Nonscattering Photodetection in the Propagation of Unidirectional Surface Plasmon Polaritons Embedded with Graphene

Recently, nanoscale light manipulation using surface plasmon polaritons (SPPs) has received considerable research attention. The conventional method of detecting SPPs is through light scattering or using bulky Si or Ge photodetectors. However, these bulky systems limit the application of nanophotonic circuits. In this study, the light-matter interaction between graphene and SPP was investigated. For realizing an improved integration in nanocircuits, single-layer graphene was added to asymmetric SPP nanoantenna arrays for nonscattering detection in the near field. The developed device is capable of detecting the controlled propagation of SPPs with a photoresponsivity of 15 mA/W, which paves the way for the new-generation on-chip optical communication.

Structural Colors Enabled by Lattice Resonance on Silicon Nitride Metasurfaces

Artificial color pixels based on dielectric Mie resonators are appealing for scientific research as well as practical design. Vivid colors are imperative for displays and imaging. Dielectric metasurface-based artificial pixels are promising candidates for developing flat, flexible, and/or wearable displays. Considering the application feasibility of artificial color pixels, wide color gamuts are crucial for contemporary display technology. To achieve a wide color gamut, ensuring the purity and efficiency of nanostructure resonance peaks in the visible spectrum is necessary for structural color design. Low-loss dielectric materials are suitable for achieving vivid colors with structural color pixels. However, high-order Mie resonances prevent color pixels based on dielectric metasurfaces from efficiently generating highly saturated colors. In particular, fundamental Mie resonances (electric/magnetic dipole) for red can result in not only a strong resonance peak at 650 nm but also high-order Mie resonances at shorter wavelengths, which reduces the saturation of the target color. To address these problems, we fabricated silicon nitride metasurfaces on quartz substrates and applied Rayleigh anomalies at relatively short wavelengths to successfully suppress high-order Mie resonances, thus creating vivid color pixels. We performed numerical design, semianalytic considerations, and experimental proof-of-concept examinations to demonstrate the performance of the silicon nitride metasurfaces. Apart from traditional metasurface designs that involve transmission and reflection modes, we determined that lateral light incidence on silicon nitride metasurfaces can provide vivid colors through long-range dipole interactions; this can thus extend the applications of such surfaces to eyewear displays and guided-wave illumination techniques.

Full-Spectrum Analysis of Perovskite-Based Surface Plasmon Nanolasers

We systematically studied the characteristics of hybrid perovskite-based surface plasmon nanolasers. If one changes the anion composition of perovskites, the emission wavelength can be easily tuned. We conducted in full-spectrum modeling that featured hybrid perovskite nanowires placed on different SiO₂-coated metallic (Au, Ag, and Al) plates. The proposed nanocavities that supported plasmonic gap modes exhibited distinguished properties of nanolasers, such as low-transparency threshold-gain and low lasing threshold. The corresponding experimental results for the MAPbBr₃ nanolaser on Ag revealed the low-threshold operation. These superior features were attributed to enhanced light-matter interaction with strong coupling. Therefore, the proposed scheme, integrated with hybrid perovskite as gain material, provides an excellent platform for nanoscale plasmon lasing in the visible to near-infrared spectra.

Plasmonic Nanolasers Enhanced by Hybrid Graphene-Insulator-Metal Structures

Graphene is a two-dimensional (2D) structure that creates a linear relationship between energy and momentum that not only forms massless Dirac fermions with extremely high group velocity but also exhibits a broadband transmission from 300 to 2500 nm that can be applied to many optoelectronic applications, such as solar cells, light-emitting devices, touchscreens, ultrafast photodetectors, and lasers. Although the plasmonic resonance of graphene occurs in the terahertz band, graphene can be combined with a noble metal to provide a versatile platform for supporting surface plasmon waves. In this study, we propose a hybrid graphene-insulator-metal (GIM) structure that can modulate the surface plasmon polariton (SPP) dispersion characteristics and thus influence the performance of plasmonic nanolasers. Compared with values obtained when graphene is not used on an Al template, the propagation length of SPP waves can be increased 2-fold, and the threshold of nanolasers is reduced by 50% when graphene is incorporated on the template. The GIM structure can be further applied in the future to realize electrical control or electrical injection of plasmonic devices through graphene.

