A Task-Specific Algorithm to Estimate Occupational (1→3)-β-D-glucan Exposure for Farmers in the Biomarkers of Exposure and Effect in Agriculture Study

OBJECTIVES

Farmers may be exposed to glucans (a cell component of molds) through a variety of tasks. The magnitude of exposure depends on each farmer's activities and their duration. We developed a task-specific algorithm to estimate glucan exposure that combines measurements of (1→3)-β-D-glucan with questionnaire responses from farmers in the Biomarkers of Exposure and Effect in Agriculture (BEEA) study.

METHODS

To develop the algorithm, we first derived task-based geometric means (GMs) of glucan exposure for farming tasks using inhalable personal air sampling data from a prior air monitoring study in a subset of 32 BEEA farmers. Next, these task-specific GMs were multiplied by subject-reported activity frequencies for three time windows (the past 30 days, past 7 days, and past 1 day) to obtain subject-, task-, and time window-specific glucan scores. These were summed together to obtain a total glucan score for each subject and time window. We examined the within- and between-task correlation in glucan scores for different time frames. Additionally, we assessed the algorithm for the 'past 1 day' time window using full-shift concentrations from the 32 farmers who participated in air monitoring the day prior to an interview using multilevel statistical models to compare the measured glucan concentration with algorithm glucan scores.

RESULTS

We focused on the five highest exposed tasks: poultry confinement (300 ng/m3), swine confinement (300 ng/m3), clean grain bins (200 ng/m3), grind feed (100 ng/m3), and stored seed or grain (50 ng/m3); the remaining tasks were <50 ng/m3 and had similar concentrations to each other. Overall, 67% of the participants reported at least one of these tasks. The most prevalent task was stored seed or grain (64%). The highest median glucan scores were observed for poultry confinement and swine confinement; these tasks were reported by 2% and 8% of the participants, respectively. The correlation between scores for the same task but different time windows was high for swine confinement and poultry confinement, but low for clean grain bins. Task-specific scores had low correlation with other tasks. Prior day glucan concentration was associated with the total glucan 'past 1 day' score and with swine confinement and clean grain bin task scores.

CONCLUSIONS

This study provides insight into the variability and key sources of glucan exposure in a US farming population. It also provides a framework for better glucan exposure assessment in epidemiologic studies and is a crucial starting point for evaluating health risks associated with glucans in future epidemiologic evaluations of this population.

Evaluation of Environmental Sample Analysis Methods and Results Reporting in the National Children's Study Vanguard Study

During the initial Vanguard phase of the U.S. National Children's Study (NCS), about 2000 tap water, surface wipe, and air samples were collected and analyzed immediately. The shipping conditions, analysis methods, results, and laboratory performance were evaluated to determine the best approaches for use in the NCS Main Study. The main conclusions were (1) to employ established sample analysis methods, when possible, and alternate methodologies only after careful consideration with method validation studies; (2) lot control and prescreening sample collection materials are important quality assurance procedures; (3) packing samples correctly requires careful training and adjustment of shipping conditions to local conditions; (4) trip blanks and spiked samples should be considered for samplers with short expiration times and labile analytes; (5) two study-specific results reports should be required: laboratory electronic data deliverables (EDD) of sample results in a useable electronic format (CSV or SEDD XML/CSV) and a data package with sample results and supporting information in PDF format. These experiences and lessons learned can be applied to any long-term study.

Assessment of Exposure to VOCs among Pregnant Women in the National Children's Study

Epidemiologic studies can measure exposure to volatile organic compounds (VOCs) using environmental samples, biomarkers, questionnaires, or observations. These different exposure assessment approaches each have advantages and disadvantages; thus, evaluating relationships is an important consideration. In the National Children's Vanguard Study from 2009 to 2010, participants completed questionnaires and data collectors observed VOC exposure sources and collected urine samples from 488 third trimester pregnant women at in-person study visits. From urine, we simultaneously quantified 28 VOC metabolites of exposure to acrolein, acrylamide, acrylonitrile, benzene, 1-bromopropane, 1,3-butadiene, carbon disulfide, crotonaldehyde, cyanide, N,N-dimethylformamide, ethylbenzene, ethylene oxide, propylene oxide, styrene, tetrachloroethylene, toluene, trichloroethylene, vinyl chloride, and xylene exposures using ultra high performance liquid chromatography coupled with an electrospray ionization tandem mass spectrometry (UPLC-ESI/MSMS) method. Urinary thiocyanate was measured using an ion chromatography coupled with an electrospray ionization tandem mass spectrometry method (IC-ESI/MSMS). We modeled the relationship between urinary VOC metabolite concentrations and sources of VOC exposure. Sources of exposure were assessed by participant report via questionnaire (use of air fresheners, aerosols, paint or varnish, organic solvents, and passive/active smoking) and by observations by a trained data collector (presence of scented products in homes). We found several significant (p < 0.01) relationships between the urinary metabolites of VOCs and sources of VOC exposure. Smoking was positively associated with metabolites of the tobacco constituents acrolein, acrylamide, acrylonitrile, 1,3-butadiene, crotonaldehyde, cyanide, ethylene oxide, N,N-dimethylformamide, propylene oxide, styrene, and xylene. Study location was negatively associated with the toluene metabolite N-acetyl-S-(benzyl)-L-cysteine (BMA), and paint use was positively associated with the xylene metabolites 2-methylhippuric acid (2MHA) and 3-Methylhippuric acid & 4-methylhippuric acid (3MHA + 4MHA). A near-significant (p = 0.06) relationship was observed between acrylamide metabolites and observation of incense.

