resistance throughout the anodisation processes but also the spectra represent the rate change of the growth of the oxide films on the aluminium samples in different solutions. As a result, a new spectrometer was developed based on the combination of the holographic interferometry and electrochemical impedance spectroscopy for studying in situ the electrochemical behavior of metals in aqueous solutions.
Collapse
|
12
|
Degradation/oxidation susceptibility of organic photovoltaic cells in aqueous solutions. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2015; 86:124101. [PMID: 26724047 DOI: 10.1063/1.4936593] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
A criterion of the degradation/oxidation susceptibility of organic photovoltaic (OPV) cells in aqueous solutions was proposed for the first time. The criterion was derived based on calculating the limit of the ratio value of the polarization resistance of an OPV cell in aqueous solution (Rp(s)) to the polarization resistance of the OPV cell in air (Rp(air)). In other words, the criterion lim(Rp(s)/Rp(air)) = 1 was applied to determine the degradation/oxidation of the OPV cell in the aqueous solution when Rp(air) became equal (increased) to Rp(s) as a function of time of the exposure of the OPV cell to the aqueous solution. This criterion was not only used to determine the degradation/oxidation of different OPV cells in a simulated operational environment but also it was used to determine the electrochemical behavior of OPV cells in deionized water and a polluted water with fine particles of sand. The values of Rp(s) were determined by the electrochemical impedance spectroscopy at low frequency. In addition, the criterion can be applied under diverse test conditions with a predetermined period of OPV operations.
Collapse
|
13
|
Environmental and resource implications of phosphorus recovery from waste activated sludge. WASTE MANAGEMENT (NEW YORK, N.Y.) 2015; 45:391-9. [PMID: 25792438 DOI: 10.1016/j.wasman.2015.02.012] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/01/2014] [Revised: 11/10/2014] [Accepted: 02/09/2015] [Indexed: 05/09/2023]
Abstract
Phosphorus is an essential mineral resource for the growth of crops and thus necessary to feed the ever increasing global population. The essentiality and irreplaceability of phosphorus in food production has raised the concerns regarding the long-term phosphorus availability and the resulting food supply issues in the future. Hence, the recovery of phosphorus from waste activated sludge and other waste streams is getting huge attention as a viable solution to tackle the potential availability issues of phosphorus in the future. This study explores the environmental implications of phosphorus recovery from waste activated sludge in Denmark and further elaborates on the potential availability or scarcity issue of phosphorus today and 2050. Life cycle assessment is used to assess the possibility of phosphorus recovery with little or no environmental impacts compared to the conventional mining. The phosphorus recovery method assessed in this study consists of drying process, and thermal gasification of the waste activated sludge followed by extraction of phosphorus from the ashes. Our results indicate that the environmental impacts of phosphorus recovery in an energy efficient process are comparable to the environmental effects from the re-use of waste activated sludge applied directly on farmland. Moreover, our findings conclude that the general recommendation according to the waste hierarchy, where re-use of the waste sludge on farmland is preferable to material and energy recovery, is wrong in this case. Especially when phosphorus is a critical resource due to its life threatening necessity, lack of substitution options and potential future supply risk originating due to the high level of global supply concentration.
Collapse
|
14
|
Tracking the Flow of Resources in Electronic Waste - The Case of End-of-Life Computer Hard Disk Drives. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2015; 49:12441-12449. [PMID: 26351732 DOI: 10.1021/acs.est.5b02264] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Recovery of resources, in particular, metals, from waste flows is widely seen as a prioritized option to reduce their potential supply constraints in the future. The current waste electrical and electronic equipment (WEEE) treatment system is more focused on bulk metals, where the recycling rate of specialty metals, such as rare earths, is negligible compared to their increasing use in modern products, such as electronics. This study investigates the challenges in recovering these resources in the existing WEEE treatment system. It is illustrated by following the material flows of resources in a conventional WEEE treatment plant in Denmark. Computer hard disk drives (HDDs) containing neodymium-iron-boron (NdFeB) magnets were selected as the case product for this experiment. The resulting output fractions were tracked until their final treatment in order to estimate the recovery potential of rare earth elements (REEs) and other resources contained in HDDs. The results further show that out of the 244 kg of HDDs treated, 212 kg comprising mainly of aluminum and steel can be finally recovered from the metallurgic process. The results further demonstrate the complete loss of REEs in the existing shredding-based WEEE treatment processes. Dismantling and separate processing of NdFeB magnets from their end-use products can be a more preferred option over shredding. However, it remains a technological and logistic challenge for the existing system.
