Production of Water-Soluble Carbohydrates from Aspen Wood Flour with Hydrogen Chloride Gas

The aim of this study was to optimize the reaction conditions for concentrated acid hydrolysis of aspen wood flour by employing anhydrous hydrogen chloride gas to produce fermentable sugars. Gas hydrolysis with HCl was conducted both with and without temperature control during hydrolysis under a relatively low pressure of 0.1 MPa. Process parameters for HCl gas hydrolysis included the moisture content of aspen wood flour (0.7-50%) and reaction time under pressure (30 min to 24 h). In addition, liquid-phase hydrolysis with concentrated hydrochloric acid was conducted in concentrations of 32-42% and 15 min to 24 h reaction times for comparison with the gas-phase process. The highest yields (>90%) for water-soluble carbohydrates from aspen wood flour were achieved with temperature-controlled gas hydrolysis using 50% moisture content and 2 h total reaction time, which is in line with the previous research and comparable to hydrolysis with concentrated (42%) hydrochloric acid.

Efficient Isolation Method for Highly Charged Phosphorylated Cellulose Nanocrystals

Phosphorylation of cellulose nanocrystals (CNCs) has remained a marginal activity despite the undisputed application potential in flame-retardant materials, sustainable high-capacity ion-exchange materials, or substrates for biomineralization among others. This is largely due to strenuous extraction methods prone to a combination of poor reproducibility, low degrees of substitution, disappointing yields, and impractical reaction sequences. Here, we demonstrate an improved methodology relying on the modification routines for phosphorylated cellulose nanofibers and hydrolysis by gaseous HCl to isolate CNCs. This allows us to overcome the aforementioned shortcomings and to reliably and reproducibly extract phosphorylated CNCs with exceptionally high surface charge (∼2000 mmol/kg) in a straightforward routine that minimizes water consumption and maximizes yields. The CNCs were characterized by NMR, ζpotential, conductometric titration, thermogravimetry, elemental analysis, wide-angle X-ray scattering, transmission electron microscopy, and atomic force microscopy.

Degradation of cellulose polymorphs into glucose by HCl gas with simultaneous suppression of oxidative discoloration

As cellulose is the main polysaccharide in biomass, its degradation into glucose is a major undertaking in research concerning biofuels and bio-based platform chemicals. Here, we show that pressurized HCl gas is able to efficiently hydrolyze fibers of different crystalline forms (polymorphs) of cellulose when the water content of the fibers is increased to 30-50 wt%. Simultaneously, the harmful formation of strongly chromophoric humins can be suppressed by a simple addition of chlorite into the reaction system. 50-70 % glucose yields were obtained from cellulose I and II polymorphs while >90 % monosaccharide conversion was acquired from cellulose III_II after a mild post-hydrolysis step. Purification of the products is relatively unproblematic from a gas-solid mixture, and a gaseous catalyst is easier to recycle than the aqueous counterpart. The results lay down a basis for future practical solutions in cellulose hydrolysis where side reactions are controlled, conversion rates are efficient, and the recovery of products and reagents is effortless.

Effect of Moisture on Polymer Deconstruction in HCl Gas Hydrolysis of Wood

The HCl gas system previously used to produce cellulose nanocrystals was applied on Scots pine wood, aiming at a controlled deconstruction of its macrostructure while understanding the effect on its microstructure. The HCl gas treatments resulted in a well-preserved cellular structure of the wood. Differences in wood initial moisture content (iMC) prior to HCl gas treatment played a key role in hydrolysis rather than the studied range of exposure time to the acidic gas. Higher iMCs were correlated with a higher degradation of hemicellulose, while crystalline cellulose microfibrils were not largely affected by the treatments. Remarkably, the hydrogen-deuterium exchange technique showed an increase in accessible OH group concentration at higher iMCs, despite the additional loss in hemicelluloses. Unrelated to changes in the accessible OH group concentration, the HCl gas treatment reduced the concentration of absorbed D₂O molecules.

Visualizing Degradation of Cellulose Nanofibers by Acid Hydrolysis

Cellulose hydrolysis is an extensively studied process due to its relevance in the fields of biofuels, chemicals production, and renewable nanomaterials. However, the direct visualization of the process accompanied with detailed scaling has not been reported because of the vast morphological alterations occurring in cellulosic fibers in typical heterogeneous (solid/liquid) hydrolytic systems. Here, we overcome this distraction by exposing hardwood cellulose nanofibers (CNFs) deposited on silica substrates to pressurized HCl gas in a solid/gas system and examine the changes in individual CNFs by atomic force microscopy (AFM). The results revealed that hydrolysis proceeds via an intermediate semi-fibrous stage before objects reminiscent of cellulose nanocrystals were formed. The length of the nanocrystal-like objects correlated well with molar mass, as analyzed by gel permeation chromatography, performed on CNF aerogels hydrolyzed under identical conditions. Meanwhile, X-ray diffraction showed a slight increase in crystallinity index as the hydrolysis proceeded. The results provide a modern visual complement to >100 years of research in cellulose degradation.

