Assessing the impact of climate change on water requirement and yield of sugarcane over different agro-climatic zones of Tamil Nadu

The DSSAT CANEGRO model was calibrated and verified using field experimental data from five Tamil Nadu Agroclimatic Zones (1981-2022). The genetic coefficients of the sugarcane cultivar (CO-86032) were calculated. R2 obtained between measured and simulated stalk fresh mass was 0.9 with the nRMSE (0.01) and RMSE (1.6) and R2 between measured and simulated sucrose mass was 0.9 with the nRMSE (0.16) and RMSE (1.2). For yield R2 obtained between measured and simulated was 0.9 with the nRMSE (0.01) and RMSE (1.6). As a result, the CANEGRO model may be used to mimic the phenology and yield features of the sugarcane cultivar in Tamil Nadu's Agro Climatic Zones. Temperature increases in Agro Climatic Zones resulted in varying yield reductions, with 2 °C increases causing a 3% loss, 3 °C increases 5%, and 4 °C increases 9%. The Water Requirement rose throughout all of the ACZ due to the high temperature, but to differing degrees. A 2 °C increase often results in an average 4% increase in the WR. 3 °C rise in temperature increased WR to 9% and WR rose by 13% when the temperature was raised by 4 °C.

OP0254 CHROMATIN CONFORMATION SIGNATURE ANALYSIS IN EARLY VS LATE SCLERODERMA PHENOTYPES

Background:

Systemic sclerosis (scleroderma, SSc) is a heterogeneous disease in which clinical outcomes vary widely. Predicting outcomes on an individual basis remains challenging despite progress made through autoantibody analysis and gene expression profiling. Effective targeted therapies are evolving and accurately predicting outcomes is important to enable patient stratification for therapy.

Chromatin Conformation Signature (CCS) profiling of peripheral blood for systemic epigenetic deregulations could be used for such a purpose. The EpiSwitch platform offering high throughput and resolution chromosome conformation (3C) capture detects significant regulatory changes in 3D genome architecture and maps long range interaction between distant genomic locations. This then reveals the spatial disposition and physical properties of the chromosome, such as chromatin loops and inter-chromosomal connections, which have a role in network organization and genetic epistasis controlling gene expression. EpiSwitch automated platform has been successfully utilised in patient stratification in RA, MS and other indications.

This methodology could be applied to patients with SSc to identify CCS associated with different phenotypes and may ultimately be used to stratify and identify patients into pathogenic subtypes.

Objectives:

We aimed to determine significant CCSs associated with early and late phenotypes of SSc.

Methods:

The EpiSwitch-based chromosome conformation capture (3C) method was applied to blood samples from early phenotype, and late phenotype SSc patients. Intact nuclei were isolated from peripheral blood mononuclear cells and subjected to formaldehyde fixation resulting in crosslinking between physically touching segments of the genome via contacts between their DNA bound proteins. For quantification of cross-linking frequencies, the cross linked DNA was digested and then subjected to ligation. Cross-linking was then reversed and individual ligation products detected and quantified by EpiSwitch custom oligo array annotated across the whole genome to the anchoring sites of 3D genome architecture.

Results:

7 significant CCSs were found over the HLA-C, HLA-B and TNF regions on Chromosome 6 in the early phenotype. The top 8 pathways for genetic locations associated to the CCSs are shown in Table 1.

Table 1.

Top 8 pathways for genetic locations associated to significant CCS for the early phenotype.

GeneSet1Natural Killer cell mediated cytotoxicity2Immunoregulatory interations between a lymphoid cell and a non-lymphoid cell3Antigen Processing & presentation4Phagosome5Graft versus host disease6Type 1 diabetes mellitus7Osteoclast differentiation8Class 1 MHC mediated antigen processing & presentation

2 significant CCSs were found centred around the IFNG region of chromosome 12 in the late phenotype. The top 8 pathways for genetic locations associated to significant CCSs are shown in Table 2.

Table 2.

Top 8 pathways for genetic locations associated to significant CCS for the late phenotype.

