Ag@TiO2 nanoribbon array: a high-performance sensor for electrochemical non-enzymatic glucose detection in beverage sample

Developing an accurate, cost-effective, reliable, and stable glucose detection sensor for the food industry poses a significant yet challenging endeavor. Herein, we present a silver nanoparticle-decorated titanium dioxide nanoribbon array on titanium plate (Ag@TiO2/TP) as an efficient electrode for non-enzymatic glucose detection in alkaline environments. Electrochemical evaluations of the Ag@TiO2/TP electrode reveal a broad linear response range (0.001 mM - 4 mM), high sensitivity (19,106 and 4264 μA mM-1 cm-2), rapid response time (6 s), and a notably low detection limit (0.18 μM, S/N = 3). Moreover, its efficacy in measuring glucose in beverage samples shows its practical applicability. The impressive performance and structural benefits of the Ag@TiO2/TP electrode highlight its potential in advancing electrochemical sensors for small molecule detection.

High-efficiency electrocatalytic nitrite-to-ammonia conversion on molybdenum doped cobalt oxide nanoarray at ambient conditions

Electrochemical conversion of nitrite (NO2-) contaminant to green ammonia (NH3) is a promising approach to achieve the nitrogen cycle. The slow kinetics of the complex multi-reaction process remains a serious issue, and there is still a need to design highly effective and selective catalysts. Herein, we report that molybdenum doped cobalt oxide nanoarray on titanium mesh (Mo-Co3O4/TM) acts as a catalyst to facilitate electroreduction of NO2- to NH3. Such a catalyst delivers an extremely high Faradaic efficiency of 96.9 % and a corresponding NH3 yield of 651.5 μmol h-1 cm-2 at -0.5 V with strong stability. Density functional theory calculations reveal that the introduction of Mo can induce the redistribution of electrons around Co atoms and further strengthen the adsorption of NO2-, which is the key to facilitating the catalytic performance. Furthermore, the assembled battery based on Mo-Co3O4/TM suggests its practical application value.

Effects of 3-nitrooxypropanol (3-NOP, Bovaer®10) and whole cottonseed on milk production and enteric methane emissions from dairy cows under Swiss management conditions

The objective of this study was to determine the potential effect and interaction of 3- nitrooxypropanol (3-NOP; Bovaer®) and whole cottonseed (WCS) on lactational performance, and enteric methane (CH4) emission of dairy cows. A total of 16 multiparous cows, including 8 Holstein Friesian (HF) and 8 Brown Swiss (BS) [224 ± 36 d in milk, 26 ± 3.7 kg milk yield], were used in a split-plot design, where the main plot was the breed of cows. Within each subplot, cows were randomly assigned to a treatment sequence in a replicated 4 × 4 Latin Square design with 2 × 2 factorial arrangements of treatments with 4, 24-d periods. The experimental treatments were: 1) Control (basal TMR), 2) 3-NOP (60 mg/kg TMR DM), 3) WCS (5% TMR DM), and 4) 3-NOP + WCS. The treatment diets were balanced for ether extract, crude protein, and NDF contents (4%, 16%, and 43% of TMR DM, respectively). The basal diets were fed twice daily at 0800 and 1800 h. Dry matter intake (DMI) and milk yield were measured daily, and enteric gas emissions were measured (using the GreenFeed system) during the last 3 d of each 24-d experimental period when animals were housed in tie stalls. There was no difference in DMI on treatment level, whereas the WCS treatment increased ECM yield and milk fat yield. There was no interaction of 3-NOP and WCS for any of the enteric gas emission parameters, but 3-NOP decreased CH4 production (g/d), CH4 yield (g/kg DMI), and CH4 intensity (g/kg ECM) by 13, 14 and 13%, respectively. Further, an unexpected interaction of breed by 3-NOP was observed for different enteric CH4 emission metrics: HF cows had a greater CH4 mitigation effect compared with BS cows for CH4 production (g/d; 18 vs. 8%), CH4 intensity (g/kg MY; 19% vs. 3%) and CH4 intensity (g/kg ECM; 19 vs. 4%). Hydrogen production was increased by 2.85 folds in HF and 1.53 folds in BS cows receiving 3-NOP. Further, there was a 3-NOP ' Time interaction for both breeds. In BS cows, 3-NOP tended to reduce CH4 production by 18% at around 4 h after morning feeding but no effect was observed at other time points. In HF cows, the greatest mitigation effect of 3-NOP (29.6%) was observed immediately after morning feeding and it persisted at around 23% to 26% for 10 h until the second feed provision, and 3 h thereafter, in the evening. In conclusion, supplementing 3-NOP at 60 mg/kg DM to a high fiber diet resulted in 18 to 19% reduction in enteric CH4 emission in Swiss Holstein Friesian cows. The lower response to 3-NOP by BS cows was unexpected and has not been observed in other studies. These results should be interpreted with caution due to low number of cows per breed. Lastly, supplementing WCS at 5% of DM improved ECM and milk fat yield but did not enhance CH4 inhibition effect of 3-NOP of dairy cows.

Oxalate anions-intercalated NiFe layered double hydroxide as a highly active and stable electrocatalyst for alkaline seawater oxidation

Seawater electrolysis is gaining recognition as a promising method for hydrogen production. However, severe anode corrosion caused by the high concentration of chloride ions (Cl-) poses a challenge for the long-term oxygen evolution reaction. Herein, an anti-corrosion strategy of oxalate anions intercalation in NiFe layered double hydroxide on nickel foam (NiFe-C2O42- LDH/NF) is proposed. The intercalation of these highly negatively charged C2O42- serves to establish electrostatic repulsion and impede Cl- adsorption. In alkaline seawater, NiFe-C2O42- LDH/NF requires an overpotential of 337 mV to gain the large current density of 1000 mA cm-2 and operates continuously for 500 h. The intercalation of C2O42- is demonstrated to significantly boost the activity and stability of NiFe LDH-based materials during alkaline seawater oxidation.

Search for exotic decays of the Higgs boson to a pair of pseudoscalars in the μμbb and ττbb final states

A search for exotic decays of the Higgs boson (H ) with a mass of 125Ge V to a pair of light pseudoscalars a 1 is performed in final states where one pseudoscalar decays to two b quarks and the other to a pair of muons or τ leptons. A data sample of proton-proton collisions at s = 13 Te V corresponding to an integrated luminosity of 138fb - 1 recorded with the CMS detector is analyzed. No statistically significant excess is observed over the standard model backgrounds. Upper limits are set at 95% confidence level (CL ) on the Higgs boson branching fraction to μ μ b b and to τ τ b b , via a pair of a 1 s. The limits depend on the pseudoscalar mass m a 1 and are observed to be in the range (0.17-3.3) × 10 - 4 and (1.7-7.7) × 10 - 2 in the μ μ b b and τ τ b b final states, respectively. In the framework of models with two Higgs doublets and a complex scalar singlet (2HDM+S), the results of the two final states are combined to determine upper limits on the branching fraction B ( H → a 1 a 1 → ℓ ℓ b b ) at 95% CL , with ℓ being a muon or a τ lepton. For different types of 2HDM+S, upper bounds on the branching fraction B ( H → a 1 a 1 ) are extracted from the combination of the two channels. In most of the Type II 2HDM+S parameter space, B ( H → a 1 a 1 ) values above 0.23 are excluded at 95% CL for m a 1 values between 15 and 60Ge V .

