Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration - a pilot study in vitro

BACKGROUND

The spectrum of indications for the use of membranes and scaffolds in the field of oral and maxillofacial surgery includes, amongst others, guided bone regeneration (GBR). Currently available membrane systems face certain disadvantages such as difficult clinical handling, inconsistent degradation, undirected cell growth and a lack of stability that often complicate their application. Therefore, new membranes which can overcome these issues are of great interest in this field.

METHODS

In this pilot study, we investigated polycaprolactone (PCL) scaffolds intended to enhance oral wound healing by means of melt electrospinning writing (MEW), which allowed for three-dimensional (3D) printing of micron scale fibers and very exact fiber placement. A singular set of box-shaped scaffolds of different sizes consisting of medical-grade PCL was examined and the scaffolds' morphology was evaluated via scanning electron microscopy (SEM). Each prototype sample with box sizes of 225 μm, 300 μm, 375 μm, 450 μm and 500 μm was assessed for cytotoxicity and cell growth by seeding each scaffold with human osteoblast-like cell line MG63.

RESULTS

All scaffolds demonstrated good cytocompatibility according to cell viability, protein concentration, and cell number. SEM analysis revealed an exact fiber placement of the MEW scaffolds and the growth of viable MG63 cells on them. For the examined box-shaped scaffolds with pore sizes between 225 μm and 500 μm, a preferred box size for initial osteoblast attachment could not be found.

CONCLUSIONS

These well-defined 3D scaffolds consisting of medical-grade materials optimized for cell attachment and cell growth hold the key to a promising new approach in GBR in oral and maxillofacial surgery.

Hydrophilic sponges based on 2-hydroxyethyl methacrylate: part VII: modulation of sponge characteristics by changes in reactivity and hydrophilicity of crosslinking agents

Despite previous unsuccessful attempts to use hydrated poly(2-hydroxyethyl methacrylate) sponges as implantable biomaterials, recently these materials became important as peripheral components in an artificial cornea of the core-and-skirt design. The low mechanical strength of sponges prompted this study on possible improvement of tensile properties by the use of a variety of crosslinking agents. Three vinylic (dimethacrylates) and two allylic compounds were used at different concentrations (0.1 to 2% (mol)) as crosslinking agents in the production of sponges. Their influence on the mechanical properties, porous morphology and swelling behavior of resulting sponges was evaluated. The onset of phase separation during polymerization was also measured by visible spectrophotometry. The results suggested an inherent heterogeneity of sponges, i.e. pores of non-uniform size and structural inhomogeneities. While the effects of changes in the nature and concentration of crosslinking agents on the equilibrium water content of sponges were ambiguous, some of the mechanical properties, such as toughness and elasticity, were improved by crosslinking with allylic agents. Scanning electron microscopic examination suggested that the mechanical effect is related to the variation of size of the polymer particles constituting the sponge structure, which was proved to be dependent upon the onset of phase separation during polymerization.

Biodegradation in vitro and retention in the rabbit eye of crosslinked poly(1-vinyl-2-pyrrolidinone) hydrogel as a vitreous substitute

To elucidate the relatively short retention of crosslinked poly(1-vinyl-2-pyrrolidinone) hydrogels in the eye when used as potential vitreous substitutes, a 14C-labeled hydrogel was produced and subjected to both in vitro biodegradation assays and in vivo experiments. The polymer was synthesized by the free-radical copolymerization of 99% 1-vinyl-2-pyrrolidinone with 1% 14C-methyl methacrylate in the presence of ethylene glycol dimethacrylate (0.1%) as crosslinking agent. The in vitro protocol for assessing the biodegradation included the incubation of hydrogel with hydrolases (trypsin or collagenase), followed by examination of changes in its physical characteristics and by monitoring its residual radioactivity, as well as by detection of possible degradation products. Within the maximum duration of experiments (4 weeks), none of the procedures indicated biodegradation of polymer. The hydrogel was also injected into the vitreous humor of rabbits and followed up to 4 weeks. Residual radioactivity measurements of the vitreous contents indicated that 50% of the polymer was removed by the end of this period. Histopathologic examination revealed cell infiltrates of the mononuclear phagocyte system in both vitreous and retinal tissue. A possible phagocyte-mediated mechanism for the dissipation of hydrogel is discussed.

Clinical results of implantation of the Chirila keratoprosthesis in rabbits

AIMS/BACKGROUND

An ideal keratoprosthesis (KPro) would closely resemble a donor corneal button in terms of its surgical handling, optics, and capacity to heal with host tissue in order to avoid many of the complications associated with the KPros which are currently in clinical use. This study was carried out to assess the long term clinical outcomes on implantation of the core and skirt poly(2-hydroxyethyl methacrylate) KPro in animals.

METHODS

20 KPros were made and implanted as full thickness corneal replacements into rabbits and followed for up to 21 months to date.

RESULTS

80% of the prostheses have been retained, with a low incidence of complications such as cataract, glaucoma, and retroprosthetic membrane formation which are frequently associated with KPro surgery.

CONCLUSIONS

KPros of this type may offer promise in the treatment of patients for whom penetrating keratoplasty with donor material carries a poor prognosis. Refinement of the KPro and further animal trials, including implantation into abnormal corneas, are however mandatory before human implantation could be planned.

Keratoprosthesis: preliminary results of an artificial corneal button as a full-thickness implant in the rabbit model

PURPOSE

To develop a prototype artificial cornea and evaluate it in the rabbit model.

METHODS

Hydrogel core-and-skirt keratoprostheses were made and were inserted as full-thickness implants covered with conjunctival flaps in the right eyes of eight rabbits.

