Exploring the value of three-dimensional printing and virtualization in paediatric healthcare: A multi-case quality improvement study

Background

Three-dimensional printing is being utilized in clinical medicine to support activities including surgical planning, education, and medical device fabrication. To better understand the impacts of this technology, a survey was implemented with radiologists, specialist physicians, and surgeons at a tertiary care hospital in Canada, examining multidimensional value and considerations for uptake.

Objectives

To examine how three-dimensional printing can be integrated into the paediatric context and highlight areas of impact and value to the healthcare system using Kirkpatrick's Model. Secondarily, to explore the perspective of clinicians utilizing three-dimensional models and how they make decisions about whether or not to use the technology in patient care.

Methods

A post-case survey. Descriptive statistics are provided for Likert-style questions, and a thematic analysis was conducted to identify common patterns in open-ended responses.

Results

In total, 37 respondents were surveyed across 19 clinical cases, providing their perspectives on model reaction, learning, behaviour, and results. We found surgeons and specialists to consider the models more beneficial than radiologists. Results further showed that the models were more helpful when used to assess the likelihood of success or failure of clinical management strategies, and for intraoperative orientation. We demonstrate that three-dimensional printed models could improve perioperative metrics, including a reduction in operating room time, but with a reciprocal effect on pre-procedural planning time. Clinicians who shared the models with patients and families thought it increased understanding of the disease and surgical procedure, and had no effect on their consultation time.

Conclusions

Three-dimensional printing and virtualization were used in preoperative planning and for communication among the clinical care team, trainees, patients, and families. Three-dimensional models provide multidimensional value to clinical teams, patients, and the health system. Further investigation is warranted to assess value in other clinical areas, across disciplines, and from a health economics and outcomes perspective.

Replicating Anatomical Teaching Specimens Using 3D Modeling Embedded Within a Multimodal e-Learning Course: Pre-Post Study Exploring the Impact on Medical Education During COVID-19

BACKGROUND

The COVID-19 pandemic has had significant effects on anatomy education. During the pandemic, students have had no access to cadavers, which has been the principal method of learning anatomy. We created and tested a customized congenital heart disease e-learning course for medical students that contained interactive 3D models of anonymized pediatric congenital heart defects.

OBJECTIVE

The aim of this study is to assess whether a multimodal e-learning course contributed to learning outcomes in a cohort of first-year undergraduate medical students studying congenital heart diseases. The secondary aim is to assess student attitudes and experiences associated with multimodal e-learning.

METHODS

The pre-post study design involved 290 first-year undergraduate medical students. Recruitment was conducted by course instructors. Data were collected before and after using the course. The primary outcome was knowledge acquisition (test scores). The secondary outcomes included attitudes and experiences, time to complete the modules, and browser metadata.

RESULTS

A total of 141 students were included in the final analysis. Students' knowledge significantly improved by an average of 44.6% (63/141) when using the course (SD 1.7%; Z=-10.287; P<.001). Most students (108/122, 88.3%) were highly motivated to learn with the course, and most (114/122, 93.5%) reported positive experiences with the course. There was a strong correlation between attitudes and experiences, which was statistically significant (rs=0.687; P<.001; n=122). No relationships were found between the change in test scores and attitudes (P=.70) or experiences (P=.47). Students most frequently completed the e-learning course with Chrome (109/141, 77.3%) and on Apple macOS (86/141, 61%) or Windows 10 (52/141, 36.9%). Most students (117/141, 83%) had devices with high-definition screens. Most students (83/141, 58.9%) completed the course in <3 hours.

CONCLUSIONS

Multimodal e-learning could be a viable solution in improving learning outcomes and experiences for undergraduate medical students who do not have access to cadavers. Future research should focus on validating long-term learning outcomes.

Comparing a Virtual Reality-Based Simulation App (VR-MRI) With a Standard Preparatory Manual and Child Life Program for Improving Success and Reducing Anxiety During Pediatric Medical Imaging: Randomized Clinical Trial

Background

The experience of undergoing magnetic resonance imaging (MRI) can be anxiety provoking, particularly for pediatric patients and their families. Alternative methods to improve success and experiences without the use of sedation are needed.

Objective

This study aims to compare the effectiveness of a virtual reality (VR)—based simulation app (VR-MRI) with a standard preparatory manual (SPM) and a hospital-based Child Life Program (CLP) on success and anxiety during a simulated pediatric MRI scan. Our secondary aim is to compare caregivers’ reported anxiety, procedural data, caregiver usability, child satisfaction, and fun.

