[Anti-IL-5 in severe asthma associated with eosinophilic granulomatosis with polyangiitis. Real-life study]

INTRODUCTION

Eosinophilic granulomatosis with polyangiitis (EGPA) is a form of necrotizing vasculitis affecting small vessels and typically characterized by severe glucocorticoid (GC)-dependent eosinophilic asthma. While mepolizumab, which is indicated at a dose of 100mg/4weeks in severe eosinophilic asthma, has been shown to be an effective treatment for EGPA-related asthma at a dose of 300mg/4weeks, it was only recently approved at this dose.

METHODS

This retrospective, single-center, observational study was conducted to investigate over a 5-year period (2014-2019) the effect of mepolizumab 100mg/4weeks at 12months in patients with EGPA and glucocorticoid-dependant severe asthma. Response to treatment was defined as reduction in daily dose of oral corticosteroids to at most 5mg/day or reduction in annual exacerbation by at least 50%.

RESULTS

Thirty patients were included, of whom twenty-three were treated (two were not fully evaluable). Among the 21 evaluable treated patients, 13 (62%) had responded at 12months. At baseline, non-responders had lower FEV1 levels and lower blood eosinophil levels than responders.

CONCLUSIONS

Mepolizumab at a "severe asthma" dose (100mg/4weeks) is effective in treatment of GC-dependent severe asthma in most patients with EGPA.

Role of Nuclear Morphometry in the Cytologic Evaluation of Benign and Malignant Thyroid Lesions

Thyroid lesions are very common problem in Bangladesh. To categorize the type of lesion, FNAC is a reliable, minimally invasive and cost-effective diagnostic modality. In routine cytology, precise categorization into benign and malignant is highly subjective. So, additional methods are needed to improve the accuracy of cytological diagnosis. Computerized semi-automatic nuclear morphometry is an objective and reproducible tool for quantitative evaluation of nuclear features which may help to differentiate between benign and malignant thyroid lesions in cytology. Objective of the study was to apply morphometry with regard to nuclear size parameters, shape parameters and nuclear chromasia with derivation of suitable cutoff values to differentiate benign and malignant lesions of thyroid gland. This cross-sectional study was done in total 55 cases at the Department of Pathology, Bangabandhu Sheikh Mujib Medical University, Bangladesh from March 2018 to February 2020. Morphometry was done on images containing diagnostic cells captured from cytological smears with open source ImageJ morphometric software. In this study, all the nuclear size parameters and one nuclear shape parameter was found significant in differentiating benign and malignant lesions. No significant difference was observed in analysis of chromasia parameter. The cut-off values derived between all benign and malignant lesions for mean value of nuclear area, maximum feret diameter, perimeter and aspect ratio were 40.20μm², 8.46μm, 6.68μm, 28.28μm and 1.35 respectively with sensitivity of 86%, 95%, 81%, 90% and specificity of 97%, 93%, 97% and 97% respectively. The Nuclear morphometry may be used as an adjunctive tool to routine thyroid cytology.

Correction to: A survey on COVID-19 impact in the healthcare domain: worldwide market implementation, applications, security and privacy issues, challenges and future prospects

[This corrects the article DOI: 10.1007/s40747-022-00767-w.].

Evaluation of prognostic risk models for postoperative pulmonary complications in adult patients undergoing major abdominal surgery: a systematic review and international external validation cohort study

BACKGROUND

Stratifying risk of postoperative pulmonary complications after major abdominal surgery allows clinicians to modify risk through targeted interventions and enhanced monitoring. In this study, we aimed to identify and validate prognostic models against a new consensus definition of postoperative pulmonary complications.

METHODS

We did a systematic review and international external validation cohort study. The systematic review was done in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. We searched MEDLINE and Embase on March 1, 2020, for articles published in English that reported on risk prediction models for postoperative pulmonary complications following abdominal surgery. External validation of existing models was done within a prospective international cohort study of adult patients (≥18 years) undergoing major abdominal surgery. Data were collected between Jan 1, 2019, and April 30, 2019, in the UK, Ireland, and Australia. Discriminative ability and prognostic accuracy summary statistics were compared between models for the 30-day postoperative pulmonary complication rate as defined by the Standardised Endpoints in Perioperative Medicine Core Outcome Measures in Perioperative and Anaesthetic Care (StEP-COMPAC). Model performance was compared using the area under the receiver operating characteristic curve (AUROCC).

