Highly Stretchable Stress-Strain Sensor from Elastomer Nanocomposites with Movable Cross-links and Ketjenblack

Practical applications like very thin stress-strain sensors require high strength, stretchability, and conductivity, simultaneously. One of the approaches is improving the toughness of the stress-strain sensing materials. Polymeric materials with movable cross-links in which the polymer chain penetrates the cavity of cyclodextrin (CD) demonstrate enhanced strength and stretchability, simultaneously. We designed two approaches that utilize elastomer nanocomposites with movable cross-links and carbon filler (ketjenblack, KB). One approach is mixing SC (a single movable cross-network material), a linear polymer (poly(ethyl acrylate), PEA), and KB to obtain their composite. The electrical resistance increases proportionally with tensile strain, leading to the application of this composite as a stress-strain sensor. The responses of this material are stable for over 100 loading and unloading cycles. The other approach is a composite made with KB and a movable cross-network elastomer for knitting dissimilar polymers (KP), where movable cross-links connect the CD-modified polystyrene (PSCD) and PEA. The obtained composite acts as a highly sensitive stress-strain sensor that exhibits an exponential increase in resistance with increasing tensile strain due to the polymer dethreading from the CD rings. The designed preparations of highly repeatable or highly responsive stress-strain sensors with good mechanical properties can help broaden their application in electrical devices.

Multi-energy dissipation mechanisms in supramolecular hydrogels with fast and slow relaxation modes

Reversible cross-links by non-covalent bonds have been widely used to produce supramolecular hydrogels that are both tough and functional. While various supramolecular hydrogels with several kinds of reversible cross-links have been designed for many years, a universal design that would allow control of mechanical and functional properties remains unavailable. The physical properties of reversible cross-links are usually quantified by thermodynamics, dynamics, and bond energies. Herein, we investigated the relationship between the molecular mobility and mechanical toughness of supramolecular hydrogels consisting of two kinetically distinct reversible cross-links via host-guest interactions. The molecular mobility was quantified as the second-order average relaxation time (〈τ〉_w) of the reversible cross-links. We discovered that hydrogels combining fast (〈τ〉_w = 1.8 or 18 s) and slowly (〈τ〉_w = 6.6 × 10³ or 9.5 × 10³ s) reversible cross-links showed increased toughness compared to hydrogels with only one type of cross-link because relaxation processes in the former occurred with wide timescales.

Synergetic improvement in the mechanical properties of polyurethanes with movable crosslinking and hydrogen bonds

Polyurethane (PU) materials with movable crosslinking were prepared by a typical two-step synthetic process using an acetylated γ-cyclodextrin (TAcγCD) diol compound. The soft segment of PU is polytetrahydrofuran (PTHF), and the hard segment consists of hexamethylene diisocyanate (HDI) and 1,3-propylene glycol (POD). The synthesized PU materials exhibited the typical mechanical characteristics of a movable crosslinking network, and the presence of hydrogen bonds from the urethane bonds resulted in a synergistic effect. Two kinds of noncovalent bond crosslinking increased the Young's modulus of the material without affecting its toughness. Fourier transform infrared spectroscopy and X-ray scattering measurements were performed to analyze the effect of introducing movable crosslinking on the internal hydrogen bond and the microphase separation structure of PU, and the results showed that the carbonyl groups on TAcγCD could form hydrogen bonds with the PU chains and that the introduction of movable crosslinking weakened the hydrogen bonds between the hard segments of PU. When stretched, the movable crosslinking of the PU materials suppressed the orientation of polymer chains (shish-kebab orientation) in the tensile direction. The mechanical properties of the movable crosslinked PU materials show promise for future application in the industrial field.

Effect of coordinator-based osteoporosis intervention on quality of life in patients with fragility fractures: a prospective randomized trial

We examined the effects of the coordinator-based intervention on quality of life (QOL) in the aftermath of a fragility fracture, as well as factors predictive of post-fracture QOL. The coordinator-based interventions mitigated the decrease in QOL. Secondary fracture after primary fracture, however, was a significant predictor of lower QOL.

PURPOSE

This study aimed to determine the effects of the coordinator-based intervention on QOL in the aftermath of a fragility fracture, as well as factors predictive of post-fracture QOL, in an Asian population.

