Combination of soil organic and inorganic amendments helps plants overcome trace element induced oxidative stress and allows phytostabilisation

Trace element (TE)-contaminated soils require the improvement of their physico-chemical properties in order to allow their restoration through phytostabilization technologies. This study aimed to determine the usefulness of oxidative stress related parameters to validate the suitability of two different combinations of organic (solid fraction of pig slurry) and inorganic (paper mill sludge or a commercial red mud derivative) amendments for the phytostabilization of an acidic (4.2) TE-contaminated mine soil from SE Spain. Two wild species (Silybum marianum and Piptatherum miliaceum) were greenhouse cultivated and the development of the plants, their ionome, and oxidative stress related parameters were determined. Both amendment combinations increased significantly soil pH (to 5-6) and soil/pore water total organic C and total N concentrations, allowing an adequate plant growth and development (plants did not grow in untreated soils). The combination of amendments significantly reduced metal availability and showed to be effective (specially the one including the red mud derivative) in limiting shoot TE concentrations, which were all within common ranges (exclusion based tolerance of these species). Both protein carbonylation and lipid peroxidation were significantly higher in S. marianum plants from phytostabilized soils than in those from non-contaminated soils, which confirms the oxidative stress these plants suffer despite their satisfactory growth in the treated soils. P. miliaceum plants showed no differences between phytostabilized and non-contaminated soils. Therefore, the combination of amendments and TE-tolerant autochthonous species would be a suitable option for the phytostabilisation of soils contaminated by mining activities, reducing TE solubility and allowing an adequate plant growth.

Two New Fluorogenic Aptasensors Based on Capped Mesoporous Silica Nanoparticles to Detect Ochratoxin A

Aptamers have been used as recognition elements for several molecules due to their great affinity and selectivity. Additionally, mesoporous nanomaterials have demonstrated great potential in sensing applications. Based on these concepts, we report herein the use of two aptamer-capped mesoporous silica materials for the selective detection of ochratoxin A (OTA). A specific aptamer for OTA was used to block the pores of rhodamine B-loaded mesoporous silica nanoparticles. Two solids were prepared in which the aptamer capped the porous scaffolds by using a covalent or electrostatic approach. Whereas the prepared materials remained capped in water, dye delivery was selectively observed in the presence of OTA. The protocol showed excellent analytical performance in terms of sensitivity (limit of detection: 0.5-0.05 nm), reproducibility, and selectivity. Moreover, the aptasensors were tested for OTA detection in commercial foodstuff matrices, which demonstrated their potential applicability in real samples.

Phytostabilisation of severely contaminated mine tailings using halophytes and field addition of organic and inorganic amendments

Phytostabilisation strategies have proven to be an efficient remediation option for mine tailings, but the adequate plant species and amendments have to be carefully selected. A remediation experiment was carried out at the semi-field level in tailings (pH 3.2, ≈1100, 4700 and 5000 mg kg^-1 of As, Pb and Zn, respectively) from the mining district of La Unión-Cartagena (SE Spain). A red mud derivative (Fe/Al oxides), its combination with compost, and hydrated lime (Ca hydroxide) were applied in field plots of 0.25 m². After four months of field stabilisation, tailings were transferred unaltered to a plant growth facility, and Atriplex halimus and Zygophyllum fabago (halophytes) were sown. Three months later, trace element (TE) solubility, plant accumulation and chemical speciation in the tailings pore water were studied. In unamended tailings, soluble TEs concentrations were very high (e.g., 40 mg Zn l^-1), the dominant species being free ions and SO₄^2-- complexes (>70%). The addition of amendments increased tailings pH (6.7-7), reduced TEs solubility and extractability (>80-99%) and changed the dominant species of soluble Al, Cu, Pb and Zn to hydroxides and/or organo-metallic complexes, but increased slightly the extractable As and soluble Tl concentrations. Plants were able to grow only in amended tailings, and both species presented low levels of Al, As, Cd and Zn. Therefore, the use of combined red mud derivative and compost and halophytes was shown to be a good phytostabilisation strategy, although the dose applied must be carefully chosen in order to avoid possible solubilisation of As and Tl.

Molecular gated nanoporous anodic alumina for the detection of cocaine

We present herein the use of nanoporous anodic alumina (NAA) as a suitable support to implement "molecular gates" for sensing applications. In our design, a NAA support is loaded with a fluorescent reporter (rhodamine B) and functionalized with a short single-stranded DNA. Then pores are blocked by the subsequent hybridisation of a specific cocaine aptamer. The response of the gated material was studied in aqueous solution. In a typical experiment, the support was immersed in hybridisation buffer solution in the absence or presence of cocaine. At certain times, the release of rhodamine B from pore voids was measured by fluorescence spectroscopy. The capped NAA support showed poor cargo delivery, but presence of cocaine in the solution selectively induced rhodamine B release. By this simple procedure a limit of detection as low as 5 × 10-7 M was calculated for cocaine. The gated NAA was successfully applied to detect cocaine in saliva samples and the possible re-use of the nanostructures was assessed. Based on these results, we believe that NAA could be a suitable support to prepare optical gated probes with a synergic combination of the favourable features of selected gated sensing systems and NAA.