RESULTS

Peroperative complications related to inadequate mechanical strength led to failure in the early postoperative period in three animals, one was euthanased for an unrelated reason and the remaining four have been successful for up to 16 weeks' follow-up.

CONCLUSIONS

Full-thickness implantation of an artificial cornea, analogous to penetrating keratoplasty, has been achieved in the rabbit model. Histological findings confirm that integration of the prosthesis with host tissue occurs. The main complications encountered in this preliminary series were related to inadequate strength of the sponge skirt of this prototype device. Work in our laboratories is now concentrated upon improving the mechanical qualities of the hydrogel skirt and on the enhancement of biointegration.

Preliminary Evaluation of a Hydrogel Core-and-Skirt Keratoprosthesis in the Rabbit Cornea

BACKGROUND

We developed a core-and-skirt keratoprosthesis, with both components made from poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels. The identical chemical nature of both spongy skirt and transparent core assures a permanent union between them. We have previously shown that PHEMA sponges, within a certain range of pore size, can support cellular invasion and neovascularization when implanted into the rabbit cornea. The present study is the first to evaluate the behavior of the whole prosthesis after implantation into the rabbit cornea.

METHODS

Hydrogel keratoprostheses were inserted intrastromally into the corneas of seven rabbits and histologically examined by light microscopy in five eyes enucleated at 8, 12, and 14 weeks.

RESULTS

None of the implants extruded over this period. Both clinical and histopathologic examination showed that the keratoprostheses were well tolerated by the host tissue. The porous skirt was fully integrated into the stroma by fibrovascular invasion, and no capsule formed around the implants. Stromal melting anterior to the implant occurred in two cases, but this did not affect the fixation of the keratoprostheses.

CONCLUSIONS

This study indicates that our keratoprosthesis can prevent extrusion in the short term when inserted into an intrastromal pocket of the rabbit eye.

Crosslinked poly(1-vinyl-2-pyrrolidinone) as a vitreous substitute

A hydrogel with a high water content was produced and tested as a possible vitreous substitute. The polymer (poly[1-vinyl-2-pyrrolidinone]) (PVP) was synthesized by free radical bulk polymerization of 1-vinyl-2-pyrrolidinone (VP) in the presence of 0.25% divinyl glycol (DVG) as a crosslinking agent. The fully hydrated polymer, containing about 98% water, was clear, transparent, autoclavable, and easily injected through a small-gauge needle with minimum fragmentation, and without changes in its optical properties. Dynamic mechanical analysis of the hydrogel indicated a covalently crosslinked elastic network both before and after injection. The resilience of hydrogel decreased after being subjected to shear stress during the injection process. A cytotoxicity bioassay of the hydrogel in vitro, using cultured mouse (Balb/ c-3T3) fibroblasts, showed cytostatic but not cytocidal effects. The hydrogel was injected into the vitreous cavity of rabbits and followed up to 4 weeks. The gel was clinically well tolerated, however opacities in the vitreous body were observed following the insertion of the gel. Histopathological examination revealed no adverse reactions to the retina, but the presence of loose polymer particles indicated the possibility of the biodegradation of the polymer. These results suggest the potential use of crosslinked PVP hydrogels as vitreous substitutes, provided that their biodegradation is not significant, a matter that should be further investigated.

Poly(1-vinyl-2-pyrrolidinone) hydrogels as vitreous substitutes: histopathological evaluation in the animal eye

A homopolymer of 1-vinyl-2 pyrrolidinone and its copolymer with 2-hydroxyethyl methacrylate, both cross-linked with divinyl glycol, were produced as possible substitutes for the vitreous body of the eye. The hydrated polymers behaved like viscoelastic gels, displaying excellent physical and optical properties. The sterile gels (0.7-1.5 ml) were injected into the vitreous cavity of rabbits, which previously underwent gas-mediated vitrectomy. Clinically, the eyes were quiet, with the exception of transient opacities in the vitreous. After 4 weeks, the operated eyes were enucleated and subjected to histopathological analysis using light and transmission electron microscopy. The common feature in all sections was the invasion of inflammatory cells. Vacuoles containing granular material, assumed to be polymer, were seen in the intercellular spaces of the neural retina, in the retinal pigment epithelium cells, and in macrophages. These findings indicated the fragmentation and phagocytosis of synthetic gels. It appeared that the biodegradation of the internalized polymers did not proceed further, however, the fate of polymers and their usefulness as vitreous substitutes should be investigated through long-term experiments.

Interpenetrating polymer network (IPN) as a permanent joint between the elements of a new type of artificial cornea

The combination at the interface between two chemically identical polymers was investigated by light and electron (scanning, transmission) microscopy. The polymers constitute elements of a new type of artificial cornea in which the peripheral skirt is made from spongy poly(2-hydroxyethyl methacrylate) (PHEMA) and the central optical zone from homogeneous, transparent PHEMA. Their two-phase combination along the boundary fulfill formally the requirements for an interpenetrating polymer network (IPN). The procedure for the manufacture of prosthesis was described in detail. Thin and ultrathin sections excised from the interface region were investigated using microscopic techniques. Light microscopy allowed the measurement of the diffusion path length of transparent PHEMA into sponge, which was approximately 0.5 mm. Transmission electron microscopy revealed a cellular-like morphology as well as larger segregated zones, which indicated network interpenetration on a molecular level and also a relatively poor miscibility of the two polymers despite their identical chemical structure. The latter was interpreted as a result of the submicroscopic restraints imposed by polymer I (sponge) upon polymer II. This study provides evidence that the interface combination of the prosthetic elements should be regarded as a gradient homo-IPN. This system offers a union between elements much stronger than those previously reported in artificial corneas.