GeneSet1Surfactant metabolism2IL12 signalling mediated by STAT43Protein digestion & absorption4Calcineruin regulated NFAT dependent transcription in lymphocytes5Transcriptional misregulation in cancer6Kaposi’s sarcoma associated herpes virus infection7IL2 mediated signalling events8Inflammatory bowel disease

Conclusion:

Significant CCSs, as part of 3D genomic regulatory control, and their associated pathways for the genetic locations, were identified in both late and early phenotypes. There were distinct CCSs in the early phenotype compared to the late suggesting the CCSs change as the disease progresses and varies between phenotypes. If CCSs could be linked to each clinically defined subgroup across a SSc cohort they could be used as a biomarker tool to predict outcome and progression in patients.

Disclosure of Interests:

Megan Galloway: None declared, Ewan Hunter: None declared, Alexandre Akoulitchev: None declared, Shivanee Vigneswaran: None declared, Bahja Abdi: None declared, Christopher Denton Grant/research support from: GlaxoSmithKline, Inventiva, CSF Behring, Consultant of: Roche-Genentech, Actelion, GlaxoSmithKline, Sanofi Aventis, Inventiva, CSL Behring, Boehringer Ingelheim, Bayer, David Abraham: None declared, Richard Stratton: None declared

In vitro and in silico investigation of caprylic acid effect on multi drug resistant (MDR) Klebsiella pneumoniae biofilm

Communicated by Ramaswamy H. Sarma.

Phosphate adsorption from wastewater using zirconium (IV) hydroxide: Kinetics, thermodynamics and membrane filtration adsorption hybrid system studies

Excessive phosphate in wastewater should be removed to control eutrophication of water bodies. The potential of employing amorphous zirconium (Zr) hydroxide to remove phosphate from synthetic wastewater was studied in batch adsorption experiments and in a submerged membrane filtration adsorption hybrid (MFAH) reactor. The adsorption data satisfactorily fitted to Langmuir, pseudo-first order and pseudo-second order models. Langmuir adsorption maxima at 22 °C and pHs of 4.0, 7.1, and 10.0 were 30.40, 18.50, and 19.60 mg P/g, respectively. At pH 7.1 and temperatures of 40 °C and 60 °C, they were 43.80 and 54.60 mg P/g, respectively. The thermodynamic parameters, ΔG° and ΔS° were negative and ΔH° was positive. FTIR, zeta potential and competitive phosphate, sulphate and nitrate adsorption data showed that the mechanism of phosphate adsorption was inner-sphere complexation. In the submerged MFAH reactor experiment, when Zr hydroxide was added at doses of 1-5 g/L once only at the start of the experiment, the removal of phosphate from 3 L of wastewater containing 10 mg P/L declined after 5 h of operation. However, when Zr hydroxide was repeatedly added at 5 g/L dose every 24 h, satisfactory removal of phosphate was maintained for 3 days.

Adsorptive removal of heavy metals from water using sodium titanate nanofibres loaded onto GAC in fixed-bed columns

Heavy metals are serious pollutants in aquatic environments. A study was undertaken to remove Cu, Cd, Ni, Pb and Zn individually (single metal system) and together (mixed metals system) from water by adsorption onto a sodium titanate nanofibrous material. Langmuir adsorption capacities (mg/g) at 10(-3)M NaNO3 ionic strength in the single metal system were 60, 83, 115 and 149 for Ni, Zn, Cu, and Cd, respectively, at pH 6.5 and 250 for Pb at pH 4.0. In the mixed metals system they decreased at high metals concentrations. In column experiments with 4% titanate material and 96% granular activated carbon (w/w) mixture at pH 5.0, the metals breakthrough times and adsorption capacities (for both single and mixed metals systems) decreased in the order Pb>Cd, Cu>Zn>Ni within 266 bed volumes. The amounts adsorbed were up to 82 times higher depending on the metal in the granular activated carbon+titanate column than in the granular activated carbon column. The study showed that the titanate material has high potential for removing heavy metals from polluted water when used with granular activated carbon at a very low proportion in fixed-bed columns.

Competitive adsorption of metals on cabbage waste from multi-metal solutions

This study assessed the adsorption capacity of the agro-waste 'cabbage' as a biosorbent in single, binary, ternary and quaternary sorption systems with Cu(II), Pb(II), Zn(II) and Cd(II) ions. Dried and ground powder of cabbage waste (CW) was used for the sorption of metals ions. Carboxylic, hydroxyl, and amine groups in cabbage waste were found to be the key functional groups for metal sorption. The adsorption isotherms obtained could be well fitted to both the mono- and multi-metal models. In the competitive adsorption systems, cabbage waste adsorbed larger amount of Pb(II) than the other three metals. However, the presence of the competing ions suppressed the sorption of the target metal ions. Except the case of binary system of Cd(II)-Zn(II) and Cd(II)-Cu(II), there was a linear inverse dependency between the sorption capacities and number of different types of competitive metal ions.