Methods

This unblinded, randomized, triple-arm clinical trial involved 92 children aged 4-13 years and their caregivers. Recruitment was conducted through posters, public libraries, community centers, and social media. At a 2-hour session, participants were instructed to prepare for a simulated MRI head scan using one of three randomly assigned preparation materials: the VR-MRI app, SPM, or the CLP. Data were collected before preparation, during a simulated MRI head scan, and after the simulated scan. The primary outcomes were the success of the simulated MRI scan (MoTrak head motion tracking system), and child-reported anxiety (Venham picture test). We secondarily measured caregivers’ reported anxiety (short State-Trait Anxiety Inventory), procedural data (minutes), usability (Usefulness, Satisfaction, and Ease of Use Questionnaire), and child-reported satisfaction and fun (visual analog scales).

Results

A total of 84 participants were included in the final analysis (VR-MRI: 30/84, 36%; SPM: 24/84, 29%; and CLP: 30/84, 36%). There were no clinically significant differences between the groups in terms of success during the MRI simulation (P=.27) or the children’s reported anxiety at any timepoint (timepoint 1, P=.99; timepoint 2, P=.008; timepoint 3, P=.10). Caregivers reported being significantly more anxious after preparing with the manual than caregivers in the other 2 groups (P<.001). Child and caregiver anxiety had a significant relationship, increasing together with moderate effect (r₈₄=0.421; P<.001). Participants using VR-MRI took the most time to prepare (P<.001) and participants using the manual took the least time (P<.001). No statistically significant relationships were found between time preparing and time completing the simulated assessment (P=.13). There were no differences found in ease of use (P=.99), ease of learning (P=.48), and usefulness (P=.11) between the groups; however, caregivers reported being significantly more satisfied with the VR-MRI app and CLP than SPM (P<.001). Children reported the most satisfaction with the CLP (P<.001). There were no differences in how much fun the preparation materials were perceived to be (P=.37).

Conclusions

Digital preparation experiences using VR-based media could be a viable solution to improve the success of nonsedated MRI scans, with outcomes comparable with hospital-based in-person preparatory programs. Future research should focus on validating the results in a real MRI setting.

Trial Registration

Clinicaltrials.gov NCT03931382; https://clinicaltrials.gov/ct2/show/NCT03931382

Computer-assisted subcapital correction osteotomy in slipped capital femoral epiphysis using individualized drill templates

Background

Subcapital osteotomy by means of surgical hip dislocation is a treatment approach offered for moderate-to-severe cases of Slipped Capital Femoral Epiphysis (SCFE). This procedure is demanding, highly dependent on the surgeon’s experience, and requires considerable radiation exposure for monitoring and securing the spatial alignment of the femoral head. We propose the use of individualized drill guides as an accurate method for placing K-wires during subcapital correction osteotomies in SCFE patients.

Methods

Five CT scans of the hip joint from otherwise healthy patients with moderate-to-severe SCFE were selected (ages 11–14). Three dimensional models of each patient’s femur were reconstructed by manual segmentation and physically replicated using additive manufacturing techniques. Five orthopaedic surgeons virtually identified the optimal entry point and direction of the two threaded wires for each case. 3D printed drill guides were designed specific to each surgical plan, with one side shaped to fit the patient’s bone and the other side containing holes to guide the surgical drill. Each surgeon performed three guided (using the drill guides) and three conventional (freehand) simulated procedures on each case. Each femur model was laser scanned and digitally matched to the preoperative model for evaluation of entry points and wire angulations. We compared wire entry point, wire angulation, procedure time and number of x-rays between guided and freehand simulated surgeries.

Results

The guided group (1.4 ± 0.9 mm; 2.5° ± 1.4°) was significantly more accurate than the freehand group (5.8 ± 3.2 mm; 5.3° ± 4.4°) for wire entry location and angulation (p < 0.001). Guided surgeries required significantly less drilling time and intraoperative x-rays (90.5 ± 42.2 s, 3 ± 1 scans) compared to the conventional surgeries (246.8 ± 122.1 s, 14 ± 5 scans) (p < 0.001).

Conclusions

We conclude that CT-based preoperative planning and intraoperative navigation using individualized drill guides allow for improved accuracy of wires, reduced operative time and less radiation exposure in simulated hips.

Clinical relevance

This preliminary study shows promising results, suggesting potential direct benefits to SCFE patients by necessitating less time under anesthesia and less intra-operative radiation exposure to patients, and increasing surgical accuracy.