FINDINGS

In total, we identified 2903 records from our literature search; of which, 2514 (86·6%) unique records were screened, 121 (4·8%) of 2514 full texts were assessed for eligibility, and 29 unique prognostic models were identified. Nine (31·0%) of 29 models had score development reported only, 19 (65·5%) had undergone internal validation, and only four (13·8%) had been externally validated. Data to validate six eligible models were collected in the international external validation cohort study. Data from 11 591 patients were available, with an overall postoperative pulmonary complication rate of 7·8% (n=903). None of the six models showed good discrimination (defined as AUROCC ≥0·70) for identifying postoperative pulmonary complications, with the Assess Respiratory Risk in Surgical Patients in Catalonia score showing the best discrimination (AUROCC 0·700 [95% CI 0·683-0·717]).

INTERPRETATION

In the pre-COVID-19 pandemic data, variability in the risk of pulmonary complications (StEP-COMPAC definition) following major abdominal surgery was poorly described by existing prognostication tools. To improve surgical safety during the COVID-19 pandemic recovery and beyond, novel risk stratification tools are required.

FUNDING

British Journal of Surgery Society.

A survey on COVID-19 impact in the healthcare domain: worldwide market implementation, applications, security and privacy issues, challenges and future prospects

Extensive research has been conducted on healthcare technology and service advancements during the last decade. The Internet of Medical Things (IoMT) has demonstrated the ability to connect various medical apparatus, sensors, and healthcare specialists to ensure the best medical treatment in a distant location. Patient safety has improved, healthcare prices have decreased dramatically, healthcare services have become more approachable, and the operational efficiency of the healthcare industry has increased. This research paper offers a recent review of current and future healthcare applications, security, market trends, and IoMT-based technology implementation. This research paper analyses the advancement of IoMT implementation in addressing various healthcare concerns from the perspectives of enabling technologies, healthcare applications, and services. The potential obstacles and issues of the IoMT system are also discussed. Finally, the survey includes a comprehensive overview of different disciplines of IoMT to empower future researchers who are eager to work on and make advances in the field to obtain a better understanding of the domain.

Applications of Wireless Sensor Networks and Internet of Things Frameworks in the Industry Revolution 4.0: A Systematic Literature Review

The 21st century has seen rapid changes in technology, industry, and social patterns. Most industries have moved towards automation, and human intervention has decreased, which has led to a revolution in industries, named the fourth industrial revolution (Industry 4.0). Industry 4.0 or the fourth industrial revolution (IR 4.0) relies heavily on the Internet of Things (IoT) and wireless sensor networks (WSN). IoT and WSN are used in various control systems, including environmental monitoring, home automation, and chemical/biological attack detection. IoT devices and applications are used to process extracted data from WSN devices and transmit them to remote locations. This systematic literature review offers a wide range of information on Industry 4.0, finds research gaps, and recommends future directions. Seven research questions are addressed in this article: (i) What are the contributions of WSN in IR 4.0? (ii) What are the contributions of IoT in IR 4.0? (iii) What are the types of WSN coverage areas for IR 4.0? (iv) What are the major types of network intruders in WSN and IoT systems? (v) What are the prominent network security attacks in WSN and IoT? (vi) What are the significant issues in IoT and WSN frameworks? and (vii) What are the limitations and research gaps in the existing work? This study mainly focuses on research solutions and new techniques to automate Industry 4.0. In this research, we analyzed over 130 articles from 2014 until 2021. This paper covers several aspects of Industry 4.0, from the designing phase to security needs, from the deployment stage to the classification of the network, the difficulties, challenges, and future directions.

A neutrosophic clinical decision-making system for cardiovascular diseases risk analysis

Cardiovascular diseases are the leading cause of death worldwide. Early diagnosis of heart disease can reduce this large number of deaths so that treatment can be carried out. Many decision-making systems have been developed, but they are too complex for medical professionals. To target these objectives, we develop an explainable neutrosophic clinical decision-making system for the timely diagnose of cardiovascular disease risk. We make our system transparent and easy to understand with the help of explainable artificial intelligence techniques so that medical professionals can easily adopt this system. Our system is taking thirty-five symptoms as input parameters, which are, gender, age, genetic disposition, smoking, blood pressure, cholesterol, diabetes, body mass index, depression, unhealthy diet, metabolic disorder, physical inactivity, pre-eclampsia, rheumatoid arthritis, coffee consumption, pregnancy, rubella, drugs, tobacco, alcohol, heart defect, previous surgery/injury, thyroid, sleep apnea, atrial fibrillation, heart history, infection, homocysteine level, pericardial cysts, marfan syndrome, syphilis, inflammation, clots, cancer, and electrolyte imbalance and finds out the risk of coronary artery disease, cardiomyopathy, congenital heart disease, heart attack, heart arrhythmia, peripheral artery disease, aortic disease, pericardial disease, deep vein thrombosis, heart valve disease, and heart failure. There are five main modules of the system, which are neutrosophication, knowledge base, inference engine, de-neutrosophication, and explainability. To demonstrate the complete working of our system, we design an algorithm and calculates its time complexity. We also present a new de-neutrosophication formula, and give comparison of our the results with existing methods.