Forward osmosis for the treatment of reverse osmosis concentrate from water reclamation: process performance and fouling control

While high quality water reuse based on dual membrane filtration (membrane filtration or ultrafiltration, followed by reverse osmosis) is expected to be progressively applied, treatment and sustainable management of the produced reverse osmosis concentrate (ROC) are still important issues. Forward osmosis (FO) is a promising technology for maximising water recovery and further dewatering ROC so that zero liquid discharge is produced. Elevated concentrations of organic and inorganic compounds may act as potential foulants of the concentrate desalting system, in that they consist of, for example, FO and a subsequent crystallizer. The present study investigated conditions under which the FO system can serve as concentration phase with the focus on its fouling propensity using model foulants and real ROC. Bulk organics from ROC consisted mainly of humic acids (HA) and building blocks since wastewater-derived biopolymers were retained by membrane filtration or ultrafiltration. Organic fouling of the FO system by ROC-derived bulk organics was low. HA was only adsorbed moderately at about 7% of the initial concentration, causing a minor flux decline of about 2-4%. However, scaling was a major impediment to this process if not properly controlled, for instance by pH adjustment or softening.

Performance of submerged membrane bioreactor (SMBR) with and without the addition of the different particle sizes of GAC as suspended medium

In this study the effect of different particle sizes of granular activated carbon (GAC) on the performance of a submerged membrane bioreactor (SMBR) was investigated. The sizes of GAC used were 150-300, 300-600 and 600-1200 μm. The SMBR was operated at a filtration flux of 20 L/m(2)h. The removal of dissolved organic carbon (DOC) and chemical oxygen demand (COD) with the addition of GAC was 95%. The concentration of biopolymers, humic, building block and low molecular weight neutral and acids in the SMBR effluent was reduced by 20%, 66-76%, 20-50%, 30-56%, respectively. It helped to reduce the sludge volume index (SVI) and transmembrane pressure (TMP) development by 30-40% and 58%, respectively. However, the removal of NH₄(+) and PO₄(3-) was relatively low of 35-45% and 34-43%, respectively. The SMBR effluent was rich in PO₄(3-) and was removed/recovered using hydrated ferric oxide (HFO). The removal of PO₄(3-) was almost 90%.

Effect of imposed flux on fouling behavior in high rate membrane bioreactor

The influence of imposed flux and aeration rates on membrane fouling in a submerged membrane bioreactor was studied. The experiments were conducted at four imposed fluxes and three aeration rates. The effect of flux on the reduction of membrane fouling was much higher than that caused by aeration rate. A lower flux of 20 L/m(2) h produced 75 times more water than a higher flux of 40 L/m(2) h with an aeration rate of 2 L/min. Low flux showed slightly higher removal of NH(4)-N and 93-96% removal of dissolved organic matter and chemical oxygen demand. Imposed flux also had a significant effect on the composition of organics present in the soluble microbial product (SMP) and extracellular polymeric substances (EPS). At a higher flux, both SMP and EPS had organics of high molecular weight (MW) of around 48 kDa as well as lower MW organics below 200 Da.

Effect of organic loading rate on organic matter and foulant characteristics in membrane bio-reactor

In this study, the influence of organic loading rate (OLR) on the performance of a membrane bio-reactor (MBR) was investigated. The MBR was operated with 6 different OLRs between 0.5 and 3.0 kg COD/m(3)d. The hydrodynamic parameters of the MBR were kept constant. The hydraulic retention time and sludge retention time were kept at 8h and 40 d respectively. From the experimental investigation, it was found that the removal efficiency of DOC, COD and NH(4)-N decreased when OLRs were increased from 0.5 to 3.0 kg COD/m(3)d. Higher OLRs of 2.75-3.0 kg COD/m(3)d resulted in a higher transmembrane pressure development. The fractionation of organic matters showed more hydrophilic substances with higher OLRs. A detailed organic matter characterization of membrane foulant, soluble microbial product and extracellular polymeric substances showed that bio-polymers type substances together with humic acid and lower molecular neutral and acids were responsible for membrane fouling.