Prevalence of Lead Hazards and Soil Arsenic in U.S. Housing

The American Healthy Homes Survey, June 2005-March 2006, measured levels of lead and arsenic in homes nationwide. Based on a three-stage cluster sample of 1,131 housing units, key statistically weighted estimates of the prevalence of lead-based paint (LBP) and LBP hazards associated with paint, dust, and soil, and arsenic in dust and soil, were as follows: 37.1 million homes (35%) had some LBP; 23.2 million (22%) had one or more LBP hazards; 93% of the homes with LBP were built before 1978. The highest prevalence of LBP and LBP hazards was in the Northeast and Midwest. Over three million homes with children under six years of age had LBP hazards, including 1.1 million low-income households (< $30,000/yr.). Less than 5% of homes had detectable levels of arsenic in dust (≥ 5 μg/ft2). Arsenic in soil (for homes with yard soil) averaged 6.6 parts per million (ppm). Many homes had soil arsenic levels of 20 ppm or greater, including 16% of homes with wooden structures in the yard and 8% of homes without such structures.

Coronary artery disease and cancer mortality in a cohort of workers exposed to vinyl chloride, carbon disulfide, rotating shift work, and o-toluidine at a chemical manufacturing plant

BACKGROUND

We updated through 2007 the mortality experience of 1,874 workers employed at a New York State chemical manufacturing plant between 1946 and 2006.

METHODS

Reassessed exposures to vinyl chloride, carbon disulfide, and shift work and categories of o-toluidine exposure were based on year, department and job title. Standardized mortality ratios (SMR) compared mortality to that of the US population. Internal comparisons used directly standardized rate ratios.

RESULTS

Hepatobiliary cancer mortality was elevated among workers ever exposed to vinyl chloride (SMR = 3.80, 95% confidence interval 1.89-6.80); directly standardized rates increased with increasing vinyl chloride exposure duration. No increase in non-Hodgkin lymphoma mortality was observed with vinyl chloride and shift work exposures. Internal comparisons showed increased coronary artery disease mortality among long-term workers exposed to carbon disulfide and shift work for 4 years or more.

CONCLUSIONS

Excess coronary artery disease mortality confirms earlier results; further investigation is needed to understand risk factors.

Bladder cancer incidence among workers exposed to o-toluidine, aniline and nitrobenzene at a rubber chemical manufacturing plant

BACKGROUND

An earlier investigation found increased bladder cancer incidence among workers at a rubber chemical manufacturing plant that used o-toluidine, aniline and nitrobenzene. The cohort was expanded to include additional workers (n=1875) and updated through 2007 to assess bladder cancer with improved exposure characterisation.

METHODS

Work histories were updated and exposure categories and ranks were developed for o-toluidine, aniline and nitrobenzene combined. Incident cancers were identified by linkage to six state cancer registries. Residency in time-dependent cancer registry catchment areas was determined. SIR and standardised rate ratios for bladder cancer were calculated by exposure category and cumulative rank quartiles for different lag periods. Cox regression was used to model bladder cancer incidence with estimated cumulative rank, adjusting for confounders. Indirect methods were used to control for smoking.

RESULTS

Excess bladder cancer was observed compared to the New York State population (SIR=2.87, 95% CI 2.02 to 3.96), with higher elevations among workers definitely exposed (moderate/high) (SIR=3.90, 95% CI 2.57 to 5.68), and in the highest cumulative rank quartile (SIR=6.13, 95% CI 2.80 to 11.6, 10-year lag). Bladder cancer rates increased significantly with estimated cumulative rank (10-year lag). Smoking only accounted for an estimated 8% elevation in bladder cancer incidence.

