What is the impact of miniscrew-assisted rapid palatal expansion on the midfacial soft tissues? A prospective three-dimensional stereophotogrammetry study

OBJECTIVES

To evaluate the midfacial soft tissue changes of the face in patients treated with miniscrew-assisted rapid palatal expansion (MARPE).

MATERIALS AND METHODS

3D facial images and intra-oral scans (IOS) were obtained before expansion (T0), immediately after completion of expansion (T1), and 1 year after expansion (T2). The 3D images were superimposed and two 3D distance maps were generated to measure the midfacial soft tissue changes: immediate effects between timepoints T0 and T1 and overall effects between T0 and T2. Changes of the alar width were also measured and dental expansion was measured as the interpremolar width (IPW) on IOS.

RESULTS

Twenty-nine patients (22 women, 7 men, mean age 25.9 years) were enrolled. The soft tissue in the regions of the nose, left of philtrum, right of philtrum, and upper lip tubercle demonstrated a statistically significant anterior movement of 0.30 mm, 0.93 mm, 0.74 mm, and 0.81 mm, respectively (p < 0.01) immediately after expansion (T0-T1). These changes persisted as an overall effect (T0-T2). The alar width initially increased by 1.59 mm, and then decreased by 0.08 mm after 1 year, but this effect was not significant. The IPW increased by 4.58 mm and remained stable 1 year later. There was no significant correlation between the increase in IPW and alar width (r = 0.35, p = 0.06).

CONCLUSIONS

Our findings indicate that MARPE results in significant but small changes of the soft tissue in the peri-oral and nasal regions. However, the clinical importance of these findings is limited.

CLINICAL RELEVANCE

MARPE is an effective treatment modality to expand the maxilla, incurring only minimal and clinically insignificant changes to the midfacial soft tissues.

What is the Oral Health-related Quality of Life following Miniscrew-Assisted Rapid Palatal Expansion (MARPE)? A prospective clinical cohort study

Background

Miniscrew-Assisted Rapid Palatal Expansion (MARPE) is a non-surgical orthodontic treatment for transverse maxillary deficiency. This study aimed to investigate the Oral Health-related Quality of Life (OHRQoL) and pain perception of patients undergoing MARPE treatment.

Methods

42 consecutive patients (9 men, 33 women) from the age of 16 onwards (mean: 27.4 ± 9.3 years; range 17.1–55.7 years) who received a MARPE treatment were included. OHRQoL was assessed with the short form of the Oral Health Impact Profile (OHIP-14) questionnaire. Patients filled out the questionnaire at baseline (T0) and weekly during the expansion phase (P1) and in the post-expansion phase (P2). Pain intensity was assessed with a Visual Analogue Scale (VAS) questionnaire and filled out daily during expansion, along with a question on the intake of analgesics. The mean weekly and total OHIP-score and OHIP-score per domain were calculated at T0, P1 and P2, as well as mean weekly and total VAS-scores for average pain, maximum pain and analgesics intake during P1. Kruskal–Wallis tests were used to test for differences in OHIP between T0, P1 and P2. The level of significance was set at 0.05.

Results

The mean OHIP-score was 10.86 ± 9.71 at T0 and increased to 17.18 ± 10.43 during P1 (p < 0.001), after which it returned to pre-expansion levels, 9.27 ± 7.92 (p = 0.907) during P2. At the domain level, there was a statistically significant increase in OHIP-score at P1 for functional limitation, physical pain, psychological discomfort and social disability. The mean VAS-score for average pain during expansion was 16.00 ± 19.73 mm. Both OHIP-score (25.00 ± 10.25), average pain (33.72 ± 16.88 mm), maximum pain (44.47 ± 17.99 mm) and analgesics intake (59%) were highest at initiation of the expansion and decreased by the end of expansion.

Conclusions

MARPE is a generally well-tolerated expansion treatment. A temporary decline in OHRQoL and moderate pain are present at the start of expansion, followed by a recovery of OHRQoL and very mild pain during the rest of treatment. Clinicians should be aware of the effects of MARPE on patients’ quality of life and manage the expected discomfort and impediments with adequate communication and patient education.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults: a systematic review and meta-analysis

Background

Miniscrew-Assisted Rapid Palatal Expansion (MARPE) is a non-surgical treatment for transverse maxillary deficiency. However, there is limited evidence concerning its efficacy.

Objectives

This systematic review aims to evaluate the efficacy of MARPE in late adolescents and adults by assessing success rate and skeletal and dental transverse maxillary expansion, as well as treatment duration, dental and periodontal side effects and soft tissue effects.

Search methods

Seven electronic databases were searched (MEDLINE, Embase, Cochrane Library, Web of Science, Scopus, ProQuest and ClinicalTrials.gov) without limitations in November 2020.

Selection criteria

Randomized and non-randomized clinical trials and observational studies on patients from the age of 16 onwards with transverse maxillary deficiency who were treated with MARPE and which included any of the predefined outcomes.

Data collection and analysis

Inclusion eligibility screening, data extraction and risk of bias assessment were performed independently in duplicate. When possible, exploratory meta-analyses of mean differences (MDs) with their 95% confidence intervals (CIs) were conducted, followed by the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) analysis of the evidence quality.

Results

Eight articles were included: two prospective and six retrospective observational studies. One study had a moderate risk of bias, whereas seven studies had a serious risk of bias. GRADE quality of evidence was very low. MARPE showed a high success rate (mean: 92.5%; 95%CI: 88.7%–96.3%), resulting in a significant skeletal width increase (MD: 2.33 mm; 95%CI: 1.63 mm–3.03 mm) and dental intermolar width increase (MD: 6.55 mm; 95%CI: 5.50 mm–7.59 mm). A significant increase in dental tipping, a decrease in mean buccal bone thickness and buccal alveolar height, as well as nasal soft tissue change was present (P < 0.05). The mean duration of expansion ranged from 20 to 126 days.

Limitations

One of the main drawbacks was the lack of high-quality prospective studies in the literature.

Conclusions and implications

MARPE is a treatment modality that is associated with a high success rate in skeletal and dental maxillary expansion. MARPE can induce dental and periodontal side effects and affect peri-oral soft tissues. Given the serious risk of bias of the included studies, careful data interpretation is necessary and future research of higher quality is strongly recommended.

Registration

PROSPERO (CRD42020176618).

Funding

No grants or any other support funding were received.

The role of muscular traction in the occurrence of skeletal relapse after advancement bilateral sagittal split osteotomy (BSSO): A systematic review

The aim of this systematic review was (i) to determine the role of muscular traction in the occurrence of skeletal relapse after advancement BSSO and (ii) to investigate the effect of advancement BSSO on the perimandibular muscles. This systematic review reports in accordance with the recommendations proposed by the Preferred Reporting Items for Systematic Reviews and Meta‐Analyses (PRISMA) statement. Electronic database searches were performed in the databases MEDLINE, Embase and Cochrane Library. Inclusion criteria were as follows: assessment of relapse after advancement BSSO; assessment of morphological and functional change of the muscles after advancement BSSO; and clinical studies on human subjects. Exclusion criteria were as follows: surgery other than advancement BSSO; studies in which muscle activity/traction was not investigated; and case reports with a sample of five cases or fewer, review articles, meta‐analyses, letters, congress abstracts or commentaries. Of the initial 1006 unique articles, 11 studies were finally included. In four studies, an intervention involving the musculature was performed with subsequent assessment of skeletal relapse. The changes in the morphological and functional properties of the muscles after BSSO were studied in seven studies. The findings of this review demonstrate that the perimandibular musculature plays a role in skeletal relapse after advancement BSSO and may serve as a target for preventive strategies to reduce this complication. However, further research is necessary to (i) develop a better understanding of the role of each muscle group, (ii) to develop new therapeutic strategies and (iii) to define criteria that allow identification of patients at risk.