NbC Nanoparticles Decorated Carbon Nanofibers as Highly Active and Robust Heterostructural Electrocatalysts for Ammonia Synthesis

Transition-metal carbides with metallic properties have been extensively used as electrocatalysts due to their excellent conductivity and unique electronic structures. Herein, NbC nanoparticles decorated carbon nanofibers (NbC@CNFs) are proposed as an efficient and robust catalyst for electrochemical synthesis of ammonia from nitrate/nitrite reduction, which achieves a high Faradaic efficiency (FE) of 94.4% and a large ammonia yield of 30.9 mg h-1 mg-1cat.. In situ electrochemical tests reveal the nitrite reduction at the catalyst surface follows the *NO pathway and theoretical calculations reveal the formation of NbC@CNFs heterostructure significantly broadens density of states nearby the Fermi energy. Finite element simulations unveil that the current and electric field converge on the NbC nanoparticles along the fiber, suggesting the dispersed carbides are highly active for nitrite reduction.

[Silent pulmonary shadows]

An elderly woman with a 1-year history of pulmonary shadows was admitted because of intermittent cough and sputum production for 2 months. Chest computed tomography (CT) scans showed bilateral consolidations and ground-glass opacities, with areas of low attenuation inside consolidative opacities on the mediastinal window. Previous history of radiotherapy for nasopharyngeal carcinoma and long-term use of a compound menthol nasal drops provided were important clues to the diagnosis. CT scan-guided needle lung biopsy and bronchoalveolar lavage were performed, and lipid-laden macrophages were confirmed in both bronchoalveolar lavage and lung tissue. Final diagnosis of exogenous lipoid pneumonia was made on the basis of her risk factors for aspiration, history of oil exposure, and classic radiological and histopathological features. Symptoms improved after discontinuation of causative exposure. It is important for clinicians to raise awareness of exogenous lipoid pneumonia and other aspiration lung diseases.

Ru doped NiMoO4 nanoarray as a high-efficiency electrocatalyst for nitrite reduction to ammonia

The electrocatalytic reduction of nitrite to recyclable ammonia (NH3) is essential to maintain nitrogen balance and meet growing energy requirements. Herein, we report that Ru doped honeycomb NiMoO4 nanosheet with copious oxygen vacancies grown on nickel foam substrate has been prepared by a facile hydrothermal synthesis and immersion process, which can act as an efficient electrocatalyst for NH3 synthesis by reduction of nitrite. By optimizing the concentration of RuCl3 solution, 0.01Ru-NiMoO4/NF possesses excellent NO2-RR performance with NH3 yield of 20249.17 ± 637.42 μg h-1 cm-2 at -0.7 V and FE of 95.56 ± 0.72 % at -0.6 V. When assembled into a Zn-NO2- battery, it provides a remarkable level of power density of 13.89 mW cm-2, outperforming the performance of virtually all previous reports. The efficient adsorption and activation of NO2- over Ru-doped NiMoO4 with oxygen vacancy have been verified by density functional theory calculations, as well as the possible reaction pathway.

CT quantification of pulmonary vessels in lung aging

AIM

To evaluate the effect of aging on pulmonary vessels based on computed tomography (CT) quantification and analyse the correlation between quantitative pulmonary vascular volume and pulmonary function during aging.

MATERIALS AND METHODS

A total of 330 healthy adult volunteers, including 161 men (53 aged 20-39 years, 61 aged 40-59 years, and 47 aged ≥60 years) and 169 women (53 aged 20-39 years, 63 aged 40-59 years, and 53 aged ≥60 years) were recruited in this study. AVIEW software was used to quantitatively measure pulmonary vascular volume, including pulmonary total blood vessel volume (TBV) and small blood vessel volume with a cross-sectional area of <5 mm2 (BV5). Pulmonary vascular volume parameters were standardised using the ratio of vascular volume to the body surface area (BSA; TBV/BSA and BV5/BSA). Subsequently, the effect of aging on the pulmonary vessels was analysed.

RESULTS

The pulmonary vascular volume parameters TBV/BSA and BV5/BSA of the whole lung, right lung, and left lung decreased significantly with increasing age (p<0.05). Additionally, TBV/BSA and BV5/BSA of the whole lung were higher in men than in women. The declining trend of pulmonary vascular volume was consistent in men and women and increased with age.

CONCLUSIONS

The pulmonary vascular volume parameters, TBV/BSA and BV5/BSA, decreased with age and were weakly positively correlated with pulmonary function.

A Metal Coordination Number Determined Catalytic Performance in Manganese Borides for Ambient Electrolysis of Nitrogen to Ammonia

A new strategy that can effectively increase the nitrogen reduction reaction performance of catalysts is proposed and verified by tuning the coordination number of metal atoms. It is found that the intrinsic activity of Mn atoms in the manganese borides (MnBx) increases in tandem with their coordination number with B atoms. Electron-deficient boron atoms are capable of accepting electrons from Mn atoms, which enhances the adsorption of N2 on the Mn catalytic sites (*) and the hydrogenation of N2 to form *NNH intermediates. Furthermore, the increase in coordination number reduces the charge density of Mn atoms at the Fermi level, which facilitates the desorption of ammonia from the catalyst surface. Notably, the MnB4 compound with a Mn coordination number of up to 12 exhibits a high ammonia yield rate (74.9 ± 2.1 µg h-1 mgcat -1) and Faradaic efficiency (38.5 ± 2.7%) at -0.3 V versus reversible hydrogen electrode (RHE) in a 0.1 m Li2SO4 electrolyte, exceeding those reported for other boron-related catalysts.

Prognostic value of serial coronary computed tomography angiography-derived perivascular fat-attenuation index and plaque volume in patients with suspected coronary artery disease

AIMS

To investigate the prognostic value of serial coronary computed tomography angiography (CCTA) derived plaque information, fractional flow reserve (CT-FFR), and perivascular fat-attenuation index (FAI) on major adverse cardiac events (MACE) in patients with suspected coronary artery disease.

MATERIALS AND METHODS

A total of 252 patients who underwent serial CCTA between January 2018 and December 2021 and were followed until June 2022. MACE were recorded. The analysis indexes included percent diameter stenosis (%DS), lesion length, plaque volume, CT-FFR, and FAI, with an emphasis on their changes between the baseline and follow-up CCTAs. Multivariate regression analysis were employed to identify independent risk factors for MACE.

RESULTS

After a median follow-up of 48-month, MACE occurred in 32 patients (12.7%). Patients with MACE displayed more severe stenosis, longer lesions, and larger plaque volumes in both baseline and follow-up CCTAs compared with no-MACE patients (all P<0.05). Patients with MACE displayed more severe stenosis, longer lesion, and larger plaque volume in both baseline and follow-up CCTAs compared with no-MACE patients. In addition, MACE patients also showed lower CT-FFR and higher △CT-FFR. Although FAI was significantly higher in MACE patients at baseline CCTA, FAI was notably increased in MACE patients, and decreased in the no-MACE patients (all P<0.05). Logistic regression analysis showed that ΔFAI, %DS, and plaque volume were independent predictors of MACE, with ΔFAI being the most significant (OR: 16.725, P<0.000). A multivariable model showed a significantly improved C-index of 0.903 (95% confidence interval: 0.836-0.970) for MACE prediction, when compared with single index alone.

CONCLUSIONS

Serial CCTA-derived ΔFAI, %DS, and plaque volume are crucial independent predictors of MACE in patients with suspected coronary artery disease, highlighting the importance of CCTA in patient risk stratification and prognostic assessment.

