Potentially toxic elements in commonly consumed fish species from the western Mediterranean Sea (Almería Bay): Bioaccumulation in liver and muscle tissues in relation to biometric parameters

Marine pollution is one of today's most relevant problems. Public awareness has been raised about the harmful potential of heavy metals (HMs) accumulating in edible fish and possibly ending up in human diet through the food chain. This study aimed to characterize and evaluate As, Cd, Cr, Cu, Ni and Pb contents in four edible fish species from the western Mediterranean Sea. Liver and muscle toxic elements were determined by GF-AAS in Mullus surmuletus, Merluccius merluccius, Auxis rochei and Scomber japonicus from Almería Bay (Spain). Muscular composition, biometrics and trophic levels were also determined. The mean PTE concentration levels (mg kg^-1, DW) in fish muscle tissue were: As (2.90-53.74), Cd (0.01-0.18), Cr (0.53-2.01), Cu (0.78-6.93), Ni (0.06-0.24), Pb (0.0-0.32). These concentrations did not exceed the maximum limits set by European legislation (Commission Regulation (EC) No. 1881/2006) for the intake of these marine species. Accumulation of toxic elements tends to be seen in the liver (As (7.31-26.77), Cd (0.11-8.59), Cr (0.21-2.94), Cu (2.64-16.90), Ni (0.16-1.03), Pb (0.0-0.99)). As was the element at highest risk in this Mediterranean region, especially due to red mullet values in muscle. The high As contents with living habits as benthic species that feed near the coast. HMs, especially muscle Cd contents, were associated with higher contents of lipids and organic matter, and bigger specimen size (length and weight), while As was linked to higher fish protein content. However, these relationships between potentially toxic elements (PTE) and biometric indices and body composition parameters depend on species. Finally, the THQ indices indicated that eating fish from Almería Bay poses no human health risk despite pollution from the Almería coastline.

Sublethal and chronic effects of reclaimed water on aquatic organisms. Looking for relationships between physico-chemical characterisation and toxic effects

The use of reclaimed water for irrigation and aquaculture purposes is generally considered a reliable alternative for sustainable water management in regions with water scarcity. Many organic compounds, generally called compounds of emerging concern (CECs), have been detected in reclaimed water, which implies continuous exposure for aquatic organisms. To date no quality criteria have been proposed for this group of compounds. This work aims to assess the acute, sublethal and chronic effects of reclaimed water using two representative organisms of the aquatic compartment; the green alga Chlorella vulgaris and the microcrustacean Daphnia magna. The study comprises the 72 h-algal growth inhibition test, the D. magna feeding bioassay and the D. magna reproduction test. The results highlighted, for the selected characterised compounds, no differences in the concentrations between the different tertiary WWTP treatments, except for the particular case of carbamazepine. Considering seasonality, no differences were observed between the two different sample collection campaigns. The sublethal and chronic effects observed for these samples could not be explained by the lower concentrations found in the chemical characterisation. However, in the majority of cases, dilution of raw reclaimed water reduced the toxic effects of these samples. Several interactions among compounds can affect the mixture's toxicity. Canonical correlation analyses (CCA) were included to explore the potential relationships between the physico-chemical characterisation of reclaimed water and effects on aquatic organisms. The results corroborated the toxic effect of some pharmaceuticals, in particular beta-blockers and antibiotics, on the growth and yield of green algae, as well as inhibition of daphnia reproduction. Thus the CCA methods could help to elucidate the potential relationships between the physico-chemical characterisation and toxic effects by considering all the potential interactions.

Mercury contents in relation to biometrics and proximal composition and nutritional levels of fish eaten from the Western Mediterranean Sea (Almería bay)

Total liver and muscle mercury, and muscular composition, biometrics and trophic levels, were determined in four species (Mullus surmuletus, Merluccius merluccius, Auxis rochei and Scomber japonicus) of the Mediterranean Sea (Almería Bay, Spain). Mercury levels did not exceed the maximum residue limit, and M. merluccius obtained the highest level in muscle. Considerable variations in Hg content among individuals were observed in non-gregarious species. A positive correlation between Hg and trophic level or length was found in muscle, but not in liver. Organs (liver or muscle) with major Hg accumulation depend on species; muscle in M. merluccius and liver in S. japonicus. The results indicate that Hg levels in fish depend on intra- and interspecies factors that should be taken into account in systems to monitor Hg levels.