Nasolabial shape and aesthetics in unilateral cleft lip and palate: an analysis of nasolabial shape using a mean 3D facial template

The aim of this study was to determine the amount of deviation in nasolabial shape in patients with a cleft compared with an average non-cleft face, and to assess whether this difference is related to nasolabial aesthetics. Three-dimensional stereophotogrammetric images of 60 patients with a unilateral cleft were used. To quantify shape differences, four average non-cleft faces were constructed from stereophotogrammetric images of 141 girls and 60 boys. Three-dimensional shape differences were calculated between superimposed cleft faces and the average non-cleft face for the same sex and age group. Nasolabial aesthetics were rated with the modified Asher-McDade Aesthetic Index using a visual analogue scale (VAS). Mean VAS scores ranged from 51.44 to 60.21 for clefts, with lower aesthetic ratings associated with increasing cleft severity. Shape differences were found between cleft faces and the average non-cleft face. No relationship was found for the VAS, age, and sex, except that a lower VAS was related to a higher nose and lip distance between the superimposed cleft and average non-cleft faces for nasal profile (P= 0.02), but the explained variance was low (R²=0.066). In conclusion, except for nasal profile, nasolabial aesthetics were not influenced by the extent of shape differences from the average non-cleft face.

Symmetry of palatal shape during the first year of life in healthy infants

Objectives

The purpose of this study was to quantify the symmetry of the alveolar process of the maxilla and palate during the first year of life in healthy infants with the help of a semiautomatic segmentation technique.

Materials and methods

Maxillary plaster models of seventy healthy babies at 0, 3, 6, 9, and 12 months were collected and digitized. A semiautomatic segmentation tool was used to extract the alveolus and palate. The resulting model was aligned within a reference frame and mirrored on its medial plane. Distance maps were created and analyzed to compare and quantify the differences between the two hemispheres. Additional hemispherical width and area measurements were performed. An ANOVA test with additional post hoc tests was performed to check if the symmetry changed during development. Finally, the results were tested on intra- and interobserver variability.

Results

The absolute mean inter-surface distance between the original and mirrored models in each age group ranged between 0.23 and 0.30 mm. Width and area analysis showed a small but significant larger left palatal hemisphere. ANOVA and post hoc tests showed no significant difference in symmetry between groups. Reliability analysis showed no significant differences between observers.

Conclusions

This study showed that in this infant population, only a small degree of palatal asymmetry was present, which can be considered as normal and clinically irrelevant.

Clinical relevance

The data from this study can be used in future comparative studies as reference data. Furthermore, modeling of these data can help in predicting the growth pattern, which may lead to improved treatment protocols for children with craniofacial anomalies.

Electronic supplementary material

The online version of this article (10.1007/s00784-020-03403-4) contains supplementary material, which is available to authorized users.

Non-Syndromic Cleft Lip with or without Cleft Palate: Genome-Wide Association Study in Europeans Identifies a Suggestive Risk Locus at 16p12.1 and Supports SH3PXD2A as a Clefting Susceptibility Gene

Non-syndromic cleft lip with or without cleft palate (nsCL/P) ranks among the most common human congenital malformations, and has a multifactorial background in which both exogenous and genetic risk factors act in concert. The present report describes a genome-wide association study (GWAS) involving a total of 285 nsCL/P patients and 1212 controls from the Netherlands and Belgium. Twenty of the 40 previously reported nsC/LP susceptibility loci were replicated, which underlined the validity of this sample. SNV-based analysis of the data identified an as yet unreported suggestive locus at chromosome 16p12.1 (p-value of the lead SNV: 4.17 × 10^-7). This association was replicated in two of three patient/control replication series (Central European and Yemeni). Gene analysis of the GWAS data prioritized SH3PXD2A at chromosome 10q24.33 as a candidate gene for nsCL/P. To date, support for this gene as a cleft gene has been restricted to data from zebrafish and a knockout mouse model. The present GWAS was the first to implicate SH3PXD2A in non-syndromic cleft formation in humans. In summary, although performed in a relatively small sample, the present GWAS generated novel insights into nsCL/P etiology.

Three-dimensional facial development of children with unilateral cleft lip and palate during the first year of life in comparison with normative average faces

Background

Stereophotogrammetry can be used to study facial morphology in both healthy individuals as well as subjects with orofacial clefts because it shows good reliability, ability to capture images rapidly, archival capabilities, and high resolution, and does not require ionizing radiation. This study aimed to compare the three-dimensional (3D) facial morphology of infants born with unilateral cleft lip and palate (UCLP) with an age-matched normative 3D average face before and after primary closure of the lip and soft palate.

Methods

Thirty infants with a non-syndromic complete unilateral cleft lip, alveolus, and palate participated in the study. Three-dimensional images were acquired at 3, 6, 9, and 12 months of age. All subjects were treated according to the primary surgical protocol consisting of surgical closure of the lip and the soft palate at 6 months of age. Three-dimensional images of UCLP patients at 3, 6 (pre-treatment), 9, and 12 months of age were superimposed on normative datasets of average facial morphology using the children’s reference frame. Distance maps of the complete 3D facial surface and the nose, upper lip, chin, forehead, and cheek regions were developed.

Results

Assessments of the facial morphology of UCLP and control subjects by using color-distance maps showed large differences in the upper lip region at the location of the cleft defect and an asymmetry at the nostrils at 3 and 6 months of age. At 9 months of age, the labial symmetry was completely restored although the tip of the nose towards the unaffected side showed some remnant asymmetry. At 12 months of age, the symmetry of the nose improved, with only some remnant asymmetry noted on both sides of the nasal tip. At all ages, the mandibular and chin regions of the UCLP patients were 2.5–5 mm posterior to those in the average controls.

Conclusion

In patients with UCLP deviations from the normative average 3D facial morphology of age-matched control subjects existed for the upper lip, nose, and even the forehead before lip and soft palate closure was performed. Compared to the controls symmetry in the upper lip was restored, and the shape of the upper lip showed less variation after primary lip and soft palate closure. At this early age, retrusion of the soft-tissue mandible and chin, however, seems to be developing already.

Three dimensional maxillary growth modeling in newborns

OBJECTIVES

The aim of this study was to develop an accurate and intuitive semi-automatic segmentation technique to calculate an average maxillary arch and palatal growth profile for healthy newborns in their first year of life.

MATERIALS AND METHODS

Seventy babies born between 1985 and 1988 were included in this study. Each child had five impressions made in the first year after birth that were digitalized. A semi-automatic segmentation tool was developed and used to assess the maxillary dimensions. Finally, random effect models were built to describe the growth and build a simulation population of 10,000 newborns. The segmentation was tested for inter- and intra-observer variability.

RESULTS

The Pearson correlation coefficient for each of the variables was between 0.94 and 1.00, indicating high inter-observer agreement. The paired sample t test showed that, except for the tuberosity distance, there were small, but significant differences in the landmark placements between observers. Intra-observer repeatability was high, with Pearson correlation coefficients ranging from 0.87 to 1.00 for all measurements, and the mean differences were not significant. A third or second degree growth curve could be successfully made for each parameter.

CONCLUSIONS

These findings indicated this method could be used for objective clinical evaluation of maxillary growth.

CLINICAL RELEVANCE

The resulting growth models can be used for growth studies in healthy newborns and for growth and treatment outcome studies in children with cleft lip and palate or other craniofacial anomalies.

Placement of an antibiotic oral pack on the hard palate after primary cleft palatoplasty: a randomized controlled trial into the effect on fistula rates

OBJECTIVE

The objective of this study is to determine whether placement of an antibiotic oral pack on the hard palate reduces fistula rates after primary cleft palatoplasty.

SUBJECTS AND METHODS

This study was a parallel blocked randomized controlled trial. The study consisted of two groups of 100 patients each with non-syndromic unilateral complete cleft lip, alveolus, and hard and soft palate that underwent primary palatoplasty. Group A had an oral pack placed on the hard palate for 5 days postoperatively while group B did not. Occurrence of fistulae between both groups was tested using odds ratios (OR).

RESULTS

In 2% of the patients in group A, a fistula was found 6 months after palatal surgery. In contrast, in 21% of the patients in group B, a palatal fistula could be confirmed. The fistula occurrence in group A was statistically significantly lower than that in group B (OR = 0.0768, CI = [0.02 … 0.34], p < 0.001).

CONCLUSION

The findings of this study provide evidence that the rate of fistula formation after primary palatoplasty is significantly reduced if a pack soaked with antibiotic cream is placed on the palate postoperatively for 5 days.

CLINICAL RELEVANCE

The use of an antibiotic pack after cleft palate repair can be recommended to prevent occurrence of oronasal fistulae.