METHODS

Patients with new fractures in the intervention group received the coordinator-based intervention by a designated nurse certified as a coordinator, within 3 months of injury. QOL was evaluated using the Japanese version of the EuroQol 5 Dimension 5 Level (EQ-5D-5L) scale  before the fracture (through patient recollections) and at 0.5, 1, and 2 years after the primary fracture.

RESULTS

Data for 141 patients were analyzed: 70 in the liaison intervention (LI) group and 71 in the non-LI group. Significant intervention effects on QOL were observed at 6 months after the fracture; the QOL score was 0.079 points higher in the LI group than in the non-LI group (p=0.019). Further, the LI group reported significantly less pain/discomfort at 2 years after the fracture, compared to the non-LI group (p=0.037). In addition, secondary fractures were found to significantly prevent improvement and maintenance of QOL during the recovery period (p=0.015).

CONCLUSION

Short-term intervention effects were observable 6 months after the primary fracture, with the LI group mitigated the decrease in QOL. Few patients in the LI group reported pain/discomfort 2 years after the fracture, but there is uncertainty regarding its clinical significance. Secondary fracture after initial injury was a significant predictor of lower QOL after a fracture.

Efficiency of coordinator-based osteoporosis intervention in fragility fracture patients: a prospective randomized trial

We examined the effectiveness of coordinators' interventions to prevent secondary fractures in patients with fragility fractures. These coordinator-based interventions improved bone density assessment implementation and treatment rates, and enhanced treatment persistence rates in the early stages following fractures.

INTRODUCTION

This study aimed to determine the efficiency of coordinator-based osteoporosis intervention in fragility fracture patients during a 2-year period.

METHODS

A prospective intervention randomized control study was conducted at seven medical facilities from January 2015 to March 2017. Postmenopausal women and men over 50 years old with fragility fractures were randomly divided into the coordinator intervention (LI; 70 patients) and without intervention (non-LI; 71 patients) groups. The osteoporosis treatment rate, osteoporosis treatment persistence rate, fall rate, fracture incidence rate, and bone density measurement rate 3 months, 6 months, 1 year, and 2 years after registration were compared between the two groups. Non-parametric tests were used to analyze data at each inspection period.

RESULTS

The osteoporosis treatment initiation rate was significantly higher in the LI group than in the non-LI group (85.7% vs. 71.8%; p = 0.04). The LI group had significantly higher bone density assessment implementation rates than the non-LI group at the time of registration (90.0% vs. 69.0%; p = 0.00) and 6 months after registration (50.0% vs. 29.6%; p = 0.01), but not 1 or 2 years after registration. In addition, no significant differences in fall or fracture incidence rates were found between the two groups.

CONCLUSION

The coordinator-based interventions for fragility fractures improved bone density assessment implementation and treatment rates and enhanced treatment persistence rates in the early stages following bone fractures. The findings suggest that liaison intervention may help both fracture and osteoporosis physicians for the evaluation of osteoporosis and initiation and continuation of osteoporosis medication.

Extremely Rapid Self-Healable and Recyclable Supramolecular Materials through Planetary Ball Milling and Host-Guest Interactions

The host-guest interaction as noncovalent bonds can make polymeric materials tough and flexible based on the reversibility property, which is a promising approach to extend the lifetime of polymeric materials. Supramolecular materials with cyclodextrin and adamantane are prepared by mixing host polymers and guest polymers by planetary ball milling. The toughness of the supramolecular materials prepared by ball milling is approximately 2 to 5 times higher than that of supramolecular materials prepared by casting, which is the conventional method. The materials maintain their mechanical properties during repeated ball milling treatments. They are also applicable as self-healable bulk materials and coatings, and they retain the transparency of the substrate. Moreover, fractured pieces of the materials can be re-adhered within 10 min. Dynamic mechanical analysis, thermal property measurements, small-angle X-ray scattering, and microscopy observations reveal these behaviors in detail. Scars formed on the coating disappear within a few seconds at 60 °C. At the same time, the coating shows scratch resistance due to its good mechanical properties. The ball milling method mixes the host polymer and guest polymer at the nano level to achieve the self-healing and recycling properties.