Medical decision support systems based on Fuzzy Cognitive Maps

This paper determines the risk for cardiovascular diseases (CVDs), and nutrition level in infants aged 0–6 months using Fuzzy Cognitive Maps (FCMs). The aim of this study is to facilitates the medical experts to early detects these diseases with accuracy, so that overall death ratio can be reduced. Firstly, we have introduced the concepts of FCMs and briefly refer to the applications of these methods in medical. After that, two intelligent decision support systems for cardiovascular and malnutrition are developed using FCMs. The proposed cardiovascular risk assessment system takes six inputs: chest pain, cholesterol, heart rate, blood pressure, blood sugar, and old peak and determines CVDs risk. The second decision support system of malnutrition diagnosis takes twelve inputs: breastfeeding, daily income, maternal education, colostrum intake, energy intake, protein intake, vitamin A intake, iron intake, family size, height, weight, head circumference, and skin fold thickness and diagnoses the nutrition level in infants. We have explained the working of both decision support systems using case studies.

Drain or No Drain Following Pancreaticoduodenectomy: The Unsolved Dilemma

BACKGROUND AND AIMS

There is no consensus regarding the routine placement of intra-abdominal drains after pancreaticoduodenectomy. We aim to determine the effects of intraperitoneal drain placement during pancreaticoduodenectomy on 30-day postoperative morbidity and mortality.

METHODS

Patients who underwent pancreaticoduodenectomy for pancreatic tumors were identified from the 2014-2015 American College of Surgeons-National Surgical Quality Improvement Program Database. Univariate and multivariate analyses adjusting for known prognostic variables were performed. A subgroup analysis was performed based on the risk for development of postoperative pancreatic leak determined by the pancreatic duct caliber, parenchymal texture, and body mass index.

RESULTS

A total of 6858 patients with pancreatic tumors who underwent pancreaticoduodenectomy were identified in the 2014-2015 American College of Surgeons-National Surgical Quality Improvement Program Database dataset. In all, 87.4% of patients had intraperitoneal drains placed. A 30-day mortality rate was higher in the no-drain group (2.9% vs. 1.7%, P = 0.003). Patients in the drain group had a higher incidence of overall morbidity (49.5% vs. 41.2%, P = 0.0008), delayed gastric emptying (18.1% vs. 13.7%, P = 0.004), pancreatic fistulae (19.4% vs. 9.9%, P ⩽ 0.0001), and prolonged length of hospital stay over 10 days (43.7% vs. 34.9%, P < 0.0001). Subgroup analysis based on risk categories revealed a higher 30-day mortality rate in the no-drain group among patients with high-risk features (3.1% vs. 1.6%, P = 0.02). Delayed gastric emptying and pancreatic fistula development remained significantly higher in the drain group only in the high-risk category. Prolonged length of hospital stay and composite morbidity remained higher in the drain group regardless of the risk category.

CONCLUSION

To our knowledge, this is the largest study to date that aims at clarifying the pros and cons of the intraperitoneal drain placement during pancreaticoduodenectomy for pancreatic tumors. We showed a higher 30-day mortality rate if drain insertion was omitted during pancreaticoduodenectomy in patients with softer pancreatic textures, smaller pancreatic duct caliber, and body mass index over 25. Postoperative 30-day morbidity rate was higher if a drain was inserted regardless of the risk category. Further randomized controlled trials with prospective evaluation of stratification factors for fistula risk are needed to establish a clear recommendation.