Characterization of placentome vascular perfusion in relation to pregnancy associated glycoproteins throughout gestation in pregnant beef heifers

During pregnancy, blood flow to the uterus changes to support fetal demand. Placentomes serve as vascular attachment sites on the placenta for exchange of gases, nutrients, and metabolic products. Non-invasive methods of ultrasonography and biomarkers have been described to assess placental health and fetal viability. Pregnancy associated glycoproteins (PAGs) are produced by the ruminant placenta and are detected in maternal circulation. In cattle, changes in circulating PAG concentrations are associated with embryonic and fetal outcomes. The objective of this study was to determine the association between placentome blood perfusion and circulating PAG concentrations as they relate to the health of the developing fetus. We hypothesized that placentome perfusion and PAG concentration will be positively correlated and associated with neonatal outcome. A prospective, observational study was designed using 26 pregnant, nulliparous, Angus heifers in which PAG concentration and placentome blood perfusion were assessed throughout gestation, with assessment of calving characteristics following parturition. Placentome blood perfusion was visualized at 30-day intervals via transrectal Doppler ultrasonography with power flow function. Ultrasound images were analyzed using ImageJ software to determine the percent area of perfusion and integrated pixel densities. Venous blood was collected and PAG concentrations were determined via serum PAG enzyme-linked immunoassay. Mean placentome blood perfusion increased as gestation advanced. PAG concentrations demonstrated the expected temporal trend, increasing with gestation length, and were positively linearly correlated with placentome perfusion (P < 0.0001). The relationship identified between circulating PAG concentration and placentome blood perfusion suggests the use of transrectal power flow Doppler ultrasonography as a noninvasive technique to determine placental blood flow morphometrics to assess conceptus wellbeing throughout pregnancy.

Efficient bubble/precipitate traffic enables stable seawater reduction electrocatalysis at industrial-level current densities

Seawater electroreduction is attractive for future H2 production and intermittent energy storage, which has been hindered by aggressive Mg2+/Ca2+ precipitation at cathodes and consequent poor stability. Here we present a vital microscopic bubble/precipitate traffic system (MBPTS) by constructing honeycomb-type 3D cathodes for robust anti-precipitation seawater reduction (SR), which massively/uniformly release small-sized H2 bubbles to almost every corner of the cathode to repel Mg2+/Ca2+ precipitates without a break. Noticeably, the optimal cathode with built-in MBPTS not only enables state-of-the-art alkaline SR performance (1000-h stable operation at -1 A cm-2) but also is highly specialized in catalytically splitting natural seawater into H2 with the greatest anti-precipitation ability. Low precipitation amounts after prolonged tests under large current densities reflect genuine efficacy by our MBPTS. Additionally, a flow-type electrolyzer based on our optimal cathode stably functions at industrially-relevant 500 mA cm-2 for 150 h in natural seawater while unwaveringly sustaining near-100% H2 Faradic efficiency. Note that the estimated price (~1.8 US$/kgH2) is even cheaper than the US Department of Energy's goal price (2 US$/kgH2).

Efficient Electrochemical Co-Reduction of Carbon Dioxide and Nitrate to Urea with High Faradaic Efficiency on Cobalt-Based Dual-Sites

Renewable electricity-powered nitrate/carbon dioxide co-reduction reaction toward urea production paves an attractive alternative to industrial urea processes and offers a clean on-site approach to closing the global nitrogen cycle. However, its large-scale implantation is severely impeded by challenging C-N coupling and requires electrocatalysts with high activity/selectivity. Here, cobalt-nanoparticles anchored on carbon nanosheet (Co NPs@C) are proposed as a catalyst electrode to boost yield and Faradaic efficiency (FE) toward urea electrosynthesis with enhanced C-N coupling. Such Co NPs@C renders superb urea-producing activity with a high FE reaching 54.3% and a urea yield of 2217.5 µg h-1 mgcat. -1, much superior to the Co NPs and C nanosheet counterparts, and meanwhile shows strong stability. The Co NPs@C affords rich catalytically active sites, fast reactant diffusion, and sufficient catalytic surfaces-electrolyte contacts with favored charge and ion transfer efficiencies. The theoretical calculations reveal that the high-rate formation of *CO and *NH2 intermediates is crucial for facilitating urea synthesis.

Predictive effect of net water uptake on futile recanalisation in patients with acute large-vessel occlusion stroke

AIM

To determine whether net water uptake (NWU) based on automated software evaluation could predict futile recanalisation in patients with acute anterior circulation large-vessel occlusion (LVO).

MATERIALS AND METHODS

Patients with acute anterior circulation LVO undergoing mechanical thrombectomy in Jinling Hospital were evaluated retrospectively. NWU and other baseline data were evaluated by performing univariate and multivariate analyses. The primary endpoint was 90-day modified Rankin scale score ≥3. A nomogram to predict poor clinical outcomes was developed based on multivariate logistic regression analysis.

RESULTS

Overall, 135 patients who underwent thrombectomy with a TICI grade ≥2b were enrolled. In multivariate logistic regression analysis, the following factors were identified as independent predictors of futile recanalisation: age (odds ratio [OR]: 1.055, 95 % confidence interval [CI]: 1.004-1.110, p=0.035), female (OR: 0.289, 95 % CI: 0.098-0.850, p=0.024), hypertension (OR: 3.182, 95 % CI: 1.160-8.728, p=0.025), high blood glucose level (OR: 1.36, 95 % CI: 1.087-1.701, p=0.007), admission National Institutes of Health Stroke Scale score (OR: 1.082, 95 % CI: 1.003-1.168, p=0.043), and NWU (OR: 1.312, 95 % CI: 1.038-1.659, p=0.023).

CONCLUSIONS

NWU based on Alberta Stroke Program Early Computed Tomography (CT) Score (ASPECTS) could be used to predict the occurrence of futile recanalisation in patients with acute anterior circulation LVO ischaemic stroke.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Observation of WWγ Production and Search for Hγ Production in Proton-Proton Collisions at sqrt[s]=13 TeV

The observation of WWγ production in proton-proton collisions at a center-of-mass energy of 13 TeV with an integrated luminosity of 138  fb^{-1} is presented. The observed (expected) significance is 5.6 (5.1) standard deviations. Events are selected by requiring exactly two leptons (one electron and one muon) of opposite charge, moderate missing transverse momentum, and a photon. The measured fiducial cross section for WWγ is 5.9±0.8(stat)±0.8(syst)±0.7(modeling)  fb, in agreement with the next-to-leading order quantum chromodynamics prediction. The analysis is extended with a search for the associated production of the Higgs boson and a photon, which is generated by a coupling of the Higgs boson to light quarks. The result is used to constrain the Higgs boson couplings to light quarks.

MRI radiomics predicts the efficacy of EGFR-TKI in EGFR-mutant non-small-cell lung cancer with brain metastasis

AIM

To develop and validate models based on magnetic resonance imaging (MRI) radiomics for predicting the efficacy of epidermal growth factor receptor tyrosine kinase inhibitor (EGFR-TKI) in EGFR-mutant non-small-cell lung cancer (NSCLC) patients with brain metastases.

MATERIALS AND METHODS

117 EGFR-mutant NSCLC patients with brain metastases who received EGFR-TKI treatment were included in this study from January 1, 2014 to December 31, 2021. Patients were randomly divided into training and validation cohorts in a ratio of 2:1. Radiomics features extracted from brain MRI were screened by least absolute shrinkage and selection operator (LASSO) algorithm. Logistic regression analysis and Cox proportional hazard regression analysis were used to screen clinical risk factors. Clinical (C), radiomics (R), and combined (C + R) nomograms were constructed in models predicting short-term efficacy and intracranial progression-free survival (iPFS), respectively. Calibration curves, Harrell's concordance index (C-index), and decision curve analysis (DCA) were used to evaluate the performance of models.

RESULTS

Overall response rate (ORR) was 57.3% and median iPFS was 12.67 months. The C + R nomograms were more effective. In the short-term efficacy model, the C-indexes of C + R nomograms in training cohort and validation cohort were 0.860 (0.820-0.901, 95%CI) and 0.843 (0.783-0.904, 95%CI). In iPFS model, the C-indexes of C + R nomograms in training cohort and validation cohort were 0.837 (0.751-0.923, 95%CI) and 0.850 (0.763-0.937, 95%CI).