Native Structure of the Plant Cell Wall Utilized for Top-Down Assembly of Aligned Cellulose Nanocrystals into Micrometer-Sized Nanoporous Particles

Despite their sustainable appeal, biomass components are currently undervalued in nanotechnology because means to control the assembly of bio-based nanoparticles are lagging behind the synthetic counterparts. Here, micrometer-sized particles consisting of aligned cellulose nanocrystals (CNCs) are prepared by crosslinking cellulose in cotton linter fibers that are prehydrolyzed with gaseous HCl, resulting in chemical cleavage necessary for CNC formation but retaining the morphology of the native fibers. That way, the intrinsic alignment of cellulose microfibrils within the fiber cell wall can be retained and utilized for top-down CNC alignment. Subsequent crosslinking with citric acid cements the alignment and preserves it, following the dispersion of CNCs trapped end-to-end, connected, and crosslinked within the colloidally stable micrometer-sized particles. Furthermore, thermoporosimetry and cryogenic transmission electron microscopy (Cryo TEM) shows that the particles possess mainly nanoporous (<2 nm) character in water. The approach challenges the current paradigm of predominantly bottom-up methods for nanoparticle assembly.

Dissolution and Hydrolysis of Bleached Kraft Pulp Using Ionic Liquids

Forestry industries in Chile are facing an important challenge-diversifying their products using green technologies. In this study, the potential use of Ionic Liquids (ILs) to dissolve and hydrolyze eucalyptus wood (mix of Eucalyptus nitens and Eucalyptus globulus) kraft pulp was studied. The Bleached Hardwood Kraft Pulp (BHKP) from a Chilean pulp mill was used together with five different ILs: 1-butyl-3-methylimidazolium chloride [bmim][Cl], 1-butyl-3-methylimidazolium acetate [bmim][Ac], 1-butyl-3-methylimidazolium hydrogen sulfate [bmim][HSO4], 1-ethyl-3-methylimidazolium chloride [emim][Cl], 1-ethyl-3-methylimidazolium acetate [emim][Ac]. Experimentally, one vacuum reactor was designed to study the dissolution/hydrolysis process for each ILs; particularly, the cellulose dissolution process using [bmim][Cl] was studied proposing one molecular dynamic model. Experimental characterization using Atomic Force Microscopy, conductometric titration, among other techniques suggest that all ILs are capable of cellulose dissolution at different levels; in some cases, the dissolution evolved to partial hydrolysis appearing cellulose nanocrystals (CNC) in the form of spherical aggregates with a diameter of 40-120 nm. Molecular dynamics simulations showed that the [bmim][Cl] anions tend to interact actively with cellulose sites and water molecules in the dissolution process. The results showed the potential of some ILs to dissolve/hydrolyze the cellulose from Chilean Eucalyptus, maintaining reactive forms.

From vapour to gas: optimising cellulose degradation with gaseous HCl

A cellulose degradation technique utilizing a pressurized HCl gas (up to 100 kPa) device is introduced.

Pituitary and autonomic responses to cold exposures in man

This review presents hormonal responses to various cold exposures and their calorigenic effects in man and some animals. Previous studies in rats have shown that cold exposures activate the hypothalamic-pituitary-thyroid axis. Increased thyroid hormone concentrations lead to heat production via general stimulation of metabolism (obligatory thermogenesis) and possibly via activation of thyroid hormone receptors and uncoupling protein 1 (UCP 1) and deiodinase enzyme genes in the brown adipose tissue (BAT). In human subjects long-term cold exposures do not seem to activate the pituitary-thyroid axis, but rather accelerate the elimination of triiodothyronine (T3), leading to low serum concentrations of free T3 hormone. In corollary to this a hypothyreotic condition with increased serum thyroid-stimulating hormone and impaired mood and cognitive performance can be observed after long-term cold exposures such as wintering. During cold exposures the sympathetic nerve system is activated and noradrenaline is released to blood circulation and to BAT, where it leads to production of cAMP, lipolysis and free fatty acids. Free fatty acids open the mitochondrial proton channel protein in BAT. Protons enter the mitochondria and inhibit ATP synthesis (uncoupling). By this way energy is transformed into heat (facultatory or adaptive thermogenesis). In adult human subjects the amount of BAT is small and adaptive thermogenesis (non-shivering thermogenesis) has a smaller role. UCP 1 with other uncoupling proteins may have other functions in the control of body weight, sugar balance and formation of reactive oxygen species.