Diagnostic methods and risk analysis based on fuzzy soft information

In our daily life problem we face uncertainties in making right decisions. In this study, we propose two different decision-making problems in medical field. The first problem is fever diagnosing and second problem is mouth cancer risk analysis. In the first problem, we use fuzzy soft similarity measures and fuzzy soft matrix operations to diagnose the type of fever. We consider a hypothetical case study and manipulate similarity measures on it. Our work diagnoses different patients having similar symptoms. We also develop a small application using JAVA. In the second problem, we perform risk analysis of mouth cancer. The proposed fuzzy soft expert system takes two biochemical parameters as inputs that is, serum total malondialdehyde (MDA), and serum proton donors capacity (donors_protons) and determines the risk of mouth cancer. Our study facilitates doctors by diagnosing mouth cancer at its earlier stages. There are four main components of our fuzzy soft expert system. The first component is named as fuzzification which converts crisp input into linguistic variables and formulates fuzzy sets. The second component transforms fuzzy sets into their respective fuzzy soft sets. The third component determines indispensable parameters and performs parameter reduction. The fourth component performs risk analysis by using algorithm. We use exemplary dataset and run all the components of fuzzy soft expert system to compute cancer risk.

Retinal Structure in Pre-Clinical Age-Related Macular Degeneration

PURPOSE

To determine, if there are identifiable retinal structural changes associated with genetic risk for age-related macular degeneration (AMD).

MATERIALS AND METHODS

Seventy-three subjects (range 51.5 to 68.9 years) participated in this prospective study. Subjects were recruited based on the presence of a family history of AMD in one or both parents. All participants underwent a complete ophthalmic exam and imagery for staging of disease severity and genetic testing to assess genetic risk for AMD development. Optical coherence tomography (OCT) imaging was performed on all participants. Semi-automated retinal layer segmentation was performed to assess retinal structural changes.

RESULTS

Of 73 subjects, 47 subjects had normal appearing retina with no evidence of drusen or other changes consistent with AMD, 16 subjects were classified as early AMD, and 13 were designated as intermediate AMD. Retinal volume measures of total retina, outer retina, outer nuclear layer and the retinal pigment epithelium, were not related to AMD classification, genetic risk scores, or age. The thickness of the outer retina showed statistically significant thickening in the foveal region in only the intermediate AMD group and a statistically significant thickening of the RPE in early and intermediate AMD groups in the central retina.

CONCLUSION

No consistent changes were observed in retinal structure at multiple locations that are associated with pre-clinical AMD, based on AMD genetic risk or with aging within the age range of our cohort.

The Z-cad dual fluorescent sensor detects dynamic changes between the epithelial and mesenchymal cellular states

BACKGROUND

The epithelial to mesenchymal transition (EMT) has been implicated in metastasis and therapy resistance of carcinomas and can endow cancer cells with cancer stem cell (CSC) properties. The ability to detect cancer cells that are undergoing or have completed EMT has typically relied on the expression of cell surface antigens that correlate with an EMT/CSC phenotype. Alternatively these cells may be permanently marked through Cre-mediated recombination or through immunostaining of fixed cells. The EMT process is dynamic, and these existing methods cannot reveal such changes within live cells. The development of fluorescent sensors that mirror the dynamic EMT state by following the expression of bona fide EMT regulators in live cells would provide a valuable new tool for characterizing EMT. In addition, these sensors will allow direct observation of cellular plasticity with respect to the epithelial/mesenchymal state to enable more effective studies of EMT in cancer and development.

RESULTS

We generated a lentiviral-based, dual fluorescent reporter system, designated as the Z-cad dual sensor, comprising destabilized green fluorescent protein containing the ZEB1 3' UTR and red fluorescent protein driven by the E-cadherin (CDH1) promoter. Using this sensor, we robustly detected EMT and mesenchymal to epithelial transition (MET) in breast cancer cells by flow cytometry and fluorescence microscopy. Importantly, we observed dynamic changes in cellular populations undergoing MET. Additionally, we used the Z-cad sensor to identify and isolate minor subpopulations of cells displaying mesenchymal properties within a population comprising predominately epithelial-like cells. The Z-cad dual sensor identified cells with CSC-like properties more effectively than either the ZEB1 3' UTR or E-cadherin sensor alone.

CONCLUSIONS

The Z-cad dual sensor effectively reports the activities of two factors critical in determining the epithelial/mesenchymal state of carcinoma cells. The ability of this stably integrating dual sensor system to detect dynamic fluctuations between these two states through live cell imaging offers a significant improvement over existing methods and helps facilitate the study of EMT/MET plasticity in response to different stimuli and in cancer pathogenesis. Finally, the versatile Z-cad sensor can be adapted to a variety of in vitro or in vivo systems to elucidate whether EMT/MET contributes to normal and disease phenotypes.