CONCLUSION

The C + R nomograms were more effective in predicting EGFR-TKI efficacy of EGFR-mutant NSCLC patients with brain metastases than single clinical or radiomics nomograms.

New Structures in the J/ψJ/ψ Mass Spectrum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search is reported for near-threshold structures in the J/ψJ/ψ invariant mass spectrum produced in proton-proton collisions at sqrt[s]=13  TeV from data collected by the CMS experiment, corresponding to an integrated luminosity of 135  fb^{-1}. Three structures are found, and a model with quantum interference among these structures provides a good description of the data. A new structure is observed with a local significance above 5 standard deviations at a mass of 6638_{-38}^{+43}(stat)_{-31}^{+16}(syst)  MeV. Another structure with even higher significance is found at a mass of 6847_{-28}^{+44}(stat)_{-20}^{+48}(syst)  MeV, which is consistent with the X(6900) resonance reported by the LHCb experiment and confirmed by the ATLAS experiment. Evidence for another new structure, with a local significance of 4.7 standard deviations, is found at a mass of 7134_{-25}^{+48}(stat)_{-15}^{+41}(syst)  MeV. Results are also reported for a model without interference, which does not fit the data as well and shows mass shifts up to 150 MeV relative to the model with interference.

Arming Amorphous NiMoO4 on Nickel Phosphide Enables Highly Stable Alkaline Seawater Oxidation

Seawater electrolysis holds tremendous promise for the generation of green hydrogen (H2 ). However, the system of seawater-to-H2 faces significant hurdles, primarily due to the corrosive effects of chlorine compounds, which can cause severe anodic deterioration. Here, a nickel phosphide nanosheet array with amorphous NiMoO4 layer on Ni foam (Ni2 P@NiMoO4 /NF) is reported as a highly efficient and stable electrocatalyst for oxygen evolution reaction (OER) in alkaline seawater. Such Ni2 P@NiMoO4 /NF requires overpotentials of just 343 and 370 mV to achieve industrial-level current densities of 500 and 1000 mA cm-2 , respectively, surpassing that of Ni2 P/NF (470 and 555 mV). Furthermore, it maintains consistent electrolysis for over 500 h, a significant improvement compared to that of Ni2 P/NF (120 h) and Ni(OH)2 /NF (65 h). Electrochemical in situ Raman spectroscopy, stability testing, and chloride extraction analysis reveal that is situ formed MoO4 2- /PO4 3- from Ni2 P@NiMoO4 during the OER test to the electrode surface, thus effectively repelling Cl- and hindering the formation of harmful ClO- .

Prognostic implications of CT-defined ground glass opacity in clinical stage I-IIA grade 3 invasive non-mucinous pulmonary adenocarcinoma

AIM

To investigate the prognostic impact of computed tomography (CT)-defined ground glass opacity (GGO) in patients with clinical stage I-IIA grade 3 invasive non-mucinous pulmonary adenocarcinoma (INPA).

MATERIALS AND METHODS

The present study retrospectively enrolled 187 patients diagnosed with stage I-IIA grade 3 INPA. Their clinicopathological, radiological, and genetic information was evaluated systematically, and a 5-year follow-up was conducted to monitor disease recurrence and mortality. Patients were stratified based on the presence of a GGO component, and the Cox proportional hazard model was employed to assess the influence of clinicopathological factors and genetic variables on tumour outcomes. Recurrence-free survival (RFS) and overall survival (OS) were estimated using the Kaplan-Meier method and compared using the log-rank test.

RESULTS

Significant differences were observed in both OS and RFS based on the presence of a GGO component. The group with GGO exhibited superior OS (p=0.002) and RFS (p=0.029). Multivariate analysis revealed that the presence of a GGO component (hazard ratio [HR] = 0.412, 95% confidence interval [CI]: 0.177-0.959, p=0.040), clinical T2 stage (HR=2.473, 95% CI: 1.498-4.083, p<0.001), pathological N2 stage (HR=3.049, 95% CI: 1.800-5.167, p<0.001), and mixed high-grade patterns (HR=2.392, 95% CI: 1.418-4.036, p=0.001) were predictors of RFS.

CONCLUSION

The presence of a GGO component is strongly associated with a favourable prognosis in grade 3 INPA.

Abnormal cell wall structure caused by boron nutrient imbalance in orchards could affect psyllid feeding behaviour, resulting in epidemic variation of Asian citrus psyllid

The control of Huanglongbing (HLB), one of the most destructive pests of citrus, relies heavily on the reduction of Asian citrus psyllid (ACP), Diaphorina citri Kuwayama. An in-depth understanding of ACP feeding behaviours among citrus plants is urgent for comprehensive management of orchards. An investigation was conducted in 37 citrus orchards in HLB epidemic areas, sampling shoots in the area with aggregation feeding of ACP (ACPf) and shoots in a neighbouring area without ACP feeding (CK), to study the interaction between leaf chemical composition and ACP psyllid feeding behaviours. Results of FTIR showed a strong absorption peak intensity, mainly representing functional groups originating from cell wall components in the leaf with ACP feeding. As compared with the control, cell wall components, such as alkali-soluble pectin, water-soluble pectin, total soluble pectin, cellulose, and hemicellulose, of the cell wall of ACPf increased by 134.0%, 14.0%, 18.0%, 12.5%, and 20.35%, respectively. These results suggest that cell wall mechanical properties significantly decreased in the term of decreases in pectin performance and cellulose mechanical properties. In addition, there was a remarkably lower boron (B) content in leaves and cell wall components with ACP feeding. Further analysis indicated that leaf B content significantly affected leaf cell wall components. Taken together, we provide evidence to demonstrate that the regional distribution of nutrient imbalance in orchards could affect psyllid feeding behaviour by weakening the cell wall structure, resulting in epidemic variation in ACP. This could help us to understand the management of psyllid infections in orchards with unbalanced nutrition.

[Infection status and Molecular types of Rhinovirus among Cases of Acute Respiratory Tract Infections in Luohe City, Henan Province, from 2017 to 2022]

Objective: To understand the infection status and molecular types of rhinovirus (RV) among cases of Acute Respiratory Infections (ARIs) in Luohe City, Henan Province, from 2017 to 2022. Methods: From October 2017 to June 2022, clinical and epidemiological data were collected from 2 270 cases of ARIs at Luohe Central Hospital in Henan Province. Throat swab specimens were obtained from these cases. Real-time quantitative polymerase chain reaction (qPCR) was used to screen for RV-positive specimens. Subsequently, the positive samples were subjected to nested reverse transcription polymerase chain reaction (nested RT-PCR) to amplify the full-length VP1 region. Using the MEGA software, along with 169 RV reference strains recommended by the International Committee on Taxonomy of Viruses, a phylogenetic tree was constructed to determine RV types. Results: Among the 2 270 cases of ARIs, there were 1 283 male cases (56.52%). The median age (Q1, Q3) was 3 (1, 6) years, with the population under 5 years old accounting for 68.59% (1 557/2 270). RV was detected in 137 cases (6.04%), of which 68 cases (49.64%) showed co-detection with other viruses, with the most common being co-detection with enterovirus, accounting for 14.60% (20/137). The RV detection rates in the age groups of 0~4 years, 5~14 years, 15~59 years, and≥60 years were 6.42% (100/1 557), 4.69% (21/448), 3.80% (6/158), and 9.35% (10/107), respectively, with no statistically significant differences (χ2=5.310, P=0.150). The overall detection rates of RV before (2017-2019) and during (2020-2022) the COVID-19 pandemic showed no statistically significant difference (χ2=1.823, P=0.177). A total of 109 VP1 sequences were obtained, including 62 types. Among them, RV-A, RV-B, and RV-C had 42, 3, and 17 types respectively. Conclusion: RV is one of the predominant pathogens in ARIs cases in Luohe City, Henan Province, from 2017 to 2022. Multiple types of RV co-circulate without any apparent dominant type.