Validation of 3D documentation of palatal soft tissue shape, color, and irregularity with intraoral scanning

Objectives

The purpose of this study was to assess the feasibility of 3D intraoral scanning for documentation of palatal soft tissue by evaluating the accuracy of shape, color, and curvature.

Materials and methods

Intraoral scans of ten participants’ upper dentition and palate were acquired with the TRIOS® 3D intraoral scanner by two observers. Conventional impressions were taken and digitized as a gold standard. The resulting surface models were aligned using an Iterative Closest Point approach. The absolute distance measurements between the intraoral models and the digitized impression were used to quantify the trueness and precision of intraoral scanning. The mean color of the palatal soft tissue was extracted in HSV (hue, saturation, value) format to establish the color precision. Finally, the mean curvature of the surface models was calculated and used for surface irregularity.

Results

Mean average distance error between the conventional impression models and the intraoral models was 0.02 ± 0.07 mm (p = 0.30). Mean interobserver color difference was − 0.08 ± 1.49° (p = 0.864), 0.28 ± 0.78% (p = 0.286), and 0.30 ± 1.14% (p = 0.426) for respectively hue, saturation, and value. The interobserver differences for overall and maximum surface irregularity were 0.01 ± 0.03 and 0.00 ± 0.05 mm.

Conclusions

This study supports the hypothesis that the intraoral scan can perform a 3D documentation of palatal soft tissue in terms of shape, color, and curvature.

Clinical relevance

An intraoral scanner can be an objective tool, adjunctive to the clinical examination of the palatal tissue.

Integration of digital dental casts in cone beam computed tomography scans-a clinical validation study

OBJECTIVES

Images derived from cone beam computed tomography (CBCT) scans lack detailed information on the dentition and interocclusal relationships needed for proper surgical planning and production of surgical splints. To get a proper representation of the dentition, integration of a digital dental model into the CBCT scan is necessary. The aim of this study was to validate a simplified protocol to integrate digital dental models into CBCT scans using only one scan.

MATERIALS AND METHODS

Conventional protocol A used one combined upper and lower impression and two CBCT scans. The new protocol B included placement of ten markers on the gingiva, one CBCT scan, and two separate impressions of the upper and lower dentition. Twenty consecutive patients, scheduled for mandibular advancement surgery, were included. To validate protocol B, 3-dimensional reconstructions were made, which were compared by calculating the mean intersurface distances obtained with both protocols.

RESULTS

The mean distance for all patients for the upper jaw is 0.39 mm and for the lower jaw is 0.30 mm. For ten out of 20 patients, all distances were less than 1 mm. For the other ten patients, all distances were less than 2 mm.

CONCLUSIONS

Mean distances of 0.39 and 0.30 mm are clinically acceptable and comparable to other studies; therefore, this new protocol is clinically accurate.

CLINICAL RELEVANCE

This new protocol seems to be clinically accurate. It is less time consuming, gives less radiation exposure for the patient, and has a lower risk for positional errors of the impressions compared to other integration protocols.

Dentition Patterns in Different Unilateral Cleft Lip Subphenotypes

Oral clefts play an essential role in disturbed odontogenesis of the deciduous and permanent dentition, yet little is known about this relationship. We investigated, within the categories cleft lip with or without alveolus (CL ± A) and cleft lip, alveolus and palate (CLAP), whether different CL subphenotypes based on morphological severity of the cleft show different dentition patterns and whether a more detailed subdivision of the incomplete CL has clinical relevance. In this retrospective study, 345 children with nonsyndromic unilateral CL ± A and CLAP from the Dutch Association for Cleft Palate and Craniofacial Anomalies (NVSCA) registry were included to assess the association between the CL subphenotypes and lateral incisor patterns. Five different deciduous and permanent patterns of the lateral incisor were distinguished: located in normal position (pattern z/Z), in the anterior segment (pattern x/X) or in the posterior segment of the cleft (pattern y/Y), one in each segment of the cleft (pattern xy/XY), and agenesis of the lateral incisor (pattern ab/AB). Analyses were performed by using multinomial logistic regression models. Children born with a vermillion notch or a one-third to two-thirds CL were most likely to have a deciduous pattern x and a permanent pattern X, while children born with a two-thirds to subtotal CL were most likely to have deciduous pattern xy and a permanent pattern X compared to children with a complete CL that predominantly had deciduous pattern y and a permanent pattern AB. Based on the relationship of the CL morphology with the deciduous dentition, subdivision of the CL morphology into vermillion notch to two-thirds CL, two-thirds to subtotal CL, and complete CL appears to be an optimal subdivision. Our results indicate that a more detailed subdivision of the CL has clinical relevance and that critical factors in the pathogenesis of the CL are also critical for the odontogenesis.

Comparison of two- and three-dimensional assessment methods of nasolabial appearance in cleft lip and palate patients: Do the assessment methods measure the same outcome?

OBJECTIVE

For the assessment of the nasolabial appearance in cleft patients, a widely accepted, reliable scoring system is not available. In this study four different methods of assessment are compared, including 2D and 3D asymmetry and aesthetic assessments.

METHODS

The data and ratings from an earlier study using the Asher-McDade aesthetic index on 3D photographs and the outcomes of 3D facial distance mapping were compared to a 2D aesthetic assessment, the Cleft Aesthetic Rating Scale, and to SymNose, a computerized 2D asymmetry assessment technique. The reliability and correlation between the four assessment techniques were tested using a sample of 79 patients.

RESULTS

The 3D asymmetry assessment had the highest reliability and could be performed by just one observer (Intraclass correlation coefficient (ICC): 0.99). The 2D asymmetry assessment of the nose was highly reliable when performed by just one observer (ICC: 0.89). However, for the 2D asymmetry assessment of the lip more observers were needed. For the 2D aesthetic assessments 3 observers were needed. The 3D aesthetic assessment had the lowest single-observer reliability (ICC: 0.38-0.56) of all four techniques. The agreement between the different assessment methods is poor to very poor. The highest correlation (R: 0.48) was found between 2D and 3D aesthetic assessments. Remarkably, the lowest correlations were found between 2D and 3D asymmetry assessments (0.08-0.17).

CONCLUSION

Different assessment methods are not in agreement and seem to measure different nasolabial aspects. More research is needed to establish exactly what each assessment technique measures and which measurements or outcomes are relevant for the patients.

An accuracy study of computer-planned implant placement in the augmented maxilla using osteosynthesis screws

Previous research on the accuracy of flapless implant placement of virtually planned implants in the augmented maxilla revealed unfavourable discrepancies between implant planning and placement. By using the osteosynthesis screws placed during the augmentation procedure, the surgical template could be optimally stabilized. The purpose of this study was to validate this method by evaluating its clinically relevant accuracy. Twelve consecutive fully edentulous patients with extreme resorption of the maxilla were treated with a bone augmentation procedure. Virtual implant planning was performed and a surgical template was manufactured. Subsequently, six implants were installed using the surgical template, which was only supported by the osteosynthesis screws. Implant deviations between planning and placement were calculated. A total of 72 implants were installed. Mean deviations found in the mesiodistal direction were 0.817mm at the implant tip and 0.528mm at the implant shoulder. The angular deviation was 2.924°. In the buccolingual direction, a deviation of 1.038mm was registered at the implant tip and 0.633mm at the implant shoulder. The angular deviation was 3.440°. This study showed that implant placement in the augmented maxilla using a surgical template supported by osteosynthesis screws is accurate.

Accuracy of virtually 3D planned resection templates in mandibular reconstruction

OBJECTIVE

Since reconstruction of composite defects in the head and neck region is a challenging and demanding problem for head and neck surgeons, surgical aids have been sought for decades. The purpose of this study was to evaluate the accuracy of prefabricated surgical resection templates used in mandibular segmental resections in comparison to the virtual surgical plan.

MATERIALS AND METHODS

A prospective study was performed in 11 consecutive patients, with a primary T4 oral squamous cell carcinoma or osteoradionecrosis of the mandible. Preoperatively, a CBCT scan was acquired to delineate the size and extension of tumor invasion; a virtual patient-specific resection template was designed based on this information. Intraoperatively, the resection template was positioned on the mandible and secured using four fixation screws. Postoperatively, a CBCT scan was acquired. This scan was superimposed on the preoperative scan. Positioning of the resection template and inclination of the resection planes were evaluated on the virtual head model. In order to test the interobserver reliability of these new measurement methods, two different observers executed all measurements.