Mesoblastic Nephroma in a 22 Years Old Woman

Mesoblastic nephroma is an uncommon renal tumor of infancy and rarely occurs in adults. We report a case of mesoblastic nephroma in adult. A 22-year-old woman, who presented with left flank pain, was found to have a left renal mass by abdominal ultrasonography. Computed tomography revealed a heterogeneous tumor. Left radical nephrectomy was performed. The tumor was a creamy white solid mass. Microscopically, the tumor was composed of spindle cell proliferation. Atypia and mitoses were not identified. Among the tumor cells, there were tubular arranged epithelial elements. The patient was free of recurrence 18 months postoperatively. Mesoblastic nephroma is classified as a benign tumor but recurrence and malignant transformation of this tumor have been reported, so regular postoperative follow up is required.

Measurement of differential cross sections for the production of a pair of isolated photons in pp collisions at [Formula: see text]

A measurement of differential cross sections for the production of a pair of isolated photons in proton-proton collisions at [Formula: see text] is presented. The data sample corresponds to an integrated luminosity of 5.0[Formula: see text] collected with the CMS detector. A data-driven isolation template method is used to extract the prompt diphoton yield. The measured cross section for two isolated photons, with transverse energy above 40 and 25[Formula: see text] respectively, in the pseudorapidity range [Formula: see text], [Formula: see text] and with an angular separation [Formula: see text], is [Formula: see text][Formula: see text]. Differential cross sections are measured as a function of the diphoton invariant mass, the diphoton transverse momentum, the azimuthal angle difference between the two photons, and the cosine of the polar angle in the Collins-Soper reference frame of the diphoton system. The results are compared to theoretical predictions at leading, next-to-leading, and next-to-next-to-leading order in quantum chromodynamics.

Evidence of b-jet quenching in PbPb collisions at √(s(NN))=2.76 TeV

The production of jets associated to bottom quarks is measured for the first time in PbPb collisions at a center-of-mass energy of 2.76 TeV per nucleon pair. Jet spectra are reported in the transverse momentum (p(T)) range of 80-250  GeV/c, and within pseudorapidity |η|<2. The nuclear modification factor (R(AA)) calculated from these spectra shows a strong suppression in the b-jet yield in PbPb collisions relative to the yield observed in pp collisions at the same energy. The suppression persists to the largest values of p(T) studied, and is centrality dependent. The R(AA) is about 0.4 in the most central events, similar to previous observations for inclusive jets. This implies that jet quenching does not have a strong dependence on parton mass and flavor in the jet p(T) range studied.

Measurement of jet multiplicity distributions in [Formula: see text] production in pp collisions at [Formula: see text]

The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7[Formula: see text] at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton+jets decay channels using data corresponding to an integrated luminosity of 5.0[Formula: see text]. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the [Formula: see text] production is determined as a function of the additional jet multiplicity in the lepton+jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.

Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes

A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a [Formula: see text] quark pair. The searches use the 8 [Formula: see text] pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 [Formula: see text]. Certain channels include data from 7 [Formula: see text] collisions corresponding to an integrated luminosity of 4.9 [Formula: see text]. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at [Formula: see text] [Formula: see text] is found to be 0.58 (0.44) at 95 % confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.

Measurement of WZ and ZZ production in pp collisions at [Formula: see text] in final states with b-tagged jets

Measurements are reported of the WZ and ZZ production cross sections in proton-proton collisions at [Formula: see text][Formula: see text] in final states where one Z boson decays to b-tagged jets. The other gauge boson, either W or Z, is detected through its leptonic decay (either [Formula: see text], [Formula: see text] or [Formula: see text], [Formula: see text], or [Formula: see text]). The results are based on data corresponding to an integrated luminosity of 18.9 fb[Formula: see text] collected with the CMS detector at the Large Hadron Collider. The measured cross sections, [Formula: see text] and [Formula: see text], are consistent with next-to-leading order quantum chromodynamics calculations.

Observation of the associated production of a single top quark and a W boson in pp collisions at sqrt[s] = 8 TeV

The first observation of the associated production of a single top quark and a W boson is presented. The analysis is based on a data set corresponding to an integrated luminosity of 12.2 fb(-1) of proton-proton collisions at sqrt[s] = 8 TeV recorded by the CMS experiment at the LHC. Events with two leptons and a jet originating from a b quark are selected. A multivariate analysis based on kinematic and topological properties is used to separate the signal from the dominant tt background. An excess consistent with the signal hypothesis is observed, with a significance which corresponds to 6.1 standard deviations above a background-only hypothesis. The measured production cross section is 23.4 ± 5.4 pb, in agreement with the standard model prediction.

