Interpenetration Networked Polyimide-Epoxy Copolymer under Kinetic and Thermodynamic Control for Anticorrosion Coating

Epoxy (EP) was copolymerized with polyamic acid (PAA, precursor of polyimide (PI)) with termanil monomers of (1) 4,4'-Oxydianiline (ODA) and (2) pyromellitic dianhydride (PMDA) individually to form (PI-O-EP) and (PI-P-EP) copolymers. The FTIR spectrum of PI-O-EP copolymerization intermediates shows that some amide-EP linkages were formed at low temperature and were broken at higher temperature; in additoin, the released amide was available for subsequent imidization to form PI. The curing and imidization of the amide groups on PAA were determined by reaction temperature (kinetic vs. thermodynamic control). In PI-P-EP, the released amide group was very short-lived (fast imidization) and was not observed on FTIR spectra. Formation and breakage of the amide-EP linkages is the key step for EP homopolymerization and formation of the interpenetration network. PI contributed in improving thermal durability and mechanical strength without compromising EP's adhesion strength. Microphase separations were minimal at PI content less than 10 wt%. The copolymerization reaction in this study followed the "kinetic vs. thermodynamic control" principle. The copolymer has high potential for application in the field of higher-temperature anticorrosion.

Zr-MOF/Polyaniline Composite Films with Exceptional Seebeck Coefficient for Thermoelectric Material Applications

Controlling the polymerization of aniline in the presence of zirconium-based metal-organic frameworks (Zr-MOFs) using polystyrene sulfonic acid as a dopant resulted in the formation of a new type of free-standing thermoelectric composite film. Polyaniline chains interpenetrate into the Zr-MOFs to enhance the crystallinity of polyaniline, resulting in an improved degree of electrical conductivity. In addition, the inherent porosity of the Zr-MOFs functions to suppress the increase in thermal conductivity, thus dramatically promoting a negative Seebeck coefficient. When 20 wt % Zr-MOF was used, a power factor of up to 664 μW/(m K²) was obtained, which was accompanied by a surprisingly large, negative Seebeck coefficient. The new class of MOF-based composites offers a new direction for developing new types of efficient thermoelectric materials.

Facile Synthesis of Diamino-Modified Graphene/Polyaniline Semi-Interpenetrating Networks with Practical High Thermoelectric Performance

p-Phenediamino-modified graphene (PDG) has been newly synthesized via a facile green one-step chemical route as a functionalized graphene-based additive to copolymerize with aniline for fabricating innovative PDG/polyaniline conducting polymer composites containing very special semi-interpenetrating networks (S-IPNs). The S-IPNs not only provide additional pathways by creating chemically bonded PDG and PANI for smoothly transporting carriers but greatly reduce the amount of graphene required to less than a few percent could effectively improve the overall electrical conductivity, Seebeck coefficient, and thus the thermoelectric (TE) performance. The found optimized TE figure of merit (ZT) of 0.74 approaches a practical high level which is comparable or much higher than previously reported ones for TE polymers.

Hollow V₂O₅ Nanoassemblies for High-Performance Room-Temperature Hydrogen Sensors

Nanostructured oxides with characteristic morphologies are essential building blocks for high-performance gas-sensing devices. We describe the high-yield fabrication of a series of functionalized V2O5 nanoassemblies through a facile polyol approach with specific varieties of polyvinylpyrrolidone. The synthesized V2O5 nanoassemblies consisting of tiny one-dimensional nanoblocks with the absence of any extrinsic catalysts exhibit distinct hemispherical or spherical hollow morphologies and operate as room-temperature hydrogen sensors with remarkable sensitivities and responses.

Copolymer and platinum ion assisted growth of functionalized gold nanonests

Novel Au nanonests with high yield and uniformity were successfully synthesized using P123 as a soft template and a reductant in an ice water bath with and without the presence of the second metallic source of Pt ions.

Smart assembling of multi-scaled functional interfaces in thermoelectric Ga₂Te₃/Te hetero-nanocomposites

We describe an innovative concept and facile approach in fabricating laterally assembled Ga₂Te₃/Te binary nanocomposite films, which comprise two-dimensional quasi-periodic Ga₂Te₃ nanoassemblies surrounded by interlocking highly-conductive Te single crystals for comprehensively establishing subnano- to micro-scaled multi-style versatile interfaces. The distinct Ga₂Te₃/Te nanocomposite film exhibits a power factor that is about 60 times higher than the reported conventional Ga₂Te₃ and Te materials, mainly due to the 2- to 3-order improved electrical conductivity and the comparable Seebeck coefficient.

