An experimental bioactive dental ceramic for metal-ceramic restorations: Textural characteristics and investigation of the mechanical properties

The aim of this study was the evaluation of the textural characteristics of an experimental sol-gel derived feldspathic dental ceramic, which has already been proven bioactive and the investigation of its flexural strength through Weibull Statistical Analysis. The null hypothesis was that the flexural strength of the experimental and the commercial dental ceramic would be of the same order, resulting in a dental ceramic with apatite forming ability and adequate mechanical integrity. Although the flexural strength of the experimental ceramics was not statistically significant different compared to the commercial one, the amount of blind pores due to processing was greater. The textural characteristics of the experimental ceramic were in accordance with the standard low porosity levels reported for dental ceramics used for fixed prosthetic restorations. Feldspathic dental ceramics with typical textural characteristics and advanced mechanical properties as well as enhanced apatite forming ability can be synthesized through the sol-gel method.

Efficiency of different decalcification protocols for nasal osseous structures in a rat experimental model of allergic rhinitis, and their effects on epithelial histology: an attempt at standardization

INTRODUCTION

Decalcification of osseous specimens is required for histological analysis; this however may cause tissue damage. In rodent models of allergic rhinitis (AR), epithelial histologic assessment necessitates prior decalcification of the nasal osseous structures. However, respiratory epithelium is highly susceptible to damage, and rat nasal architecture is elaborate and its sectioning is challenging. Nevertheless, decalcification is not standardized in experimental AR. We therefore undertook this task, in order to reduce experimental bias.

METHODS

Six-to-eight week-old Wistar rats underwent an AR protocol. Subsequently, nasal structures were decalcified in the following mediums: (i) formic acid 10% for 5 and 20 days; (ii) formic acid 15% for 5 and 15 days; (iii) Morse Solution for 5 and 20 days and (iv) EDTA for 20 and 40 days. Decalcification efficiency/speed was evaluated via radiographic analysis. Furthermore, specimens were stained with hematoxylin and eosin and assessed for preservation of epithelial features.

RESULTS

Specimens were appropriately decalcified in 5 days in the formic acid-based mediums and in 20 days in EDTA with minimal epithelial damage. EDTA for 40 days had no unacceptable adverse effects; conversely, 15 and/or 20 days in acid-based agents provided no extra benefit for decalcification and were detrimental to the epithelium.

CONCLUSIONS

EDTA treatment for 20 days is appropriate for decalcification of nasal structures in rat models of allergic rhinitis; further incubation preserves epithelial integrity but is not required. When urgency is a factor, formic-acid-based decalcification for 5 days yields acceptable results.

The effect of type of restoration on the stress field developed in terminal abutments with severely reduced periodontal support and coronal structure

STATEMENT OF PROBLEM

Periodontally compromised teeth (PCT) that serve as terminal abutments (TAs) are often challenging depending on the post-and-core treatment, the type of partial fixed dental prosthesis (PFDP), and the periodontal support.

PURPOSE

The purpose of this study was to investigate the biomechanical impact of 3 types of PFDP supported by cast post-and-cores on PCT serving as terminal abutments.

MATERIAL AND METHODS

A 3-dimensional (3D) model of a human mandible was fabricated by using computed tomography (CT) images and parameterized in a computer-aided design (CAD) environment as follows: Right premolar preparation geometries were designed. The second premolar was assembled with 7-mm or 10-mm cast post-and-core models. Both premolar-models were designed to support single, splinted, or 1-unit cantilever splinted crowns. In each situation, their periodontium geometries were designed to be reduced by 10%, 50%, and 70%. All models were imported into a 3D finite element analysis (FEA) environment and loaded; von Mises stress values and distribution patterns were evaluated.

RESULTS

Insertion of the post primarily affected the apical areas of both the root and post; the type of PFDP and periodontal support mainly affected stress distribution. In patients with a normal periodontium, splinting the teeth did not contribute to their stress relief. By extending the post length, a stressful area close to the apex of the post was developed. Splinting mitigated the stress field of the coronal part of the 50% PCT (up to 98.9%); the 30% PCT experienced a substantial decrease (up to 215.9%) in stress in the radical part as well. The increase in the length of the post produced negligible stress-related differences in the apical part of the 50% PCT (0.2% to 2.6%). The use of the 7-mm post effectively relieved the radical part of the splinted 30% PCT. The magnitude of the stress on the radical part of post-restored PCT was considerably increased in the presence of a cantilever.

CONCLUSIONS

Splinted crowns supported by a 7-mm cast post-and-core are a favorable biomechanical approach for the restoration of PCT with severe loss of coronal structure. The use of a cantilever greatly aggravates the biomechanical response, especially of post-restored PCT.

Rumen ciliates of Tokara native goat in Kagoshima, Japan

The composition of rumen ciliate protozoa was surveyed in 15 Tokara native goats, Capra hircus domesticus, inhibiting Kagoshima, Japan. As a result, of 11 species with 3 forms under 5 genera detected, Entodinium simplex, E. nanellum and E. rectangulatum were found in all the animals examined. The large ophryoscolecid ciliates detected were Polyplastron multivesiculatum and Metadinium affine alone, which have been regarded as the typical members of Type A composition proposed by Eadie. Since Tokara native goats have been bred isolated in a small islet for a long time, native goats that had been kept in south Japan might possess Type A fauna. Average ciliate density was 43.9 x 10(4) per 1 ml of rumen fluid. The number of species per host was 8.3 on average. Diversity index was 1.412 on average.