Swine slaughterhouse biowaste: an environmental sustainability assessment of composting, amended soil quality, and phytotoxicity

In this article, the environmental sustainability of a circular economy concept applied to the management of biowaste was studied. To achieve this goal, the composting performance, compost-amended soil health, and phytotoxicity were assessed in the case of management of solid waste from a small swine slaughterhouse. Microorganisms present in a similar composting process were used as inoculums to improve the efficiency of composting. Addition of the inoculum promoted a faster and more efficient composting process than composting without the inoculum. The physical, chemical, and microbiological characteristics of soil were considered to be improved after compost application. Phytotoxicity tests in soils with and without compost amendment showed that a soil-compost mixture (90:10 and 70:30 mass ratios) was not phytotoxic to the plant species Sorghum saccharatum and Lepidium sativum, and that soil with compost showed higher plant biomass growth than that without compost amendment. The triple bottom line methodology used in this study can help in the assessment of circular economy activity in relation to the environmentally sustainable management of solid waste generated in small swine slaughterhouses.

Slaughterhouse by-products composting: can microorganisms inoculum addition mitigate final compost odor emission?

Small slaughterhouses generate biowaste, which for economic reasons, is generally destined for composting. Inoculating appropriate microorganisms can improve biodegradation efficiency and mitigate odor generation during the composting process and can give rise to composts with neutral or pleasant odors. Therefore, the aim of this study was to compare the odor intensity reduction of compost generated with and without a formulated inoculum (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris). A set of experimental data was collected and analyzed according to the German "Verein Deutscher Ingenieure" odor protocol. The results showed that adding microorganisms was effective in reducing unpleasant odors in all three composts generated from swine, cattle, and poultry slaughterhouse by-products during both summer and winter seasons. Additionally, soil odor was predominant in composts that were inoculated in the two tested seasons (i.e., summer and winter). On the other hand, composts without inoculation had odors similar to peat for swine compost, ammonia for cattle compost, and manure for poultry compost, regardless of the season tested. Overall, composting process with appropriate inoculum can help in the correct disposal of slaughterhouse wastes by transforming organic matter into composts, which can have economic and environmental value as a soil conditioner and/or fertilizer.

Characterization of bacterial resistance in treated hospital wastewater

This article seeks to characterize the bacterial profile of pediatric hospital wastewater samples collected at the outlet of a wastewater treatment plant, and to estimate their relative susceptibility to antimicrobial agents. A total of 64 strains were isolated in the wastewater samples, of which 49 were identified as belonging to different families: Enterobacteriaceae (e.g. Escherichia coli, Klebsiella sp., Citrobacter sp.) comprised 57.2% of the identified bacteria, non-Enterobacteriaceae (e.g. Aeromonas sp., Pseudomonas sp.) comprised 30.6%, and Streptococcaceae (e.g. Enterococcus sp.) comprised 12.2%. The tests of the susceptibility of the bacteria to the antimicrobial agents used in the hospital showed that 100% of the bacterial species found discharged in the hospital wastewater treatment system were resistant to one or more of the antimicrobial agents according to the criteria of the U.S. Clinical Laboratory Standards Institute/National Committee for Clinical Laboratory Standards. The antimicrobial agent tests showed that meropenem, norfloxacin, ciprofloxacin, levofloxacin, and cefepime were the most effective antimicrobials against bacteria of the Enterobacteriaceae family. For bacteria of the non-Enterobacteriaceae family, norfloxacin, ciprofloxacin, levofloxacin, and cefepime presented the most effective antimicrobial action, whereas for bacteria of the Streptococcaceae family, ampicillin, vancomycin, and gentamicin were the most effective antimicrobials. Hospital wastewater treatment plants could be considered as places of selection pressure for bacterial resistance because of the presence of antibiotic-resistant bacteria coming from sewers or created at the treatment plant.

Are hospital wastewater treatment plants a source of new resistant bacterial strains?

To understand which type of hospital waste may contain the highest amount of antibiotic resistant microorganisms that could be released into the environment, the bacterial strains entering and leaving a hospital wastewater treatment plant (HWTP) were identified and tested for their antibiotic susceptibility. To achieve this goal, samples were collected from three separate sites, inlet and outlet wastewater positions, and sludge generated in a septic tank. After microbiological characterization according to APHA, AWWA, and WEF protocols, the relative susceptibility of the bacterial strains to various antibiotic agents was assessed according to the Clinical and Laboratory Standards Institute guidelines, to determine whether there were higher numbers of resistant bacterial strains in the inlet wastewater sample than in the outlet wastewater and sludge samples. The results showed more antibiotic resistant bacteria in the sludge than in the inlet wastewater, and that the Enterobacteriaceae family was the predominant species in the collected samples. The most antibiotic-resistant families were found to be Streptococcacea and non-Enterobacteriaceae. Some bacterial strains were resistant to all the tested antibiotics. We conclude that the studied HWTP can be considered a source of resistant bacterial strains. It is suggested that outlet water and sludge generated in HWTPs should be monitored, and that efficient treatment to eliminate all bacteria from the different types of hospital waste released into the environment is adopted.