Ultracompact Pseudowedge Plasmonic Lasers and Laser Arrays

Concentrating light at the deep subwavelength scale by utilizing plasmonic effects has been reported in various optoelectronic devices with intriguing phenomena and functionality. Plasmonic waveguides with a planar structure exhibit a two-dimensional degree of freedom for the surface plasmon; the degree of freedom can be further reduced by utilizing metallic nanostructures or nanoparticles for surface plasmon resonance. Reduction leads to different lightwave confinement capabilities, which can be utilized to construct plasmonic nanolaser cavities. However, most theoretical and experimental research efforts have focused on planar surface plasmon polariton (SPP) nanolasers. In this study, we combined nanometallic structures intersecting with ZnO nanowires and realized the first laser emission based on pseudowedge SPP waveguides. Relative to current plasmonic nanolasers, the pseudowedge plasmonic lasers reported in our study exhibit extremely small mode volumes, high group indices, high spontaneous emission factors, and high Purell factors beneficial for the strong interaction between light and matter. Furthermore, we demonstrated that compact plasmonic laser arrays can be constructed, which could benefit integrated plasmonic circuits.

Boosted photocatalytic efficiency through plasmonic field confinement with bowtie and diabolo nanostructures under LED irradiation

Photoresist and electron beam lithography techniques were used to fabricate embedded Ag bowtie and diabolo nanostructures with various apex angles on the surface of a TiO₂ film. The reinforced localized surface plasmon resonance (LSPR) and electric field generated at both the Ag/TiO₂ and air/TiO₂ interfaces enabled high light absorbance in the TiO₂ nanostructure. Results for both the bowtie and diabolo nanostructures showed that a reduction in the apex angle enhances both LSPR and Raman intensity. The maximum electric current density observed at the apex indicates that the strongest SPR confines at the tip gap of the bowtie and corners of the diabolo. In a long-wavelength region, as the apex angle increases, the resonant peak wavelength of the standing wave matches the increased length of the prism edges of the bowtie and diabolo to create a redshift. In a short-wavelength region, as the apex angle increases, the blueshift of the resonant peak wavelength is presumably attributable to the increase in the effective index of the local surface plasmon polariton standing wave mainly residing along both the bowtie and diabolo axes. The redshift and blueshift trend in the simulation results for the resonant peak wavelength agrees well with the experimental results. The fastest photocatalytic rate was obtained by placing the Ag/TiO₂ bowtie at an apex angle of 30° in the methylene blue solution, revealing that the plasmonic photocatalysis causes the highest degradation efficiency. This is because the Schottky junction and LSPR can stimulate many valid radicals for the environmental improvement.

High-Operation-Temperature Plasmonic Nanolasers on Single-Crystalline Aluminum

The recent development of plasmonics has overcome the optical diffraction limit and fostered the development of several important components including nanolasers, low-operation-power modulators, and high-speed detectors. In particular, the advent of surface-plasmon-polariton (SPP) nanolasers has enabled the development of coherent emitters approaching the nanoscale. SPP nanolasers widely adopted metal-insulator-semiconductor structures because the presence of an insulator can prevent large metal loss. However, the insulator is not necessary if permittivity combination of laser structures is properly designed. Here, we experimentally demonstrate a SPP nanolaser with a ZnO nanowire on the as-grown single-crystalline aluminum. The average lasing threshold of this simple structure is 20 MW/cm(2), which is four-times lower than that of structures with additional insulator layers. Furthermore, single-mode laser operation can be sustained at temperatures up to 353 K. Our study represents a major step toward the practical realization of SPP nanolasers.

Acousto-optic coupling in phoxonic crystal nanobeam cavities with plasmonic behavior

Acousto-optic (AO) coupling in a two-layer GaAs/Ag heterogeneous phoxonic crystal nanobeam cavity with plasmonic behavior is studied numerically. Because of the Ag metal layer, the cavity structure hybridizes photons and surface plasmons, squeezing the optical energy into small regions near the GaAs/Ag interface; the phononic cavity modes can be simultaneously tailored to highly match the photonic cavity modes at reduced regions in the cavity. Consequently, AO coupling is enhanced at near-infrared wavelengths. Boosting of the interface effect by the acoustic displacement field mainly contributes to the AO coupling enhancement. The simultaneous small photonic mode volume and high spatial matching of photonic and phononic cavity modes enhance the photonic resonance wavelength shift by one order of magnitude. This study enables applications of strong AO or photon-phonon interaction in subwavelength nano-structures.