How to optimize hollow-fiber submerged membrane bioreactors

Membrane fouling is linked to reversible or irreversible accumulation of macromolecules and solids on membrane surfaces and to the irreversible adsorption inside pores. If reversible accumulation can be controlled by filtering in subcritical conditions, then adsorption could also be minimized by reducing the soluble organic matter [extracellular polymeric substances, soluble microbial products (SMP)]. This research shows how the choice of operating parameters related to biological reaction (solid retention time and the organic loading rate) can influence the process rate and the by-product (SMP) production. It also illustrates how suspension characteristics and membrane aeration can influence membrane fouling control according to the hollow fiber configuration and to the different scales of observation. The investigations were based on the definition of different fouling level and fine-tuning of a model to better understand the effects of operating parameters on membrane bioreactor filtration.

Synergistic effect of biological activated carbon and enhanced coagulation in secondary wastewater effluent treatment

The use of secondary wastewater effluent (SWWE) is an essential strategy for making better use of limited water resources. However, a wide range of organic compounds eventually renders them unsuitable for recycling. In water treatment processes, biologically activated carbon (BAC) is adopted after physicochemical treatment. However, the effectiveness of such combination for SWWE remains poorly understood. This study investigates the effectiveness of various combinations: BAC/enhanced coagulation (EC) or EC/BAC, especially in terms of dissolved organic carbon (DOC) removal. The results showed that distinct advantage could be obtained by adopting BAC/EC combination rather than EC/BAC, as microbes in BAC not only remove non-coagulable compounds but also synergize the removal efficiency by releasing some coagulable humic substances.

Biofiltration as pre-treatment to water harvesting and recycling

This paper presents the results of the long term biofilter experiments conducted with raw stormwater collected from a canal at Carlton, in Sydney. Anthracite and granular activated carbon (GAC) were used as a single filter media in biofilter columns. Media heights of 75 and 40 cm were used. The filter columns were operated at filtration velocities of 0.12 and 0.25 m/h. The removal efficiency for turbidity and DOC for the GAC filter media were found to be 75% and almost 100% respectively. The removal efficiency for the anthracite filter was much lower. Molecular weight distribution analysis showed an almost similar trend to the DOC removal. Compared with anthracite filter media, the GAC biofilter removed a much larger range of organic compounds present in the stormwater. The GAC biofilter removes organic matter earlier as compared to anthracite. Based on a limited sample of stormwater, the removal efficiency for phosphorus was upto 74% and that of nitrogen was up to 30%. In general GAC filter shows higher heavy metal removal efficiency than anthracite. The removal of zinc, iron, lead and nickel were good. However the concentration of heavy metal in the raw surface water sample was low.

A novel integrated assessment methodology of urban water reuse

Wastewater is no longer considered a waste product and water reuse needs to play a stronger part in securing urban water supply. Although treatment technologies for water reclamation have significantly improved the question that deserves further analysis is, how selection of a particular wastewater treatment technology relates to performance and sustainability? The proposed assessment model integrates; (i) technology, characterised by selected quantity and quality performance parameters; (ii) productivity, efficiency and reliability criteria; (iii) quantitative performance indicators; (iv) development of evaluation model. The challenges related to hierarchy and selections of performance indicators have been resolved through the case study analysis. The goal of this study is to validate a new assessment methodology in relation to performance of the microfiltration (MF) technology, a key element of the treatment process. Specific performance data and measurements were obtained at specific Control and Data Acquisition Points (CP) to satisfy the input-output inventory in relation to water resources, products, material flows, energy requirements, chemicals use, etc. Performance assessment process contains analysis and necessary linking across important parametric functions leading to reliable outcomes and results.

Preparation of titanium dioxide nanoparticles from electrocoagulated sludge using sacrificial titanium electrodes

A comprehensive investigation of electrocoagulation using sacrificial titanium (Ti) electrodes in wastewater was carried out. The effects of specific process variables, such as initial pH, mixing, current density, initial organic loading, and ionic/electrolyte strength were first optimized to produce recyclable Ti-based sludge. The sludge was incinerated at 600 degrees C to produce functional TiO(2) photocatalyst. X-ray diffraction analysis revealed that TiO(2) produced at optimum electrocoagulation conditions was mostly anatase structure. The specific surface area of the synthesized TiO(2) photocatalyst was higher than that of the commercially available and widely used Degussa P-25 TiO(2). Furthermore, energy dispersive X-ray and X-ray photoelectron spectroscopy analyses showed that in additional to titanium and oxygen, this photocatalyst is also composed of carbon and phosphorus. These elements were mainly doped as a substitute site for the oxygen atom. Transmission electron microscopy images exhibited sharply edged nanorods, round nanoparticles, and nanotubes with nonuniform shapes showing some structural defects. Photodecomposition of gaseous acetaldehyde by this photocatalyst was also conducted under UV and visible light irradiation to study the photocatalytic properties of the doped TiO(2) photocatalyst. While no photocatalytic activity was observed under visible light irradiation, this doped TiO(2) photocatalyst exhibited high photocatalytic activity under UV light.