Optimal conditions for flexible methane production in a demand-based operation of biogas plants

The aim of the presented work was to study the methane production limits and to determine optimal conditions for flexible operation of an anaerobic reactor in order to set up an operational strategy. Punctual overloads were conducted in a laboratory-scale anaerobic reactor with readily biodegradable solid substrates, and the influences of overload intensity, baseload value and substrate used were investigated. A maximal daily value around 1000mL/L of reactor for methane production has been assessed. This value did not evolve significantly during experiment time, and conditioned the persistence of overloads as well as the flexibility margin on the reactor, which ranged from +25% to +140% on daily production. Results highlighted the fact that for a maximum flexibility, low organic loading rates are better to work with on this type of reactors.

Comparison of the mesophilic and thermophilic anaerobic digestion of spent cow bedding in leach-bed reactors

Anaerobic digestion of spent cow bedding in batch leach-bed reactors (LBRs) was compared in mesophilic and thermophilic conditions for the first time. Results show that the use of thermophilic conditions enhanced only the degradation kinetics of easily-degradable matter during the first days of the digestion, whereas similar methane yields (80% of the Biomethane Potential) were reached after 42days at both temperatures. Therefore, the anaerobic digestion in LBRs of spent cow bedding, a substrate rich in slowly-degradable compounds, was not improved in term of methane production considering the overall digestion time. Moreover, the high initial biogas production rate in thermophilic reactors was found to significantly reduce the energetic performance of the cogeneration unit at industrial scale, leading to a 5.9% decrease in the annual electricity production when compared to a mesophilic one.

Leachate flush strategies for managing volatile fatty acids accumulation in leach-bed reactors

In anaerobic leach-bed reactors (LBRs) co-digesting an easily- and a slowly-degradable substrate, the importance of the leachate flush both on extracting volatile fatty acids (VFAs) at the beginning of newly-started batches and on their consumption in mature reactors was tested. Regarding VFA extraction three leachate flush-rate conditions were studied: 0.5, 1 and 2Lkg^-1TSd^-1. Results showed that increasing the leachate flush-rate during the acidification phase is essential to increase degradation kinetics. After this initial phase, leachate injection is less important and the flush-rate could be reduced. The injection in mature reactors of leachate with an acetic acid concentration of 5 or 10gL^-1 showed that for an optimized VFA consumption in LBRs, VFAs should be provided straight after the methane production peak in order to profit from a higher methanogenic activity, and every 6-7h to maintain a high biogas production rate.

Mesophilic anaerobic digestion of several types of spent livestock bedding in a batch leach-bed reactor: substrate characterization and process performance

Spent animal bedding is a valuable resource for green energy production in rural areas. The properties of six types of spent bedding collected from deep-litter stables, housing either sheeps, goats, horses or cows, were compared and their anaerobic digestion in a batch Leach-Bed Reactor (LBR) was assessed. Spent horse bedding, when compared to all the other types, appeared to differ the most due to a greater amount of straw added to the litter and a more frequent litter change. Total solids content appeared to vary significantly from one bedding type to another, with consequent impact on the methane produced from the raw substrate. However, all the types of spent bedding had similar VS/TS (82.3-88.9)%, a C/N well-suited to anaerobic digestion (20-28, except that of the horse, 42) and their BMPs were in a narrow range (192-239NmLCH₄/gVS). The anaerobic digestion in each LBR was stable and the pH always remained higher than 6.6 regardless of the type of bedding. In contrast to all the other substrates, spent goat bedding showed a stronger acidification resulting in a methane production lag phase. Finally, spent bedding of different origins reached, on average, (89±11)% of their BMP after 60days of operation. This means that this waste is well-suited for treatment in LBRs and that this is a promising process to recover energy from dry agricultural waste.