RESULTS

The mean shift of the proximal resection templates was 3.76 mm (standard deviation [SD] 3.10 mm). For the distal resection templates, the mean shift was 3.06 mm (SD 1.57 mm) with no significant interobserver difference (ICC = 0.99). An absolute mean deviation of 8.5° (SD 5.3°) was found for the proximal resection angle and 10.4° (SD 5.0°) for the distal resection angle. Again, no significant interobserver differences were found (ICC = 0.98).

CONCLUSION

The resection templates used in this study proved reasonably accurate. Although the concept of virtual surgical planning aids significantly in mandibular reconstruction with microvascular free flaps, further improvement of resection accuracy is necessary for further improvement of reconstruction accuracy.

Three-dimensional evaluation of the alar cinch suture after Le Fort I osteotomy

Orthognathic surgery has an influence on the overlying soft tissues of the translated bony maxillomandibular complex. Improvements in both function and facial appearance are the goals of surgery. However, unwanted changes to the soft tissues, especially in the nose region, frequently occur. The most common secondary change in the nasolabial region is widening of the alar base. Various surgical techniques have been developed to minimize this effect. The purpose of this study was to evaluate the changes in the nasal region due to orthognathic surgery, especially the alar width and nasal volume, using combined cone beam computed tomography (CBCT) and three-dimensional (3D) stereophotogrammetry datasets. Twenty-six patients who underwent a Le Fort I advancement osteotomy between 2006 and 2013 were included. From 2006 to 2010, no alar base cinch sutures were performed. From 2010 onwards, alar base cinch sutures were used. Preoperative and postoperative documentation consisted of 3D stereophotogrammetry and CBCT scans. 3D measurements were performed on the combined datasets, and the alar base width and nose volume were analyzed. No difference in alar base width or nose volume was observed between patients who had undergone an alar cinch and those who had not. Postoperatively the nose widened and the volume increased in both groups.

AGORA, a data- and biobank for birth defects and childhood cancer

BACKGROUND

Research regarding the etiology of birth defects and childhood cancer is essential to develop preventive measures, but often requires large study populations. Therefore, we established the AGORA data- and biobank in the Netherlands. In this study, we describe its rationale, design, and ongoing data collection.

METHODS

Children diagnosed with and/or treated for a structural birth defect or childhood cancer and their parents are invited to participate in the AGORA data- and biobank. Controls are recruited through random sampling from municipal registries. The parents receive questionnaires about demographics, family and pregnancy history, health status, prescribed medication, lifestyle, and occupational exposures before and during the index pregnancy. In addition, blood or saliva is collected from children and parents, while medical records are reviewed for diagnostic information.

RESULTS

So far, we have collected data from over 6,860 families (3,747 birth defects, 905 childhood cancers, and 2,208 controls). The types of birth defects vary widely and comprise malformations of the digestive, respiratory, and urogenital tracts as well as facial, cardiovascular, kidney, skeletal, and central nervous system anomalies. The most frequently occurring childhood cancer types are acute lymphatic leukemia, Hodgkin and non-Hodgkin lymphoma, Wilms' tumor, and brain and spinal cord tumors. Our genetic and/or epidemiologic studies have been focused on hypospadias, anorectal malformations, congenital anomalies of the kidney and urinary tract (CAKUT), and orofacial clefts.

CONCLUSION

The large AGORA data- and biobank offers great opportunities for investigating genetic and nongenetic risk factors for disorders in children and is open to collaborative initiatives. Birth Defects Research (Part A) 106:675-684, 2016. © 2016 Wiley Periodicals, Inc.

Postoperative socket irrigation with drinking tap water reduces the risk of inflammatory complications following surgical removal of third molars: a multicenter randomized trial

Objectives

The primary aim of the present study was to evaluate the effectiveness of postoperative irrigation of the socket with drinking tap water on inflammatory complications following lower third molar removal.

Material and methods

A multicenter randomized controlled trial was carried out from June 2013 to June 2014. In one arm of the study, patients were instructed to irrigate the tooth socket and surgical site with a Monoject® Curved 412 Tip Syringe (Tyco/healthcare-Kendall, Mansfield, MA, USA) with tap water. In a second arm of the study, the standard postoperative instructions did not include irrigation instructions. The incidences of alveolar osteitis and wound infection were recorded for each group and analyzed by the Fisher’s exact test.

Results

A total of 280 patients with 333 mandibular third molars were analyzed. According to the intention-to-treat (ITT) analysis, inflammatory complications occurred in 18 cases in the Monoject® group (11.4 %) compared to 34 cases (19.1 %) in the control group (p = 0.04). These complications were associated with significant worse outcomes regarding quality of life, pain, and trismus and caused significantly more missed days of work or study. Female gender, age >26, bone removal, deep impacted third molars, less experienced surgeons, and a high amount of debris at the surgical site were also identified as risk factors for developing inflammatory complications following lower third molar removal.

Conclusion

Irrigation of the surgical site with drinking tap water using a curved syringe following removal of third molars is effective in reducing the risk of inflammatory complications.

Clinical relevance

Water is a very accessible, cost-effective irrigant without side effects and the results from this study have proven that it can be used to reduce the risk of inflammatory complications and associated morbidity following lower third molar removal.

Does powdering of the dentition increase the accuracy of fusing 3D stereophotographs and digital dental casts

OBJECTIVES

The shiny vestibular surfaces of teeth make it difficult to match digital dental casts to 3D stereophotogrammetric images of patient teeth. This study tested whether reducing this shininess by coating the teeth with titanium-oxide powder might improve the accuracy of the matching procedure.

METHODS

Twenty patients participated in the study. For each patient, 3D stereophotogrammetric images were taken without and with a powder coating. Separately, digital dental casts were created. Next, the digital dental casts were fused with the 3D stereophotogrammetric images of either non-powdered or powdered dentition. Distance maps were created to evaluate the inter-surface distance between the digital dental cast and the 3D images. The matching accuracy was compared for dentition with and without powdering.

RESULTS

Of all recorded distances between corresponding points, 95% was smaller than 0.84mm for the powdered dentition and smaller than 0.90mm for the non-powdered dentition. Although powdered dentition showed significantly better matching than non-powdered dentition, the difference was less than 0.1mm. Intra-observer statistics showed that five out of 24 repetitions gave significantly different results, but only for dentition that was not powdered.

LIMITATIONS

The patients did not have any major malocclusions. Severe malocclusions might cause greater difficulty in matching the dentition without powder. Only one type of powder was used, but it effectively reduced shininess.

CONCLUSION

Powdering the dentition had a small, but significant, positive effect on matching. However, this effect was of minor clinical importance. Therefore, we do not recommend powdering the dentition for 3D stereophotogrammetric images used for matching procedures.

Clinical relevance of cone beam computed tomography in mandibular third molar removal: A multicentre, randomised, controlled trial

PURPOSE

The aims of this study were to investigate the effectiveness of cone beam computed tomography (CBCT) compared to panoramic radiography (PR), prior to mandibular third molar removal, in reducing patient morbidity, and to identify risk factors associated with inferior alveolar nerve (IAN) injury.

MATERIAL AND METHODS

This multicentre, randomised, controlled trial was performed at three centres in the Netherlands. Adults with an increased risk for IAN injury, as diagnosed from PR, were included in the study. In one arm of the study, patients underwent an additional CBCT prior to third molar surgery. In a second arm of the study, no additional radiographs were acquired. The primary outcome measure was the number of patient-reported altered sensations 1 week after surgery. As secondary outcome measures, the number of patients with objective IAN injury, with long-term (>6 months) IAN injury, the occurrence of other postoperative complications, the Oral Health Related Quality of Life-14 (OHIP-14) questionnaire responses, postoperative pain (visual analogue scale score), duration of surgery, number of emergency visits, and number of missed days of work or study were scored.

RESULTS

A total of 268 patients with 320 mandibular third molars were analysed according to the intention-to-treat principle. The overall incidence of IAN injury 1 week after surgery was 6.3%. No significant differences between CBCT and PR for temporary IAN injury (p = 0.64) and all other secondary outcomes were registered. A lingual position of the mandibular canal (MC) and narrowing, in which the diameter of the MC lumen was decreased at the contact area between the MC and the roots, were significant risk factors for temporary IAN injury.