Probing color coherence effects in pp collisions at [Formula: see text]

A study of color coherence effects in pp collisions at a center-of-mass energy of 7[Formula: see text] is presented. The data used in the analysis were collected in 2010 with the CMS detector at the LHC and correspond to an integrated luminosity of 36 pb[Formula: see text]. Events are selected that contain at least three jets and where the two jets with the largest transverse momentum exhibit a back-to-back topology. The measured angular correlation between the second- and third-leading jet is shown to be sensitive to color coherence effects, and is compared to the predictions of Monte Carlo models with various implementations of color coherence. None of the models describe the data satisfactorily.

Study of the production of charged pions, kaons, and protons in pPb collisions at [Formula: see text]5.02[Formula: see text]

Spectra of identified charged hadrons are measured in pPb collisions with the CMS detector at the LHC at [Formula: see text]. Charged pions, kaons, and protons in the transverse-momentum range [Formula: see text]-1.7[Formula: see text] and laboratory rapidity [Formula: see text] are identified via their energy loss in the silicon tracker. The average [Formula: see text] increases with particle mass and the charged multiplicity of the event. The increase of the average [Formula: see text] with charged multiplicity is greater for heavier hadrons. Comparisons to Monte Carlo event generators reveal that Epos Lhc, which incorporates additional hydrodynamic evolution of the created system, is able to reproduce most of the data features, unlike Hijing and Ampt. The [Formula: see text] spectra and integrated yields are also compared to those measured in pp and PbPb collisions at various energies. The average transverse momentum and particle ratio measurements indicate that particle production at LHC energies is strongly correlated with event particle multiplicity.

Measurement of inclusive W and Z boson production cross sections in pp collisions at sqrt[s] = 8 TeV

A measurement of total and fiducial inclusive W and Z boson production cross sections in pp collisions at sqrt[s] = 8 TeV is presented. Electron and muon final states are analyzed in a data sample collected with the CMS detector corresponding to an integrated luminosity of 18.2 ± 0.5 pb(-1). The measured total inclusive cross sections times branching fractions are σ(pp → WX)×B(W → ℓν) = 12.21 ± 0.03(stat) ± 0.24(syst) ± 0.32(lum) nb and σ(pp → ZX) × B(Z → ℓ+ℓ-) = 1.15 ± 0.01(stat) ± 0.02(syst) ± 0.03(lum) nb for the dilepton mass in the range of 60-120 GeV. The measured values agree with next-to-next-to-leading-order QCD cross section calculations. Ratios of cross sections are reported with a precision of 2%. This is the first measurement of inclusive W and Z boson production in proton-proton collisions at sqrt[s] = 8 TeV.

Measurements of tt spin correlations and top-quark polarization using dilepton final states in pp collisions at sqrt[s]=7 TeV

Spin correlations and polarization in the top quark-antiquark system are measured using dilepton final states produced in pp collisions at the LHC at sqrt[s]=7  TeV. The data correspond to an integrated luminosity of 5.0  fb(-1) collected with the CMS detector. The measurements are performed using events with two oppositely charged leptons (electrons or muons), a significant imbalance in transverse momentum, and two or more jets, where at least one of the jets is identified as originating from a b quark. The spin correlations and polarization are measured through asymmetries in angular distributions of the two selected leptons, unfolded to the parton level. All measurements are found to be in agreement with predictions of the standard model.

Search for top-quark partners with charge 5/3 in the same-sign dilepton final state

A search for the production of heavy partners of the top quark with charge 5/3 is performed in events with a pair of same-sign leptons. The data sample corresponds to an integrated luminosity of 19.5 fb(-1) and was collected at sqrt[s] = 8 TeV by the CMS experiment. No significant excess is observed in the data above the expected background, and the existence of top-quark partners with masses below 800 GeV is excluded at a 95% confidence level, assuming they decay exclusively to tW. This is the first limit on these particles from the LHC, and it is significantly more restrictive than previous limits.

Search for flavor-changing neutral currents in top-quark decays t → Zq in pp collisions at sqrt[s] = 8 TeV

A search for flavor-changing neutral currents in top-quark decays t → Zq is performed in events produced from the decay chain tt → Zq+Wb, where both vector bosons decay leptonically, producing a final state with three leptons (electrons or muons). A data set collected with the CMS detector at the LHC is used, corresponding to an integrated luminosity of 19.7 fb(-1) of proton-proton collisions at a center-of-mass energy of 8 TeV. No excess is seen in the observed number of events relative to the standard model prediction; thus, no evidence for flavor-changing neutral currents in top-quark decays is found. A combination with a previous search at 7 TeV excludes a t → Zq branching fraction greater than 0.05% at the 95% confidence level.