Hybrid filtration method for pre-treatment of stormwater

In this study the hybrid filtration process (combining fibre filter with deep bed dual media filtration) was investigated as pre-treatment to stormwater. This process was investigated in-terms of reduction in turbidity, dissolved organic carbon (DOC), colour, headloss development across the filters, suspended solids removal, organic matter removal, nutrients and heavy matter (such as iron, copper, lead, zinc) removal efficiency. A comparison was made between the hybrid filter with single media (sand) deep bed filter and fibre filter. It was found that the hybrid filtration system successfully removed turbidity (98%), colour (99%), suspended solids (99%), and DOC (55%). The removal efficiency of heavy metal was relatively low as the concentration of heavy metals present in stormwater was low. The removal efficiency of nitrate, nitrite and phosphorous (as orthophosphate) was 27, 35 and 72% respectively. Hybrid filtration processes showed a better reduction of Modified Fouling Index (MFI) value (from 15.500 s/l(2) to 9 s/l(2)) compared with single media sand, anthracite and fibre filter which were 35 s/l(2), 13 s/l(2)and 14 s/l(2) respectively when operated at FeCl(3) dose of 15 mg/l.

Membranes coupled with physico chemical treatment in water reuse

In this study, short-term experiments were conducted with different configurations of membrane hybrid systems to treat biological treated sewage effluent containing refractory organic pollutants: (i) submerged hollow fiber microfiltration (SMF) alone; (ii) spiral flocculator (SF)-SMF without settling; (iii) SF-PAC-SMF without settling and (iv) SMF with magnetic ion exchange resin MIEX pretreatment. The results indicated that the pre-flocculation of SF could improve the mitigation of membrane fouling significantly even when the system was operated at a high membrane filtration rate. The transmembrane pressure (TMP) of SF-PAC-SMF only increased marginally (0.8 kPa over 8 hours). SF-SMF without the addition of powdered activated carbon (PAC) also took a relatively long duration for the TMP to increase. The TMP only increased by 2.5 kPa over 8 hours. The SF-PAC-MF system resulted in a high dissolved organic carbon (DOC) removal of more than 96%. When used as pre-treatment to submerged membranes, the fluidized bed MIEX contactor could remove a significant amount of organic matter in wastewater. This pre-treatment helped to reduce the membrane fouling and kept the TMP low during the membrane operation.

Valuing stormwater, rainwater and wastewater in the soft path for water management: Australian case studies

A Water Sensitive City is now commonly acknowledged best practice for designing the cities of the future. In Australia, the National Water Initiative has allocated high priority towards offering insight into successful water sensitive urban development projects, to facilitate capacity building within the industry. This paper shares innovative water sensitive projects implemented at Kogarah City Council, in Sydney. Four key projects are discussed, demonstrating how stormwater, rainwater and wastewater can be incorporated into decentralised water systems to offer sustainable water management of the future. The case studies included in the paper highlight Kogarah's journey towards the Soft Path for Water Management.

Analysis of first flush to improve the water quality in rainwater tanks

Although most Australians receive their domestic supply from reticulated mains or town water, there are vast areas with very low population densities and few reticulated supplies. In many of these areas rainwater collected in tanks is the primary source of drinking water. Heavy metals have recently become a concern as their concentration in rain water tanks was found to exceed recommended levels suitable for human consumption. Rainwater storage tanks also accumulate contaminants and sediments that settle to the bottom. Although not widely acknowledged, small amounts of contaminants such as lead found in rain water (used as drinking water) may have a cumulative and poisonous effect on human health over a life time. This is true for certain factors that underlie many of the chronic illnesses that are becoming increasingly common in contemporary society. The paper reports on a study which is part of a project that aims to develop a cost effective in-line filtration system to improve water quality in rainwater tanks. To enable this, the characteristics of rainwater need to be known. One component of this characterization is to observe the effects of the first flush on a rainwater tank. Samples of the roof runoff collected from an urban residential roof located in the Sydney Metropolitan Area in the initial first few millimetres of rain were analysed. The results show that bypassing the first 2 mm of rainfall gives water with most water quality parameters compliant with the Australian Drinking Water Guidelines (ADWG) standards. The parameters that did not comply were lead and turbidity, which required bypassing approximately the first 5 mm of rainfall to meet ADWG standards. Molecular weight distribution (MWD) analysis showed that the concentration of rainwater organic matter (RWOM) decreased with increasing amount of roof runoff.