CONCLUSION

Although CBCT is a valuable diagnostic adjunct for identification of an increased risk for IAN injury, the use of CBCT does not translate into a reduction of IAN injury and other postoperative complications, after removal of the complete mandibular third molar. In these selected cases of a high risk for IAN injury, an alternative strategy, such as monitoring or a coronectomy, might be more appropriate. (http://clinicaltrials.gov, NCT02071030).

Eye tracker based study: Perception of faces with a cleft lip and nose deformity

AIM

Quantification of visual attention directed towards cleft stigmata and its impact on the perception of selected personality traits.

METHODS

Forty observers were divided into two groups and their visual scan paths were recorded. Both groups observed a series of photographs displaying full frontal views of the faces of 18 adult patients with clefts, nine with residual cleft stigmata and nine with digitally-corrected stigmata (each patient only appeared once per series). Patients that appeared with residual stigmata in one series appeared digitally corrected in the other series and vice versa. Visual fixation times on the upper lip and nose were compared between the original and corrected photographs. Observers subsequently rated personality traits as perceived using visual analogue scales and the same photographs that they had observed in the series.

RESULTS

In faces depicting cleft stigmata observers spent more time looking at the oronasal region of interest, followed by the eyes (39.6%; SD 5.0 and 35.1%; SD 3.6, respectively, p = 0.0198). Observers spent more time looking at the cleft lip compared with the corrected lip (21.2%; SD 4.0 and 16.7%; SD 5.0, respectively, p = 0.006). The differences between questionnaire scores for faces with cleft stigmata compared with faces with corrected stigmata for withdrawn-sociable, discontent-content, lazy-assiduous, unimaginative-creative, unlikeable-likeable, and the sum of individual personality traits were not significant.

CONCLUSION

According to these findings, cleft lip and cleft nose have an attention-drawing potential with the cleft lip being the major attention drawing factor. These data do not provide supportive evidence for the notion reported in literature that patients with clefts are perceived as having negative personality traits.

Evaluation of the anterior mandibular donor site one year after secondary reconstruction of an alveolar cleft: 3-dimensional analysis using cone-beam computed tomography

The aim of this study was to analyse changes in the volume of the chin after harvest of a bone graft for secondary reconstruction of an alveolar cleft. Cone-beam computed tomographic (CT) scans of 27 patients taken preoperatively, and immediately and one year postoperatively, were analysed, and 3-dimensional hard-tissue reconstructions made. The hard-tissue segmentation of the scan taken one year postoperatively was subtracted from the segmentation of the preoperative scan to calculate the alteration in the volume of bone at the donor site (chin). A centrally-orientated persistent concavity at the buccal side of the chin was found (mean (range) 160 (0-500) mm(3)). At the lingual side of the chin, a central concavity remained (mean (range) volume 20 (0-80) mm(3)). Remarkably, at the periphery of this concavity there was overgrowth of new bone (mean (range) volume 350 (0-1600) mm(3)). Re-attachment of the muscles of the tongue resulted in a significantly larger central lingual defect one year postoperatively (p=0.01). We also measured minor alterations in volume of the chin at one year. Whether these alterations influence facial appearance and long term bony quality is to be the subject of further research.

Development of a three-dimensional hand model using 3D stereophotogrammetry: Evaluation of landmark reproducibility

BACKGROUND

Using three-dimensional (3D) photography, exact images of the human body can be produced. Over the last few years, this technique is mainly being developed in the field of maxillofacial reconstructive surgery, creating fusion images with computed tomography (CT) data for accurate planning and prediction of treatment outcome. However, in hand surgery, 3D photography is not yet being used in clinical settings.

METHODS

The aim of this study was to develop a valid method for imaging the hand using 3D stereophotogrammetry. The reproducibility of 30 soft tissue landmarks was determined using 3D stereophotogrammetric images. Analysis was performed by two observers on 20 3D photographs. Reproducibility and reliability of the landmark identification were determined using statistical analysis.

RESULTS

The intra- and interobserver reproducibility of the landmarks were high. This study showed a high reliability coefficient for intraobserver (1.00) and interobserver reliability (0.99). Identification of the landmarks on the palmar aspect of individual fingers was more precise than the identification of landmarks of the thumb.

CONCLUSIONS

This study shows that 3D photography can safely produce accurate and reproducible images of the hand, which makes the technique a reliable method for soft tissue analysis. 3D images can be a helpful tool in pre- and postoperative evaluation of reconstructive trauma surgery, in aesthetic surgery of the hand, and for educational purposes. The use in everyday practice of hand surgery and the concept of fusing 3D photography images with radiologic images of the interior hand structures needs to be further explored.

Three-dimensional facial analysis in acromegaly: a novel tool to quantify craniofacial characteristics after long-term remission

PURPOSE

The exact quantification of craniofacial characteristics in patients with acromegaly is important because it provides insight in the pathophysiology of the disease and offers a tool to evaluate the effects of treatment on tissue specific endpoints. However, until recently this was not feasible due to limitations of available cephalometric methods. The new technique of three-dimensional (3D) cephalometry enables the accurate quantification of facial anatomical characteristics of both soft tissue and bone. This is the first study that uses 3D cephalometry to analyze craniofacial disproportions in patients in long-term remission of acromegaly.

METHODS

Sixteen patients in remission of acromegaly for over 24 months (50% male, mean age 56.0 ± 10.7 years, mean body mass index 29.3 ± 5.5 kg/m(2)) were compared to 16 matched control subjects. A 3D cone beam computed tomography scan and 3D stereophotograph of each individual were acquired and analyzed using 3D cephalometry.

RESULTS

In addition to an accurate quantification of the classical craniofacial characteristics, 3D cephalometry, shows that many typical soft tissue deformities persist, even after long-term remission. Furthermore, we found that, compared to controls, the patients in remission of acromegaly have a wider face at the level of the zygoma and longer maxilla (p < 0.05).

CONCLUSIONS

3D cephalometry is an attractive novel imaging modality to accurately investigate craniofacial disproportions of both soft tissue and bony parts of the face in patients with acromegaly, which makes it a promising technique for future research purposes and clinical practice.

Three-dimensional facial simulation in bilateral sagittal split osteotomy: a validation study of 100 patients

PURPOSE

Three-dimensional (3D) virtual planning of orthognathic surgery in combination with 3D soft tissue simulation allows the surgeon and the patient to assess the 3D soft tissue simulation. This study was conducted to validate the predictability of the mass tensor model soft tissue simulation algorithm combined with cone-beam computed tomographic (CBCT) imaging for patients who underwent mandibular advancement using a bilateral sagittal split osteotomy (BSSO).

MATERIALS AND METHODS

One hundred patients were treated with a BSSO according to the Hunsuck modification. The pre- and postoperative CBCT scans were matched and the mandible was segmented and aligned. The 3D distance maps and 3D cephalometric analyses were used to calculate the differences between the soft tissue simulation and the actual postoperative results. Other study variables were age, gender, and amount of mandibular advancement or rotation.

RESULTS

For the entire face, the mean absolute error was 0.9 ± 0.3 mm, the mean absolute 90th percentile was 1.9 mm, and for all 100 patients the absolute mean error was less than or equal to 2 mm. The subarea with the least accuracy was the lower lip area, with a mean absolute error of 1.2 ± 0.5 mm. No correlation could be found between the error of prediction and the amount of advancement or rotation of the mandible or age or gender of the patient.

CONCLUSION

Overall, the soft tissue prediction algorithm combined with CBCT imaging is an accurate model for predicting soft tissue changes after mandibular advancement. Future studies will focus on validating the mass tensor model soft tissue algorithm for bimaxillary surgery.

Three-dimensional changes in nose and upper lip volume after orthognathic surgery

Orthognathic surgery aims to improve both the function and facial appearance of the patient. Translation of the maxillomandibular complex for correction of malocclusion is always followed by changes to the covering soft tissues, especially the nose and lips. The purpose of this study was to evaluate the changes in the nasal region and upper lip due to orthognathic surgery using combined cone beam computed tomography (CBCT) and three-dimensional (3D) stereophotogrammetry datasets. Patients who underwent a Le Fort I osteotomy, with or without a bilateral sagittal split osteotomy, were included in this study. Pre- and postoperative documentation consisted of 3D stereophotogrammetry and CBCT scans. 3D measurements were performed on the combined datasets and analyzed. Anterior translation and clockwise pitching of the maxilla led to a significant volume increase in the lip. Cranial translation of the maxilla led to an increase in the alar width. The combination of CBCT DICOM data and 3D stereophotogrammetry proved to be useful in the 3D analysis of the maxillary hard tissue changes, as well as changes in the soft tissues. Measurements could be acquired and compared to investigate the influence of maxillary movement on the soft tissues of the nose and the upper lip.