Search for top squark and Higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top quark (the top squark) and the Higgs boson (Higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7  fb-1 of proton-proton collision data at s=8  TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the top squark mass below 360 to 410 GeV, depending on the Higgsino mass.

Measurement of the top-quark mass in all-jets [Formula: see text] events in pp collisions at [Formula: see text] TeV

The mass of the top quark is measured using a sample of [Formula: see text] candidate events with at least six jets in the final state. The sample is selected from data collected with the CMS detector in pp collisions at [Formula: see text] TeV in 2011 and corresponds to an integrated luminosity of 3.54 [Formula: see text]. The mass is reconstructed for each event employing a kinematic fit of the jets to a [Formula: see text] hypothesis. The top-quark mass is measured to be [Formula: see text] GeV. A combination with previously published measurements in other decay modes by CMS yields a mass of [Formula: see text] GeV.

Risk factors of domestic violence in Iran

OBJECTIVES

In this study, we have evaluated the lifetime and past-year prevalence of exposure to physical violence among married women in the city of Tehran and urban and rural areas of Hashtgerd.

METHODS

The target population were noninstitutionalized female citizens, aged 15 years or older, who have at least one history of marriage and who resided in the capital city of Tehran or Hashtgerd County from the summer of 2008 to fall of 2010. We used a multistage sampling method. Tehran's District Six, a central district in Tehran, was selected as a representative cluster of all municipal districts in Tehran. A total of fifty blocks were randomly selected from this district, from which 1,000 married women aged 15 years or older were interviewed using a cross-sectional design. Data was gathered face-to-face using a structured questionnaire. The lifetime prevalence, past-year prevalence, and related factors of domestic violence were measured. SPSS version 11.5 was used for the analyses.

RESULTS

Figures for lifetime prevalence and past-year prevalence were measured to be 38.7% and 6.6%, respectively. The independent effects of marital status and location and type of residency for women, along with education and smoking habits of their spouses, were statistically significant in multivariate logistic regression analysis.

CONCLUSION

Domestic violence is a public health concern in Iran. Based on our findings, we propose that empowering women through education, and improving their ability to find employment and income, along with increasing public awareness of human rights issues through education could lower the prevalence of domestic violence.

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at [Formula: see text]

Characteristics of multi-particle production in proton-proton collisions at [Formula: see text] are studied as a function of the charged-particle multiplicity, Nch. The produced particles are separated into two classes: those belonging to jets and those belonging to the underlying event. Charged particles are measured with pseudorapidity |η|<2.4 and transverse momentum pT>0.25 GeV/c. Jets are reconstructed from charged-particles only and required to have pT>5 GeV/c. The distributions of jet pT, average pT of charged particles belonging to the underlying event or to jets, jet rates, and jet shapes are presented as functions of Nch and compared to the predictions of the pythia and herwig event generators. Predictions without multi-parton interactions fail completely to describe the Nch-dependence observed in the data. For increasing Nch, pythia systematically predicts higher jet rates and harder pT spectra than seen in the data, whereas herwig shows the opposite trends. At the highest multiplicity, the data-model agreement is worse for most observables, indicating the need for further tuning and/or new model ingredients.

Search for top squarks in R-parity-violating supersymmetry using three or more leptons and b-tagged jets

A search for anomalous production of events with three or more isolated leptons and bottom-quark jets produced in pp collisions at √s=8 TeV is presented. The analysis is based on a data sample corresponding to an integrated luminosity of 19.5 fb(-1) collected by the CMS experiment at the LHC in 2012. No excess above the standard model expectations is observed. The results are interpreted in the context of supersymmetric models with signatures that have low missing transverse energy arising from light top-squark pair production with R-parity-violating decays of the lightest supersymmetric particle. In two models with different R-parity-violating couplings, top squarks are excluded below masses of 1020 GeV and 820 GeV when the lightest supersymmetric particle has a mass of 200 GeV.

Searches for new physics using the tt¯ invariant mass distribution in pp collisions at √s=8 TeV

Searches for anomalous top quark-antiquark production are presented, based on pp collisions at √s=8 TeV. The data, corresponding to an integrated luminosity of 19.7 fb(-1), were collected with the CMS detector at the LHC. The observed tt¯ invariant mass spectrum is found to be compatible with the standard model prediction. Limits on the production cross section times branching fraction probe, for the first time, a region of parameter space for certain models of new physics not yet constrained by precision measurements.