Tungstate Intercalated NiFe Layered Double Hydroxide Enables Long-Term Alkaline Seawater Oxidation

Renewable electricity-driven seawater splitting presents a green, effective, and promising strategy for building hydrogen (H2 )-based energy systems (e.g., storing wind power as H2 ), especially in many coastal cities. The abundance of Cl- in seawater, however, will cause severe corrosion of anode catalyst during the seawater electrolysis, and thus affect the long-term stability of the catalyst. Herein, seawater oxidation performances of NiFe layered double hydroxides (LDH), a classic oxygen (O2 ) evolution material, can be boosted by employing tungstate (WO4 2- ) as the intercalated guest. Notably, insertion of WO4 2- to LDH layers upgrades the reaction kinetics and selectivity, attaining higher current densities with ≈100% O2 generation efficiency in alkaline seawater. Moreover, after a 350 h test at 1000 mA cm-2 , only trace active chlorine can be detected in the electrolyte. Additionally, O2 evolution follows lattice oxygen mechanism on NiFe LDH with intercalated WO4 2- .

Search for Scalar Leptoquarks Produced via τ-Lepton-Quark Scattering in pp Collisions at sqrt[s]=13 TeV

The first search for scalar leptoquarks produced in τ-lepton-quark collisions is presented. It is based on a set of proton-proton collision data recorded with the CMS detector at the LHC at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138  fb^{-1}. The reconstructed final state consists of a jet, significant missing transverse momentum, and a τ lepton reconstructed through its hadronic or leptonic decays. Limits are set on the product of the leptoquark production cross section and branching fraction and interpreted as exclusions in the plane of the leptoquark mass and the leptoquark-τ-quark coupling strength.

Synergistically Coupling Atomic-Level Defect-Manipulation and Nanoscopic-Level Interfacial Engineering Enables Fast and Durable Sodium Storage

Through inducing interlayer anionic ligands and functionally modifying conductive carbon-skeleton on the transition metal chalcogenides (TMCs) parent to achieve atomic-level defect-manipulation and nanoscopic-level architecture design is of great significance, which can broaden interlayer distance, optimize electronic structure, and mitigate structural deformation to endow high-efficiency battery performance of TMCs. Herein, an intriguing 3D biconcave hollow-tyre-like anode constituted by carbon-packaged defective-rich SnSSe nanosheet grafting onto Aspergillus niger spores-derived hollow-carbon (ANDC@SnSSe@C) is reported. Systematically experimental investigations and theoretical analyses forcefully demonstrate the existence of anion Se ligand and outer-carbon all-around encapsulation on the ANDC@SnSSe@C can effectively yield abundant structural defects and Na+ -reactivity sites, accelerate rapid ion migration, widen interlayer spacing, as well as relieve volume expansion, thus further resolving the critical issues throughout the charge-discharge processes. As anticipated, as-fabricated ANDC@SnSSe@C anode contributes extraordinary reversible capacity, wonderful cyclic lifespan with 83.4% capacity retention over 2000 cycles at 20.0 A g-1 , and exceptional rate capability. A series of correlated kinetic investigations and ex situ characterizations deeply reveal the underlying springheads for the ion-transport kinetics, as well as synthetically elucidate phase-transformation mechanism of the ANDC@SnSSe@C. Furthermore, the ANDC@SnSSe@C-based sodium ion full cell and hybrid capacitor offer high-capacity contribution and remarkable energy-density output, indicative of its great practicability.

Search for Inelastic Dark Matter in Events with Two Displaced Muons and Missing Transverse Momentum in Proton-Proton Collisions at sqrt[s]=13 TeV

A search for dark matter in events with a displaced nonresonant muon pair and missing transverse momentum is presented. The analysis is performed using an integrated luminosity of 138  fb^{-1} of proton-proton (pp) collision data at a center-of-mass energy of 13 TeV produced by the LHC in 2016-2018. No significant excess over the predicted backgrounds is observed. Upper limits are set on the product of the inelastic dark matter production cross section σ(pp→A^{'}→χ_{1}χ_{2}) and the decay branching fraction B(χ_{2}→χ_{1}μ^{+}μ^{-}), where A^{'} is a dark photon and χ_{1} and χ_{2} are states in the dark sector with near mass degeneracy. This is the first dedicated collider search for inelastic dark matter.

Boosting electrocatalytic performance via electronic structure regulation for acidic oxygen evolution

High-purity hydrogen produced by water electrolysis has become a sustainable energy carrier. Due to the corrosive environments and strong oxidizing working conditions, the main challenge faced by acidic water oxidation is the decrease in the activity and stability of anodic electrocatalysts. To address this issue, efficient strategies have been developed to design electrocatalysts toward acidic OER with excellent intrinsic performance. Electronic structure modification achieved through defect engineering, doping, alloying, atomic arrangement, surface reconstruction, and constructing metal-support interactions provides an effective means to boost OER. Based on introducing OER mechanism commonly present in acidic environments, this review comprehensively summarizes the effective strategies for regulating the electronic structure to boost the activity and stability of catalytic materials. Finally, several promising research directions are discussed to inspire the design and synthesis of high-performance acidic OER electrocatalysts.

Fabrication of a hierarchical NiTe@NiFe-LDH core-shell array for high-efficiency alkaline seawater oxidation

Herein, a hierarchical NiTe@NiFe-LDH core-shell array on Ni foam (NiTe@NiFe-LDH/NF) demonstrates its effectiveness for oxygen evolution reaction (OER) in alkaline seawater electrolyte. This NiTe@NiFe-LDH/NF array showcases remarkably low overpotentials of 277 mV and 359 mV for achieving current densities of 100 and 500 mA cm-2, respectively. Also, it shows a low Tafel slope of 68.66 mV dec-1. Notably, the electrocatalyst maintains robust stability over continuous electrolysis for at least 50 h at 100 mA cm-2. The remarkable performance and hierarchical structure advantages of NiTe@NiFe-LDH/NF offer innovative insights for designing efficient seawater oxidation electrocatalysts.

Luminosity determination using Z boson production at the CMS experiment

The measurement of Z boson production is presented as a method to determine the integrated luminosity of CMS data sets. The analysis uses proton-proton collision data, recorded by the CMS experiment at the CERN LHC in 2017 at a center-of-mass energy of 13Te V . Events with Z bosons decaying into a pair of muons are selected. The total number of Z bosons produced in a fiducial volume is determined, together with the identification efficiencies and correlations from the same data set, in small intervals of 20pb - 1 of integrated luminosity, thus facilitating the efficiency and rate measurement as a function of time and instantaneous luminosity. Using the ratio of the efficiency-corrected numbers of Z bosons, the precisely measured integrated luminosity of one data set is used to determine the luminosity of another. For the first time, a full quantitative uncertainty analysis of the use of Z  bosons for the integrated luminosity measurement is performed. The uncertainty in the extrapolation between two data sets, recorded in 2017 at low and high instantaneous luminosity, is less than 0.5%. We show that the Z boson rate measurement constitutes a precise method, complementary to traditional methods, with the potential to improve the measurement of the integrated luminosity.

Measurement of the production cross section for a W boson in association with a charm quark in proton-proton collisions at s=13TeV

The strange quark content of the proton is probed through the measurement of the production cross section for a W boson and a charm (c) quark in proton-proton collisions at a center-of-mass energy of 13Te V . The analysis uses a data sample corresponding to a total integrated luminosity of 138fb - 1 collected with the CMS detector at the LHC. The W bosons are identified through their leptonic decays to an electron or a muon, and a neutrino. Charm jets are tagged using the presence of a muon or a secondary vertex inside the jet. The W + c production cross section and the cross section ratio R c ± = σ ( W + + c ¯ ) / σ ( W - + c ) are measured inclusively and differentially as functions of the transverse momentum and the pseudorapidity of the lepton originating from the W boson decay. The precision of the measurements is improved with respect to previous studies, reaching 1% in R c ± = 0.950 ± 0.005 (stat) ± 0.010 (syst) . The measurements are compared with theoretical predictions up to next-to-next-to-leading order in perturbative quantum chromodynamics.