Treatment of the biodegradable fraction of used disposable diapers by co-digestion with waste activated sludge

The results presented in this paper are part of a project aimed at designing an original solution for the treatment of used disposable diapers permitting the recycling of materials and the recovery of energy. Diapers must be collected separately at source and transported to an industrial facility to undergo special treatment which makes it possible to separate plastics and to recover a biodegradable fraction (BFD) made up mainly of cellulose. The methane yield of BFD was measured and found to be 280 ml CH4/g VSfed on average. 150 kg of dry BFD can be retrieved from the treatment of one ton of used disposable diapers, representing an energy potential of about 400 kW h of total energy or 130 kW h of electricity. As the treatment process for used diapers requires very high volumes of water, the setting up of the diaper treatment facility at a wastewater treatment plant already equipped with an anaerobic digester offers the advantages of optimizing water use as well as its further treatment and, also, the anaerobic digestion of BFD. The lab-scale experiments in a SBR showed that BFD co-digestion with sewage sludge (38% BFD and 62% waste activated sludge on volatile solids basis) was feasible. However, special attention should be paid to problems that might arise from the addition of BFD to a digester treating WAS such as insufficient mixing or floating particles leading to the accumulation of untreated solids in the digester.

Effect of the addition of fatty by-products from the refining of vegetable oil on methane production in co-digestion

The purpose of this work was to investigate the effects of the addition of by-products from the refining of vegetable oil on the behavior of co-digestion reactors treating a mixture of grass, cow dung and fruit and vegetable waste. Three by-products were used: one soapstock, one used winterization earth and one skimming of aeroflotation of the effluents. Three 15 l reactors were run in parallel and fed five times a week. In a first phase of 4 weeks, the three reactors were fed with the co-digestion substrates alone (grass, cow dung and fruit and vegetable waste) at an organic loading rate (OLR) of 1.5 g VS/kg d (VS: volatile solids). Then, a different by-product from the refining of oil was added to the feed of each reactor at an OLR of 0.5 g VS/kg d, generating a 33% increase in the OLR. The results show that the addition of by-products from the refining of oil is an efficient way of increasing the methane production of co-digestion reactors thanks to high methane yield of such by-products (0.69-0.77 l CH(4)/g VS loaded). In fact, in this work, it was possible to raise the methane production of the reactors by about 60% through a 33% increase in the OLR thanks to the addition of the by-products from the refining of vegetable oil.

Slaughterhouse fatty waste saponification to increase biogas yield

A thermochemical pretreatment, i.e. saponification, was optimised in order to improve anaerobic biodegradation of slaughterhouse wastes such as aeroflotation grease and flesh fats from cattle carcass. Anaerobic digestion of raw wastes, as well as of wastes saponified at different temperatures (60 degrees C, 120 degrees C and 150 degrees C) was conducted in fed-batch reactors under mesophilic condition and the effect of different saponification temperatures on anaerobic biodegradation and on the long-chain fatty acids (LCFAs) relative composition was assessed. Even after increasing loads over a long period of time, raw fatty wastes were biodegraded slowly and the biogas potentials were lower than those of theoretical estimations. In contrast, pretreated wastes exhibited improved batch biodegradation, indicating a better initial bio-availability, particularly obvious for carcass wastes. However, LCFA relative composition was not significantly altered by the pretreatment. Consequently, the enhanced biodegradation should be attributed to an increased initial bio-availability of fatty wastes without any modification of their long chain structure which remained slowly biodegradable. Finally, saponification at 120 degrees C achieved best performances during anaerobic digestion of slaughterhouse wastes.

Treatment of fatty solid waste from the meat industry in an anaerobic sequencing batch reactor: start-up period and establishment of the design criteria

An anaerobic sequencing batch reactor (AnSBR) was used to treat the dissolved air flotation skimmings from a cooked pork meat plant. During the start-up period, the reactor was operated in fed-batch mode for 25 days and 7 batches were treated. The SBR was inoculated with sludge taken from a reactor treating distillery vinasse. The results showed that this kind of sludge is a very good source of inoculum for digesters treating residues with a high content in fats and long-chain fatty acids because it was able to adapt very rapidly to the new substrate and, from the second batch on, the sludge was already able to metabolize the fatty residue at quite high rates. The AnSBR was then operated with 5 batches per week for 110 days and the quantity of VS added per batch was regularly increased until the maximum treatment capacity of the reactor (i.e. maximum loading rate) was reached. The maximum organic loading rates were found to be 0.16 g VS/g VSS d, or 0.224 g VS/g VSS.batch when the reactor is fed 5 times a week. The biodegradability of the skimmings was very high, with more than 97% of TS removal, and the methane production was 880+/-90 mL of methane/g of VS(added).