Supramolecular Biocomposite Hydrogels Formed by Cellulose and Host-Guest Polymers Assisted by Calcium Ion Complexes

Hydrogels are biocompatible polymer networks; however, they have the disadvantage of having poor mechanical properties. Herein, the mechanical properties of host-guest hydrogels were increased by adding a filler and incorporating other noncovalent interactions. Cellulose was added as a filler to the hydrogels to afford a composite. Citric acid-modified cellulose (CAC) with many carboxyl groups was used instead of conventional cellulose. The preparation began with mixing an acrylamide-based αCD host polymer (p-αCD) and a dodecanoic acid guest polymer (p-AADA) to form supramolecular hydrogels (p-αCD/p-AADA). However, when CAC was directly added to p-αCD/p-AADA to form biocomposite hydrogels (p-αCD/p-AADA/CAC), it showed weaker mechanical properties than p-αCD/p-AADA itself. This was caused by the strong intramolecular hydrogen bonding (H-bonding) within the CAC, which prevented the CAC reinforcing p-αCD/p-AADA in p-αCD/p-AADA/CAC. Then, calcium chloride solution (CaCl₂) was used to form calcium ion (Ca²⁺) complexes between the CAC and p-αCD/p-AADA. This approach successfully created supramolecular biocomposite hydrogels assisted by Ca²⁺ complexes (p-αCD/p-AADA/CAC/Ca²⁺) with improved mechanical properties relative to p-αCD/p-AADA hydrogels; the toughness was increased 6-fold, from 1 to 6 MJ/m³. The mechanical properties were improved because of the disruption of the intramolecular H-bonding within the CAC by Ca²⁺ and subsequent complex formation between the carboxyl groups of CAC and p-AADA. This mechanism is a new approach for improving the mechanical properties of hydrogels that can be broadly applied as biomaterials.

Supramolecular self-healing materials from non-covalent cross-linking host-guest interactions

The introduction of non-covalent bonds is effective for achieving self-healing properties because they can be controlled reversibly. One approach to introduce these bonds into supramolecular materials is use of host-guest interactions. This feature article summarizes the development of supramolecular materials constructed by non-covalent cross-linking through several approaches, such as host-guest interactions between host polymers and guest polymers, 1 : 2-type host-guest interactions, and host-guest interactions from the polymerization of host-guest inclusion complexes. Host-guest interactions show self-healing functions while also enabling stimuli-responsiveness (redox, pH, and temperature). The self-healing function of supramolecular materials is achieved by stress dispersion arising from host-guest interactions when stress is applied. Reversible bonds based on host-guest interactions have tremendous potential to expand the variety of functional materials.

Redox-responsive supramolecular polymeric networks having double-threaded inclusion complexes

Stimuli-responsive hydrogels have attracted attention as soft actuators that act similarly to muscles. In this work, hydrogel actuators controlled by host–guest interactions have been developed. The introduction of a 1:1 inclusion complex into a hydrogel is a popular design for achieving a change in cross-linking density. To realize faster and larger deformation properties, the introduction of a 1:2 inclusion complex is effective because the alteration in cross-linking density in a hydrogel with 1:2 complexes is larger than that in a hydrogel with 1:1 complexes. A redox-responsive hydrogel actuator cross-linked with 1:2 inclusion complexes is designed, where γ-cyclodextrin (γCD) and viologens modified with an alkyl chain derivative (VC11) were employed as the host and guest units, respectively. γCD includes two VC11 molecules in its cavity. The obtained γCD–VC11 hydrogel cross-linked with the 1:2 complex showed faster and larger deformation behaviour than the αCD–VC11 and the βCD–VC11 hydrogels cross-linked with a 1:1 complex. The deformation ratio and response speed of the γCD–VC11 hydrogel, which forms a supramolecular cross-linking structure by stimuli, are 3 and 11 times larger, respectively, than those of our previous hydrogel consisting of a βCD/ferrocene 1:1 inclusion complex.

A hydrogel actuator with a 1:2 host–guest complex controlled by redox stimuli has been developed to realize faster and larger deformation.

Design and mechanical properties of supramolecular polymeric materials based on host–guest interactions: the relation between relaxation time and fracture energy

The viscoelastic behaviour of the reversible cross-linking points, which could be tuned by the relaxation time and the tensile rate, improved the fracture energy of the supramolecular hydrogels.