Carbon Oxyanion Self-Transformation on NiFe Oxalates Enables Long-Term Ampere-Level Current Density Seawater Oxidation

Seawater electrolysis is an attractive way of making H2 in coastal areas, and NiFe-based materials are among the top options for alkaline seawater oxidation (ASO). However, ample Cl- in seawater can severely corrode catalytic sites and lead to limited lifespans. Herein, we report that in situ carbon oxyanion self-transformation (COST) from oxalate to carbonate on a monolithic NiFe oxalate micropillar electrode allows safeguard of high-valence metal reaction sites in ASO. In situ/ex situ studies show that spontaneous, timely, and appropriate COST safeguards active sites against Cl- attack during ASO even at an ampere-level current density (j). Our NiFe catalyst shows efficient and stable ASO performance, which requires an overpotential as low as 349 mV to attain a j of 1 A cm-2 . Moreover, the NiFe catalyst with protective surface CO3 2- exhibits a slight activity degradation after 600 h of electrolysis under 1 A cm-2 in alkaline seawater. This work reports effective catalyst surface design concepts at the level of oxyanion self-transformation, acting as a momentous step toward defending active sites in seawater-to-H2 conversion systems.

Global, regional, and national trends in osteoarthritis disability-adjusted life years (DALYs) from 1990 to 2019: a comprehensive analysis of the global burden of disease study

OBJECTIVES

This study aimed to investigate global, regional, and national trends in osteoarthritis disability-adjusted life years (DALYs) from 1990 to 2019, identify the burden of osteoarthritis in different age groups, and assess age, period, and cohort effects on osteoarthritis DALYs.

STUDY DESIGN

A comprehensive analysis of the Global Burden of Disease Study 2019 data, covering 204 countries and territories.

METHODS

We conducted a comprehensive analysis using data from the Global Burden of Disease Study 2019, encompassing 204 countries and territories. Age-standardized DALY rates were calculated, and the age-period-cohort model was employed to examine the age, period, and cohort effects on osteoarthritis DALYs. The annual percentage change (APC) and average annual percentage change (AAPC) were estimated to evaluate trends in DALYs.

RESULTS

Globally, osteoarthritis DALYs increased by 114.48 % between 1990 and 2019, with an age-standardized DALY rate growth of 3.3 %. The largest relative growth in DALYs occurred in Middle and Low-middle Socio-Demographic Index (SDI) regions. DALYs increased significantly in almost all age-specific groups, particularly among 45-74 years old age groups. Age, period, and cohort effects analysis revealed a general increase in osteoarthritis DALYs risk over time, with some variations by SDI quintiles and sex. The steepest increase in DALYs occurred in the 30-34 years age group, and the trend attenuated with increasing age. Males showed significantly slower DALYs growth than females in age groups with non-overlapping 95 % confidence intervals. Age effects were consistently higher in females, especially in high-SDI countries. Period and cohort effects generally demonstrated a climbing risk of osteoarthritis DALYs across different SDI quintiles, with more pronounced increases in lower-SDI regions.

CONCLUSIONS

Our findings highlight the substantial and increasing burden of osteoarthritis at global, regional, and national levels from 1990 to 2019, with significant variations by age, period, and cohort. These results underscore the importance of developing targeted public health strategies and interventions to address the growing impact of osteoarthritis, particularly in lower-SDI regions and among older populations.

Hierarchical Architecture Engineering of Branch-Leaf-Shaped Cobalt Phosphosulfide Quantum Dots: Enabling Multi-Dimensional Ion-Transport Channels for High-Efficiency Sodium Storage

New-fashioned electrode hosts for sodium-ion batteries (SIBs) are elaborately engineered to involve multifunctional active components that can synergistically conquer the critical issues of severe volume deformation and sluggish reaction kinetics of electrodes toward immensely enhanced battery performance. Herein, it is first reported that single-phase CoPS, a new metal phosphosulfide for SIBs, in the form of quantum dots, is successfully introduced into a leaf-shaped conductive carbon nanosheet, which can be further in situ anchored on a 3D interconnected branch-like N-doped carbon nanofiber (N-CNF) to construct a hierarchical branch-leaf-shaped CoPS@C@N-CNF architecture. Both double carbon decorations and ultrafine crystal of the CoPS in-this exquisite architecture hold many significant superiorities, such as favorable train-relaxation, fast interfacial ion-migration, multi-directional migration pathways, and sufficiently exposed Na+ -storage sites. In consequence, the CoPS@C@N-CNF affords remarkable long-cycle durability over 10 000 cycles at 20.0 A g-1 and superior rate capability. Meanwhile, the CoPS@C@N-CNF-based sodium-ion full cell renders the potential proof-of-feasibility for practical applications in consideration of its high durability over a long-term cyclic lifespan with remarkable reversible capacity. Moreover, the phase transformation mechanism of the CoPS@C@N-CNF and fundamental springhead of the enhanced performance are disclosed by in situ X-ray diffraction, ex situ high-resolution TEM, and theoretical calculations.

Recent Advances of Halloysite Nanotubes in Biomedical Applications

Halloysite nanotubes (HNTs) have emerged as a highly regarded choice in biomedical research due to their exceptional attributes, including superior loading capacity, customizable surface characteristics, and excellent biocompatibility. HNTs feature tubular structures comprising alumina and silica layers, endowing them with a large surface area and versatile surface chemistries that facilitate selective modifications. Moreover, their substantial pore volume and wide range of pore sizes enable efficient entrapment of diverse functional molecules. This comprehensive review highlights the broad biomedical application spectrum of HNTs, shedding light on their potential as innovative and effective therapeutic agents across various diseases. It emphasizes the necessity of optimizing drug delivery techniques, developing targeted delivery systems, rigorously evaluating biocompatibility and safety through preclinical and clinical investigations, exploring combination therapies, and advancing scientific understanding. With further advancements, HNTs hold the promise to revolutionize the pharmaceutical industry, opening new avenues for the development of transformative treatments.

Preoperative diagnostic value of coronary CT angiography in acute Stanford type A aortic dissection involving the coronary arteries

AIM

To assess the diagnostic value of coronary computed tomography angiography (CCTA) in acute type A aortic dissection (ATAAD) with coronary artery involvement and to evaluate whether CCTA could provide potentially useful information for selecting the surgical method.

MATERIALS AND METHODS

Patients with ATAAD treated from January 2019 to December 2020 were reviewed retrospectively. Involvement of the coronary arteries based on CCTA findings were grouped into three major types and five subtypes. Interobserver and intraobserver diagnostic agreement for five subtypes were determined. The patients were divided into the coronary artery bypass grafting (CABG) and non-CABG groups, and the proportions of the five subtypes between the two groups were compared.

RESULTS

A total of 95 patients were enrolled in this study. Interobserver and intraobserver diagnostic agreement were both substantial in the left and right coronary arteries. Overall, the proportions of the five subtypes of coronary artery involvement were significantly different between the two groups (p<0.001). The proportion of Type A was elevated in the non-CABG group compared with the CABG group (22.6% versus 71.9%); by contrast, the proportions of Type B1 (35.5% versus 14.1%), Type B2 (19.4% versus 10.9%), Type C1 (6.5% versus 0%), and Type C2 (16.1% versus 3.1%) were elevated in the CABG group.