Polyglutamic Acid-Gated Mesoporous Silica Nanoparticles for Enzyme-Controlled Drug Delivery

Mesoporous silica nanoparticles (MSNs) are highly attractive as supports in the design of controlled delivery systems that can act as containers for the encapsulation of therapeutic agents, overcoming common issues such as poor water solubility and poor stability of some drugs and also enhancing their bioavailability. In this context, we describe herein the development of polyglutamic acid (PGA)-capped MSNs that can selectively deliver rhodamine B and doxorubicin. PGA-capped MSNs remain closed in an aqueous environment, yet they are able to deliver the cargo in the presence of pronase because of the hydrolysis of the peptide bonds in PGA. The prepared solids released less than 20% of the cargo in 1 day in water, whereas they were able to reach 90% of the maximum release of the entrapped guest in ca. 5 h in the presence of pronase. Studies of the PGA-capped nanoparticles with SK-BR-3 breast cancer cells were also undertaken. Rhodamine-loaded nanoparticles were not toxic, whereas doxorubicin-loaded nanoparticles were able to efficiently kill more than 90% of the cancer cells at a concentration of 100 μg/mL.

Efficiency of soil organic and inorganic amendments on the remediation of a contaminated mine soil: I. Effects on trace elements and nutrients solubility and leaching risk

A mesocosm experiment, in columns, was conducted in a growth chamber to assess the viability of two organic materials (pig slurry and compost; in combination with hydrated lime) for the remediation of a highly acidic and trace elements (TEs) contaminated mine soil and the reduction of its associated leaching risks. Their influence on the evolution throughout the soil depth of the physicochemical properties (including TEs mobility) of the soil and soil solution (in situ periodic collection) and on Lolium perenne growth and foliar TEs accumulation was evaluated. Soluble and extractable concentrations of the different TEs were considerably high, although the organic amendments (with lime) and lime addition successfully decreased TEs mobility in the top soil layer, as a consequence of a rise in pH and changes in the redox conditions. Compost and pig slurry increased the soluble organic-C and dissolved N, K and P of the soil, producing a certain downwards displacement of N and K. The organic amendments allowed the growth of L. perenne in the soil, thus indicating improvement of soil conditions, but elevated TEs availability in the soil led to toxicity symptoms and abnormally high TEs concentrations in the plants. An evaluation of the functioning and ecotoxicological risks of the remediated soils is reported in part II: this allows verification of the viability of the amendments for remediation strategies.

Efficiency of soil organic and inorganic amendments on the remediation of a contaminated mine soil: II. Biological and ecotoxicological evaluation

The feasibility of two organic materials (pig slurry and compost) in combination with hydrated lime for the remediation of a highly acidic trace elements (TEs) contaminated mine soil was assessed in a mesocosm experiment. The effects of the amendments on soil biochemical and ecotoxicological properties were evaluated and related with the main physicochemical characteristics of soil and soil solution. The original soil showed impaired basic ecological functions due to the high availability of TEs, its acidic pH and high salinity. The three amendments slightly reduced the direct and indirect soil toxicity to plants, invertebrates and microorganisms as a consequence of the TEs' mobility decrease in topsoil, reducing therefore the soil associated risks. The organic amendments, especially compost, thanks to the supply of essential nutrients, were able to improve soil health, as they stimulated plant growth and significantly increased enzyme activities related with the key nutrients in soil. Therefore, the use of compost or pig slurry, in combination with hydrated lime, decreased soil ecotoxicity and seems to be a suitable management strategy for the remediation of highly acidic TEs contaminated soils.

Evaluation of the phytostabilisation efficiency in a trace elements contaminated soil using soil health indicators

The efficiency of a remediation strategy was evaluated in a mine soil highly contaminated with trace elements (TEs) by microbiological, ecotoxicological and physicochemical parameters of the soil and soil solution (extracted in situ), as a novel and integrative methodology for assessing recovery of soil health. A 2.5-year field phytostabilisation experiment was carried out using olive mill-waste compost, pig slurry and hydrated lime as amendments, and a native halophytic shrub (Atriplex halimus L.). Comparing with non-treated soil, the addition of the amendments increased soil pH and reduced TEs availability, favoured the development of a sustainable vegetation cover (especially the organic materials), stimulated soil microorganisms (increasing microbial biomass, activity and functional diversity, and reducing stress) and reduced direct and indirect soil toxicity (i.e., its potential associated risks). Therefore, under semi-arid conditions, the use of compost and pig slurry with A. halimus is an effective phytostabilisation strategy to improve soil health of nutrient-poor soils with high TEs concentrations, by improving the habitat function of the soil ecosystem, the reactivation of the biogeochemical cycles of essential nutrients, and the reduction of TEs dissemination and their environmental impact.