CONCLUSIONS

Bladder cancer incidence remains elevated in this cohort and significantly associated with estimated cumulative exposure. Results are consistent with earlier findings in this and other cohorts. Despite other concurrent chemical exposures, we consider o-toluidine most likely responsible for the bladder cancer incidence elevation and recommend a re-examination of occupational exposure limits.

Exposure to o-toluidine, aniline, and nitrobenzene in a rubber chemical manufacturing plant: a retrospective exposure assessment update

The National Institute for Occupational Safety and Health previously conducted a retrospective cancer incidence and mortality study of workers employed at a rubber chemical manufacturing plant. Compared with New York State incidence, the bladder cancer risk was 6.5 times higher for workers considered to have definite exposure to ortho-toluidine and aniline, and 4 times higher for workers with possible exposure. Exposure characterization in the original study utilized a surrogate measure based only on departments in which each worker was ever employed. As part of an update of that study, some departments in the three original exposure groups were reclassified based on a follow-up site visit; interviews with employees, management, and union representatives; and review of records including exposure data. An additional evaluation of department-job combinations, rather than only departments, was used to stratify exposure into four categories. An approximate rank of "relative" exposure level for each department-job-year combination was also assigned using a ranking scale of 0 to 10. The ranks were supported by quantitative exposure levels and by professional judgment. The numerical ranking scale was applied to each worker by multiplying the exposure rank by duration for each job held based on comprehensive individual work histories. The cumulative rank scores for this cohort ranged from 0 to 300 unit-years. The medians of the cumulative rank scores for the exposure categories showed very good agreement with increasing exposure classifications (e.g., 0.72, 4.6, 11, 14 unit-years for the four exposure categories). Workers' breathing zone air sampling data collected at this plant from 1976-2004 were well below published occupational exposure limits for these chemicals, but additional cases of bladder cancer have been reported. The exposure assessment revisions and rank estimates will be used to analyze the updated bladder cancer incidence data.

Comparison of wipe materials and wetting agents for pesticide residue collection from hard surfaces

Different wipe materials and wetting agents have been used to collect pesticide residues from surfaces, but little is known about their comparability. To inform the selection of a wipe for the National Children's Study, the analytical feasibility, collection efficiency, and precision of Twillwipes wetted with isopropanol (TI), Ghost Wipes (GW), and Twillwipes wetted with water (TW), were evaluated. Wipe samples were collected from stainless steel surfaces spiked with high and low concentrations of 27 insecticides, including organochlorines, organophosphates, and pyrethroids. Samples were analyzed by GC/MS/SIM. No analytical interferences were observed for any of the wipes. The mean percent collection efficiencies across all pesticides for the TI, GW, and TW were 69.3%, 31.1%, and 10.3% at the high concentration, respectively, and 55.6%, 22.5%, and 6.9% at the low concentration, respectively. The collection efficiencies of the TI were significantly greater than that of GW or TW (p<0.0001). Collection efficiency also differed significantly by pesticide (p<0.0001) and spike concentration (p<0.0001). The pooled coefficients of variation (CVs) of the collection efficiencies for the TI, GW, and TW at high concentration were 0.08, 0.17, and 0.24, respectively. The pooled CV of the collection efficiencies for the TI, GW, and TW at low concentration were 0.15, 0.19, and 0.36, respectively. The TI had significantly lower CVs than either of the other two wipes (p=0.0008). Though the TI was superior in terms of both accuracy and precision, it requires multiple preparation steps, which could lead to operational challenges in a large-scale study.

Feasibility of community food item collection for the National Children's Study

BACKGROUND

The National Children's Study proposes to investigate biological, chemical, physical, and psychosocial environmental exposures and their role on health outcomes in pregnant women and children. One specific area of concern is contaminant exposure through the ingestion of solid foods. National food contaminant databases may miss dietary exposures unique to specific communities and sources of food.

OBJECTIVE

The purpose of this study was to evaluate the feasibility of community food item collection for the assessment of pesticide exposure in pregnant women and young children.

METHODS

A prospective observational design was used to test the food collection protocol in mothers (n=45) of children aged 15-24 months in Salt Lake City, Utah. Foods for collection were based on: 1) frequency of different foods consumed by the target population as determined by the National Health and Nutrition Examination Survey data; 2) child food frequency questionnaire; and 3) likelihood of pesticide contamination in the foods. Assessment measures included: demographics, environmental health survey, quality assurance checklist, and participant evaluation form.