CONCLUSION

CCTA is reliable in evaluating coronary artery involvement by ATAAD. The present retrospective study indicated that CABG may be considered if the intimal flap disrupts the coronary orifice and causes luminal stenosis >50%, particularly Type B, or if an intimal tear occurs in the coronary orifice (Type C), which deserve further validation through prospective studies.

Probing Small Bjorken-x Nuclear Gluonic Structure via Coherent J/ψ Photoproduction in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

Quasireal photons exchanged in relativistic heavy ion interactions are powerful probes of the gluonic structure of nuclei. The coherent J/ψ photoproduction cross section in ultraperipheral lead-lead collisions is measured as a function of photon-nucleus center-of-mass energies per nucleon (W_{γN}^{Pb}) over a wide range of 40 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Amorphous Co-Mo-P film on nickel foam: a superior bifunctional electrocatalyst for alkaline seawater splitting

Seawater splitting is a compelling avenue to produce abundant hydrogen, which requires high-performance and cost-effective catalysts. Constructing bimetallic transition metal phosphides is a feasible strategy to meet the challenge. Here, an amorphous Co-Mo-P film supported on nickel foam (Co-Mo-P/NF) electrode is developed with bifunctional properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline seawater. Corresponding results indicate that the introduction of Mo can improve the active sites and regulate the intrinsic activity. Such a Co-Mo-P/NF behaves with prominent electrocatalytic activity towards both HER and OER, demanding low overpotentials of 193 and 352 mV at 100 mA cm‒2in alkaline seawater, respectively. Furthermore, the assembled electrolyzer demands a pronounced overall seawater splitting activity with a low cell voltage of 1.76 V to deliver 100 mA cm-2presenting excellent durability without obvious attenuation after 24 h continuous stability test. This work expands the horizon to develop transition metal-phosphorus electrocatalysts with robust and efficient activity for overall seawater splitting.

Bifunctional bimetallic oxide nanowires for high-efficiency electrosynthesis of 2,5-furandicarboxylic acid and ammonia

It is an appealing avenue for electrosyntheis of high-valued chemicals at both anode and cathode by coupling 5-hydroxymethylfurfural (HMF) oxidation and nitrate reduction reactions simultaneously, while the development such bifunctional electrocatalysts is still in its infancy with dissatisfied selectivity and low yield rate. Here, we first report that Zn-doped Co3O4 nanowires array can be served as an efficient and robust dual-functional catalyst for HMF oxidation and nitrate reduction at ambient conditions. Specifically, the catalyst shows a faradaic efficiency of 91 % and a yield rate of 241.2 μmol h-1 cm-2 for 2,5-furandicarboxylic acid formation together with a high conversion of nearly 100 % at a potential of 1.40 V. It also displays good cycling stability. Besides, the catalyst is capable of catalyzing the reduction of nitrate to NH3, giving a maximal faradaic efficiency of 92 % and a peak NH3 yield rate of 4.65 mg h-1 cm-2 at a potential of -0.70 V. These results surpass those obtained using pristine Co3O4 and are comparable to those of state-of-the-art electrocatalysts. Moreover, the catalyst is further employed as the cathode catalyst to assemble a Zn-nitrate battery, giving a peak power density of 5.24 mW cm-2 and a high yield rate of 0.72 mg h-1 cm-2. Theoretical simulations further reveal that Zn-doping favors the adsorption and dissociation of nitrate and HMF species and reduces the energy barrier as well. Our work demonstrates the potential interest of Co3O4-based materials for the highly selective production of valuable feedstocks via ambient electrolysis.

[Analysis of adverse neonatal outcomes in pregnant women with positive anti-Ro/SSA and anti-La/SSB antibodies]

Objective: To investigate the relationship between positive anti-Ro/Sjögren syndrome antigen type A (SSA) antibody and anti-La/Sjögren syndrome antigen type B (SSB) antibody in pregnant women and neonatal adverse outcomes. Methods: This study was a retrospective study, and 145 deliveries of 136 anti-Ro/SSA and anti-La/SSB antibody positive pregnant women were selected who had prenatal examination and delivered in Peking University First Hospital from January 2017 to June 2022. According to whether adverse neonatal outcomes occurred, 145 deliveries were divided into adverse outcome group (26 cases) and no adverse outcome group (119 cases). According to the time when anti-Ro/SSA and anti-La/SSB antibodies were found positive, 145 deliveries were divided into the antibody positive during pregnancy group (69 cases) and the pre-pregnancy antibody positive group (76 cases). The pregnancy outcomes, treatment and maternal and infant antibody levels of pregnant women between the adverse outcome group and no adverse outcome group, between antibody positive during pregnancy group and the pre-pregnancy antibody positive group were compared. Results: (1) Most of the pregnant women with positive anti-Ro/SSA and anti-La/SSB antibodies were diagnosed as undifferentiated connective tissue disease, accounting for 40.4% (55/136), followed by Sjogren's syndrome (25.0%, 34/136), systemic lupus erythematosus (23.5%, 32/136), antiphospholipid antibody syndrome (6.6%, 9/136), idiopathic thrombocytopenic purpura (1.5%, 2/136), and 4 cases were not diagnosed. (2) The titers of anti-Ro/SSA and anti-La/SSB antibodies in the first trimester and the second trimester were compared, and there were no statistical significances (all P>0.05). (3) The proportion of high level anti-Ro/SSA antibody (>100 kU/L), positive level of anti-La/SSB antibody and positive rate of anti-La/SSB antibody in the adverse outcome group were higher than those in the no adverse outcome group, and the birth weight of newborns and live birth rate in the adverse outcome group were lower than that in the no adverse outcome group, all with statistical significances (all P<0.05). The anti-Ro/SSA antibody level, the proportion of drug treatment (hydroxychloroquine, glucocorticoid, gamma globulin), the incidence of fetal growth restriction (FGR), the rate of preterm birth, and the positive level of anti-Ro/SSA and anti-La/SSB antibodies in newborns were compared between the two groups, and there were no statistically significant differences (all P>0.05). (4) The anti-Ro/SSA antibody level of pregnant women in the pre-pregnancy antibody positive group, the proportion of hydroxychloroquine and glucocorticoid treatment, and the anti-Ro/SSA antibody positive rate of newborns were higher, while the incidence of FGR and gamma globulin treatment rate of newborns in the antibody positive during pregnancy group were higher, respectively, and the differences were statistically significant (all P<0.05). The levels of anti-La/SSB antibodies in pregnant women, anti-Ro/SSA and anti-La/SSB antibodies in newborns, the positive rate of anti-La/SSB antibodies in newborns and the incidence of adverse outcomes were compared between the antibody positive during pregnancy group and the pre-pregnancy antibody positive group, and there were no statistical significances (all P>0.05). Conclusions: High concentrations of anti-Ro/SSA antibodies and co-positive anti-La/SSB antibodies during pregnancy may increase the incidence of adverse neonatal outcomes. There is no significant difference in the incidence of adverse neonatal outcomes between antibody positive pregnant women and antibody positive pregnant women who were first found during pregnancy after comprehensive treatment in the rheumatology and immunology department.

High-Efficiency Electroreduction of Nitrite to Ammonia on Ni Nanoparticles Strutted 3D Honeycomb-Like Porous Carbon Framework

Electroreduction of nitrite (NO2 - ) to ammonia (NH3 ) provides a sustainable approach to yield NH3 , whilst eliminating NO2 - contaminants. In this study, Ni nanoparticles strutted 3D honeycomb-like porous carbon framework (Ni@HPCF) is fabricated as a high-efficiency electrocatalyst for selective reduction of NO2 - to NH3 . In 0.1 M NaOH with NO2 - , such Ni@HPCF electrode obtains a significant NH3 yield of 12.04 mg h-1  mgcat. -1 and a Faradaic efficiency of 95.1 %. Furthermore, it exhibits good long-term electrolysis stability.