[Functionalization of Cyclodextrin Derivatives to Create Supramolecular Pharmaceutical Materials]

Molecular recognition is useful in creating functional supramolecular materials. Non-covalent bond formations, such as host-guest interactions, hydrogen bonding, and electrostatic interaction, are effective tools for introducing various functions and properties into materials. This review focuses on such macroscopic functions as selective molecular adhesion, self-healing, toughness, and the actuation of supramolecular polymeric materials-materials which have potential in pharmaceutical development. These functions have been achieved using reversible bonding between cyclodextrins (CDs; cyclic host molecules) and guest molecules. For example, macroscopic adhesions between host-modified hydrogels and guest-modified hydrogels have been investigated. CD-modified hydrogels were found to show selective adhesion to a guest hydrogel with an appropriate molecular size for the CD cavity, indicating that the host-guest complex formation between the gels led to the adhesive behavior. Surprisingly, polymeric materials having host-guest cross-linking points show both high toughness and flexibility, unlike conventional covalently cross-linked materials. These materials also exhibited self-healing properties, capable of repairing damage to the materials. Furthermore, the supramolecular materials demonstrated macroscopic rapid expansion and contraction driven by external stimuli under wet or semi-dry conditions, in which the supramolecular gels vary the cross-linking density between the polymers accordingly. Different topological gels are able to vary the length of the polymer chain between cross-linking points to show large deformation. Both types of actuators were found to exhibit externally stimulated flexing behaviors. This review summarizes recent advancements in the development of these supramolecular materials, which appear to be promising new components in pharmaceutical science.

Mechanical and self-recovery properties of supramolecular ionic liquid elastomers based on host–guest interactions and correlation with ionic liquid content

Supramolecular materials have received considerable attention due to their higher fracture energy and self-recovery capability compared to conventional chemically cross-linked materials. Herein, we focus on the mechanical properties and self-recovery behaviours of supramolecular polymeric elastomers swollen with ionic liquid. We also gained insight into the correlation between ionic liquid content and mechanical properties. These supramolecular polymers with ionic liquid can be easily prepared from bulk copolymerization of the host–guest complex (peracetylated cyclodextrin and adamantane derivatives) and alkyl acrylates and subsequent immersion in ionic liquid such as 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. The supramolecular polymeric elastomers showed a self-recovery ability, which the conventional chemically cross-linked elastomers with ionic liquid cannot achieve.

Supramolecular ionic liquid elastomers showed higher fracture energy than chemically cross-linked ionic liquid elastomers and also self-recovery ability.

Femoral head deformity and severity of acetabular dysplasia of the hip

Patients with acetabular dysplasia commonly undergo peri-acetabular osteotomy after skeletal maturity to reduce the risk of the late development of osteoarthritis. Several studies have suggested that deformity of the femoral head influences the long-term outcome. We radiologically examined 224 hips in 112 patients with acetabular dysplasia and early-stage osteoarthritis. There were 103 women and nine men with a mean age of 37.6 years (18 to 49). A total of 201 hips were placed in the acetabular dysplasia group and 23 in a normal group. The centre–edge angle and acetabular head index were significantly smaller (both p < 0.001), and the acetabular angle, acetabular roof angle and roundness index were significantly greater in the acetabular dysplasia group than those in the normal group (all p < 0.001). There were significant correlations between the roundness index and other parameters. Femoral head shape may be influenced by the severity of the acetabular dysplasia.

Cite this article: Bone Joint J 2013;95-B:1192–6.

Associations of vertebral deformities and osteoarthritis with back pain among Japanese women: the Hizen-Oshima study

We examined the spinal distribution of the types of vertebral deformities and the associations of vertebral deformities and osteoarthritis with back pain in Japanese women. Midthoracic and upper lumbar vertebrae were more susceptible to deformity. Vertebral deformity and osteoarthritis were frequent and were associated with back pain.

INTRODUCTION

Vertebral fractures due to osteoporosis and osteoarthritis are both common and significant health problems in aged people. However, little is known about the descriptive epidemiology of the individual deformity types and the relative clinical impact in women in Japan.

METHODS

Lateral radiographs were obtained from 584 Japanese women ages 40 to 89 years old. Deformities were defined as vertebral heights of more than 3 standard deviations (SDs) below the normal mean. Osteoarthritis was defined as Kellgren-Lawrence (KL) grade 2 or higher. Information on upper or low back pain during the previous month was collected by questionnaire. We compared the spinal distribution of the three types of vertebral deformities (wedge, endplate, and crush) typical of fractures and examined the associations of number and type of vertebral deformities and osteoarthritis with back pain.