Strong Optomechanical Interaction in Hybrid Plasmonic-Photonic Crystal Nanocavities with Surface Acoustic Waves

We propose dynamic modulation of a hybrid plasmonic-photonic crystal nanocavity using monochromatic coherent acoustic phonons formed by ultrahigh-frequency surface acoustic waves (SAWs) to achieve strong optomechanical interaction. The crystal nanocavity used in this study consisted of a defective photonic crystal beam coupled to a metal surface with a nanoscale air gap in between and provided hybridization of a highly confined plasmonic-photonic mode with a high quality factor and deep subwavelength mode volume. Efficient photon-phonon interaction occurs in the air gap through the SAW perturbation of the metal surface, strongly coupling the optical and acoustic frequencies. As a result, a large modulation bandwidth and optical resonance wavelength shift for the crystal nanocavity are demonstrated at telecommunication wavelengths. The proposed SAW-based modulation within the hybrid plasmonic-photonic crystal nanocavities beyond the diffraction limit provides opportunities for various applications in enhanced sound-light interaction and fast coherent acoustic control of optomechanical devices.

Ultrastrong Mode Confinement in ZnO Surface Plasmon Nanolasers

Nanolasers with an ultracompact footprint can provide high-intensity coherent light, which can be potentially applied to high-capacity signal processing, biosensing, and subwavelength imaging. Among various nanolasers, those with cavities surrounded by metals have been shown to have superior light emission properties because of the surface plasmon effect that provides enhanced field confinement capability and enables exotic light-matter interaction. In this study, we demonstrated a robust ultraviolet ZnO nanolaser that can operate at room temperature by using silver to dramatically shrink the mode volume. The nanolaser shows several distinct features including an extremely small mode volume, a large Purcell factor, and a slow group velocity, which ensures strong interaction with the exciton in the nanowire.

Coupled nanowire-based hybrid plasmonic nanocavities on thin substrates

We theoretically analyze nanowire-based hybrid plasmonic nanocavities on thin substrates at visible wavelengths. In the presence of thin suspended substrates, the hybrid plasmonic modes, formed by the coupling between a metal nanowire and a dielectric nanowire with optical gain, exhibit negligible substrate-mediated characteristics and overlap better with the gain region. Consequently, the confinement factor of the guided hybrid modes is enhanced by more than 42%. However, the presence of significant mirror loss remains the main challenge to lasing. By adding silver coatings with a sufficient thickness range on the two end facets, we show that the reflectivity is substantially enhanced to above 50%. For a coating thickness of 50 nm and cavity length of about 4 μm, the quality factor is above 100.

Photonic band gaps induced by submicron acoustic plate waves in dielectric slab waveguides

We generate photonic bandgaps (PBGs) in dielectric slab waveguides by exciting their acoustic plate eigenmodes of submicron wavelength. We investigate the optical forbidden bands below the light line where the slab interfaces and index of refraction are periodically modulated by the acoustic fields. Results show that multiple scattering through the enhanced periodic acousto-optic (AO) interaction opens Bragg PBGs. A tunable bandgap width and transmittance are achieved. Transmitted optical waves are found to incur strong nonlinear modulation through AO interaction by a multiphonon exchange mechanism. The applications include tunable optomechanical and AO devices.

Plasmonic gap-mode nanocavities with metallic mirrors in high-index cladding

We theoretically analyze plasmonic gap-mode nanocavities covered by a thick cladding layer at telecommunication wavelengths. In the presence of high-index cladding materials such as semiconductors, the first-order hybrid gap mode becomes more promising for lasing than the fundamental one. Still, the significant mirror loss remains the main challenge to lasing. Using silver coatings within a decent thickness range at two end facets, we show that the reflectivity is substantially enhanced above 95 %. At a coating thickness of 50 nm and cavity length of 1.51 μm, the quality factor is about 150, and the threshold gain is lower than 1500 cm(-1).

Theory of plasmonic fabry-perot nanolasers

Semiconductor plasmonic Fabry-Perot lasers at submicron and nanometer scales exhibit many characteristics distinct from those of their conventional counterparts at micron scale. The differences originate from their small sizes and the presence of plasma metal in the cavity. To design a laser of this type, these features have to be taken into account properly. In this paper, we provide a comprehensive approach to the design and performance evaluation of the plasmonic Fabry-Perot nanolasers. In particular, we show the proper procedure to obtain the key parameters for lasing action, which are usually neglected in the conventional semiconductor Fabry-Perot lasers but become important for nanolasers.