An Accuracy Study of Computer-Planned Implant Placement in the Augmented Maxilla Using Mucosa-Supported Surgical Templates

PURPOSE

The purpose of this study was to determine the clinically relevant accuracy of implant placement in the augmented maxilla using computer planning and a mucosa-supported surgical template.

MATERIALS AND METHODS

Twenty-five consecutive edentulous patients with an extreme maxillar alveolar ridge resorption were treated with a bone augmentation procedure. In a second stage, six Brånemark MkIII Groovy (Nobel Biocare®, Zürich, Switzerland) implants were installed. Preoperatively, a cone beam computer tomography (CBCT) scan was acquired, followed by virtual implant planning and flapless implant placement using a surgical template. A postoperative CBCT scan was acquired and registered to the preoperative scan. The Implant Position Orthogonal Projection validation method was applied to measure implant deviations in both the buccolingual and mesio-distal plane. The influence of fixation pins and the position on the dental arch were investigated with regard to implant deviations, and rotations and translations of the surgical template.

RESULTS

One hundred fifty implants were installed. In mesio-distal direction, a mean implant deviation of 1.50 mm was scored at the implant tip, 1.27 mm at the shoulder, -0.60 mm in depth, as well as a mean deviation of angulation of 2.50°. In buccolingual direction, a mean implant deviation of 0.99 mm was found at the implant tip, 0.76 mm at the implant shoulder, -0.57 mm in depth, and a deviation of angulation of 2.48°. Of all implants, 53% was placed too superficial compared with the planning. The use of fixation pins and implant deviations in both buccal and mesial directions as also for rotations and translation of the surgical template showed statistically significant differences.

CONCLUSIONS

Computer-aided implant planning showed to be a clinically relevant tool. However, this study emphasizes that the surgeon should take into account that deviations are larger compared with implant placement without augmentation procedure. Deviations are mainly caused by angulations and translations of the surgical template.

Prenatal diagnosis of craniomaxillofacial malformations: a characterization of phenotypes in trisomies 13, 18, and 21 by ultrasound and pathology

OBJECTIVE

To determine the relationship between trisomies 13, 18, and 21 and craniofacial malformations detected by prenatal sonography.

DESIGN

During a 29-year period (1976 through 2004), prenatal sonographic findings of 69 fetuses with trisomy 13; 171 fetuses with trisomy 18; 302 fetuses with trisomy 21; and 17 fetuses with other trisomies were evaluated retrospectively, after fetal karyotype identification. Sonographic findings were compared with autopsy results in 209 patients (trisomy 13, n=39; trisomy 18, n=64; and trisomy 21, n=106).

RESULTS

For trisomy 13, cleft deformities were detected prenatally in 65.2%, and of the 39 cases with pathological information, 76.9% were found to have a cleft deformity. Ocular and orbital abnormalities were found in 28%. Malformations of the jaws and abnormal profiles were more frequently diagnosed postnatally than prenatally. For trisomy 18, abnormal profiles (41.5%) and ear abnormalities (5.3%) were the most noticeable ultrasound markers, next to abnormalities of the neurocranium (36.8%) and cranial bone configuration (21.6%). Dysmorphisms of the eye, ear, or nose were detected more frequently in autopsy cases. For trisomy 21, ultrasound showed an aberrant shape of the skull in 14.2% of fetuses. In general, the ocular-orbital and nasal abnormalities in fetuses with trisomy 18 or 21 were more evident in pathological examination than in prenatal ultrasound imaging.

CONCLUSIONS

Facial anomalies are common in the major trisomies, and their prenatal sonographic identification should be improved. The above-mentioned facial anomalies provide sufficient reason to consider performing cytogenic evaluation.

Prenatal diagnosis of craniomaxillofacial malformations: a characterization of phenotypes in trisomies 13, 18, and 21 by ultrasound and pathology

OBJECTIVE

To determine the relationship between trisomies 13, 18, and 21 and craniofacial malformations detected by prenatal sonography.

DESIGN

During a 29-year period (1976 through 2004), prenatal sonographic findings of 69 fetuses with trisomy 13; 171 fetuses with trisomy 18; 302 fetuses with trisomy 21; and 17 fetuses with other trisomies were evaluated retrospectively, after fetal karyotype identification. Sonographic findings were compared with autopsy results in 209 patients (trisomy 13, n=39; trisomy 18, n=64; and trisomy 21, n=106).

RESULTS

For trisomy 13, cleft deformities were detected prenatally in 65.2%, and of the 39 cases with pathological information, 76.9% were found to have a cleft deformity. Ocular and orbital abnormalities were found in 28%. Malformations of the jaws and abnormal profiles were more frequently diagnosed postnatally than prenatally. For trisomy 18, abnormal profiles (41.5%) and ear abnormalities (5.3%) were the most noticeable ultrasound markers, next to abnormalities of the neurocranium (36.8%) and cranial bone configuration (21.6%). Dysmorphisms of the eye, ear, or nose were detected more frequently in autopsy cases. For trisomy 21, ultrasound showed an aberrant shape of the skull in 14.2% of fetuses. In general, the ocular-orbital and nasal abnormalities in fetuses with trisomy 18 or 21 were more evident in pathological examination than in prenatal ultrasound imaging.

CONCLUSIONS

Facial anomalies are common in the major trisomies, and their prenatal sonographic identification should be improved. The above-mentioned facial anomalies provide sufficient reason to consider performing cytogenic evaluation.

Prenatal diagnosis of craniomaxillofacial malformations: a characterization of phenotypes in trisomies 13, 18, and 21 by ultrasound and pathology

OBJECTIVE

To determine the relationship between trisomies 13, 18, and 21 and craniofacial malformations detected by prenatal sonography.

DESIGN

During a 29-year period (1976 through 2004), prenatal sonographic findings of 69 fetuses with trisomy 13; 171 fetuses with trisomy 18; 302 fetuses with trisomy 21; and 17 fetuses with other trisomies were evaluated retrospectively, after fetal karyotype identification. Sonographic findings were compared with autopsy results in 209 patients (trisomy 13, n=39; trisomy 18, n=64; and trisomy 21, n=106).

RESULTS

For trisomy 13, cleft deformities were detected prenatally in 65.2%, and of the 39 cases with pathological information, 76.9% were found to have a cleft deformity. Ocular and orbital abnormalities were found in 28%. Malformations of the jaws and abnormal profiles were more frequently diagnosed postnatally than prenatally. For trisomy 18, abnormal profiles (41.5%) and ear abnormalities (5.3%) were the most noticeable ultrasound markers, next to abnormalities of the neurocranium (36.8%) and cranial bone configuration (21.6%). Dysmorphisms of the eye, ear, or nose were detected more frequently in autopsy cases. For trisomy 21, ultrasound showed an aberrant shape of the skull in 14.2% of fetuses. In general, the ocular-orbital and nasal abnormalities in fetuses with trisomy 18 or 21 were more evident in pathological examination than in prenatal ultrasound imaging.

CONCLUSIONS

Facial anomalies are common in the major trisomies, and their prenatal sonographic identification should be improved. The above-mentioned facial anomalies provide sufficient reason to consider performing cytogenic evaluation.

Three-dimensional stereophotogrammetry: a novel method in volumetric measurement of infantile hemangioma

Accurate and objective measurement of volume changes in infantile hemangiomas (IHs) is essential in routine clinical practice and clinical studies, particularly in the changing therapeutic landscape after the discovery of propranolol. Several bedside techniques for volume measurement have been described in the literature, but an objective method of measurement of this variable, dynamic vascular tumor is lacking. Three-dimensional (3D) phototechnology with data analysis is an up-and-coming technique in the objective measurement of facial volume changes. In this pilot study, the usability and clinical relevance of two methods of 3D stereophotogrammetry in the volume measurement of IH were explored.