Influence of buoyant media on particle layer dynamics in microfiltration membranes

This study forms a part of the physical study of the membrane bioreactor in presence of buoyancy media. Kaolin clay suspension with buoyancy media (anthracite) was used as a suspension and the particle layer development on membrane surface with evolution of time was studied. Presence of buoyancy media reduced the pressure development by almost two folds compared to in absence of the media. The particles deposition on membrane surface was size selective. The mean particle diameter (0.45 mum) deposited on the membrane surface remained almost similar in presence of the media after 7 hrs run where as in its absence the mean diameter finer particles deposition occurred at the beginning followed by coarser particles.

Water quality characterisation of rainwater in tanks at different times and locations

Rainwater collected from ten domestic roofs in Sydney and from one in Wollongong, a town south of Sydney, Australia was analysed to determine the water quality and to compare against the Australian Drinking Water Guidelines (ADWG) to determine its suitability as a potable water supply. The pollutants analysed were 13 heavy metals, 8 salts & minerals, pH, ammonia, orthophosphate, conductivity, water hardness, turbidity, total suspended solids, Total dissolved salts & Bicarbonate. The results indicate that the rainwater tested complied to most of the parameters specified in the ADWG. Molecular weight distribution of organic matter from one of the domestic rainwater tanks was analysed in terms of the effects of aging and roof contact. Molecular weight distribution of organic matter in rainwater showed prominent peaks at 37,500 daltons may be due to biopolymers, 850 Da to humic substances, 500 Da to building blocks, 220 Da to low MW acids, and less than 220 Da to amphiphilics. The findings also indicate that the first flush volumes that by-passed the tank can have a significant influence on the water quality in the rainwater tank.

Preparation of titanium dioxide (TiO2) from sludge produced by titanium tetrachloride (TiCl4) flocculation of wastewater

Sludge disposal is one of the most costly and environmentally problematic challenges of modern wastewater treatment worldwide. In this study, a new process was developed, which has a significant potential for lower cost of waste disposal, protection of the environment and public health, and yield of economically useful byproducts. Titanium oxide (TiO2), which is the most widely used metal oxide, was produced from the wastewater sludge generated by the flocculation of secondary wastewater with titanium tetrachloride (TiCl4). Detailed analyses were conducted to compare TiCl4, ferric chloride (FeCl3), and aluminum sulfate (Al2(SO4)3) flocculation. Removal of organic matter and different molecular sizes by Ti-salt flocculation was similar to that of the most widely used Fe- and Al-salt flocculation. The mean size of Ti-, Fe-, and Al-salt flocs was 47.5, 42.5, and 16.9 microm, respectively. The decantability of the settled flocs by TiCl4 coagulant was similar to that by FeC13 coagulant and much higher than that of Al2(SO4)3. The photocatalyst from wastewater (PFW) produced by TiCl4 flocculation was characterized by X-ray diffraction, BET surface area, scanning electron microscopy/energy dispersive X-ray, transmission electron microscopy, photocatalytic activity, and X-ray photoelectron spectroscopy. The resulting PFW was found to be superior to commercial TiO2 (P-25) in terms photocatalytic activity and surface area. The PFW as also found to be mainly doped with C and P atoms. The atomic percentage of the PFW was TiO(1.42)C(0.44)P(0.14).