3D - Printed Patient Specific Instrumentation in Corrective Osteotomy of the Femur and Pelvis: A Review of the Literature

Background

The paediatric patient population has considerable variation in anatomy. The use of Computed Tomography (CT)-based digital models to design three-dimensionally printed patient specific instrumentation (PSI) has recently been applied for correction of deformity in orthopedic surgery. This review sought to determine the existing application of this technology currently in use within paediatric orthopaedics, and assess the potential benefits that this may provide to patients and surgeons.

Methods

A review was performed of MEDLINE, EMBASE, and CENTRAL for published literature, as well as Web of Science and clinicaltrials.gov for grey literature. The search strategy revolved around the research question: “What is the clinical impact of using 3D printed PSI for proximal femoral or pelvic osteotomy in paediatric orthopaedics?” Two reviewers, using predetermined inclusion criteria, independently performed title and abstract review in order to select articles for full text review. Data extracted included effect on operating time and intraoperative image use, as well as osteotomy and screw positioning accuracy. Data were combined in a narrative synthesis; meta-analysis was not performed given the diversity of study designs and interventions.

Results

In total, ten studies were included: six case control studies, three case series and a case report. Five studies directly compared operating time using PSI to conventional techniques, with two showing a significant decrease in the number of intraoperative images and operative time. Eight studies reported improved accuracy in executing the surgical plan compared to conventional methods.

Conclusion

Compared to conventional methods of performing femoral or pelvic osteotomy, use of PSI has led to improved accuracy and precision, decreased procedure times, and decreased intra-operative imaging requirements. Additionally, the technology has become more cost effective and accessible since its initial inception and use.

Supplementary Information

The online version contains supplementary material available at 10.1186/s41205-020-00087-0.

Translatory hip kinematics measured with optoelectronic surgical navigation

PURPOSE

An optoelectronic surgical navigation system was used to detect small but measurable translational motion of human hip cadavers in high-range passive motions. Kinematic data were also examined to demonstrate the role of soft tissues in constraining hip translation.

METHODS

Twelve cadaver hips were scanned using CT, instrumented for navigation, and passively taken through motion assessment. Center of the femoral head was tracked in the acetabular coordinates. Maximum non-impinging translation of the femoral head for each specimen hip was reported. This was repeated for 5 tissue states: whole, exposed to the capsule, partially or fully incised capsule, resection of the ligamentum teres and labrectomy. Femoral motions were compared to the reported value for ideal ball and socket model.

RESULTS

Whole and exposed hips underwent maximal translations of [Formula: see text] and [Formula: see text] mm, respectively. These translational motions were statistically significantly different from reported value for a purely spherical joint, [Formula: see text]. Further tissue removal almost always significantly increased maximum non-impingement translational motion with [Formula: see text].

CONCLUSION

We found subtle but definite translations in every cadaver hip. There was no consistent pattern of translation. It is possible to use the surgical navigation systems for the assessment of human hip kinematics intra-operatively and improve the treatment of total hip arthroplasty patients by the knowledge of the fact that their hips translate. Better procedure selection and implantation optimization may arise from improved understanding of the motion of this critically important human joint.

Analyzing shoulder translation with navigation technology

PURPOSE

Asymmetric stress imposed on the shoulder can lead to anterior shoulder instability in young athletes who perform repetitive overhead motions. A common treatment, surgical anterior capsule tightening, assumes that the instability is caused by abnormal anterior laxity. This study investigated the possibility that one element of overall imbalance, posterior capsular tightness, could be an underlying reason for shoulder instability. Surgical navigation technology, which is more accurate than whole-body motion-capture systems, was used to study anterior translational motions.

METHOD

The study was used four cadaver shoulders, with the scapula and rotator cuff muscles intact. Opto-electronic surgical navigation localization devices were mounted on the scapula and humerus to accurately capture positions and orientations. The shoulders were passively moved through 7 motions, 5 of simple angulation and 2 combinations of clinical interest. Each motion was repeated in 4 different soft-tissue states: rotator cuff intact, capsule intact, and surgically induced capsular tightnesses of 5 and 10mm.

RESULTS

The shoulders had significantly greater anterior translation when the posterior capsule was artificially tightened (p < 0.05); this was particularly in movements that combined abduction with internal or external rotation, which are typical overhead sports motions. Overall translation was indifferent to whether the shoulders were intact or dissected down to the capsule, as was translation during flexion was indifferent to dissection state (p > 0.95).

CONCLUSION

Surgical navigation technology can easily be used to analyze cadaveric shoulder motion, with opportunities for adaptation to anesthetized patients. Results suggest that the inverse of artificial tightening, such as surgical release of the posterior capsule, may be an effective minimally invasive treatment of chronic shoulder dislocation subsequent to sports motions.