Anaerobic digestion of gelatinous water at laboratory and pilot scale and nitrogen inhibition

The anaerobic digestion of the liquid residue (gelatinous water) coming from the production of fat from animal residue, was studied at laboratory and pilot scale. Biodegradability (>98%) and biogas potential (675 mL of biogas/g of COD(applied)) of this wastewater are very high. However, due to the high content on nitrogen, an inhibition of the anaerobic activity was observed for quite low concentrations of N-NH(3). Dilution of the wastewater and pH regulation in the reactor around 7.3 are the 2 solutions which were investigated to overcome the nitrogen inhibition at industrial scale. These two solutions were validated at laboratory scale in an anaerobic SBR and then onsite at pilot scale in a continuous reactor. A stable anaerobic digestion was observed in both reactors showing that no nitrogen inhibition was obtained when N-NH(3) concentration in the reactor was kept low.

Experimental and modeling investigations of a hybrid upflow anaerobic sludge-filter bed (UASFB) reactor

A 9.8-L hybrid UASFB reactor, in which the lower half was occupied by a sludge blanket and the upper half by small floating polyethylene media, was evaluated using wine distillery vinasse as substrate. The reactor was operated for a total period of 232 days at 33 + 1 degrees C. Continuous feeding of the reactor was started with an initial OLR of 2.9 g COD/L.d and then it was increased step wise to 19.5 g COD/L.d by increasing the feed COD, while maintaining a constant HRT (1.05 d). The reactor was equipped with a continuous internal recirculation system from top to the bottom at the rate of 9 L/h (upflow velocity = 0.83 m/h) upto day 159 and then it was reduced to about half on day 160 onwards. It was observed that the reduced recirculation rate did not affect the performance of the reactor with an average COD(t) and COD(s) removal efficiencies of 82 and 88%, respectively. A maximum gas production rate of 6.7 L CH(4)/L(reactor).d was achieved for the highest OLR applied. The specific activity analysis depicts that the activity of the attached biomass was more than 2 times higher than that of the granular sludge. The efficiency of liquid mixing was good through out this study. The packing medium had a dual role in the retention of the biomass inside the reactor: i.e. entrapment of biomass within the support and filtration of the granular biomass, preventing it from going out of the reactor. ADM1_10 model simulated well the dynamic evolutions of the main variables in the liquid as well as in the gas phases.

Anaerobic digestion of residues from production and refining of vegetable oils as an alternative to conventional solutions

The purpose of this work was to study the anaerobic digestion of by-products generated during the production and refining of oil with the objective of proposing an alternative solution (methanisation) to the conventional solutions while reducing the energy consumption of fossil origin on refinery sites. The production of sunflower oil was taken as example. Glycerine from the production of biodiesel was also included in this study. The results show that glycerine has a high potential for methanisation because of its high methane potential (465 ml CH4/g VS) and high metabolization rates (0.42 g VS/g VSS.d). The use of oil cake as substrate for anaerobic digestion is not interesting because it has a low methane potential of 215 ml CH4/g VS only and because it is easily recovered in animal feed. Six residues have quite a high methane potential (465 to 850 ml CH4/g VS) indicating a good potential for anaerobic digestion. However, they contain a mixture of rapidly and slowly biodegradable organic matter and the loading rates must remain quite low (0.03 to 0.09 g VS/g VSS.d) to prevent any accumulation of slowly biodegradable solids in the digesters.

Impact of increasing NaCl concentrations on the performance and community composition of two anaerobic reactors

The anaerobic treatment of saline effluents using halophilic and halotolerant microbial consortia is of major interest. Inhibition of anaerobic digestion is known to occur at high salt content. However, it seems that the suitable adaptation of an anaerobic sludge makes possible the treatment of saline wastewater. In this study, a non-saline anaerobic sludge was inoculated in two anaerobic batch reactors operating with a different substrate (distillery vinasse and ethanol) and subjected to increasing NaCl concentrations. The performance of the digesters appeared to be highly dependent on the nature of the substrate, and a similar level of inhibition (i.e. around 90% of the specific loading rate and specific methanogenic activity) was stated at 10 g l(-1) of NaCl with distillery vinasse and 60 g l(-1) of NaCl with ethanol. The characterization of the microflora and its adaptation to increasing NaCl conditions were also investigated using molecular tools based on the analysis of genomic 16S rDNA. The microbial communities revealed a high diversity that could be maintained in both reactors despite the increase in NaCl concentrations.