PQ:DMNA/PMMA photopolymer having amazing volume holographic recording at wavelength of insignificant absorption

N, N-dimethyl-4-nitroaniline doping enables red-light holographic recording that was originally insensitive in thick phenanthrenequinone/poly(methyl methacrylate) photopolymer to have reasonable sensitivity. A volume hologram was recorded by a 647 nm laser with maximum diffraction efficiency of about 43% in a 2-mm-thick sample. A Bragg selectivity curve and an image hologram reconstruction are also demonstrated. These experimental results support recording material for volume holographic applications in an extended red spectral range.

Measurement of organic chemical refractive indexes using an optical time-domain reflectometer

In this investigation, we propose and experimentally demonstrate a method for measuring the refractive index (RI) of liquid organic chemicals. The scheme is based on a single-mode fiber (SMF) sensor and an optical time-domain reflectometer (OTDR). Here, due to the different reflectance (R) between the SMF and organic liquid chemicals, the reflected power level of the backscattering light (BSL) measured by the OTDR would be different. Therefore, we can measure the RI of chemical under test via the measured BSL level. The proposed RI sensor is simple and easy to manipulate, with stable detected signals, and has the potential to be a valuable tool for use in biological and chemical applications.

One-step fabrication of carbon nanotubes decorated with graphitic nanoflakes for energy storage systems

We have used a bias-assisted microwave plasma chemical vapor deposition system to synthesize carbon nanotubes presenting graphitic nanoflakes, named coral-like carbon nanotubes, and well-aligned carbon nanotubes on carbon cloth substrates. Applying an external bias of -100 V led to the growth of well-aligned carbon nanotubes. In the absence of an external bias, the coral-like nanotubes presenting graphite nanoflakes were formed. The specific surface areas of the well-aligned and coral-like carbon nanotubes electrodes were 90.31 and 143.69 m2/g, respectively. In terms of energy storage, we estimated the capacitance of the coral-like carbon nanotube electrode to be ca. 194 F/g in an electrolyte of 1 M H2SO4. This value is almost double that of the well-aligned carbon nanotubes electrode (104 F/g), presumably because the presence of the carbon nanoflakes had a positive influence on the migration and adsorption of ions within the electrode. The fitting results indicated that the coral-like carbon nanotubes electrode behaved as a traditional electrochemical capacitor. Durability tests revealed that the coral-like carbon nanotube electrode was reliable, with a decay of 9% in capacitance over 1000 cycles.

Observation of enhanced cell adhesion and transfection efficiency on superhydrophobic surfaces

It was found that cells attached preferentially on the roughened area of patterned superhydrophobic surfaces allowing the formation of cell microarrays with the advantages of improved cell adhesion, natural separation of colonies and enhanced transfection efficiency.

Morphological control of CuPc and its application in organic solar cells

We have prepared organic photovoltaic (OPV) cells possessing an ideal bulk heterojunction (BHJ) structure using the self-assembly of copper phthalocyanine (CuPc) as the donor material and fullerene (C(60)) as the acceptor. The variable self-assembly behavior of CuPc on a diverse range of substrates (surface energies) allowed us to control the morphology of the interface and the degree of carrier transportation within the active layer. We observed rod-like CuPc structures on indium-tin oxide (ITO), poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate) (PEDOT:PSS) and Au substrates. Accordingly, the interfaces and continuing transport path between CuPc and fullerene domains could be greatly improved due to the ideal BHJ structure. In this paper, we discuss the mechanisms of producing CuPc rod-like films on ITO, PEDOT:PSS and Au. The OPV cell performance was greatly enhanced when a mixture of horizontal and vertical CuPc rods was present on the PEDOT:PSS surfaces, i.e. the power conversion efficiency was 50 times greater than that of the corresponding device featuring a planar CuPc structure.

Phenanthrenequinone-doped poly(methyl methacrylate) photopolymer bulk for volume holographic data storage

We present the design and fabrication of a phenanthrenequinone-doped poly(methyl methacrylate) photopolymer material. Large blocks of samples were made, and the material showed negligible shrinkage after optical exposures. We recorded and reconstructed 250 holograms at a single spot, using a 1-cm(3) block.