Energy Level-Graded Al-Doped ZnO Protection Layers for Copper Nanowire-Based Window Electrodes for Efficient Flexible Perovskite Solar Cells

Flexible perovskite solar cells (PSCs) have attracted significant interest as promising candidates for portable and wearable devices. Copper nanowires (CuNWs) are promising candidates for transparent conductive electrodes for flexible PSCs because of their excellent conductivity, flexibility, and cost-effectiveness. However, because of the thermal/chemical instability of CuNWs, they require a protective layer for application in PSCs. Previous PSCs with CuNW-based electrodes generally exhibited poor performances compared with their indium tin oxide-based counterparts because of the neglect of the interfacial energetics between the electron transport layer (ETL) and CuNWs. Herein, an Al-doped ZnO (AZO) protective layer fabricated using atomic layer deposition is introduced. The AZO/CuNW-based composite electrode exhibits improved thermal/chemical stability and favorable band alignment between the ETL and CuNWs, based on the Al dopant concentration tuning. As a result, the Al content gradient AZO (g-AZO), composed of three successively deposited AZO layers, leads to highly efficient flexible PSCs with a power conversion efficiency (PCE) of 14.18%, whereas the PCE of PSCs with a non-g-AZO layer is 12.34%. This improvement can be attributed to the efficient electron extraction and reduced charge recombination. Furthermore, flexible PSCs based on g-AZO-based composite electrodes retain their initial PCE, even after 600 bending cycles, demonstrating excellent mechanical stability.

Strain-Mediated Phase Stabilization: A New Strategy for Ultrastable α-CsPbI3 Perovskite by Nanoconfined Growth

All-inorganic cesium lead triiodide (CsPbI₃ ) perovskite is considered a promising solution-processable semiconductor for highly stable optoelectronic and photovoltaic applications. However, despite its excellent optoelectronic properties, the phase instability of CsPbI₃ poses a critical hurdle for practical application. In this study, a novel stain-mediated phase stabilization strategy is demonstrated to significantly enhance the phase stability of cubic α-phase CsPbI₃ . Careful control of the degree of spatial confinement induced by anodized aluminum oxide (AAO) templates with varying pore sizes leads to effective manipulation of the phase stability of α-CsPbI₃ . The Williamson-Hall method in conjunction with density functional theory calculations clearly confirms that the strain imposed on the perovskite lattice when confined in vertically aligned nanopores can alter the formation energy of the system, stabilizing α-CsPbI₃ at room temperature. Finally, the CsPbI₃ grown inside nanoporous AAO templates exhibits exceptional phase stability over three months under ambient conditions, in which the resulting light-emitting diode reveals a natural red color emission with very narrow bandwidth (full width at half maximum of 33 nm) at 702 nm. The universally applicable template-based stabilization strategy can give in-depth insights on the strain-mediated phase transition mechanism in all-inorganic perovskites.

All-Solution-Processed Thermally and Chemically Stable Copper-Nickel Core-Shell Nanowire-Based Composite Window Electrodes for Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (PSCs) have recently attracted tremendous attention because of their excellent efficiency and the advantage of a low-cost fabrication process. As a transparent electrode for PSCs, the application of copper nanowire (CuNW)-network was limited because of its thermal/chemical instability, despite its advantages in terms of high optical/electrical properties and low-cost production. Here, the copper-nickel core-shell nanowire (Cu@Ni NW)-based composite electrode is proposed as a bottom window electrode for PSCs, without the involvement of a high-cost precious metal and vacuum process. The dense and uniform Ni protective shell for CuNWs is attainable by simple electroless plating, and the resulting Cu@Ni NWs exhibit outstanding chemical stability as well as thermal stability compared with bare CuNWs. When the Ni layer with the optimal thickness is introduced, the Cu@Ni NW electrode shows a high transmittance of 80.5% AVT at 400-800 nm, and a sheet resistance of 49.3 ± 5 Ω sq^-1. Using the highly stable Cu@Ni NWs, the composite electrode structure is fabricated with sol-gel-derived Al-doped zinc oxide (AZO) over-layer for better charge collection and additional protection against iodine ions from the perovskite. The PSCs fabricated with AZO/Cu@Ni NW-based composite electrode demonstrate a power conversion efficiency (PCE) of 12.2% and excellent long-term stability maintaining 91% of initial PCE after being stored for 500 h at room temperature. Experimental results demonstrate the potential of highly stable Cu@Ni NW-based electrodes as the cost-effective alternative transparent electrode, which can facilitate the commercialization of PSCs.