Treatment of distillery vinasse in a high rate anaerobic reactor using low density polyethylene supports

An anaerobic fixed bed reactor, filled with small floating supports of polyethylene material (Bioflow 30) as inert media, was operated for 6 months to treat vinasse (wine residue after distillation). Bioflow 30 has a density of 0.93 and a specific area of 320 m2/m3. The experimental results showed that the efficiency of the reactor in removal of soluble COD was very good with a maximum organic loading rate of more than 30 g of COD/L x d and a COD removal efficiency of more than 80%. Bioflow 30 showed a high capability of biomass retention with 4-6 g of dried solids per support. Thus, at the end of the experiment, the fixed biomass represented 57 g of solids/L of reactor. The visual observation of the supports and the specific activity (0.54 g COD/g solids x d) of the fixed solids, which remained close to the values obtained with suspended biomass, showed that entrapment was playing an important role in the retention of the biomass inside the reactor. It was then possible to operate the reactor with a very high loading rate as the result of the increase of the solids in the reactor and the maintaining of the specific activity. Bioflow 30 is then an excellent support for use in a high rate anaerobic fixed bed.

Characterization of the activated sludge and of the operating conditions of six SBR treating dairy effluent and operated at industrial scale

The sludge from six SBRs treating dairy effluent and located at same geographical location, in North East of France, were collected to study their characteristic behavior. The six plants were designed and constructed by the same manufacturer and are working under quite similar operating conditions. The objective of the study was to observe if any similarity existed in the characteristics of the sludge collected from the SBRs. The sludge was characterized for morphological properties (filament index, floc size), settling, compressibility, suspended solids (SS) concentration. The sludge from each plant was different from the others in most of the characteristics. One sludge out of six (sludge G) was completely different from the others with a very degraded structure and low discrete settling and compression. This reactor was not working fully satisfactorily with a too high COD at outlet, probably because this SBR was undergoing repetitive overloading linked to a very bad recovery of the whey by the cheese maker. The five other SBRs were working fully satisfactorily but the characteristics of the five sludges were quite different from one sludge to another. The size of the flocs seemed to be the only parameter measured which could be correlated to the settling characteristics of the sludge. The sludge characteristics and the parameter correlations were also compared with that of municipal activated sludge and were found to be very different.

Anaerobic digestion of tannery soak liquor with an aerobic post-treatment

The leather industry occupies a place of prominence in the Indian economy due to its massive potential for employment, growth and exports. The potential environmental impact of tanning is significant. This study focuses on tannery soak liquor, generated by the soaking of hides and skins, which is characterised by high organic load and high salinity. For these reasons, the soak liquor should be segregated and pre-treated separately before being mixed with the composite wastewater, made of all other streams mixed together. The anaerobic digestion of tannery soak liquor was studied using a UASB. COD removal reached 78% at an OLR of 0.5 kg COD m(-3) d(-1), a HRT of 5 days and a TDS concentration of 71 gl(-1). The combination of the UASB with an aerobic post-treatment enhanced the performance of the overall wastewater treatment process and the COD removal efficiency of the combined anaerobic/aerobic treatment system reached 96%. However, for effective operation, the system had to be operated at very low OLRs, which affects the economic viability of such a process.