Lysophosphatidic acid stimulates calcium transients in enteric glia

The enteric nervous system plays an integral role in the gastrointestinal tract. Within this intricate network, enteric glia are crucial in the maintenance of normal bowel function, yet their signaling mechanisms are poorly understood. Enteric glia, and not enteric neurons, selectively responded to lysophosphatidic acid (LPA), a product of phosphatidylcholine metabolism, with dose-dependent calcium (Ca(2+)) signaling over a range from 100 pM to 10 microM. The elicited calcium transients involved both the mobilization of intracellular Ca(2+) stores and the influx of extracellular Ca(2+) as LPA signals were obliterated following the depletion of intracellular Ca(2+) and attenuated by the removal of Ca(2+) from the perfusion buffer. Pretreatment with pertussis toxin (100 ng/ml) reduced the magnitude of LPA Ca(2+) transients (95+/-20 nM vs 168+/-17 nM for controls). Repetitive exposure yielded diminished responsiveness, with a 25% reduction in [Ca(2+)](i) between first and second exposures. Inhibition of the inositol 1,4,5-trisphosphate (IP(3)) receptor with 200 microM 2-aminoethoxydiphenylborate (2APB) abolished LPA signals. RT-PCR analysis demonstrated the presence of two LPA-coupled endothelial differentiation gene (EDG) receptor mRNAs (EDG-2 and EDG-7) in myenteric plexus primary cultures. EDG-2 expression in glial cells of the ENS was confirmed immunocytochemically.

Retinal degeneration but not obesity is observed in null mutants of the tubby-like protein 1 gene

The tub gene is a member of a small, well conserved neuronal gene family of unknown function. Mutations within this gene lead to early-onset blindness and deafness, as well as late-onset obesity and insulin resistance. To test the hypothesis that mutations within other members of this gene family would lead to similar phenotypes as observed in tubby mice, and hence have similar functional properties, we have generated null mutants of the tubby-like protein ( Tulp ) 1 gene by homologous recombination. Similarly to tubby mice, Tulp1 (-/-)mice exhibit an early-onset retinal degeneration with a progressive, rapid loss of photoreceptors, further supporting the notion that previously identified mutations within the human TULP1 gene are indeed causative of retinitis pigmentosa. However, in contrast to tubby mice, Tulp1 (-/-)mice exhibited normal hearing ability and, surprisingly, normal body weight despite the fact that both TUB and TULP1 are expressed in the same neurons within the hypothalamus in areas known to be involved in feeding behavior and energy homeo stasis. However, TUB and TULP1 show a distinctly different staining pattern in the nucleus of these neurons, perhaps explaining the difference in body weight between the Tulp1 (-/-)and tubby mutant mice.

Differential distribution of intercellular adhesion molecules (ICAM-1, ICAM-2, and ICAM-3) and the MS-1 antigen in normal and diseased human synovia. Their possible pathogenetic and clinical significance in rheumatoid arthritis

OBJECTIVE

Cellular adhesion and differentiation molecules (CAMs) may play a role in the recruitment and retention of inflammatory cells into rheumatoid arthritis synovial tissue (RA ST). In order to determine if certain CAMs are up-regulated in RA ST compared with normal ST, we studied the distribution of intercellular adhesion molecules (ICAMs) 1, 2, and 3 in ST. We also studied the MS-1 antigen since it is preferentially expressed on discontinuous endothelia, such as those found in RA ST; MS-1 is also expressed differentially upon cytokine activation of cells in vitro or in pathologic conditions in situ. Thus, we postulated a possible similarity between MS-1 and ICAM-1 expression in inflamed ST.

METHODS

Immunohistochemical analysis was used to determine the distribution of ICAMs and MS-1 in ST from 10 patients with RA, 10 with osteoarthritis (OA), and 4 normal individuals.

RESULTS

ICAM-1 expression was found on significantly more RA ST endothelial cells compared with normal cells, as well as on RA ST macrophages and lining cells. ICAM-2, also found on endothelial cells, showed no differential staining pattern. ICAM-3 was present on RA ST macrophages and lining cells as well as on some RA and OA endothelial cells. The MS-1 antigen was present on most RA and OA ST endothelia, lining cells, and macrophages. ICAM-1 expression and MS-1 expression in the lining layer were positively correlated in both RA and OA.

CONCLUSION

ICAM-1, while found mainly on endothelial cells, is up-regulated on RA ST macrophages and lining cells, suggesting a role for these cells in the infiltration and tissue damage seen in the RA ST: ICAM-3, which is present mainly on normal resting leukocytes but not on normal endothelium, is expressed by some diseased ST leukocytes and endothelial cells. MS-1 is also found on the RA ST specialized, fenestrated endothelium, on macrophages, and in the lining layer. These results suggest that the differential expression of ICAMs and MS-1 in RA ST compared with normal ST might play a special role in the pathogenesis of RA.