Ultra-broadband absorbance of nanometer-thin pyrolyzed-carbon film on silicon nitride membrane

Fifty percents absorption by thin film, with thickness is much smaller than the skin depth and optical thickness much smaller than the wavelength, is a well-known concept of classical electrodynamics. This is a valuable feature that has been numerously widely explored for metal films, while chemically inert nanomembranes are a real fabrication challenge. Here we report the 20 nm thin pyrolyzed carbon film (PyC) placed on 300 nm thick silicon nitride (Si3N4) membrane demonstrating an efficient broadband absorption in the terahertz and near infrared ranges. While the bare Si3N4membrane is completely transparent in the THz range, the 20 nm thick PyC layer increases the absorption of the PyC coated Si3N4membrane to 40%. The reflection and transmission spectra in the near infrared region reveal that the PyC film absorption persists to a level of at least 10% of the incident power. Such a broadband absorption of the PyC film opens new pathways toward broadband bolometric radiation detectors.

Nano- and micro-crystalline diamond film structuring with electron beam lithography mask

Direct current plasma enhanced chemical vapor deposition (CVD) was employed to create polycrystalline diamond films from CH4/H2gaseous mixture at 98 mbar pressure and various substrate temperatures between 720 °C and 960 °C. The Si chips with patterns of periodic masked and open seeded zones were used as substrates. The mask free seeded areas evolved into polycrystalline diamond films after CVD process. The diamond crystallites of the films featured single crystal ordering individually with distinct cubic (100) or octahedral (111) facets on the film surfaces. Notably, specific growth conditions were determined for obtaining diamond films composed of the crystallites of nanometre and micrometre scale. These conditions are differing from those observed for non-pattern-prepared Si substrates. The nano-crystalline diamonds emerged within the 4.5-5 A current range, with growth conditions involving 3% CH4/H2mixture at 98 mbar. The micro-crystalline diamonds (MCDs) predominantly characterized by well-developed rectangular (100) crystal faces on the film surface were successfully grown with current settings of 5.5-6 A, under 3% CH4/H2mixture at 98 mbar. Furthermore, MCDs characterized by entirely crystalline (111) diamond faces forming CVD film surface were attained within a growth parameter range of 4.5-5.8 A, employing 3% CH4/H2mixture for certain samples, or alternatively, utilizing 5 A with a 1.5% CH4/H2mixture for others. Upon thorough evaluation, it was established that SiO2, TiO2, and Cr masks are well-suited materials for the planar patterning of both nano- and micro-crystalline diamond films, and the bottom-up approach can pave the way for the production of diamond planar structures through CVD, facilitated by electron beam lithography (EBL).

Single-Crystal Diamond Needle Fabrication Using Hot-Filament Chemical Vapor Deposition

Single-crystal diamonds in the form of micrometer-scale pyramids were produced using a combination of hot-filament (HF) chemical vapor deposition (CVD) and thermal oxidation processes. The diamond pyramids were compared here with similar ones that were manufactured using plasma-enhanced (PE) CVD. The similarities revealed in the morphology, Raman, and photoluminescent characteristics of the needles obtained using the hot-filament and plasma-enhanced CVD are discussed in connection with the diamond film growth mechanism. This work demonstrated that the HF CVD method has convincing potential for the fabrication of single-crystal diamond needles in the form of regularly shaped pyramids on a large surface area, even on non-conducting substrates. The experimental results demonstrated the ability for the mass production of the single-crystal needle-like diamonds, which is important for their practical application.

Macro-, Micro- and Nano-Roughness of Carbon-Based Interface with the Living Cells: Towards a Versatile Bio-Sensing Platform

Integration of living cells with nonbiological surfaces (substrates) of sensors, scaffolds, and implants implies severe restrictions on the interface quality and properties, which broadly cover all elements of the interaction between the living and artificial systems (materials, surface modifications, drug-eluting coatings, etc.). Substrate materials must support cellular viability, preserve sterility, and at the same time allow real-time analysis and control of cellular activity. We have compared new substrates based on graphene and pyrolytic carbon (PyC) for the cultivation of living cells. These are PyC films of nanometer thickness deposited on SiO2 and black silicon and graphene nanowall films composed of graphene flakes oriented perpendicular to the Si substrate. The structure, morphology, and interface properties of these substrates are analyzed in terms of their biocompatibility. The PyC demonstrates interface biocompatibility, promising for controlling cell proliferation and directional intercellular contact formation while as-grown graphene walls possess high hydrophobicity and poor biocompatibility. By performing experiments with C6 glioma cells we discovered that PyC is a cell-friendly coating that can be used without poly-l-lysine or other biopolymers for controlling cell adhesion. Thus, the opportunity to easily control the physical/chemical properties and nanotopography makes the PyC films a perfect candidate for the development of biosensors and 3D bioscaffolds.