Halophilic biological treatment of tannery soak liquor in a sequencing batch reactor

Hypersaline wastewater (i.e. wastewater containing more than 35 gl(-1) total dissolved solids (TDS)) is generated by various industrial activities. This wastewater, rich in both organic matter and TDS, is difficult to treat using conventional biological wastewater treatment processes. Among the industries generating hypersaline effluents, tanneries are prominent in India. In this study, tannery wastewater from soak pit was treated in a lab-scale SBR for the removal of organic matter. The characterisation of the soak liquor showed that this effluent is biodegradable, though not easily, and highly variable, depending on the origin and the nature of the hides. TDS was in the range of 21-57 gl(-1) and COD was in the range of 1.5-3.6 gl(-1). This soak liquor was biologically treated in an aerobic sequencing batch reactor seeded with halophilic bacteria, and the performance of the system was evaluated under different operating conditions with changes in hydraulic retention time, organic loading rate and salt concentration. The changes in salinity appeared to affect the removal of organic matter more than the changes in hydraulic retention time or organic loading rate. Despite the variations in the characteristics of the soak liquor, the reactor achieved proper removal of organic matter, once the acclimation of the microorganisms was achieved. Optimum removal efficiencies of 95%, 93%, 96% and 92% on COD, PO4 3-, TKN and SS, respectively, could be reached with 5 days hydraulic retention time (HRT), an organic loading rate (OLR) of 0.6 kg COD m(-3)d(-1) and 34 g NaCl l(-1). The organisms responsible for nitrogen removal appeared to be the most sensitive to the modifications of these parameters.

Microbial monitoring by molecular tools of a two-phase anaerobic bioreactor treating fruit and vegetable wastes

Microbial consortia in a two-phase, anaerobic bioreactor using a mixture of fruit and vegetable wastes were established. Bacterial and archaeal communities obtained by a culture-independent approach based on single strand conformation polymorphism analysis of total 16S rDNA showed the adaptation of the microflora to the process parameters. Throughout the 90 d of the study, the species composition of the bacterial community changed significantly. Bacterial 16S rDNA showed at least 7 different major species with a very prominent one corresponding to a Megasphaera elsdenii whereas bacterial 16S rDNA of a methanization bioreactor showed 10 different major species. After two weeks, Prevotella ruminicola became major and its dominance increased continuously until day 50. After an acid shock at pH 5, the 16S rDNA archaeal patterns in the acidogenic reactor showed two major prominent species corresponding to Methanosphaera stadtmanii and Methanobrevibacter wolinii, a hydrogenotrophic bacterium.

Improving the biological nitrogen removal process in pharmaceutical wastewater treatment plants: a case study

The Biological Nitrogen Removal (BNR) process of some pharmaceutical wastewater treatment plants has important operational problems. This study shows that, in order to solve these problems, the design of industrial BNR processes should start by analysing three key parameters: the characteristics of the wastewater load, the determination of the maximum TKN removal rate and the detection of toxic or inhibitory compounds in the wastewater. A case study of this analysis in pharmaceutical wastewater is presented here. In this case, the conventional TKN analytical method does not make an accurate characterisation of the wastewater load because it measures a concentration of 100 mg TKN l(-1) whereas the real concentration, determined with a modified TKN analytical method, is 150-500 mg TKN l(-1). Also, the TKN removal of the treatment system is insufficient in some periods because it falls below legal requirements. This problem might be a consequence of the wrong characterisation of wastewater during the design process. The maximum TKN removal at 27 degrees C (24 mg N g VSS(-1) d(-1) or 197 mg N l(-1) d(-1)) was evaluated in a pilot-scale plant. This value is six times greater than the average NLR applied in the full-scale plant. Finally, some of the components of the wastewater, such as p-phenylenediamine, might have inhibitory or toxic effects on the biological process. P-phenylenediamine causes a large decrease in the nitrification rate. This effect was determined by respirometry. This methodology shows that the effect is mainly inhibitory with a contact time of 30 min and if the contact time is longer, 14 hours, a toxic effect is observed.

Use of an anaerobic sequencing batch reactor for parameter estimation in modelling of anaerobic digestion