A new ion-selective electrode for anionic surfactants

The new ligand 7-methyl-7,13-di-octyl-1,4,10-trioxa-13-aza-7-azonia-cyclopentadecane (L(1)) has been designed, synthesised and used as ionophore in the development ion-selective electrodes for anionic surfactants. Different PVC-membrane anionic-surfactants-selective electrodes were prepared by using L(1) as ionophore and bis(2-ethylhexyl)sebacate (BEHS), dibutyl phthalate (DBP) and nitrophenyl octyl ether (NPOE) as plasticizers. The PVC-membrane electrode containing L(1) and NPOE (electrode E1) showed a Nernstian response to lauryl sulfate with a slope of -59.5mV per decade in a range of concentrations from 1.3x10(-6) to 6.8x10(-3)M and a detection limit of 6.0x10(-7)M. The electrode E1 also showed a reasonable response to other alkyl sulfates and alkylbenzene sulfonates, whereas it does not respond to carboxylates and to cationic and non-ionic surfactants. A similar electrode to E1 but additionally containing the cationic additive n-octylammonium bromide was also prepared (electrode E2) and compared with the response of E1. Selectivity coefficients for different anions with respect to lauryl sulfate were determined by means of the fixed interference method considering lauryl sulfate as the principal anion and using a concentration of 1.0x10(-2)moldm(-3) for the corresponding interfering anion. The selectivity sequence found for the electrode E1 was: LS(-)>SCN(-)>ClO(4)(-)>CH(3)COO(-)>I(-)>HCO(3)(-)>Br(-)>NO(3)(-)>NO(2)(-)>Cl(-)>IO(3)(-)>phosphate>SO(3)(2-)>C(2)O(4)(2-)>SO(4)(2-). Electrode E1 showed remarkably better selectivity coefficients than electrode E2.

Ferrocene-cyclam: a redox-active macrocycle for the complexation of transition metal ions and a study on the influence of the relative permittivity on the coulombic interaction between metal cations

The reaction of 1,1'-ferrocene-bis(methylenepyridinium) salt with 1,4,8,11-tetraazacyclotetradecane-5,12-dione, followed by LiAlH4 reduction results in the formation of FcCyclam. Metal complexes of FcCyclam with M2+ = Co2+, Ni2+, Cu2+, and Zn2+ were synthesized from FcCyclam and the respective metal triflates. The complexation of Cu2+ and FcCyclam in CH3CN is preceeded by a rapid electron transfer, followed by a slower complex formation reaction and a reverse electron transfer. The protonation constants of FcCyclam and the stability constants for the Cu2+ complex of FcCyclam (logK = 9.26(4) for the formation of the [Cu(FcCyclam)]2+ complex) were determined in 1,4-dioxane/water 70:30 v/v, 0.1 moldm(-3), KNO3, 25 degrees C. By using FcCyclam one can selectively sense the presence of Cu2+ ions in the presence of Ni2+, Zn2+, Cd2+, Hg2+, and Pb2+ with a very large deltaE approximately 200 mV, depending on pH. The X-ray crystal structures of FcCyclam and of complexes with Co2+, Ni2+, Cu2+, and Zn2+ were determined and Fe-M2+ distances obtained: Fe-Co2+ 395.9, Fe-Ni2+ 385.4, Fe-Cu2+ 377.7, and Fe-Zn2+ 369.0 pm. The redox potential of FcCyclam is influenced in a characteristic manner by the complexation of M2+. A linear correlation of 1/r approximately/= deltaE [r = distance Fe-M2+ from crystal data, deltaE=-E1/2([M(FcCyclam)]2+) - E1/2(FcCyclam)] was found; this is indicative of a mainly Coulomb type interaction between the two metal centers. The nature of the Fe...M2+ interaction was also investigated by determining deltaE in several solvents (mixtures) of different dielectric constants epsilon. The expected relation of deltaE approximately/= 1/epsilon was only found at very high values of epsilon. At epsilon < 40 increased ion-pairing appears to reduce the effective positive charge at M2+ leading to progessively smaller values of deltaE with lowered epsilon. The dependence of deltaE and epsilon can be calculated semiquantitatively by combining the Fuoss ion-pairing theory with the Coulomb model.