Collapse
|
15
|
Prevention of recurrent small bowel obstruction resulting from pelvic adhesions in patients who have previously undergone abdominoperineal excision of the rectum. Tech Coloproctol 2014; 18:1179-80. [PMID: 25354974 DOI: 10.1007/s10151-014-1227-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/30/2014] [Accepted: 09/15/2014] [Indexed: 10/24/2022]
|
16
|
Material flow analysis of NdFeB magnets for Denmark: a comprehensive waste flow sampling and analysis approach. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2014; 48:12229-12237. [PMID: 25238428 DOI: 10.1021/es501975y] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Neodymium-iron-boron (NdFeB) magnets have become highly desirable for modern hi-tech applications. These magnets, in general, contain two key rare earth elements (REEs), i.e., neodymium (Nd) and dysprosium (Dy), which are responsible for the very high strength of these magnets, allowing for considerable size and weight reduction in modern applications. This study aims to explore the current and future potential of a secondary supply of neodymium and dysprosium from recycling of NdFeB magnets. For this purpose, material flow analysis (MFA) has been carried out to perform the detailed mapping of stocks and flows of NdFeB magnets in Denmark. A novel element of this study is the value added to the traditionally practiced MFAs at national and/or global levels by complementing them with a comprehensive sampling and elemental analysis of NdFeB magnets, taken out from a sample of 157 different products representing 18 various product types. The results show that the current amount of neodymium and dysprosium in NdFeB magnets present in the Danish waste stream is only 3 and 0.2 Mg, respectively. However, this number is estimated to increase to 175 Mg of neodymium and 11.4 Mg of dysprosium by 2035. Nevertheless, efficient recovery of these elements from a very diverse electronic waste stream remains a logistic and economic challenge.
Collapse
|
17
|
A historical perspective of Global Warming Potential from Municipal Solid Waste Management. WASTE MANAGEMENT (NEW YORK, N.Y.) 2013; 33:1926-1933. [PMID: 23769238 DOI: 10.1016/j.wasman.2013.04.016] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2012] [Revised: 03/18/2013] [Accepted: 04/29/2013] [Indexed: 06/02/2023]
Abstract
The Municipal Solid Waste Management (MSWM) sector has developed considerably during the past century, paving the way for maximum resource (materials and energy) recovery and minimising environmental impacts such as global warming associated with it. The current study is assessing the historical development of MSWM in the municipality of Aalborg, Denmark throughout the period of 1970 to 2010, and its implications regarding Global Warming Potential (GWP(100)), using the Life Cycle Assessment (LCA) approach. Historical data regarding MSW composition, and different treatment technologies such as incineration, recycling and composting has been used in order to perform the analysis. The LCA results show a continuous improvement in environmental performance of MSWM from 1970 to 2010 mainly due to the changes in treatment options, improved efficiency of various treatment technologies and increasing focus on recycling, resulting in a shift from net emission of 618 kg CO(2)-eq.tonne(-1) to net saving of 670 kg CO(2)-eq.tonne(-1) of MSWM.