Development of a confined water sensitive urban design (WSUD) system using engineered soils

Innovative Water Sensitive Urban Design (WSUD) systems are being investigated at three locations to the north and south of Sydney, Australia. These systems contain porous concrete pipes that are designed so that stormwater exfiltrates through the permeable walls of the pipes into the surrounding substrate media material. The porous pipes and media material treat the passing stormwater. The primary aim of the overall project is to develop a model to describe the treatment effectiveness of confined WSUD systems. This paper focuses on the system located at the Weathertex Industrial Site, Heatherbrae. Due to wood processing operations that occur at this site, it is recognised that the surface runoff will carry a heavy organics loading. Granulated Activated Carbon (GAC) is recognised for its ability to reduce the concentration of dissolved organics present in both wastewater and stormwater. GAC was therefore chosen as a filtration medium to be investigated at this site. To maximise the effectiveness of the GAC, extensive laboratory batch studies were undertaken prior to the field system being constructed to determine the optimum GAC/sand ratio. The purpose of the experimental work was to assess the dissolved organic removal potential through sorption of various concentrations of GAC. The aim of this paper is to describe these laboratory experiments and discuss how they related to the field system. Through these experiments it was determined that a sand/GAC ratio of 25:1 was ideal for the media material at the Heatherbrae site.

Application of an automation system and a supervisory control and data acquisition (SCADA) system for the optimal operation of a membrane adsorption hybrid system

The application of automation and supervisory control and data acquisition (SCADA) systems to municipal water and wastewater treatment plants is rapidly increasing. However, the application of these systems is less frequent in the research and development phases of emerging treatment technologies used in these industries. This study involved the implementation of automation and a SCADA system to the submerged membrane adsorption hybrid system for use in a semi-pilot scale research project. An incremental approach was used in the development of the automation and SCADA systems, leading to the development of two new control systems. The first system developed involved closed loop control of the backwash initiation, based upon a pressure increase, leading to productivity improvements as the backwash is only activated when required, not at a fixed time. This system resulted in a 40% reduction in the number of backwashes required and also enabled optimised operations under unsteady concentrations of wastewater. The second system developed involved closed loop control of the backwash duration, whereby the backwash was terminated when the pressure reached a steady state. This system resulted in a reduction of the duration of the backwash of up to 25% and enabled optimised operations as the foulant build-up within the reactor increased.

Chemical coupling of photocatalysis with flocculation and adsorption in the removal of organic matter

An experimental investigation was made to study the effects of chemical coupling of flocculation and adsorption with photocatalysis in treating persistent organic pollutants in wastewater. The photocatalysis alone showed initial reverse reaction when titanium oxide (TiO(2)) was used in catalysis. The effect of the pretreatment of adsorption with powdered activated carbon (PAC) on photocatalysis was studied. The results showed that PAC adsorption followed by photocatalysis was not effective in alleviating reverse reaction. On the other hand, when PAC and TiO(2) were added simultaneously, the reverse reaction was eliminated. Further, the organic removal was also improved by simultaneous PAC and TiO(2) additions. When flocculation with ferric chloride (FeCl(3)) was used as pretreatment, the organic removal efficiency was superior. The initial reverse reaction was also eliminated/minimized. However, inadequate doses of FeCl(3) (less than 30 mgl(-1)) resulted in initial reverse reaction and inferior DOC removal.

Influence of flocculation and adsorption as pretreatment on the fouling of ultrafiltration and nanofiltration membranes: application with biologically treated sewage effluent

Membrane fouling is a critical limitation on the application of membranes to wastewater reuse. This work aims to understand the fouling phenomenon which occurs in ultrafiltration (UF; 17500 molecular weight cutoff (MWCO)) and nanofiltration (NF; 250 MWCO) membranes, with and without pretreatment. For this purpose, the molecular weight (MW) distribution of the organics has been used as a parameter to characterize the influent, the permeate, and the foulant on the membrane surface. The variation of foulant concentration on the membrane due to pretreatment of the influent by flocculation and/or adsorption was investigated in detail. With the UF membrane, the peak of the MW distribution of organics in the permeate depended on the pretreatment; for example, the weight-averaged MW (Mw) of 675 without pretreatment shifted down to 314 with pretreatment. In the case of the NF membrane, the Mw of organics in the permeate was 478 (without pretreatment) and 310 (with flocculation followed by adsorption). The Mw of the organics in the foulant on the membrane surface was 513 (UF) and 192 (NF) without pretreatment and 351 (UF) and 183 (NF) after pretreatment with flocculation followed by adsorption, respectively. Without the pretreatment, the foulant concentration was higher on both membranes. The difference was more significant on the UF membrane than on the NF membrane. For both membranes, the flocculation-and-then-adsorption pretreatment proved very effective.