Using photocatalyzed-peroxonization to disinfect and denature genetic material of bacterial plasmids present in hospital wastewater

The literature reports the presence of multiresistant microorganisms in wastewater discharged from municipal and hospital wastewater treatment plants (WWTPs). This has led to questions concerning the disinfection efficiency of the treatments applied. Thus, this study aimed to assess the efficiency of different chemical oxidation methods to disinfect and to degrade bacterial plasmids present in hospital wastewaters, to avoid the dispersion of antibiotic resistance genes in the environment. The methods tested were UV_254nm alone or associated with an Ag or Ti-photocatalyst in photo-peroxonization (UV_254 nm/H₂O₂/O₃/Ag₂O/Ag₂CO₃@PU or UV_254 nm/H₂O₂/O₃/TiO₂@PU) under different pH conditions (4, 7, and 10). The application of plasmid DNA electrophoresis to hospital wastewater treated using an advanced oxidation process (AOP) achieved the total structural denaturation of microorganism plasmids at the three pH values tested. Also, UV_254 nm alone was partially efficient in the disinfection of hospital wastewater. AOPs performed with the two functionalized catalysts resulted in 100% disinfection after 10 min at the three pH values tested. No intact plasmids were observed after 20 min of treatment with photocatalysis. This study could contribute to the development and improvement of wastewater treatment aimed at mitigating the spread of multiresistant microorganisms in the environment.

Antibiotic degradation and mineralization: efficiency increase on combining different chemical treatment processes

The goal of this study was to assess the efficiency of antibiotic degradation applying different chemical treatment methods and their combinations. Thus, improvement in the efficiency of these methods when combined was quantified. The methods tested to degrade/mineralize the antibiotics amoxicillin (AMX) and ciprofloxacin (CIP) under different pH conditions (4, 7 and 10) were ultra-violet irradiation (UV_254 nm), ultrasound (US), hydrogen peroxide (H₂O₂) and ozone (O₃) alone and in combination. The results showed that individual methods were only partially efficient in the degradation/mineralization of antibiotics, except for ozonation at alkaline pH. In the combined methods, the best performance was obtained with US/UV/H₂O₂/O₃ (pH 10, 20-min treatment), where the degradation rates for the antibiotics were 99.8% for CIP and 99.9% for AMX. For the mineralization efficiency the values obtained were 71.3% for CIP and 79.2% for AMX. The results of this study could contribute to the development and improvement of wastewater treatment aimed at avoiding the presence of residual antibiotics in the environment.

Development of a low-cost inoculum to improve composting of cattle slaughterhouse by-products

The composting process is an option for acceptable environmental management of cattle slaughterhouse by-products. The goals of this article were (i) to make a low-cost inoculum using popular supermarket ingredients and microorganisms that are already present in the composting environment, and (ii) to compare the efficiency of the composting process with and without the application of formulated inoculum. Initially, a consortium of microorganisms already present in the composting environment (Saccharomyces cerevisiae, Bacillus subtilis, and Rhodopseudomonas palustris) was prepared in a low-cost culture medium for use as an inoculum for the composting process. The composting process with the addition of the inoculum was more efficient than the composting process without the inoculum, in terms of both the chemical composition and the process efficiency, but mainly in relation to the time required for composting, with the mean times for decay of 50% of the windrows' temperature (taking in to account the difference between internal and external windrow temperatures) being 96 days without inoculum and 65 days with inoculum. Thus, inoculum made with low-cost supermarket products reduced the composting time and yielded compost of better quality.

Urban afforestation: using phytotoxicity endpoints to compare air pollution tolerance of two native Brazilian plants Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis)

Urban afforestation can mitigate the effects of air pollution, but the suitability of plant species for this purpose needs to be determined according to pollution intensity and climate change. The goal of this study was to evaluate the sensitivity of different phytotoxicity endpoints using two native Brazilian plant species as models, Aroeira (Schinus terebinthifolius) and Cuvatã (Cupania vernalis). The sensitivity parameters evaluated could help in selecting the most air-pollution-tolerant plant species for use in urban afforestation programs. The two plant species were exposed, in a greenhouse, to the combustion gases of a diesel engine for 120 days, with daily intermittent gas exposure. Every 30 days, leaf injury (chlorosis and necrosis), biomass, and physiological/biochemical parameters (proteins, chlorophyll, and peroxidase enzyme activity) were evaluated for both plant species. For the two selected species, the endpoints studied can be ranked according to their sensitivity (or inversely the tolerance) to diesel oil combustion gases in the following order: peroxidase > biomass ≈ chlorophyll > protein > leaf injury. The endpoint responses of higher plants can be used to assess the suitability of particular plant species for use in urban afforestation areas with relatively intense vehicle traffic.