Collapse
|
18
|
Measurement of volume resistivity∕conductivity of metallic alloy in inhibited seawater by optical interferometry techniques. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2011; 82:034103. [PMID: 21456767 DOI: 10.1063/1.3565178] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
Optical interferometry techniques were used for the first time to measure the volume resistivity∕conductivity of carbon steel samples in seawater with different concentrations of a corrosion inhibitor. In this investigation, the real-time holographic interferometry was carried out to measure the thickness of anodic dissolved layer or the total thickness, U(total), of formed oxide layer of carbon steel samples during the alternating current (ac) impedance of the samples in blank seawater and in 5-20 ppm TROS C-70 inhibited seawater, respectively. In addition, a mathematical model was derived in order to correlate between the ac impedance (resistance) and the surface (orthogonal) displacement of the surface of the samples in solutions. In other words, a proportionality constant [resistivity (ρ) or conductivity (σ) = 1∕ρ] between the determined ac impedance [by electrochemical impedance spectroscopy (EIS) technique] and the orthogonal displacement (by the optical interferometry techniques) was obtained. The value of the resistivity of the carbon steel sample in the blank seawater was found similar to the value of the resistivity of the carbon steel sample air, around 1 × 10(-5) Ω cm. On the contrary, the measured values of the resistivity of the carbon steel samples were 1.85 × 10(7), 3.35 × 10(7), and 1.7 × 10(7) Ω cm in 5, 10, and 20 ppm TROS C-70 inhibited seawater solutions, respectively. Furthermore, the determined value range of ρ of the formed oxide layers, from 1.7 × 10(7) to 3.35 × 10(7) Ω cm, is found in a reasonable agreement with the one found in literature for the Fe oxide-hydroxides, i.e., goethite (α-FeOOH) and for the lepidocrocite (γ-FeOOH), 1 × 10(9) Ω cm. The ρ value of the Fe oxide-hydroxides, 1 × 10(9) Ω cm, was found slightly higher than the ρ value range of the formed oxide layer of the present study. This is because the former value was determined by a dc method rather than by an electromagnetic method, i.e., holographic interferometry with applications of EIS, i.e., ac method. As a result, erroneous measurements were recorded due to the introduction of heat to Fe oxide-hydroxides.
Collapse
|
19
|
Electrochemical interferometry of a carbon steel in 5–20 ppm KGR-134 inhibited seawater. Electrochem commun 2002. [DOI: 10.1016/s1388-2481(01)00270-3] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
|
20
|
Spontaneous common iliac arteries rupture in Ehlers-Danlos syndrome type IV: report of two cases and review of the literature. Ann R Coll Surg Engl 2001; 83:96-104. [PMID: 11320937 PMCID: PMC2503357] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/19/2023] Open
Abstract
Two patients with previously undiagnosed Ehlers-Danlos syndrome type IV (EDS IV) presented acutely with clinical features suggestive of hypovolemic shock. Emergency laparotomies in both of them revealed spontaneous rupture of the common iliac arteries. The clinical features, operative findings, surgical approach, outcome and implications are discussed.
Collapse
|
21
|
The development of a potential single photon emission computed tomography (SPECT) imaging agent for the corticotropin-releasing hormone receptor type. Bioorg Med Chem Lett 2001; 11:331-3. [PMID: 11212103 DOI: 10.1016/s0960-894x(00)00661-2] [Citation(s) in RCA: 17] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
A high-affinity radioligand for CRHR1 has been prepared that can serve as a template for the development of SPECT imaging agents. The 5-chloro-N-cyclopropylmethyl-N-(2,6-dichloro-4-iodophenyl)-2-methyl-N-propylpyrimidine-4,6-diamine (6b, Ki = 14 nM), and the corresponding 4-bromophenyl analogue (6a, Ki = 21 nM), were synthesized in four steps from compound 3.
Collapse
|
22
|
[Kimura disease. Apropos of a case with review of the literature]. LE JOURNAL MEDICAL LIBANAIS. THE LEBANESE MEDICAL JOURNAL 2000; 48:37-41. [PMID: 10881442] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 02/16/2023]
Abstract
Kimura's disease is an uncommon chronic inflammatory disease of unknown etiology often associated with an important category of reactive lymphadenopathy in Oriental populations. The enlarged nodes are mostly located in the head and neck region. The main pathologic changes in the lymph nodes include florid germinal centers, Warthin-Finkeldey polykaryocytes, vascularization of the germinal centers, increased postcapillary veinules in the paracortex, eosinophilic infiltration and fibrosis. The disease is often confused with angiolymphoid hyperplasia with eosinophilia. Because the adenopathy may be the sole presentation of the disease, the accurate diagnosis may spare the patients unnecessary medical and/or surgical treatment. We report a case of cervical lymphadenopathy as a sole presentation of Kimura's disease.