RESULTS

Fifteen percent of women had at least one vertebral deformity and 74% had vertebral osteoarthritis. The prevalence of upper or low back pain was 30.1%. Deformities were most common in the midthoracic and upper lumbar regions and wedge was the frequent type, followed by endplate and crush. Multiple logistic regression analysis showed that the odds of back pain was 3.0 (95% CI 1.5-6.3) times higher for women with a single wedge deformity and 3.2 (95% CI 1.0--0.6) times higher for women with two or more wedge deformities, compared to women with no wedge deformity. Vertebral osteoarthritis was associated with back pain (OR 1.8, 95% CI 1.1-2.9), independent of other covariates including age and deformities.

CONCLUSION

Our results in this group of Japanese women are similar to and consistent with results reported previously in other populations of Japanese and Caucasians.

Beneficial effect of risedronate for preventing recurrent hip fracture in the elderly Japanese women

SUMMARY

A 36-month observational study compared the incidence of unaffected side hip fracture in Japanese female osteoporosis patients with a history of hip fracture between 173 patients receiving risedronate and 356 risedronate-untreated controls. New hip fractures were significantly less frequent in the risedronate group, suggesting a preventive effect in high-risk patients.

INTRODUCTION

The purpose of this study was to investigate the preventive effect of risedronate on second hip fracture immediately following a first hip fracture in Japanese female osteoporosis patients with unilateral hip fracture.

METHODS

We conducted a prospective matched cohort study in 184 patients treated with risedronate and 445 patients not receiving risedronate after discharge from hospital. Both groups were followed-up for 36 months, and the incidence of unaffected side hip fracture and the frequency of adverse events were assessed.

RESULTS

Efficacy could be investigated in 173 patients from the risedronate group and 356 patients from the control group. Hip fracture was detected in 5 and 32 patients, respectively. Kaplan-Meier estimates of the 36-month fracture incidence were 4.3% in the risedronate group and 13.1% in the control group (P = 0.010, log-rank test). The hazard ratios (95% confidence intervals) obtained by univariate and multivariate analysis were 0.310 (0.121-0.796) and 0.218 (0.074-0.639), respectively, indicating a significantly lower incidence of unaffected side hip fracture in the risedronate group. Adverse events occurred in 38 patients (48 events) from the risedronate group and 94 patients (108 events) from the control group, with serious adverse events in 21 patients (26 events) and 78 patients (88 events), respectively.

CONCLUSIONS

No significant differences were observed between the two groups. The incidence of unaffected side hip fracture was significantly lower in the risedronate group. Accordingly, risedronate may have a preventive effect on hip fracture in high-risk Japanese female osteoporosis patients for fracture with a history of unilateral hip fracture.

Quantitative ultrasound and radiographic absorptiometry are associated with vertebral deformity in Japanese Women: the Hizen-Oshima study

We evaluated the ability of heel quantitative ultrasound (QUS) and metacarpal radiographic absorptiometry (RA) to identify subjects with vertebral deformities in Japanese women aged ≥40. Both QUS and RA were associated with vertebral deformities, and the estimated prevalence at each T-score widely varied with age.

INTRODUCTION

Heel QUS and metacarpal RA have been used for screening patients to evaluate risk of osteoporotic fractures. The aim of this study was to evaluate the ability of QUS and RA to identify women with vertebral deformities in 570 Japanese women aged ≥40, and to estimate the prevalence of vertebral deformity at each T-score.

METHODS

Calcaneal QUS and metacarpal RA were performed. Radiographic vertebral deformities were assessed by quantitative morphometry, defined as vertebral heights more than 3 SD below the normal mean.

RESULTS

The receiver operating characteristic analysis showed that both calcaneal stiffness index (SI) and metacarpal bone mineral density (BMD) were associated with vertebral deformities. Using the T-score of -2.5 as a cutoff value, the specificity and sensitivity for identifying individuals with vertebral deformities was 65% and 83% for calcaneal SI, and 40% and 88% for metacarpal BMD, respectively. The prevalence of vertebral deformity was estimated using age-adjusted logistic regression models. Women with calcaneal SI T-score of -2.5 had a 2% estimated probability of vertebral deformity at age 40, and 22% at age 80. For metacarpal BMD T-score of -2.5, estimated probability was less than 1% at age 40, and 27% at age 80.

CONCLUSION

Both calcaneal SI and metacarpal BMD were associated with prevalence of vertebral deformity. Furthermore, the prevalence widely varied with age at any given bone value.