Hyperon Polarization along the Beam Direction Relative to the Second and Third Harmonic Event Planes in Isobar Collisions at sqrt[s_{NN}]=200 GeV

The polarization of Λ and Λ[over ¯] hyperons along the beam direction has been measured relative to the second and third harmonic event planes in isobar Ru+Ru and Zr+Zr collisions at sqrt[s_{NN}]=200  GeV. This is the first experimental evidence of the hyperon polarization by the triangular flow originating from the initial density fluctuations. The amplitudes of the sine modulation for the second and third harmonic results are comparable in magnitude, increase from central to peripheral collisions, and show a mild p_{T} dependence. The azimuthal angle dependence of the polarization follows the vorticity pattern expected due to elliptic and triangular anisotropic flow, and qualitatively disagrees with most hydrodynamic model calculations based on thermal vorticity and shear induced contributions. The model results based on one of existing implementations of the shear contribution lead to a correct azimuthal angle dependence, but predict centrality and p_{T} dependence that still disagree with experimental measurements. Thus, our results provide stringent constraints on the thermal vorticity and shear-induced contributions to hyperon polarization. Comparison to previous measurements at RHIC and the LHC for the second-order harmonic results shows little dependence on the collision system size and collision energy.

Boosting Alkaline Seawater Oxidation of CoFe-layered Double Hydroxide Nanosheet Array by Cr Doping

The pursuit of stable and efficient electrocatalysts toward seawater oxidation is of great interest, yet it poses considerable challenges. Herein, the utilization of Cr-doped CoFe-layered double hydroxide nanosheet array is reported on nickel-foam (Cr-CoFe-LDH/NF) as an efficient electrocatalyst for oxygen evolution reaction in alkaline seawater. The Cr-CoFe-LDH/NF catalyst can achieve current densities of 500 and 1000 mA cm -2 with remarkably low overpotentials of only 334 and 369 mV, respectively. Furthermore, it maintains at least 100 h stability when operated at 500 mA cm-2 .

The new small-angle X-ray scattering beamline for materials research at PETRA III: SAXSMAT beamline P62

The SAXSMAT beamline P62 (Small-Angle X-ray Scattering beamline for Materials Research) is a new beamline at the high-energy storage ring PETRA III at DESY. This beamline is dedicated to combined small- and wide-angle X-ray scattering (SAXS/WAXS) techniques for both soft and hard condensed matter systems. It works mainly in transmission geometry. The beamline covers an energy range from 3.5 keV to 35.0 keV, which fulfills the requirements of the user community to perform anomalous scattering experiments. Mirrors are used to reduce the intensity of higher harmonics. Furthermore, the mirrors and 2D compound refracting lenses can focus the beam down to a few micrometres at the sample position. This option with the high photon flux enables also SAXS/WAXS tensor tomography experiments to be performed at this new beamline in a relatively short time. The first SAXS/WAXS pattern was collected in August 2021, while the first user experiment was carried out two months later. Since January 2022 the beamline has been in regular user operation mode. In this paper the beamline optics and the SAXS/WAXS instrument are described and two examples are briefly shown.

Clinical characteristics and prognostic factors of solitary and multiple adult gliomas: a retrospective study based on propensity score matching

OBJECTIVE

This study aims to compare the survival and prognostic factors in patients with solitary gliomas to those with multiple to improve the understanding of multiple gliomas and investigate their heterogeneous dissemination pathways.

PATIENTS AND METHODS

Data on 358 patients diagnosed with adult gliomas confirmed by postoperative pathology were retrospectively collected and analyzed. The clinical characteristics, survival rates and prognosis of patients were analyzed by propensity score matching (PSM).

RESULTS

Between the two groups, statistically significant differences were identified in multiple general clinical characteristics, including age, pathological grade, lesion location, 1p19q co-deletion, IDH1 mutation, MGMT promoter methylation expression rate, p53 mutation and NF1 mutation (p<0.05). Before PSM, the mOS for patients with multiple gliomas was shorter than that for those with solitary (p=0.0045). Multivariate Cox regression analysis revealed that age, pathological grade IV, and absence of concurrent chemotherapy were significant risk factors affecting OS. Pathological grade IV, ki-67 expression range of 25-50%, and absence of concurrent chemotherapy were identified as risk factors for PFS. After PSM, the prognostic factors associated with OS were age and concurrent chemotherapy, while those associated with PFS were ki-67 expression range of 50-75% and lesion located in the right frontal lobe (p<0.05).

CONCLUSIONS

The prognosis for multiple gliomas is extremely poor, which is related to the fact that the most common pathological types are glioblastomas and the surgical procedure is challenging. Concurrent chemotherapy and radiotherapy are the strongest protective prognostic factors, and the differences in their molecular pathology expression compared to solitary gliomas remain for further investigation.

Measurement of the top quark mass using a profile likelihood approach with the lepton + jets final states in proton-proton collisions at s=13TeV

The mass of the top quark is measured in 36.3fb - 1 of LHC proton-proton collision data collected with the CMS detector at s = 13 Te V . The measurement uses a sample of top quark pair candidate events containing one isolated electron or muon and at least four jets in the final state. For each event, the mass is reconstructed from a kinematic fit of the decay products to a top quark pair hypothesis. A profile likelihood method is applied using up to four observables per event to extract the top quark mass. The top quark mass is measured to be 171.77 ± 0.37 Ge V . This approach significantly improves the precision over previous measurements.

A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at s=13TeV

A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at s = 13 Te V by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb - 1 . The 95% confidence level upper limit set on the branching fraction of the 125Ge V Higgs boson to invisible particles, B ( H → inv ) , is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B ( H → inv ) searches carried out at s = 7 , 8, and 13Te V in complementary production modes. The combined upper limit at 95% confidence level on B ( H → inv ) is 0.15 (0.08 expected).

Observation of τ Lepton Pair Production in Ultraperipheral Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

We present an observation of photon-photon production of τ lepton pairs in ultraperipheral lead-lead collisions. The measurement is based on a data sample with an integrated luminosity of 404  μb^{-1} collected by the CMS experiment at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=5.02  TeV. The γγ→τ^{+}τ^{-} process is observed for τ^{+}τ^{-} events with a muon and three charged hadrons in the final state. The measured fiducial cross section is σ(γγ→τ^{+}τ^{-})=4.8±0.6(stat)±0.5(syst)  μb, where the second (third) term corresponds to the statistical (systematic) uncertainty in σ(γγ→τ^{+}τ^{-}) in agreement with leading-order QED predictions. Using σ(γγ→τ^{+}τ^{-}), we estimate a model-dependent value of the anomalous magnetic moment of the τ lepton of a_{τ}=0.001_{-0.089}^{+0.055}.

Fe3O4 nanoparticle-decorated 3D pinewood-derived carbon for high-efficiency electrochemical nitrate reduction to ammonia

Electrochemical nitrate (NO3-) reduction is a sustainable pathway for ambient ammonia (NH3) synthesis while eliminating NO3- pollutants in water. However, the NO3- reduction reaction (NO3-RR) involves a complicated eight-electron transfer process, which needs highly selective and efficient electrocatalysts. This work describes the synthesis of Fe3O4 nanoparticle-decorated 3D pinewood-derived carbon (Fe3O4/PC) as a high-efficiency catalyst for the electroreduction of NO3- to NH3 at ambient reaction conditions. When tested in 0.1 M NaOH containing 0.1 M NO3-, the Fe3O4/PC obtains a large NH3 yield of 394.8 μmol h-1 cm-2 and high faradaic efficiency (FE) of 91.6% at -0.4 V. Significantly, Fe3O4/PC also delivers high stability.