Collapse
|
23
|
Abstract
This replication of Ott's study [Ott, B. (1986). An Ethical Problem Facing Nurses: The Support of Patient Autonomy in the Do Not Resuscitate Decision. University Microfilms International, Dissertation, Texas Women's University] and McLaughlin et al.'s study [McLaughlin, T., Brown, O. and Herman, J. (1988). Nurses' Perception of the Support of Patient Autonomy in Do Not Resuscitate Situations. Unpublished Research Report] explored hospital staff nurses' perceptions of their role in supporting patient autonomy in the do-not-resuscitate (DNR) decision. One-hundred and sixty-five registered nurses (RNs) participated: 93 from the Veterans Administration Medical Center and 72 from a private non-profit hospital. Ott's questionnaire had four hypothetical cases in which a DNR decision would probably be made with three questions about whose opinion would most support patient autonomy and whose opinion would actually be regarded as the most appropriate for making the DNR decision. Seventy per cent of perceptions of the person whose decision would be best able to support the patient's autonomy in the DNR decision and 51% of the people perceived to actually be deemed most appropriate to make the DNR decision were consistent with Ott's DNR Decision Model.
Collapse
|
24
|
[Cutaneous lesions in the orofaciodigital syndrome]. ANNALES DE PEDIATRIE 1992; 39:449-52. [PMID: 1416667] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
The term OFD syndrome designates a group of heterogeneous clinical patterns of which seven different types have been described. Type I, or Papillon Léage syndrome, is the most common pattern and the only type in which skin lesions occur. Type I OFD is a sex-linked dominant disorder. Two cases of OFD Type I with cystic lesions of the face are reported herein. The second patient also had polycystic kidneys. This combination has already been reported previously and all children with OFD should be investigated for polycystic kidney disease.
Collapse
|
25
|
[The value of biopsy of the accessory labial salivary glands for the diagnosis of amylosis]. REVUE DE STOMATOLOGIE ET DE CHIRURGIE MAXILLO-FACIALE 1992; 93:54-7. [PMID: 1371889] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 03/25/2023]
Abstract
Diagnosis of amyloidosis depends on the demonstration of amyloid deposits in biopsies using specific stains. Recently, in addition to classical biopsies (kidney, liver, gum, skin, rectal mucosa), labial salivary gland biopsy has been recommended as safe diagnostic method. In our recruitment, it allowed the fortuitous discovery of amyloidosis in three patients suffering from rheumatoid polyarthritis or spondylarthritis. In five other patients (2 cases of familial amyloidosis, 1 dysglobulinemia, 2 primary cardiac amyloidosis), biopsy was performed for systematic search of amyloidosis. In five of these eight cases, a sicca syndrome was associated with the salivary deposits. These deposits were stained with congo red viewed in polarized light and with T thioflavine. Besides, Wright's method allowed to know the AL or AA type of amyloidosis and thus to guide the treatment. On the whole, labial salivary gland biopsy is a highly sensitive method for diagnosis of primary and secondary amyloidosis.
Collapse
|
26
|
A promising new use for UV light. RN 1990; 53:72-4. [PMID: 2267513] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|
27
|
Holographic interferometry of polarized and loaded metallic electrodes in aqueous solution. APPLIED OPTICS 1990; 29:1867-1868. [PMID: 20563098 DOI: 10.1364/ao.29.001867] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
A fundamental study of the effect of microscopic deformation on the corrosion behavior of a molybdenum electrode in 0. 75-N KCl solution has been conducted.
Collapse
|