Proteomic analysis of secreted proteins from aseptically grown rice

Plants are known to secrete a variety of compounds into the rhizosphere. These compounds are thought to play important roles in the regulation of soil chemical properties and soil microorganisms. To determine the composition of proteins secreted from rice roots, aseptic hydro culture was performed, and the collected proteins were analyzed. Over 100 proteins were identified; most were identified using the rice database (RAP-DB), and about 60% of the identified proteins were suspected to have a signal peptide. Functional categorization suggested that most were secondary metabolism- and defense-related proteins. Pathogenesis- and stress-related proteins were the major proteins found in the bathing solution under aseptic conditions. Thus, we propose that rice plants constitutively secrete a large variety of proteins to protect their roots against abiotic and/or biotic stresses in the environment.

In vivo structural analysis of subchondral trabecular bone in osteoarthritis of the hip using multi-detector row CT

OBJECTIVE

With developments in clinical computed tomography (CT), in vivo analysis of patients' bone microstructure has become increasingly possible. We analyzed the subchondral trabecular bone of hip osteoarthritis (OA) patients using multi-detector row CT (MDCT) to closely examine the structural changes that occur as OA progresses.

DESIGN

47 female hip joints were studied: 20 with OA secondary to hip dysplasia (11 advanced OA, nine early-moderate OA), seven with hip dysplasia without OA, and 20 normal. The images' maximal spatial resolution was 280 × 280 × 500 μm. Regions of interest (ROIs) were the subchondral trabecular bones of the acetabulum and femoral head. Measurement parameters were bone volume fraction (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp), structure model index (SMI), trabecular bone pattern factor (TBPf), Euler's number, and degree of anisotropy (DA). Relationships between joint space volume and these parameters were analyzed.

RESULTS

With decreasing joint space, Tb.Th and BV/TV increased, and Tb.Sp, Tb.N, SMI, TBPf, and DA decreased significantly. The microstructures were significantly different between the early to advanced OA groups and the normal and dysplasia groups; there was no significant difference between the normal and dysplasia groups.

CONCLUSIONS

Changes of subchondral trabecular bone structure in OA could be evaluated using MDCT, despite imperfect spatial resolution and limited accuracy. Trabecular bone thickening and associated structural changes may be closely related to OA. Changes were observed in early to advanced OA, but not in dysplasia. This method may help to further elucidate OA pathogenesis, determine the therapeutic strategy, and evaluate therapy.

Refined human artificial chromosome vectors for gene therapy and animal transgenesis

Human artificial chromosomes (HACs) have several advantages as gene therapy vectors, including stable episomal maintenance, and the ability to carry large gene inserts. We previously developed HAC vectors from the normal human chromosomes using a chromosome engineering technique. However, endogenous genes were remained in these HACs, limiting their therapeutic applications. In this study, we refined a HAC vector without endogenous genes from human chromosome 21 in homologous recombination-proficient chicken DT40 cells. The HAC was physically characterized using a transformation-associated recombination (TAR) cloning strategy followed by sequencing of TAR-bacterial artificial chromosome clones. No endogenous genes were remained in the HAC. We demonstrated that any desired gene can be cloned into the HAC using the Cre-loxP system in Chinese hamster ovary cells, or a homologous recombination system in DT40 cells. The HAC can be efficiently transferred to other type of cells including mouse ES cells via microcell-mediated chromosome transfer. The transferred HAC was stably maintained in vitro and in vivo. Furthermore, tumor cells containing a HAC carrying the suicide gene, herpes simplex virus thymidine kinase (HSV-TK), were selectively killed by ganciclovir in vitro and in vivo. Thus, this novel HAC vector may be useful not only for gene and cell therapy, but also for animal transgenesis.

Genotyping of Strawberry (Fragaria ananassa Duch.) Cultivars by DNA Markers: Interlaboratory Study

Fourteen Japanese laboratories validated the reproducibility of genotyping by 25 cleavage amplified polymorphic sequence (CAPS) markers for discrimination of strawberry (Fragaria ananassa Duch.) cultivars. Both the sensitivity and specificity rate of 12 markers were 100, those of another 12 were &gt;95, and those of 1 were &gt;90. These results indicate that the method of genotyping by the CAPS markers was highly reproducible and could provide a useful basis for practical identification of strawberry cultivars. This is the first report of the statistical validation of crop genotyping by DNA markers.

Use of a dual priming oligonucleotide system to detect multiple sexually transmitted pathogens in clinical specimens

AIMS

To evaluate a new dual priming oligonucleotide (DPO)-based multiplex polymerase chain reaction (PCR) assay for detection of six sexually transmitted pathogens, including Chlamydia trachomatis, Neisseria gonorrhoeae, Mycoplasma genitalium, Mycoplasma hominis, Ureaplasma urealyticum and Trichomonas vaginalis.