Using textile industrial sludge, sewage wastewater, and sewage sludge as inoculum to degrade recalcitrant textile dyes in a co-composting process: an assessment of biodegradation efficiency and compost phytotoxicity

Recalcitrant dyes found in textile wastewater represent a threat for sustainable textile production due to their resistance to conventional treatments. This study assessed an alternative co-composting system for the treatment of recalcitrant textile dyes where textile industrial sludge, sewage wastewater, or sewage sludge were used as microbial compost inocula. The biodegradation efficiency of bioreactor trials and compost quality of the co-composting system were assessed by visible spectrophotometry and by a phytotoxicity test. The co-composting system (dry weight (dw) basis) consisted of 200 g of restaurant organic residues + 200 g sewage sludge (or 100 mL sewage wastewater, or 200 g textile sludge) + 100 mL of a 10% dye solution (Reactive Red 195, or Synolon Brown, or Orange Remazol, or Yellow Synozol, or Reactive Orange 122, or Reactive Black 5). After 60 days of composting, all dyes were biodegraded according to spectrophotometric data, with efficiency varying from 97.2 to 99.9%. Inoculum efficiency ranking was textile sludge > sewage sludge > sewage wastewater. Regarding compost quality, a phytotoxicity study with lettuce showed no toxicity effect. Thus, co-composting can be a low-cost and efficient method for recalcitrant textile dye biodegradation and for managing textile sludge in terms of waste recycling, contributing to environmental sustainability.

Degradation of recalcitrant textile azo-dyes by fenton-based process followed by biochar polishing

The use of advanced oxidative processes (AOPs) is an efficient alternative for the treatment of textile wastewaters. The aim of this study was to assess the dye removal efficiency of a Fenton-based degradation process followed by a polishing step using biochar prepared from rice husk. Six recalcitrant textile dyes - Reactive Red 195 (D1), Synolon Brown S2 (D2), Orange Remazol RGB (D3), Yellow Synozol K3 (D4), Reactive Orange (D5), and Reactive Black 5 (D6) - were treated with Fenton and photo-Fenton processes (with and without biochar polishing) under optimized conditions. The results showed a general efficiency ranking: photo-Fenton + biochar ≈ Fenton + biochar > photo-Fenton ≈ Fenton. The Fenton process was also efficient for the regeneration of the dye-saturated biochar. The photo-Fenton + biochar process achieved the following color removal percentages: D1 (98.8%), D2 (99.7%), D3 (98.9%), D4 (96.3%), D5 (94.2%) and D6 (94.8%). This process was applied to a real conventionally-treated textile wastewater and analysis showed a reduction in BOD (87.5% degradation), COD (62.5% degradation) and color (93.5% mean removal). These results reveal the possibility for the reuse of the treated water for non-potable industrial uses, for example, floor washing or the cleaning of machines and toilet areas.

Petroleum-contaminated soil: using sonolysis to improve mineralization and biodegradation potential of Fenton reaction and ozonolysis process

The degradation efficiency of the Fenton reaction or ozonolysis (O₃) to treat soil contaminated by crude petroleum was studied in association with the sonolysis process. To quantify oxidation efficiency, total organic carbon (TOC) and chemical oxygen demand (COD) were measured, while biochemical oxygen demand (BOD₅) was measured to estimate biodegradation potential. TOC removal efficiency ranged from 9 to 52% to the Fenton reaction without sonolysis, and 18% and 78% with sonolysis for reagent concentrations of 1% H₂O₂-100 mM Fe²⁺ and 20% H₂O₂-1 mM Fe²⁺, respectively. For ozonolysis (after 10 and 60 min of treatment), the reduction in TOC ranged from 9 to 43% without sonolysis and 15 to 61% with sonolysis. The Fenton reaction without sonolysis increased the biodegradability in relation to the non-oxidized sample by 6% (1% H₂O₂-100 mM Fe²⁺) and 26% (20% H₂O₂-1 mM Fe²⁺), and with sonolysis the corresponding values were 13% and 42%, respectively. The biodegradation potential under ozonolysis without sonolysis increased from 0.18 (10 min of treatment) to 0.38 (30 min of treatment), and with sonolysis these values were 0.26 and 0.58, respectively. Optimization of the remediation processes is essential to determine sequential treatment order and efficiency.