The model structure in anaerobic digestion has been clarified following publication of the IWA Anaerobic Digestion Model No. 1 (ADM1). However, parameter values are not well known, and uncertainty and variability in the parameter values given is almost unknown. Additionally, platforms for identification of parameters, namely continuous-flow laboratory digesters, and batch tests suffer from disadvantages such as long run times, and difficulty in defining initial conditions, respectively. Anaerobic sequencing batch reactors (ASBRs) are sequenced into fill-react-settle-decant phases, and offer promising possibilities for estimation of parameters, as they are by nature, dynamic in behaviour, and allow repeatable behaviour to establish initial conditions, and evaluate parameters. In this study, we estimated parameters describing winery wastewater (most COD as ethanol) degradation using data from sequencing operation, and validated these parameters using unsequenced pulses of ethanol and acetate. The model used was the ADM1, with an extension for ethanol degradation. Parameter confidence spaces were found by non-linear, correlated analysis of the two main Monod parameters; maximum uptake rate (k(m)), and half saturation concentration (K(S)). These parameters could be estimated together using only the measured acetate concentration (20 points per cycle). From interpolating the single cycle acetate data to multiple cycles, we estimate that a practical "optimal" identifiability could be achieved after two cycles for the acetate parameters, and three cycles for the ethanol parameters. The parameters found performed well in the short term, and represented the pulses of acetate and ethanol (within 4 days of the winery-fed cycles) very well. The main discrepancy was poor prediction of pH dynamics, which could be due to an unidentified buffer with an overall influence the same as a weak base (possibly CaCO3). Based on this work, ASBR systems are effective for parameter estimation, especially for comparative wastewater characterisation. The main disadvantages are heavy computational requirements for multiple cycles, and difficulty in establishing the correct biomass concentration in the reactor, though the last is also a disadvantage for continuous fixed film reactors, and especially, batch tests.

High COD wastewater treatment in an aerobic SBR: treatment of effluent from a small farm goat's cheese dairy

In France, small goat's cheese dairies using traditional craft methods often have no profitable solution for dealing with the whey byproduct of their cheesemaking activity: it is usually mixed with the cleaning wastewater which, in the absence of other possibilities, is then discharged directly into the environment. The volume of such wastewater is small but it has a high COD of around 12-15 g/L. An aerobic SBR was proposed as a method for treating the mixture of wastewater and whey and the first installation was set up on a farm with 170 goats. Its operations were monitored for 7.5 months, particularly in order to measure any excess volume of sludge and to check that such excess remained within acceptable limits, given the high COD of the effluent requiring treatment. The results obtained show that the treated wastewater was of excellent quality, well within the most rigorous discharge norms. With this type of wastewater, excess sludge was produced in only very low amounts with 0.2 g of SS/g of COD. Moreover, the sludge proved to be quick settling which made it possible to: i) maintain a high level of SS in the reactor (up to 15 g/L); ii) withdraw sludge with concentrations reaching 30 g/L after 2 hours of settling. This resulted in a low volume of excess sludge (less than 5% of treated volume), making such aerobic biological treatment in an SBR competitive when compared to the straightforward spreading of all the wastewater.

Anaerobic biodegradability of water separated from extracted crude oil

A study of the anaerobic biodegradability of the three categories of water separated from extracted crude oil (Venezuelan oilfields)--light, medium or heavy crude--was carried out at laboratory scale using UASB reactors working at mesophilic conditions. Chemical oxygen demand (COD) removal in a low loaded UASB reactor fed with water separated from extracted light crude was high, with an average 87% purification efficiency. The remaining COD was made up of the nonbiodegradable and the very slowly biodegradable fractions of the organic matter in the water. During a second period, the hydraulic retention time was reduced in stages, thus increasing the loading rate. In the experimental conditions used, COD concentration at the outlet remained below the Venezuelan standard limit for discharge into the environment (350 mg COD l(-1)) when the hydraulic retention time (HRT) was above 10 hours and the OLR under 3 g COD l(-1) d(-1). For HRT less than 10 hours, or organic loading rate (OLR) greater than 3 g COD l(-1) d(-1), COD at the outlet of the reactor rose as a consequence both of increased volatile fatty acids (VFA) concentrations (indicating an overloading of the methanogenic population) and, also, of the increase in the non-VFA COD (indicating a decrease in the acidification efficiency). On the other hand, results with UASB reactors operated at a low loading rate and fed with water separated from extracted medium and heavy crude oil showed that purification efficiency was low, with only 20% and 37% COD removal respectively. Continuing the operation of the UASB reactor fed with water separated from medium oil over a prolonged period did not bring any improvement, indicating that no adaptation of the sludge occurred.