Investigating Recombination and Charge Carrier Dynamics in a One-Dimensional Nanopillared Perovskite Absorber

Organometal halide perovskite materials have become an exciting research topic as manifested by intense development of thin film solar cells. Although high-performance solar-cell-based planar and mesoscopic configurations have been reported, one-dimensional (1-D) nanostructured perovskite solar cells are rarely investigated despite their expected promising optoelectrical properties, such as enhanced charge transport/extraction. Herein, we have analyzed the 1-D nanostructure effects of organometal halide perovskite (CH₃NH₃PbI_{3- x}Cl _x) on recombination and charge carrier dynamics by utilizing a nanoporous anodized alumina oxide scaffold to fabricate a vertically aligned 1-D nanopillared array with controllable diameters. It was observed that the 1-D perovskite exhibits faster charge transport/extraction characteristics, lower defect density, and lower bulk resistance than the planar counterpart. As the aspect ratio increases in the 1-D structures, in addition, the charge transport/extraction rate is enhanced and the resistance further decreases. However, when the aspect ratio reaches 6.67 (diameter ∼30 nm), the recombination rate is aggravated due to high interface-to-volume ratio-induced defect generation. To obtain the full benefits of 1-D perovskite nanostructuring, our study provides a design rule to choose the appropriate aspect ratio of 1-D perovskite structures for improved photovoltaic and other optoelectrical applications.

Facile Sol-Gel-Derived Craterlike Dual-Functioning TiO2 Electron Transport Layer for High-Efficiency Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (PSCs) are considered promising materials for low-cost solar energy harvesting technology. An electron transport layer (ETL), which facilitates the extraction of photogenerated electrons and their transport to the electrodes, is a key component in planar PSCs. In this study, a new strategy to concurrently manipulate the electrical and optical properties of ETLs to improve the performance of PSCs is demonstrated. A careful control over the Ti alkoxide-based sol-gel chemistry leads to a craterlike porous/blocking bilayer TiO₂ ETL with relatively uniform surface pores of 220 nm diameter. Additionally, the phase separation promoter added to the precursor solution enables nitrogen doping in the TiO₂ lattice, thus generating oxygen vacancies. The craterlike surface morphology allows for better light transmission because of reduced reflection, and the electrically conductive craterlike bilayer ETL enhances charge extraction and transport. Through these synergetic improvements in both optical and electrical properties, the power conversion efficiency of craterlike bilayer TiO₂ ETL-based PSCs could be increased from 13.7 to 16.0% as compared to conventional dense TiO₂-based PSCs.

Detection of infectious spleen and kidney necrosis virus (ISKNV) and turbot reddish body iridovirus (TRBIV) from archival ornamental fish samples

Although infections caused by megalocytiviruses have been reported from a wide range of finfish species for several decades, molecular characterisation of the viruses involved has been undertaken only on more recent cases. Sequence analysis of the major capsid protein and adenosine triphosphatase genes is reported here from formalin-fixed, paraffin-embedded material from 2 archival ornamental fish cases from 1986 and 1988 in conjunction with data for a range of genes from fresh frozen tissues from 5 cases obtained from 1991 through to 2010. Turbot reddish body iridovirus (TRBIV) genotype megalocytiviruses, previously not documented in ornamental fish, were detected in samples from 1986, 1988 and 1991. In contrast, megalocytiviruses from 1996 onwards, including those characterised from 2002, 2006 and 2010 in this study, were almost indistinguishable from infectious spleen and kidney necrosis virus (ISKNV). Three of the species infected with TRBIV-like megalocytiviruses from 1986 to 1991, viz. dwarf gourami Trichogaster lalius (formerly Colisa lalia), freshwater angelfish Pterophyllum scalare and oscar Astronotus ocellatus, were infected with ISKNV genotype megalocytiviruses from 2002 to 2010. The detection of a TRBIV genotype isolate in ornamental fish from 1986 represents the index case, confirmed by molecular sequence data, for the genus Megalocytivirus.