RESULTS

An average of three food items were obtained from 44 households, yielding a collection rate of 97.8%. Overall, 100% of the food samples were rated as acceptable. Moreover, a vast majority of mothers reported that the study was not burdensome (95.5%) and that preparing the food sample was easy (93.2%).

CONCLUSIONS

This study suggests that the community food item collection methodology shows promise as a low-burden approach for capturing dietary exposures on a household level, and appears to be a feasible tool for large population studies to assess dietary exposures unique to specific communities.

Bloodborne pathogen risk reduction activities in the body piercing and tattooing industry

BACKGROUND

This study examines how well regulations for bloodborne pathogens (BBPs), established primarily to reduce exposure risk for health care workers, are being followed by workers and employers in the tattooing and body piercing industry.

METHOD

Twelve shops performing tattooing and/or body piercing (body art) in Pennsylvania and Texas were assessed for compliance with 5 administrative and 10 infection control standards for reducing exposure to BBPs.

RESULTS

All shops demonstrated compliance with infection control standards, but not with administrative standards, such as maintaining an exposure control plan, offering hepatitis B vaccine, and training staff. Shops staffed with members of professional body art organizations demonstrated higher compliance with the administrative standards. Shops in locations where the body art industry was regulated and shops in nonregulated locations demonstrated similar compliance, as did contractor- and employee-staffed shops.

CONCLUSIONS

Regulations to control occupational exposure to BBPs have been in place since 1991. This study corroborates noncompliance with some standards within the body art industry reported by previous studies. Without notable enforcement, regulation at national, state, or local levels does not affect compliance. In this study, the factor most closely associated with compliance with administrative regulations was the artist's membership in a professional body art association.

The prevalence of lead-based paint hazards in U.S. housing

In this study we estimated the number of housing units in the United States with lead-based paint and lead-based paint hazards. We included measurements of lead in intact and deteriorated paint, interior dust, and bare soil. A nationally representative, random sample of 831 housing units was evaluated in a survey between 1998 and 2000; the units and their occupants did not differ significantly from nationwide characteristics. Results indicate that 38 million housing units had lead-based paint, down from the 1990 estimate of 64 million. Twenty-four million had significant lead-based paint hazards. Of those with hazards, 1.2 million units housed low-income families (< 30,000 US dollars/year) with children under 6 years of age. Although 17% of government-supported, low-income housing had hazards, 35% of all low-income housing had hazards. For households with incomes greater than or equal to 30,000 US dollars/year, 19% had hazards. Fourteen percent of all houses had significantly deteriorated lead-based paint, and 16% and 7%, respectively, had dust lead and soil lead levels above current standards of the U.S. Department of Housing and Urban Development and the U.S. Environmental Protection Agency. The prevalence of lead-based paint and hazards increases with age of housing, but most painted surfaces, even in older housing, do not have lead-based paint. Between 2% and 25% of painted building components were coated with lead-based paint. Housing in the Northeast and Midwest had about twice the prevalence of hazards compared with housing in the South and West. The greatest risk occurs in older units with lead-based paint hazards that either will be or are currently occupied by families with children under 6 years of age and are low-income and/or are undergoing renovation or maintenance that disturbs lead-based paint. This study also confirms projections made in 2000 by the President's Task Force on Environmental Health Risks and Safety Risks to Children of the number of houses with lead-based paint hazards. Public- and private-sector resources should be directed to units posing the greatest risk if future lead poisoning is to be prevented.

First National Survey of Lead and Allergens in Housing: survey design and methods for the allergen and endotoxin components

From July 1998 to August 1999, the U.S. Department of Housing and Urban Development and the National Institute of Environmental Health Sciences conducted the first National Survey of Lead and Allergens in Housing. The purpose of the survey was to assess children's potential household exposure to lead, allergens, and bacterial endotoxins. We surveyed a sample of 831 homes, representing 96 million permanently occupied, noninstitutional housing units that permit resident children. We administered questionnaires to household members, made home observations, and took environmental samples. This article provides general background information on the survey, an overview of the survey design, and a description of the data collection and laboratory methods pertaining to the allergen and endotoxin components. We collected dust samples from a bed, the bedroom floor, a sofa or chair, the living room floor, the kitchen floor, and a basement floor and analyzed them for cockroach allergen Bla g 1, the dust mite allergens Der f 1 and Der p 1, the cat allergen Fel d 1, the dog allergen Can f 1, the rodent allergens Rat n 1 and mouse urinary protein, allergens of the fungus Alternaria alternata, and endotoxin. This article provides the essential context for subsequent reports that will describe the prevalence of allergens and endotoxin in U.S. households, their distribution by various housing characteristics, and their associations with allergic diseases such as asthma and rhinitis.