Treatment of winery wastewater by an anaerobic sequencing batch reactor

Treatment of winery wastewater was investigated using an anaerobic sequencing batch reactor (ASBR). Biogas production rate was monitored and permitted the automation of the bioreactor by a simple control system. The reactor was operated at an organic loading rate (ORL) around 8.6 gCOD/L.d with soluble chemical oxygen demand (COD) removal efficiency greater than 98%, hydraulic retention time (HRT) of 2.2 d and a specific organic loading rate (SOLR) of 0.96 gCOD/gVSS.d. The kinetics of COD and VFA removal were investigated for winery wastewater and for simple compounds such as ethanol, which is a major component of winery effluent, and acetate, which is the main volatile fatty acid (VFA) produced. The comparison of the profiles obtained with the 3 substrates shows that, overall, the acidification of the organic matter and the methanisation of the VFA follow zero order reactions, in the operating conditions of our study. The effect on the gas production rate resulted in two level periods separated by a sharp break when the acidification stage was finished and only the breaking down of the VFA continued.

The anaerobic SBR process: basic principles for design and automation

This study has determined the purification performance and the basic principles for the design of an anaerobic SBR (ASBR) to be used to treat wastewater generated in the food industries. Two ASBR's were set up and one fed with a slaughterhouse effluent at low concentration, the other with concentrated dairy wastewater. The maximum loading rate applied should not exceed 4.5 g of COD/L/day for the dilute effluent and 6 g of COD/L/day for the concentrated effluent. At higher loading rates, the reactors become difficult to operate, mainly because of sludge removal problems, and purification efficiency declines. A detailed study of the kinetics (TOC, VFA, rate of biogas production) throughout one treatment cycle led to the development of a simple control strategy based on the monitoring of the biogas production rate which was then applied to the reactor treating the dairy wastewater. After automation, the reactor worked free of problems at an average pollution load of 5.4 g of COD/L/day.

The SBR process: an efficient and economic solution for the treatment of wastewater at small cheesemaking dairies in the Jura mountains

The small cheesemaking plants in the Jura Mountains (N.E. France) need self-contained solutions for treating their wastewater. Any solution must suit the characteristics of the effluent produced by these small production units and be simple, robust and financially feasible in regard to both capital and running costs. Given this context, a technique based on an SBR was recommended and the operations of the first treatment plant established on an industrial scale, monitored for the first year, with particular attention paid to operating constraints. The results obtained show that the SBR is, from a technical point of view, perfectly adapted to treating cheese production wastewater, with purification levels at 97.7% for total COD and 99.8% for BOD5. In the course of this study, it has been shown that the SBR process, thanks to its simple design and operation, can easily be run by the cheesemaker who will need to devote a minimum of time to it. Furthermore, with treatment costs of around 2 centimes (0.33 US cent) per litre of milk delivered, the SBR process meets perfectly both the technical and financial conditions for treatment as laid down by the Federation of Cooperatives of the Doubs and Jura départements.

Investigations on the changes in anaerobic biodegradability and biotoxicity of an industrial microbial biomass induced by a thermochemical pretreatment

In the anaerobic digestion of solid wastes, hydrolysis is the rate limiting step and physicochemical pretreatment is often required to promote solubilization of organic matter. As an illustration, anaerobic digestion was limited by the substrate solubilization step during continuous cultures performed with an industrial microbial biomass. In optimal operating conditions determined for the hydrolysis-acidogenesis step (T = 35 degrees C; pH = 8.5; OLR = 5.4 g COD/l.d) 50.6% COD solubilization was achieved. A thermochemical pretreatment based on sodium hydroxide addition, was used in order to enhance COD solubilization. Optimal conditions for COD solubilization were pH = 12, T = 140 degrees C for 30 minutes. In these conditions, 70% COD solubilization was achieved. However, anaerobic biodegradability of the pretreated substrate was not improved and remained near 40%. The poor anaerobic biodegradability performances were attributed to the soluble molecules generated during the thermochemical pretreatment that were refractory and/or inhibitory to anaerobic microorganisms. Fractionation of the soluble pretreated microbial biomass by two methods (treatment with adsorbent resins and precipitation by pH adjustment) demonstrated that high molecular weight compounds (> 100 kDa) are involved in the poor biodegradability and in the biotoxicity observed. Partial decolorization through resin use and acid precipitation remove these compounds. The consequence of their removal was an increase of the production of biogas.