Characterization of liver metastases: the efficacy of biphasic magnetic resonance imaging with ferucarbotran-enhancement

AIM

To retrospectively evaluate the efficacy of biphasic magnetic resonance imaging (MRI) of the liver with ferucarbotran-enhancement for the characterization of hepatic metastases.

MATERIALS AND METHODS

Thirty-six patients underwent MRI of the liver with separate acquisition of double-contrast enhancement consisting of gadolinium and ferucarbotran. A total of 106 focal hepatic lesions (51 metastases, 31 cysts, 23 haemangiomas, and one eosinophilic abscess) were included. Two sets of MRI were analysed: (1) ferucarbotran set: ferucarbotran-enhanced T1-weighted (T1W) dynamic imaging combined with ferucarbotran-enhanced T2*-weighted (T2*W) delayed imaging and (2) double set: gadolinium-enhanced T1W dynamic imaging combined with ferucarbotran-enhanced T2*W delayed imaging. The diagnostic accuracy of the two sets was evaluated using alternative free-response receiver operating characteristic curve analysis. Sensitivity and specificity were compared using the McNemar test. The enhancement pattern of focal hepatic lesions was analysed on gadolinium and ferucarbotran-enhanced T1W dynamic imaging.

RESULTS

There was no significant difference in the accuracy of characterizing hepatic metastases between the two sets. Sensitivity and specificity were not significantly different between the sets (p>0.05). Peripheral rim enhancement was exhibited in 57% of metastatic lesions on ferucarbotran-enhanced T1W dynamic imaging. The majority (96%) of hepatic haemangiomas demonstrated typical peripheral nodular enhancement with progression on ferucarbotran-enhanced T1W dynamic imaging and were easily differentiated from metastases.

CONCLUSION

Biphasic MRI of the liver with ferucarbotran-enhancement alone provided comparable diagnostic efficacy to double-contrast MRI for the characterization of hepatic metastases.

Simulation of 1-year-old Populus tremuloides response to ozone stress at Ithaca, USA, and Suwon, Republic of Korea

The growth of 1-year-old aspen was simulated using TREGRO, a computer simulation model of individual tree growth, to assess potential effects of ozone (O3). TREGRO was parameterized using information from a field experiment conducted at Ithaca, NY, USA; the model was then applied using environmental information from Suwon, Korea, where O3 exposures of aspen had not been conducted. In the parameterization at Ithaca, the simulated and measured total biomass differed by about 3% and the differences between measured and simulated biomass gain of leaf, shoot, and root were 15.4, 8.3, and 4.4%, respectively. Simulating growth at Suwon required adjustment in growth rates to match measured growth due to the different weather conditions at the two cities. The assimilated carbon was evenly distributed to each tissue (foliage, branch, stem, coarse, fine roots) in Suwon, whereas it was mainly allocated to vigorous stem growth in Ithaca. The vigorous growth under Suwon conditions resulted in less total non-structural carbon and perhaps trees more vulnerable to O3 stress. Although the ambient O3 in Suwon (1.2 ppm.h of sum of the hourly concentrations greater than 0.06 ppm [SUM06]) was lower than that in Ithaca (2.1 ppm.h of SUM06), a reduction of 8% of total assimilated carbon was found compared to simulation without O3. Severe effects on root growth at elevated O3 (1.7 times ambient) were predicted; however, the effects on leaf growth would not be as severe.