METHODS AND RESULTS

Using 130 clinical specimens, the results obtained by the multiplex PCR, previously established in-house PCR and COBAS Amplicor PCR assays were compared. The specimens frequently contained multiple pathogens (34/130 specimens). The multiplex PCR assay had an overall sensitivity of 96% and specificity of 100% compared to the in-house PCR assay at >20 microg ml(-1) of DNA concentrations in samples and there was no cross-reaction with nonpathogenic Neisseria species that cause the majority of false-positive results with the COBAS Amplicor PCR assay.

CONCLUSIONS

The DPO-based multiplex PCR assay detected the six sexually transmitted pathogens in clinical specimens with a high sensitivity and specificity, although its sensitivity was dependent on the DNA content of the samples.

SIGNIFICANCE AND IMPACT OF THE STUDY

It is the first report about the new DPO-based technique to detect multiple sexually transmitted pathogens in a single assay, which has considerable potential to diagnose the infections accurately and rapidly.

MicroRNAs as biomarkers and therapeutic drugs in human cancer

MicroRNAs (miRNAs) are evolutionarily conserved, endogenous, noncoding small RNAs that act as post-transcriptional gene regulators. Experimental evidence has shown that miRNAs can play roles as oncogenes or tumor suppressor genes, suggesting their contribution to cancer development and progression. Expression profiles of human miRNAs demonstrated that many miRNAs are deregulated in cancers and are differentially expressed in normal tissues and cancers. Therefore, miRNA profiling is used to create signatures for a variety of cancers, indicating that the profile will help further establish molecular diagnosis, prognosis and therapy using miRNAs. This paper introduces the aberrant expression of miRNAs in human cancer, and discusses the potential of these miRNAs as biomarkers and targets/molecules for molecular therapy.

Ring-opening polymerization of cyclic esters by cyclodextrins

Synthetic polymers, typically prepared by addition polymerization or stepwise polymerization, are used constantly in our daily lives. In recent years, polymer scientists have focused on more environmentally friendly synthetic methods such as mild reaction conditions and biodegradable condensation polymers, including polyesters and polyamides. However, challenges remain in finding greener methods for the synthesis of polymers. Although reactions carried out in water are more environmentally friendly than those in organic solvents, aqueous media can lead to the hydrolysis of condensation polymers. Furthermore, bulk polymerizations are difficult to control. In biological systems, enzymes synthesize most polymers (proteins, DNAs, RNAs, and polysaccharides) in aqueous environments or in condensed phases (membranes). Most enzymes, such as DNA polymerases, RNA polymerases, and ribosomes, form doughnutlike shapes, which encircle the growing polymer chain. As biopolymers form, the active sites and the substrate-combining sites are located at the end of the growing polymer chain and carefully control the polymerization. Therefore, a synthetic catalyst that could insert the monomers between the active site and binding site would create an ideal biomimetic polymerization system. In this Account, we describe cyclodextrins (CDs) as catalysts that can polymerize cyclic esters (lactones and lactides). CDs can initiate polymerizations of cyclic esters in bulk without solvents (even water) to give products in high yields. During our studies on the polymerization of lactones by CDs in bulk, we found that CDs function not only as initiators (catalysts) but also as supporting architectures similar to chaperone proteins. CDs encircle a linear polymer chain so that the chain assumes the proper conformation and avoids coagulation. The CDs can mimic the strategy that living systems use to prepare polymers. Thus, we can obtain polyesters tethered to CDs without employing additional solvents or cocatalysts. Although CD has many hydroxyl groups, only one secondary hydroxyl group attaches to the polyester chain. In addition, the polymerization is highly specific for monomer substrates. We believe that this is the first system in which the catalyst includes monomers initially and subsequently activates the included monomers. The catalyst then inserts the monomers between the binding site and the growing chain. Therefore, this system should provide a new environmentally friendly route to produce biodegradable functional polymers.