A clinically relevant accuracy study of computer-planned implant placement in the edentulous maxilla using mucosa-supported surgical templates

PURPOSE

The purpose of the study is to determine the clinically relevant accuracy of implant placement in the edentulous maxilla using computer planning and a mucosa-supported surgical template.

MATERIALS AND METHODS

In each of in total 30 consecutive edentulous patients suffering from retention problems of their upper denture, two or four Brånemark MkIII Groovy (Nobel Biocare®, Zürich, Switzerland) implants in the maxilla were installed. Preoperatively, first, a cone-beam computer tomography (cone beam computer tomography) scan was acquired, followed by virtual implant planning. Hereafter, a surgical template was designed to allow flapless implant placement using the template as a guide. To inventory the accuracy of implant placement, a postoperative CBCT scan was obtained and matched to the preoperative scan. The accuracy of implant placement was validated three-dimensionally. The Implant Position Orthogonal Projection validation method was applied to measure the clinically relevant implant deviations (i.e., in both the bucco-lingual and mesio-distal plane). Also, the influence of type of surgery, use of fixation pins, and position on the dental arch were investigated with regard to implant deviations.

RESULTS

In total, 104 implants were installed. In bucco-lingual direction, a mean implant deviation of 0.67 mm was scored at the implant tip, of 0.51 mm at the shoulder, of -0.83 mm in depth, as also a mean deviation of angulation of 1.74°. In mesio-distal direction, a mean implant deviation of 0.75 mm was found at the implant tip, of 0.60 mm at the implant shoulder, of -0.75 mm in depth, and a deviation of angulation of 1.94°. Of all implants, 74% was placed not deep enough compared with the planning. Implant position on the dental arch, the use of fixation pins, and type of surgery showed no significant effect on implant deviations. However, a significant difference for implant deviations in both buccal and mesial direction was observed, explained by a nonoptimal positioning of the surgical template.

CONCLUSIONS

Computer-aided implant planning showed to be a clinically relevant tool for the placement of two or four implants in the maxilla of fully edentulous patients. Exact positioning of the surgical template in anterior/posterior direction is crucial in reducing implant deviations both in buccal and mesial direction.

Validation of cephalic index measurements in scaphocephaly

INTRODUCTION

The cephalic index (CI) of the head can be measured manually using a caliper, the original technique, but it is also possible to determine it using skull X-ray, 2DCT and 3DCT images, 3D photo and with help of plagiocephalometry (PCM).

PATIENTS AND METHODS

In this study, the manual caliper determination is statistically compared with other measuring methods for scaphocephaly patients (n = 39).

RESULTS

The CI mean differences for the most representative data are sequentially 3.74, 2.16, 1.09 and 0.97 for the 2DCT, PCM, 3D photo and 3DCT techniques. The CI 2DCT values show a significant difference (p < 0.01) in reference to CI manually, while the other techniques show a p > 0.05.

CONCLUSION

The conclusions are that significantly different results are achieved when using 2DCT relative to the manual caliper determination. No significant difference is observed between the 3D techniques and the manual method.

Unilateral condylar hyperplasia: a 3-dimensional quantification of asymmetry

Purpose

Objective quantifications of facial asymmetry in patients with Unilateral Condylar Hyperplasia (UCH) have not yet been described in literature. The aim of this study was to objectively quantify soft-tissue asymmetry in patients with UCH and to compare the findings with a control group using a new method.

Material and Methods

Thirty 3D photographs of patients diagnosed with UCH were compared with 30 3D photographs of healthy controls. As UCH presents particularly in the mandible, a new method was used to isolate the lower part of the face to evaluate asymmetry of this part separately. The new method was validated by two observers using 3D photographs of five patients and five controls.

Results

A significant difference (0.79 mm) between patients and controls whole face asymmetry was found. Intra- and inter-observer differences of 0.011 mm (−0.034–0.011) and 0.017 mm (−0.007–0.042) respectively were found. These differences are irrelevant in clinical practice.

Conclusion

After objective quantification, a significant difference was identified in soft-tissue asymmetry between patients with UCH and controls. The method used to isolate mandibular asymmetry was found to be valid and a suitable tool to evaluate facial asymmetry.

Accuracy and reliability of a novel method for fusion of digital dental casts and Cone Beam Computed Tomography scans

Several methods have been proposed to integrate digital models into Cone Beam Computed Tomography scans. Since all these methods have some drawbacks such as radiation exposure, soft tissue deformation and time-consuming digital handling processes, we propose a new method to integrate digital dental casts into Cone Beam Computed Tomography scans. Plaster casts of 10 patients were randomly selected and 5 titanium markers were glued to the upper and lower plaster cast. The plaster models were scanned, impressions were taken from the plaster models and the impressions were also scanned. Linear measurements were performed on all three models, to assess accuracy and reproducibility. Besides that, matching of the scanned plaster models and scanned impressions was done, to assess the accuracy of the matching procedure. Results show that all measurement errors are smaller than 0.2 mm, and that 81% is smaller than 0.1 mm. Matching of the scanned plaster casts and scanned impressions show a mean error between the two surfaces of the upper arch of 0.14 mm and for the lower arch of 0.18 mm. The time needed for reconstructing the CBCT scans to a digital patient, where the impressions are integrated into the CBCT scan of the patient takes about 15 minutes, with little variance between patients. In conclusion, we can state that this new method is a reliable method to integrate digital dental casts into CBCT scans. As far as radiation exposure, soft tissue deformation and digital handling processes are concerned, it is a significant improvement compared to the previously published methods.

Integration of digital dental casts in cone-beam computed tomography scans

Cone-beam computed tomography (CBCT) is widely used in maxillofacial surgery. The CBCT image of the dental arches, however, is of insufficient quality to use in digital planning of orthognathic surgery. Several authors have described methods to integrate digital dental casts into CBCT scans, but all reported methods have drawbacks. The aim of this feasibility study is to present a new simplified method to integrate digital dental casts into CBCT scans. In a patient scheduled for orthognathic surgery, titanium markers were glued to the gingiva. Next, a CBCT scan and dental impressions were made. During the impression-taking procedure, the titanium markers were transferred to the impression. The impressions were scanned, and all CBCT datasets were exported in DICOM format. The two datasets were matched, and the dentition derived from the scanned impressions was transferred to the CBCT of the patient. After matching the two datasets, the average distance between the corresponding markers was 0.1 mm. This novel method allows for the integration of digital dental casts into CBCT scans, overcoming problems such as unwanted extra radiation exposure, distortion of soft tissues due to the use of bite jigs, and time-consuming digital data handling.

Three dimensional evaluation of facial asymmetry after mandibular reconstruction: validation of a new method using stereophotogrammetry

The scientific literature is sparse on reports that evaluate facial asymmetry after mandibular reconstructive surgery objectively. The aim of this study is to introduce and validate a new method, using three dimensional (3D) stereophotogrammetry, that quantifies soft-tissue facial asymmetry in patients who have undergone mandibular reconstruction. To validate the new method, two observers applied the method on 3D photographs of five patients and five controls. An inter-observer difference of 0.04 mm (-0.08 to 0.17) was found with a measurement error of 0.13 mm. 15 3D photographs of the mandibular reconstructed patients were compared with 24 3D photographs of healthy controls. A significant difference (1.19 mm) in asymmetry was found between patients and controls. It is concluded that this new measuring method is a valid, fast and clinically applicable technique to quantify soft-tissue facial asymmetry. It is concluded that facial symmetry in patients is not restored to the level of the control group with the mandibular reconstruction method applied.

A clinically relevant validation method for implant placement after virtual planning

PURPOSE

To design a relevant method to compare the virtual planned implant position to the ultimately achieved implant position and to evaluate, in case of discrepancy, the cause for this.

MATERIALS AND METHODS

Five consecutive edentulous patients with retention problems of the upper denture received four implants in the maxilla. Preoperatively, first a cone-beam CT (CBCT) scan was acquired, followed by virtual implant planning. Then, a surgical template was designed and endosseous implants were flapless installed using the template as a guide. To inventory any differences in position, the postoperative CBCT scan was matched to the preoperative scan. The accuracy of implant placement was validated three-dimensionally (3D) and the Implant Position Orthogonal Projection (IPOP) validation method was applied to project the results to a bucco-lingual and mesio-distal plane. Subsequently, errors introduced by virtual planning, surgical instruments, and validation process were evaluated.