Search for supersymmetry in hadronic final states with missing transverse energy using the variables αT and b-quark multiplicity in pp collisions at [Formula: see text]

An inclusive search for supersymmetric processes that produce final states with jets and missing transverse energy is performed in pp collisions at a centre-of-mass energy of 8 TeV. The data sample corresponds to an integrated luminosity of 11.7 fb-1 collected by the CMS experiment at the LHC. In this search, a dimensionless kinematic variable, αT, is used to discriminate between events with genuine and misreconstructed missing transverse energy. The search is based on an examination of the number of reconstructed jets per event, the scalar sum of transverse energies of these jets, and the number of these jets identified as originating from bottom quarks. No significant excess of events over the standard model expectation is found. Exclusion limits are set in the parameter space of simplified models, with a special emphasis on both compressed-spectrum scenarios and direct or gluino-induced production of third-generation squarks. For the case of gluino-mediated squark production, gluino masses up to 950-1125 GeV are excluded depending on the assumed model. For the direct pair-production of squarks, masses up to 450 GeV are excluded for a single light first- or second-generation squark, increasing to 600 GeV for bottom squarks.

Measurement of the Bs(0)→μ+ μ- branching fraction and search for B(0)→μ+ μ- with the CMS experiment

Results are presented from a search for the rare decays Bs(0)→μ+ μ- and B(0)→μ+ μ- in pp collisions at sqrt[s]=7 and 8 TeV, with data samples corresponding to integrated luminosities of 5 and 20  fb(-1), respectively, collected by the CMS experiment at the LHC. An unbinned maximum-likelihood fit to the dimuon invariant mass distribution gives a branching fraction B(Bs(0)→μ+ μ-)=(3.0(-0.9)(+1.0))×10(-9), where the uncertainty includes both statistical and systematic contributions. An excess of Bs(0)→μ+ μ- events with respect to background is observed with a significance of 4.3 standard deviations. For the decay B(0)→μ+ μ- an upper limit of B(B(0)→μ+ μ-)<1.1×10(-9) at the 95% confidence level is determined. Both results are in agreement with the expectations from the standard model.

Inclusive search for supersymmetry using razor variables in pp collisions at √s=7 TeV

An inclusive search is presented for new heavy particle pairs produced in √s=7 TeV proton-proton collisions at the LHC using 4.7±0.1 fb(-1) of integrated luminosity. The selected events are analyzed in the 2D razor space of M(R), an event-by-event indicator of the heavy particle mass scale, and R, a dimensionless variable related to the missing transverse energy. The third-generation sector is probed using the event heavy-flavor content. The search is sensitive to generic supersymmetry models with minimal assumptions about the superpartner decay chains. No excess is observed in the number of events beyond that predicted by the standard model. Exclusion limits are derived in the CMSSM framework as well as for simplified models. Within the CMSSM parameter space considered, gluino masses up to 800 GeV and squark masses up to 1.35 TeV are excluded at 95% confidence level depending on the model parameters. The direct production of pairs of top or bottom squarks is excluded for masses as high as 400 GeV.

Search for physics beyond the standard model in events with τ leptons, jets, and large transverse momentum imbalance in pp collisions at [Formula: see text]

A search for physics beyond the standard model is performed with events having one or more hadronically decaying τ leptons, highly energetic jets, and large transverse momentum imbalance. The data sample corresponds to an integrated luminosity of 4.98 fb-1 of proton-proton collisions at [Formula: see text] collected with the CMS detector at the LHC in 2011. The number of observed events is consistent with predictions for standard model processes. Lower limits on the mass of the gluino in supersymmetric models are determined.

Measurement of masses in the [Formula: see text] system by kinematic endpoints in pp collisions at [Formula: see text]

A simultaneous measurement of the top-quark, W-boson, and neutrino masses is reported for [Formula: see text] events selected in the dilepton final state from a data sample corresponding to an integrated luminosity of 5.0 fb-1 collected by the CMS experiment in pp collisions at [Formula: see text]. The analysis is based on endpoint determinations in kinematic distributions. When the neutrino and W-boson masses are constrained to their world-average values, a top-quark mass value of [Formula: see text] is obtained. When such constraints are not used, the three particle masses are obtained in a simultaneous fit. In this unconstrained mode the study serves as a test of mass determination methods that may be used in beyond standard model physics scenarios where several masses in a decay chain may be unknown and undetected particles lead to underconstrained kinematics.