Acute respiratory effects and endotoxin exposure during wheat harvest in Northeastern Colorado

Acute cross-shift respiratory changes were evaluated for workers at 25 farms in northeastern Colorado during the summer of 1994 wheat harvest. Information on workers' respiratory health, past occupational exposures, and smoking status was obtained. Each worker was asked to rank eight acute symptoms before he or she began harvest work for the day. Spirometry was also performed before work began. Each participant wore a high-flow personal air sampling pump for the full shift. At the end of the workshift, spirometry and ranking of the eight acute symptoms were conducted again. Total dust exposure was determined gravimetrically. Total endotoxin was measured by the Limulus amoebocyte lysate (LAL) assay. The 98 harvest workers included in the study ranged in age from 18 to 80. Ten percent of the workers had moderate airway obstruction, as indicated by the pre-shift spirometry test results. Fifty percent of the workers were current or ex-smokers. Despite an unusually poor harvest, total dust exposures ranged from 0.09 to 15.33 mg/m3 (geometric mean 0.83 mg/m3), with 8 percent of workers exposed above the American Conference of Government Industrial Hygienists (ACGIH) threshold limit value (TLV) of 4 mg/m3. Total endotoxin exposures ranged from 4.4 to 744.4 EU/m3 (geometric mean 54.2 EU/m3), with 33 percent of workers exposed above 90 EU/m3, the level suggested as a threshold for acute mucous membrane irritation and pulmonary change among cotton workers. Sixty percent of workers experienced a cross-shift change in at least one respiratory symptom. The respiratory index (sum of cross-shift changes in the eight acute respiratory symptoms) was significantly correlated with both total dust and endotoxin exposure. Cross-shift changes in the spirometric variables were associated with smoking status, age, presence of airway obstruction, and history of chronic respiratory symptoms, but not with dust or endotoxin exposure. Peak expiratory flow rate was found to decrease over the workshift in a manner similar to that experienced by cotton workers.

Chronic beryllium disease and beryllium sensitization at Rocky Flats: a case-control study

A case-control study was conducted to evaluate the risk of chronic beryllium disease (CBD) and beryllium sensitization (SENS) associated with various levels of historical beryllium exposure at the Rocky Flats nuclear weapons facility. Fifty CBD and 74 SENS cases were matched to controls of the same age group, race, gender, and smoking status. A job exposure matrix was developed from job history data and fixed airhead (FAH) exposure data available from 1960 to 1988. Job titles and building areas were assigned factors based on exposure relative to a machinist in the Building 444 Beryllium Shop. Concurrence on these factors was obtained from past and present Rocky Flats industrial hygienists. Using the matrix, long-term mean and cumulative exposures were estimated for each subject. Both exposure estimates (p < 0.0001) and years of employment (p = 0.010) were found to be significantly higher for CBD cases as compared with their controls, but not so for the SENS cases as compared with their controls. Logistic regression analyses showed statistically significant relationships between both cumulative and mean exposure and CBD, but not for SENS. These findings suggest that reduced worker exposures might lower the future incidence of CBD, but may not necessarily lower the incidence of SENS.

Retrospective beryllium exposure assessment at the Rocky Flats Environmental Technology Site

The purpose of this study was to determine how two types of sampling data could be used for an exposure assessment in a beryllium shop at the Department of Energy's Rocky Flats Plant. Beryllium exposure was assessed via fixed airhead (FAH) sampling, in which the filter cassette was affixed to the machine, generally within a few feet of the worker's breathing zone. Approximately 500,000 FAH samples were collected for beryllium over three decades at the site. From 1984 to 1987, personal breathing zone (PBZ) samples also were collected as part of the evaluation of a new high velocity/lcw volume local exhaust ventilation system in the beryllium shop. FAH data indicated that four statistically different exposure periods existed from 1970 to 1988, as the FAH annual arithmetic means varied with changes in the local exhaust ventilation system and production levels. A matched comparison between the FAH and PBZ sample data found no direct linear correlation (R2 = 0.014); however, the mean PBZ results were higher than the mean FAH results (p = 0.0001). The mean PBZ level was 1.04 micrograms/m3 while the FAH average was 0.16 microgram/m3 (permissible exposure limit for beryllium: 2 micrograms/m3). A health surveillance program to identify cases of chronic beryllium disease (CBD) and beryllium sensitization has been implemented at Rocky Flats. To date, 53 cases of CBD and 86 cases of sensitivity to beryllium have been diagnosed. Continuing studies are evaluating semiquantitative dose response relationships for CBD using the exposure data discussed herein.