Rotational acetabular osteotomy for advanced osteoarthritis secondary to developmental dysplasia of the hip

We evaluated the results of rotational acetabular osteotomy in 44 hips (42 patients) with advanced osteoarthritis secondary to developmental dysplasia. The mean age of the patients at surgery was 43.4 years (30 to 59) and the mean follow-up was 12.1 years (8 to 19). The mean Merle d'Aubigné clinical score improved from 10.8 points (8 to 15) pre-operatively to 13.5 points (6 to 18) at follow-up. Radiologically, this procedure produced adequate improvement regarding cover of the femoral head. At follow-up, the osteoarthritic stage assessed using the Japanese Orthopaedic Association grading, was improved in 11 hips (25%), unchanged in 22 (50%) and had progressed in 11 (25%). The mean pre-operative roundness index of the femoral head was significantly different in the 33 hips which had improved or maintained their osteoarthritic stage compared with the 11 which had progressed (53.7% vs 63.7%; p < 0.001). Osteoarthritis with a round femoral head is considered to be an indication for rotational acetabular osteotomy, even in advanced stages of the disease.

Rotational acetabular osteotomy with a resection of the lateral edge of the acetabulum for the treatment of advanced coxarthrosis

INTRODUCTION

We compared the functional and radiological results of a rotational acetabular osteotomy (RAO) with and without a resection of the lateral edge of the acetabulum. The purpose of the resection was to obtain good joint congruency.

MATERIALS AND METHODS

RAO was performed on 71 hips to treat advanced coxarthrosis caused by acetabular dysplasia. RAO without a resection (non-resection group) was performed in 54 patients (57 hips) with a median age of 43.1 years. The remaining 14 patients (14 hips), who had a median age of 44.6 years, received RAO with a resection of the lateral edge of the acetabulum (resection group).

RESULTS

The average postoperative total hip joint score was better than the average preoperative score in the non-resection group (P < 0.001), but not in the resection group. In the resection group, all hips displayed progressive osteoarthritic change and ten hips had chondrolysis of the hip joint and a collapse of the transferred acetabulum within 3 years. In the non-resection group, 15 hips showed progressive osteoarthritic change, 24 hips had no change, and 18 hips showed a decrease in the osteoarthritic stage.

CONCLUSION

Our findings demonstrated that resection of the lateral edge of the acetabulum is not a useful adjunct to the RAO procedure for the treatment of advanced coxarthrosis.

Correction of a genetic defect in multipotent germline stem cells using a human artificial chromosome

Human artificial chromosomes (HACs) have several advantages as gene therapy vectors, including stable episomal maintenance that avoids insertional mutations and the ability to carry large gene inserts including regulatory elements. Multipotent germline stem (mGS) cells have a great potential for gene therapy because they can be generated from an individual's testes, and when reintroduced can contribute to the specialized function of any tissue. As a proof of concept, we herein report the functional restoration of a genetic deficiency in mouse p53-/- mGS cells, using a HAC with a genomic human p53 gene introduced via microcell-mediated chromosome transfer. The p53 phenotypes of gene regulation and radiation sensitivity were complemented by introducing the p53-HAC and the cells differentiated into several different tissue types in vivo and in vitro. Therefore, the combination of using mGS cells with HACs provides a new tool for gene and cell therapies. The next step is to demonstrate functional restoration using animal models for future gene therapy.

Anomalous origin of a coronary artery from the opposite sinus of Valsalva with an interarterial course: clinical profile and approach to management in the pediatric population

An anomalous origin of a coronary artery from the opposite sinus of Valsalva with an interarterial course (interarterial coronary artery [IACA]) is a rare congenital anomaly associated with sudden cardiac death. The cardiac and surgical databases at a single pediatric institution were reviewed for a description of the clinical profiles and associated risk factors of this coronary anomaly. From 1994 to 2006, IACA was diagnosed for 31 patients with a median age of 6.2 years (range, birth to 16 years). The symptoms for 6 (19%) of the 10 patients (32%) presenting with symptoms were deemed to be cardiac in origin. The symptoms for the remaining 21 patients (68%) were incidental findings. Of the 31 patients, 29 (94%) had normal resting electrocardiograms (ECG). A total of 17 patients underwent dobutamine stress echo. None had wall motion abnormalities, but two had ECG changes indicating ischemia, and 4 had abnormal coronary flow, as detected by Doppler echocardiography. Seven patients, with either acute symptoms or testing suggestive of ischemia, underwent surgery. All seven had an interarterial left main coronary artery. There was one cardiac-related death. No sudden death was found in either the surgery or nonsurgery group during the mean follow-up period of 23 and 58 months, respectively. Whether surgical intervention modifies the natural history of the anomaly or not remains to be determined.