RESULTS

The bucco-lingual deviations were less obvious than mesio-distal deviations. A maximum linear tip deviation of 2.84 mm, shoulder deviation of 2.42 mm, and angular deviation of 3.41° were calculated in mesio-distal direction. Deviations included errors in planning software (maximum 0.15 mm), for surgical procedure (maximum 2.94°), and validation process (maximum 0.10 mm).

CONCLUSIONS

This study provides the IPOP validation method as an accurate method to evaluate implant positions and to elucidate inaccuracies in virtual implant planning systems.

Methods to quantify soft-tissue based facial growth and treatment outcomes in children: a systematic review

Context

Technological advancements have led craniofacial researchers and clinicians into the era of three-dimensional digital imaging for quantitative evaluation of craniofacial growth and treatment outcomes.

Objective

To give an overview of soft-tissue based methods for quantitative longitudinal assessment of facial dimensions in children until six years of age and to assess the reliability of these methods in studies with good methodological quality.

Data Source

PubMed, EMBASE, Cochrane Library, Web of Science, Scopus and CINAHL were searched. A hand search was performed to check for additional relevant studies.

Study Selection

Primary publications on facial growth and treatment outcomes in children younger than six years of age were included.

Data Extraction

Independent data extraction by two observers. A quality assessment instrument was used to determine the methodological quality. Methods, used in studies with good methodological quality, were assessed for reliability expressed as the magnitude of the measurement error and the correlation coefficient between repeated measurements.

Results

In total, 47 studies were included describing 4 methods: 2D x-ray cephalometry; 2D photography; anthropometry; 3D imaging techniques (surface laser scanning, stereophotogrammetry and cone beam computed tomography). In general the measurement error was below 1 mm and 1° and correlation coefficients range from 0.65 to 1.0.

Conclusion

Various methods have shown to be reliable. However, at present stereophotogrammetry seems to be the best 3D method for quantitative longitudinal assessment of facial dimensions in children until six years of age due to its millisecond fast image capture, archival capabilities, high resolution and no exposure to ionizing radiation.

3D stereophotogrammetric analysis of lip and nasal symmetry after primary cheiloseptoplasty in complete unilateral cleft lip repair

BACKGROUND

The aim of this study was to evaluate symmetry of the lip and nose in patients with CUCLP after primary cheiloseptoplasty (Afroze technique), in comparison to non-cleft controls.

METHODOLOGY

In this prospective study, forty-four patients with operated non-syndromic CUCLP were included. The control group consisted of 44 volunteers without cleft defects of approximately the same age and sex. Primary septoplasty was performed in conjunction with the cleft lip (CL) repair using the Afroze incision. 3D facial images were acquired using 3D stereophotogrammetry. After a 3D cephalometric analysis of the lip and nose was performed in both groups, linear and volumetric data were acquired. Lip and nose symmetry were calculated and compared using Student`s t-tests as well as the Chi square test.

RESULTS

For all measurements, the control group was up to 36% closer to perfect symmetry compared to the CUCLP group after primary surgery. This difference was statistically significant.

CONCLUSIONS

After primary cheiloseptoplasty according to the Afroze technique in patients with CUCLP, asymmetry in the nose and lip area still exists as compared to non-cleft controls. Although non-cleft individuals also show some degree of asymmetry, the results of this study stress the difficulty in obtaining near normal symmetrical relations.

Cephalometric outcome of two types of palatoplasty in complete unilateral cleft lip and palate

In complete unilateral cleft lip and palate (CLP), a vomerplasty is assumed to improve midfacial growth because of the reduction in scarring in the growth-sensitive areas of the palate. Our aim, therefore, was to evaluate maxillofacial morphology after a modified Langenbeck technique or a vomerplasty in children with complete unilateral CLP who were operated on by a single surgeon. As part of a one-stage closure of complete unilateral CLP done during the first year of life, the technique for repair of the hard palate repair differed between the two groups. In the modified group (n=37, mean age 11 years) a modified von Langenbeck technique was used that resulted in denudation of the bony surface on the non-cleft side only. In the vomerplasty group (n=37, mean age 11 years) a vomerplasty was used to cover the palatal bone. Lateral cephalograms from both groups were compared using the Eurocleft protocol. Fourteen angular variables were measured and 2 ratios calculated. Skeletal morphology in the groups was comparable. Maxillary incisor inclination (ILs/NL angle) and interincisal angle (ILs/ILi) were better after vomerplasty (p=0.001 and 0.04, respectively) but soft tissue facial convexity (gs-prn-pgs) was less good after vomerplasty (p=0.009). However, there was no difference between the groups in the other variable that reflected facial convexity (gs-sn-pgs) (p=0.22). Modification of the palatoplasty had a limited effect on skeletal morphology in preadolescent children, but it resulted in better inclination of the maxillary incisors.

[Sclerosis of lymfangiomas in the head and neck area: evaluation with the use of stereophotogrammetry]

Lymangiomas are congenital malformations of the lymphatic system. They can appear at any age and in any part of the body. In the head and neck area lymangiomas can give rise to functional as well as esthetic problems. Therapy consist of sclerosis, possibly followed by surgical excision. Stereophotogrammetry is a relatively new technique which, by means of superimposition of pre- and postoperative images, provides the possibility to quantify treatment results. In this paper 3 patients who underwent treatment of a lymphatic malformation and in whom treatment results were measured with stereophotogrammetry are discussed. The conclusion can be drawn that stereophotogrammetry is a promising technique for evaluation of treatment results of superficially localised lymphatic malformations that displace the skin in the head and neck area.

3D stereophotogrammetric analysis of lip and nasal symmetry after primary cheiloseptoplasty in complete unilateral cleft lip repair

BACKGROUND

The aim of this study was to evaluate symmetry of the lip and nose in patients with CUCLP after primary cheiloseptoplasty (Afroze technique), in comparison to non-cleft controls.

METHODOLOGY

In this prospective study, forty-four patients with operated non-syndromic CUCLP were included. The control group consisted of 44 volunteers without cleft defects of approximately the same age and sex. Primary septoplasty was performed in conjunction with the cleft lip (CL) repair using the Afroze incision. 3D facial images were acquired using 3D stereophotogrammetry. After a 3D cephalometric analysis of the lip and nose was performed in both groups, linear and volumetric data were acquired. Lip and nose symmetry were calculated and compared using Student`s t-tests as well as the Chi square test.

RESULTS

For all measurements, the control group was up to 36% closer to perfect symmetry compared to the CUCLP group after primary surgery. This difference was statistically significant.

CONCLUSIONS

After primary cheiloseptoplasty according to the Afroze technique in patients with CUCLP, asymmetry in the nose and lip area still exists as compared to non-cleft controls. Although non-cleft individuals also show some degree of asymmetry, the results of this study stress the difficulty in obtaining near normal symmetrical relations.

Incidence of cleft Lip and palate in the state of Andhra Pradesh, South India

Objective:

To assess the incidence of cleft lip and palate defects in the state of Andhra Pradesh, India.

Design Setting:

The study was conducted in 2001 in the state of Andhra Pradesh, India. The state has a population of 76 million. Three districts, Cuddapah, Medak and Krishna, were identified for this study owing to their diversity. They were urban, semi-urban and rural, respectively. Literacy rates and consanguinity of the parents was elicited and was compared to national averages to find correlations to cleft births. Type and side of cleft were recorded to compare with other studies around the world and other parts of India.

Results:

The birth rate of clefts was found to be 1.09 for every 1000 live births. This study found that 65% of the children born with clefts were males. The distribution of the type of cleft showed 33% had CL, 64% had CLP, 2% had CP and 1% had rare craniofacial clefts. Unilateral cleft lips were found in 79% of the patients. Of the unilateral cleft lips 64% were left sided. There was a significant correlation of children with clefts being born to parents who shared a consanguineous relationship and those who were illiterate with the odds ratio between 5.25 and 7.21 for consanguinity and between 1.55 and 5.85 for illiteracy, respectively.

Conclusion:

The birth rate of clefts was found to be comparable with other Asian studies, but lower than found in other studies in Caucasian populations and higher than in African populations. The incidence was found to be similar to other studies done in other parts of India. The distribution over the various types of cleft was comparable to that found in other studies.